Business partner and R3 customer mapping table

Hi
Can anyone please tell the Mapping table in CRM and R3; where the Business partner number(CRM) and R3 customer
number are mapped?
Thanks in advance!!
Ashish.

Hi Ashish,
'CRMM_LOCMAP' is the R/3 CRM Business partner Mapping table based on APO Location.
'CRMM_BUT_CONTNO' is the outbound mapping for R/3 contact person, 'CRMM_BUT_CUSTNO' is the outbound mapping for R/3 Customer.
If you can tell me specifically what is that you are looking for, I might be able to tell the exact table.
Jash.

Similar Messages

Relation between Business Partner and User

Hi everyone.
Where can i found the relation between the business partnes and user in the tables of CRM application.
Thanks.
Mauricio N.

But in the database where is located this data, which is the table in the database that has the relation between business partners and users???
Thanks,
Mauricio N.

Difference between Business Partner and Customer in ISU?

Is there any difference between business partner and customer in ISU?
if yes then wht?

Hi,
Yes Business Partner is a broad term used in ISU for various roles. A business Partner can be a Customer for company, an employee or even a vendor.
It depends on what role business partner has been given. Initially by default all Business Partners are assigned a default role "Business Partner (Gen.)". Later it can be changed to any role like Employee, Vendor, etc.
Business Partner with role "Contract Partner" is normally the end Customer which I believe you are referring to.
For more info on Business Partner, please check below link:
[Business Partner Master Data|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABP/CABP.pdf]
Thanks.
Ravi

Difference between Business Partner and Customer Master repository

What is the difference between Business Partner and Customer Master repository ?
Is the Business Partner repository to be used in case CRM is also in landscape ? or Customer master repository is good enough ?
Sandesh

Hi,
If the landscape has both CRM and SAP ECC a business partner repository model should be good.
If it has ECC alone.a Customer Repository is needed.
But when there are many legacy systems which also contains master data fields, the standard business repository provided by SAP wont provide a good solution as it wont cover the legacy master fields..In this case its better to go for a customized repository and you can use the standard repository as a reference.
Thanks

Table that stores the business role and user id mapping

Hi,
i want to know the table that stores the Business role and the business role and user id mapping in CRM system.
Thanks in Advance.
Regards,
Pricy

Hi Mary,
There is no direct table but there is a way to find it.
HRP1263 is the table where business roles are stored when maintained at org level. These are stored against the Position.
For getting user ID and position linkage refer table HRP1001.
In HRP1001 table use below criteria to get the User and Position.
OTYPE = CP
SCLAS = US
SOBID = User ID
ENDDA = 31.12.9999
Get the OBJID
Query the HRP1001 table again with following
OTYPE = CP
OBJID = OBJID from above Query
ENDDA = 31.12.9999
SCLAS = S
SOBID = Thats Position.
Pass the position to HRP1263 as below.
OTYPE = S
OBJID = POSITION
PROFILE - Thats business role assigned for the given position and user.
Hope this is helpful.
Regards,
Naresh

Mapping between Business Partner and BDoc type BUPA_MAIN

Hi Experts,
When creating a business partner system automatically generates BUPA_MAIN as its BDoc type.
Can some one please let me know the mapping between business partner and the BDoc type BUPA_MAIN.
I mean to say how BUPA_MAIN(BDoc type) is getting triggered while creating business partner.
Maximum points will be rewarded.
Thanks in advance
Nadh.R

Hi Nadh,
This is done in SMOEAC transaction where you assign the subscription and replication objects.
You go to SMOEAC and select the object type as Subscription and click on display icon and it displays the subscription ALL Business Partners and when you click on this or expand you find publication and when you expand this you find replication objects and against this you find the BUPA_MAIN bdoc type.
Hope this helps and if so please reward points.
Thanks
Srini

Business Partner creation for Customer Master creation

Hi
We have customized our system in order to trigger the creation of Business Partner whenever a Customer Master is created.
I created some customers for which the Business Partner creation was not triggered due to some reason.. In order to manage the same, i created a Business Partner manually and tried to link the same to my customer through T Code FLBPD2, but system returned with a message "The business partner could not be linked to the customer selected" Message Number CVIC_UI023.
Can anyone suggest something.
Thanx in advance
Pankaj

Hi Pankaj,
Please check wether you configured all required node under Master Data Synchronization..In SPRO..I am referring to below node.
Active Synchroniztion Options
Set BP role Category for customer Integration
Define BP Role for direction customer to BP
Field Assignment for customer Integration
Thanks
Veman.

About Business Partner Marketing, Sales Area Data tables

Hi,
I want the table names where Business Partner sales area data and Marketing Attributes are stored.
Thanks in advance.
Regards,
Dhanraj.

Hi Natarajan,
Thanks for your help.
But There is no data inside this CRM_MKTPL_ATTR table.
I want the Sales Organisation,Distribution Channel, Division data and Marketing Attributes of Every Business Partner.
I found table CRMM_BUT_FRG0080 contains data, but when I created a new Business Partner and maintain the Sales Area Data, the saved data does not reflect in the CRMM_BUT_FRG0080 table.
Regards,
Dhanraj.

