Business Partner Cockpit not viewable

Hi,
I am getting error in transaction CRMD_ORDER when we proceed in the
following steps:
1) Login to CRM server
2) Go to transaction CRMD_ORDER
3) Find -- > Select --> Lead
4) Click on START --> Click on only 100 docs
5) Select Number 7
6) Click on Business Partner Cockpit
Error pops up with 'page cannot viewed', as you do not have any
authorization to view. The error remains the same even if the user
has SAP_ALL.
Any one has worked on Business Partner Cockpit ?
Cheers,
Chetan

Hi Mukesh Kumar
Business Cockpit helps you view and manage information in Business transaction processing BP maintainace.
It basically contains information BPs , links to the transactions and fact sheet( about the business partners that can be customized according to the relevance to particular user).
Transaction code for reaching Business Partner Cockpit: CRMD_ORDER_BP
For Complete details on Business Partner Cockpit:
http://help.sap.com/saphelp_crm40/helpdata/en/6a/dae6399ad67420e10000000a114084/content.htm
Fact sheets:
http://help.sap.com/saphelp_crm50/helpdata/en/8d/b65a42a0836255e10000000a155106/content.htm
Hope this helps you,
regards,
Anirudh

Similar Messages

  • Factsheet for both Business Partner Cockpit & Portal

    Hi,
    There are some factsheets inside business partner cockpit. Can these factsheets be viewable in portal as, for instance, an iView?
    One of the BP partner cockpit factsheets is CL_CRM_CCKPT_IOS_XML_RFC_STYLE which renders HTML from XML data generated by ABAP with an XSLT.
    Using portal's URL iView is not a suitable solution due to additional authentication issue (when user navigates from portal server to BP's web server) and hassle during portal content transport, from DEV -> QA -> Production.
    Any suggestion?
    Regards,
    Tony

    the system run on the same server and it is the same client. The difference between the two applications are:
    - different mandant, different business partner (BP FS and BP)
    And with the BP partner it works perfect.
    thanks,
    greetz sebastian

  • Business Partner Cockpit error in CRM

    Hi,
    I am getting error in transaction CRMD_ORDER when we proceed in the
    following steps:
    1) Login to CRM server
    2) Go to transaction CRMD_ORDER
    3) Find -- > Select --> Lead
    4) Click on START --> Click on only 100 docs
    5) Select Number 7
    6) Click on Business Partner Cockpit
    Error pops up with 'page cannot viewed', as you do not have any authorization to view. The error remains the same even if the user has SAP_ALL.
    Any one has worked on Business Partner Cockpit ?
    Thanks and regards,
    Kunal Patel.

    Hi Kunal,
    Are you working on the fact sheet .
    I am working on the fact sheet and I have some questions.
    I solved the issue you are having by enterin my user name and password of the SAP system.
    I have some other porblems with the business partne rcockpit and I thought your experienc emight be helpfull
    Do let me know
    RGDS

  • Synchronization from vendor to business partner is not active?

    Hi there
    I am busy performing data migration of business partners and vendor accounts and have hit an issue on the last step of linking the uploaded BP to the uploaded Vendor.
    On execution of the transaction FLBPC2 (Link Vendor to Business Partner), it issues the error "CVIV_UI015 Synchronization from vendor to business partner is not active" which I believe is a product error because:
    1. I have configured BP to a new internal number range (and all other config requirements)
    2. I have configured a new Vendor account group with an external number range which is a duplicate of 1. above
    3. I have enabled BP to Vendor synchronisation in "Master Data Synchronisation" (from BP to VENDOR).
    I have tested my configuration successfully by creating a business partner via transaction BP and extending him to a vendor in a company code perfectly (works like a charm).
    My data migration process includes:
    - Creating a business partner using BAPI BUSISB990/FSCREATEFROMDATA.
    - Creating a vendor using the external number given above using a recording of FK01.
    - Linking the two using a recording of transaction FLBPC2 (Link Vendor to Business Partner).
    I am not trying to synchonise a business partner from vendor, but to synchronise the vendor via the business partner (which works using transaction BP) when the issue is received.
    Any ideas as to why I cannot do the operation manually which works via automation and why the error is not appriate?
    Regards
    Joe

    Good morning,
    I had a similar problem and solved by disabling
    the integration of the PI / XI of the PPO.
    To make sure that the PPO is working properly.
    You can check this setting by BUPA_CALL_FU transaction.
    Checks if the items are BUPA_OUTBOUND_MAIN and BUPA_OUTBOUND_REL
    integration of the disabled for PI / XI, according to the objects you need to be replicated.
    If they are uncheck them and rerun your tests.
    Use MDS_PPO2 the transaction log to check the copy of BP
    to the Vendor.
    I hope it helps, Good luck,