Business Partner Creation in custom program

Hi All,
I am trying to crate Business Partner in my custom program using the BAPI BAP_BUPA_Create. The newly created BP is getting created & updated in BUT000 table, but it not updating in KNA1 table. As per my furrther requirement the new BP should be available in KNA1 table.
Can anyone please help me out to resolve this issue.
<removed by moderator>
Edited by: Thomas Zloch on Dec 6, 2011 3:09 PM

Hi,
Try checking the inputs of BAPI for reference customer details. In order to get the data in KNA1 (link to R/3 system) reference customer has to be maintained.
Settings for reference customer can be done in SPRO.
Hope this may be helpful.
Regards,
Sharin

'Standard Role' 'User' 'Business Partner' and 'Internet User'

hii
Currently I m working on E-Recruitment 6.0 BSP's..
Can somebody explain me....
1)
'Role' 'User' 'Business Partner' and 'Internet User'
Kindly help me undertand the relation between the above mentioned IDs and there creation
2)
I have created Business Partner(External Person) ID using BP(txn)...Kindly let me know how to create the 'Internet ID' and 'PW'
So that I can use it for HRRCF_StART_EXT (BSP)
kindly explian...or mail me any documention related to
E-recruitment to my id [email protected]
Looking for a immediate reply
Regards,
Raghav

Role - is the same as the concept of role in R3. SAP Delivers some pre confogured authorisation profiles for some standard roles.
Roles are assigned to user depending on the client's requirement.
Business Partner is the same as BP in CRM. basically, the following will be BPs in ur system:
Each independent user of the recruitment process - as BP Branch.
All third party recruitment vendors as BP Type Agency.
All employees will also be BP in the system.
All external applicants.
You can create internet user using the t code SU05. You can also use the R3 sytem user credentials to log on to the url application by configuring the system to use the SAP login. (this is done thru t code SICF)
Hope this helps.

Connection between business partner and organisational unit

Hello,
I have a problem with the account integration in cProjects ( error message: Cost/revenue rate X is not valid in organization 00000000 ) and I think that there could be a problem with the treewalk from the business partner to the organisational unit.
I am using the transaction ppome to customize the organisational unit with the employess. Unfortunately I cannot see this connections when I am using T-Code PPSS to do the treewalk. Does someone know which evaluation path is the correct one for price evaluation?
Is it correct that the connection between the business partner and the organisational unit is:
employee <-> bp <-> org. unit? What is a good starting point to search for the gap between this chain?
When and what for is cProjects treewalking for the price? What calculation is cProj doing with it?
Thanks in advance,
Vanessa

The problem is solved due an incorrect business partner. So the question is obsolet, thx.

Query in CRM to get data from Business Partner and Opportunity

Need to develop a new query based on Business Partner and Opportunities in CRM. Not finding any link how to relate these two .

Hi Vishal,
BP is the Master Data, so load the master data first and then load the Transaction data for Opportunity Item and Header and then Create the quesry on the Opportunity Cube. Your problem is solved.
Assign points if useful.
Regards
Vishwanath

CRM Business Partner and Customer Mapping

Hi,
I wanted to know, how do we find out, that a BDOC of type BUPA_MAIN in SMW3_BDOC will be a customer or a Business Partner.
Is there some way to know this thing.
Regards,
Rishav

Hi Rishav,
Here is how you can find it out.
In transaction smw01, you get get the BP number. In trancaction BP in CRM. you can check the role of the BP. Then you can check the clasification that is mapped to this role of BP. Then in ERP go to transaction PIDE and check the mapping from from CRM->ERP. There you can find the Account group mapped to this classicication.You can find all the customer account groups in ERP using transaction OVT0.
All these account groups would be mapped to customers in ERP.
Hope this clarifies your query.
Best Regards,
Shourav

Table containing link between SAP REFX Business Partner and Customer

Hi,
I am stuck up at a requirement wherein i need the name of the table in which i can pass REFX Business Partner number and get the corresponding Customer Code in the output.
Can anyone help me in this regard.
Thanks in advance
Pankaj Wadhwa

Hi Pankaj,
release 470: table BD001 contains link between partner and customer
SAP ERP: table CVI_CUST_LINK contains link between internal partner guid(!) and customer
Partner guid is field in table BUT000.
Hope that helps.
Regards, Franz

Error "CRM business partner could not be mapped to an ERP customer

Hello experts
Kindly help
I am creating quotation in crm web UI and when i save it it gives warning message "CRM business partner 65451 could not be mapped to an ERP customer"
when i checked in ECC system for same quotation it is avaialble there .
Then why this warning message is coming
rply

Hello
You have to define mapping between CRM and ERP customer. The information which customer is associated with which BP is stored in CRM in table CRMM_BUT_CUSTNO and but0id. Use transaction PIDE on the ERP side to form mapping. Then work with load of customers.
Such error appears when data about BP is entered in document directl but system couldn't find mapping in tables above. Hope it helps.
Regards, EL

Business partner and R3 customer mapping table

Similar Messages

Maybe you are looking for