  • BDoc Error-Business partner is not a person

    HI
    We have a error in the  BUPA_MAIN Bdoc for only one customer that "Business partner is not a person". What could be reason for this? How this can be rectified?
    Thanks
    Prince

    Hello Varun,
    If you want to have as contact Person for relationship XXXX as well organization , that could be an issue. Because in standard it is only forseen that  Persons can be assigned as Contact Persons. There for you have to create a Z-Relationship type.
    A Group can have a Contact PERSON, but no Contact ORGANIZATION. As stated in standard it is not possible to have an Organization as Contact Person.
    thanks

  • BAPI_BUPA_CENTRAL_CHANGE: Business partner does not exist

    Hello,
    I'm trying to change a business partner, which I created with BAPI_BUPA_CREATE_FROM_DATA.
    But I get the error message "Business partner does not exist"
    I do following:
    1. create the BP with the BAPI_BUPA_CREATE_FROM_DATA
         get the BUSINESSPATNER- number
    2. fire BAPI_TRANSACTION_COMMIT.
    In the SAP-GUI transaction BUP3 I can see my BP, ok
    3. I try to change this BP with BAPI_BUPA_CENTRAL_CHANGE
         and I get an error "Business partner does not exist"
    Why?
    I'm using JCO, I used to set BUSINESSPARTNER with and without leading zero - it doesn't work.
    Can some one give me an advice?
    Thanks,
    Sergej Berg

    Hi,
    The "VALID_DATE" should be set to the date of execution (at least this is what I'm doing in my system).
    If you execute it via SE37 you can give it in the format of DDMMYYYY, but if you are testing an IDOC via WE19 you have to give it in the format of YYYYMMDD.
    Enjoy,
    Ayal.

  • What is the use of the business partner cockpit ?

    Hello All
    What is the use of the business partner cockpit ?
    Regards
    Jacopo Francois

    Hi,
    BP cockpit is also called as BP factsheet. It gives the 360 degree view of the BP transations. Its a BSP application on GUI. To enable the factsheet you will have to activate the relevent BSP services in sicf.
    For more informatio refer
    http://help.sap.com/saphelp_crm50/helpdata/en/8d/b65a42a0836255e10000000a155106/content.htm
    Reward points if helpful.
    Shridhar

  • Segment Builder: 'Business partner does not exist in target group'

    After having built a target group in the segment builder the following error message occurs: 'Business partner does not exist in target group'. What is meant by this error message and what has caused this error?

    Hi Mahesh,
    Are data sources based in infoset¿? If the are based in infoset u can do simple queries.
    I create infoset in t-code 'SQ02', once the infoset has been created u can go to 'Enviroment' --> Queries, and here u can created simple queries based in the infoset. With this tool u can check if this infoset has been created sucessfully.
    Hope it helps u.
    Regards,
    Mon

  • Business Partner can not was created in a hire

    Hi, Good night.
    I have the following issue. I am check an employees that was hired with earlier date to the current date and not generated Bussiness partner. I understant that the system not create the business partner when the employees are hire to future date.
    However i did the hire in the client of test and the system if create the BP. The question is:
    What are the reasons for which a Business Partner can not be created in a hire, in the role of employee?
    Regards
    sanew2

    Hello,
    Please check if infotype 6 (addresses) is maintained for the employee. If not maintain a record for address and try.
    Also, what are the infotypes that you create for an employee during hire?
    Br,
    Remya.

  • Business partner cockpit?

    Hi Guru’s
    What is Business partner cockpit how it will work?
    I will give points 
    Regards
    Mahi
    [email protected]

    Hi Mukesh Kumar
    Business Cockpit helps you view and manage information in Business transaction processing BP maintainace.
    It basically contains information BPs , links to the transactions and fact sheet( about the business partners that can be customized according to the relevance to particular user).
    Transaction code for reaching Business Partner Cockpit: CRMD_ORDER_BP
    For Complete details on Business Partner Cockpit:
    http://help.sap.com/saphelp_crm40/helpdata/en/6a/dae6399ad67420e10000000a114084/content.htm
    Fact sheets:
    http://help.sap.com/saphelp_crm50/helpdata/en/8d/b65a42a0836255e10000000a155106/content.htm
    Hope this helps you,
    regards,
    Anirudh

  • Error R1201 "Business partner ### does not exist" with new contact person

    Hi,
    We have configured CVI masterdata synchronization for Customer<->BP and this is working well for customer masters without contact persons.
    However, when we try to add a contact person to an existing customer (or synchronize an existing Customer with contact persons) we get the error message R1201 "Business partner ### does not exist".
    I have checked the wiki.
    We are able to manually create a Person with role BUP001 (Contact Person) and link it to the BP with relationship cat TBUR001 (Is Contact Person For). Here the synchronization BP->Customer seems to be working, as the new contact person is successfully created in the Customer.
    Any ideas why we cannot synchronize Contact Persons, Customer->BP?
    Thanks in advance,
    JJ23

    Hi James,
    may i know if you had find a solution for this.
    I have same issue.
    Thanks in advance
    Vijay

  • Error R1201 Business Partner does not exist (Treasury)

    Please could you help.
    I have created a Treasury Business Partner using transaction BPC1. When I display using BPC3, the partner exists.
    I then create the Transaction Authorisations using TBI6.
    However when I try to create a transaction e.g. through TX01, the error message says "R1201 Business Partner does not exist"
    Any ideas or advice would be much much much appreciated, and points awarded accordingly.
    Thanks in advance

    The transaction code to Maintain Business partner is BP. I am not sure in which version you are.
    When you create a BP it creates inthe role of Business Partner - Gen - 000000.
    In order to create a transaction using a BP, they should exist in the role of Counterparty - TR0151.  But since you say that you have maintained TBI6, then I thinkyou should have the BP in the role of counterparty. SO I am not sure what is wrong. If you can send screen shots, I can help.
    Send it to my email id [email protected]

  • Err while confrm  Business partner  does not exist (Notification E R1 201)

    I am for the first time into CRM serv implementation.I have 2 issues. Please provide your valuable suggestions at the earliest.
    I raised a serv order, released items, confirmed it and changed the status to complete. now when i try to raise an invoice, in billing due list, serv order num is showin up but not confirmation number. Billing relevance in item category for
    service item in Serv order ---> Order related billing acc to order quantity
    confirmation item category--> Transaction related billing after completion.
    The reason i expect is that i have used a crm employee as employee responsible as HR is not yet in place. At the time of confirmation and data transfer to r/3 system is throwing a message that BP doesnot exist. Long text is as follows
    "Business partner  does not exist (Notification E R1 201)"
    I am unable to trace out which BP is it unable to find. The Sold to i am using is on the other hand available in R/3.
    1) Is service confirmation incomplete and hence is not appearing in Billing due list or is there any other reason?
    2) How can i analyse which BP number is not avilable. i.e.. how can i check the contents of bdoc system is sending and because of which value of BP is the transfer getting stopped
    Regards,
    Kiran

    Hi
    The link is not working.
    The contents of the message is as follows
    follow all the following steps
    Setting up Transfer of Employee (HR Master) from R/3 to CRM
    1. Logical system XXX assigned to R/3 client XXX. Logical system YYY assigned to CRM client YYY – view through SCC4
    2. Create RFC Destination YYY for CRM client YYY in R/3 and
    Server ID with user details and client YYY.
    3. Transaction code SALE : Application Link Enabling (ALE) &#61664; Modelling and Implementing Business Processes &#61664; Maintain Distribution Model and Distribute Views. (Direct transaction code : BD64)
    Go to change mode and select ‘Create Model view’.
    You get a popup. Fill in the details – Technical name, short text and validity
    Select ‘Add message type’ from the application tool bar.
    Fill in the following details
    Model view : HRCRM
    Sender logical system : XXX
    Receiver logical system : YYY
    Message type : HRMD_ABA
    Note : Only this message type works for employee transfer.
    4.Save the model. From the same screen select the distribution model and from the menu Environment &#61664; Generate partner profiles
    Don’t change anything in the next screen. Simply Execute.
    4.Distribute the distribution model HRCRM
    Select the distribution model. From the menu bar, Edit &#61664; Model View &#61664; Distribute
    You get a dialog showing the receiver logical system. Execute.
    You get a log ‘Model view HRCRM has been created in target system YYY
    5.Go to the CRM system and check up whether this model has been created.
    Transaction code BD64
    The model has got copied. No changes can be made in CRM
    6. Generate partner profiles for the distribution model in CRM by selecting
    Environment &#61664; Generate partner profiles.
    In the next screen, do not make any changes and Execute.
    Partner profiles can be seen in transaction WE20
    Delta Download Settings
    7. So far, the above settings will ensure the initial download. However for any changes / new employees to be transferred, i.e delta changes, changes pointers need to be activated.
    In R/3, Transaction code SALE, Application Link Enabling (ALE) &#61664; Modelling and Implementing Business Processes &#61664; Master Data Distribution &#61664; Replication of Modified Data &#61664; Activate Change Pointers – Generally (BD61)
    This activates change pointers globally for all message types.
    8. In R/3, Transaction code SALE, Application Link Enabling (ALE) &#61664; Modelling and Implementing Business Processes &#61664; Master Data Distribution &#61664; Replication of Modified Data &#61664; Activate Change Pointers for Message Types
    Activate change pointer for message type HRMD_ABA
    9. CRM : Number Assignments. Generally, there are 3 types of number assignments (also called switches) when business partners are created.
    1 – The system uses the number from the general internal interval of the number
    range object BU_PARTNER
    2 – The system uses the number from a specific internal interval of the object
    3 – The number is transferred from HR and a prefix is added. In this case, a specific external interval, which must be defined as XX00000000 (upto
    XX99999999), is used (where XX denotes any two letters).
    The number range object for all switch positions is BU_PARTNER, with the interval depending on the switch value.
    For switch value 1, the system uses the internal standard interval, otherwise for switch values 2 and 3 you must also create a grouping (transaction BUC2) for these intervals. For the system to be able to connect the grouping and the number range interval, the name of the grouping must be exactly the same as the name of the corresponding number range interval (the name of the grouping is contained in the first column of the table). If you select 3 (HRALX/PNUMB = 3) for the number assignment of busienss partners of the employee role, create HRALX/PSUBG switch manually in table T77S0.
    In table T77S0, HRALX/ONUMB is used to set the number assignment for organizational units and HRALX/PNUMB is used to set the number assignment for employees.
    Create a number range ZZ
    Transaction code BUC2. Create a grouping of the same ID as that of the number range. Eg. Number range ID : ZZ and grouping ID should also be ZZ
    In table T77S0, maintain the following combinations
    HRALX-PNUMB = 2
    HRALX-PSUBG = ZZ
    10. Make the following customizing changes in CRM
    Transaction code SM30 : Table T77S0
    Group Sem Abbr Value Abbr
    HRALX HRAC X Activate HR Integration with CRM
    HRALX OBPON ON Activate integration between Business partners and Org Units
    HRALX PBPON ON Integration between business partners and employees
    HRALX OPROL BUP004 Role definition for org unit – Business partner
    HRALX PPROL BUP003 Role definition for Employee – Business partner
    HRALX ONUMB 1 Number range assignment for org units
    HRALX PNUMB 2 Number range assignment for Employees
    HRALX PSUBG ZZ Number range grouping only if PNUMB is not 1.
    11. Create Employee Master in R/3. Employee master consists of Infotypes. The mandatory infotypes are Actions, Address, Personal data and Organizational Assignment. You can ignore the remaining. Click on next and dont save the other infotypes.
    Transaction code : PA30
    12. In R/3 Initial Download : SE38 – RHALEINI
    Plan version : 01
    Object type : P – Person (always)
    Object ID : Employee ID eg. 1
    Receiver Partner no. : YYY
    Select further details
    You get all the data transfer details
    13. In CRM, transaction code PP01 – View HR Master objects
    You see that the employee 1 has got transferred. To see the corresponding business partner go to the infotype Relationships (the first row)
    Screen 2 gives you the business partner ID in CRM
    Regards
    Rekha Dadwal

  • "Business Partner Does Not Exist" SUS admin user registration

    We are currently using SUS.
    After business partner is transfered from EBP to SUS via XI, an email is generated to the vendor with a registration ID that allows him/her to use SRMSUS_SELFREG to register an admin user for that company.
    When the user registers based on the auto-generated registration ID, the screen outputs "Business Partner Does Not Exist".
    I am very stuck at this stage and can't find more places for an error log or any leads.
    Please help.

    Hi Derek Xu
    I saw your message about the problem and hope you have solved the problem, I would like to ask you a help to solve a problem that I have.
    I am configuring the SUS-EBP on version 5.5 they are in the same client, and my process must rum as follow:
    Acepted vendors can be transfered from EBP to SUS in this moment the vendor must receive an e-mail with user and password to acces the SUS and create a user .
    The problem is e-mails are not generated and I think the URLs in img Make Settings for Business Partners:
    URL for UM  I have doubt about what is the correct URL
    URL for Notification   I have doubt about what is the correct URL
    Could you send me an example of these URLs
    Thanks
    Nilson Fonseca
    [email protected]

  • Business Partner - person not available in WFM core

    Having created a business partner in BP transaction (role 'Resource), when I try staffing it to a role at the fron end, I get the message "Person XYZ is not known in WFM core."
    What all need to be done to be able to staff?
    Thanks all.

    Hi,
    In order to use Business partnesr as resources in cPorjects, create BP with role "Employee"
    You can use Transaction BP for the same.
    Regards,
    Reema.
    PS. Pl award points to useful answers.
    Message was edited by:
            Reema Shahbazkar

Maybe you are looking for