Business Partner Creation Issue-For object BU_PARTNER

Hi CRM Experts,
Need a help immediately.
Currently am working on CRM 5.2.
In SAP UI when I am creating a BP Type Organisation or Person system allows me to create But when i do the same in WEB UI i am having problem.
In Web UI when i am selecting New Account and creating New Corporate Account or Individual Account with Grouping and Role i am getting an error message as " For object BU_PARTNER , number range interval AB does not exist"
Message no. NR 751
Diagnosis
For object BUPARTNER , number range interval AB does not exist
Message no. NR 751
Diagnosis
The database table NRIV has the delivery class 'C', i.e. the SAP default
settings are only in client 000.
Procedure
Create the missing number range interval in customizing.
settings are only in client 000.
Procedure
Create the missing number range interval in customizing.
I have already assigned number range interval because of which i could create and save BP in SAP UI where as am facing this problem in creating BP only in Web UI.
Do i need to do anything in SNRO? Please explain clearly what should be done to resolve this issue?
Let me remind you again that i could create and save BP in SAP UI without any issue.
Do i need to make setting for the message"settings are only in client 000"
Regds...Arup

Hi Pankaj,
Please check wether you configured all required node under Master Data Synchronization..In SPRO..I am referring to below node.
Active Synchroniztion Options
Set BP role Category for customer Integration
Define BP Role for direction customer to BP
Field Assignment for customer Integration
Thanks
Veman.

Similar Messages

FSCM-COL Business Partner Creation for Existing Customers

Experts-
After using MDS_LOAD_COCKPIT to create the initial load of Business Partners, there are a few Customers which are still missing Business Partners. Automatic Creation of Business Partners is set up and fully functioning for any new Customers created, however when attempting to use MDS_LOAD_COCKPIT for the existing Customers which are missing Business Partners the error message 'No transfer of interval for object BU_PARTNER' (Message no. NR028) is received.
If the Automatic Creation of Business Partners is working correctly at the time of Customer Master creation, what would prevent the Business Partner from being created after the Customer already exists?
Please let me know if further clarification is needed on what is outlined above.
Thanks and Regards,
Corey

In case someone runs into a similar issue in the future, the resolution to this issue is provided below:
In the case I've highlighted the customer had been created, yet the Business Partner failed to be created in the Automatic Business Partner Creation functionality initially due to a missed Tax Number Category configuration. Once this configuration was complete the BP still failed to create via XD02 or MDS_LOAD_COCKPIT. MDS_PPO2 gave the initial error message as 'Business partner ##1 does not exist' (Message no. R1201).
Although the Customer to BP synchronization setting were set up for an external number range, the presence of contact persons in the Customer Master record were causing SAP to look for grouping data. Since no grouping data was present SAP was attempting to create BPs contact persons using the internal number range, which was already set at its limit.
By removing the contact persons from the customer master via XD02 and then re-executing the MDS_LOAD_COCKPIT, the requested Business Partner was created. After that the contact persons were then re-maintained in the customer master.

Business Partner creation for Customer Master creation

Hi
We have customized our system in order to trigger the creation of Business Partner whenever a Customer Master is created.
I created some customers for which the Business Partner creation was not triggered due to some reason.. In order to manage the same, i created a Business Partner manually and tried to link the same to my customer through T Code FLBPD2, but system returned with a message "The business partner could not be linked to the customer selected" Message Number CVIC_UI023.
Can anyone suggest something.
Thanx in advance
Pankaj

Hi Pankaj,
Please check wether you configured all required node under Master Data Synchronization..In SPRO..I am referring to below node.
Active Synchroniztion Options
Set BP role Category for customer Integration
Define BP Role for direction customer to BP
Field Assignment for customer Integration
Thanks
Veman.

BP Creation Problem in Web UI for object BU_PARTNER-Answers would rewarded

Hi CRM Experts,
Need a help immediately.
Currently am working on CRM 5.2.
In SAP UI when I am creating a BP Type Organisation or Person system allows me to create But when i do the same in WEB UI i am having problem.
In Web UI when i am selecting New Account and creating New Corporate Account or Individual Account with Grouping and Role i am getting an error message as " For object BU_PARTNER , number range interval AB does not exist"
Message no. NR 751
Diagnosis
For object BUPARTNER , number range interval AB does not exist
Message no. NR 751
Diagnosis
The database table NRIV has the delivery class 'C', i.e. the SAP default
settings are only in client 000.
Procedure
Create the missing number range interval in customizing.
settings are only in client 000.
Procedure
Create the missing number range interval in customizing.
I have already assigned number range interval because of which i could create and save BP in SAP UI where as am facing this problem in creating BP only in Web UI.
Do i need to do anything in SNRO? Please explain clearly what should be done to resolve this issue?
Let me remind you again that i could create and save BP in SAP UI without any issue.
Do i need to make setting for the message"settings are only in client 000"
Regds...Arup

this problem you will face if you don't select grouping in CRM webclient 5.2 while creating BP.
In my case the field was missing in Webclient due to which system was unable to get the number range for the transaction which was hidden. you need to make it visible with the help of T-code-nbsp_wd_cmpwb.
Please let me know for any clarification.
you take abaper's help for this as well.
Regds...

Business Partner Creation ( Master Tenant with Customer Account)

Hello Experts
Am trying to create a master tenant with a customer account, but as i save the business partner there is no corresponding creation of the master tenant with a customer account in the company code. The system only generates a business partner created. I have cheked the settings on business partner customer and have the correct FI custmer acount to the business partner, have also checked settings on the assignment of the reconciliation account to the BP and again it is compatible with the customer reconciliation account in Financials. I have also the synchronization data to see whether the synchronization object is activated, and it was not activated and i activated it, but still am not able to create a master tenant with customer account.
Please Experts help me on this am very very stranded
Regards
David Mavi

Hi David,
Following activities are to be done to create customer simultaneously while the creation of business partner.
Business Partner Number Range: IMG>Flexible Real Estate Management (RE-FX)>Business Partner>Relevant Settings for Business Partner in RE Context>Number Range>Business Partner Number Range
Define Grouping and number range: IMG>Flexible Real Estate Management (RE-FX)>Business Partner>Relevant Settings for Business Partner in RE Context>Number Range>Define Groupings and Assign Number Ranges
Also make sure that the customer account group is created with a number range which should be external. The number range for the business partner should be internal.
Master Data syncronization: IMG>Cross Application Components>Master Data Synchronization>Customer/Vendor Integration>Business Partner Settings>Settings for Customer Integration>Field Assignment for Customer Integration>Assign Keys>Define Number Assignment for Direction of BP to Customer
In the settings select the same number range only if the number ranges for the customer account group and BP groups are the same.
If u have done all these things and still the customer is not getting created then there might be a problem of the mandatory fields. i.e may be in customer account group some fields are mandatory which are not getting copied from the BP. So make all the fields in the customer account group as optional. and try to create new BP again.
Regards,
Deepak M

Error -: AIP-16012: Parameter: trading Partner is unique for object Trading

Hi Gurus,
When I go to rename the b2b server under trading partners, I receive the following error:
An error occurred when updating the trading partner.
1. Error -: AIP-16012: Parameter: trading Partner is unique for object Trading Partner Identification
2. TradingPartner.TradingPartner - Error -: AIP-11052: Writing following objects: Trading Partner Identification failed due to following constraint violation: TRADINGPARTNERIDENTIFICATION_UK. UNIQUE CONSTRAINT VIOLATION
3. PartyIdentificationType.TradingPartnerIdentificationType - Error -: AIP-11052: Writing following objects: Trading Partner Identification failed due to following constraint violation: TRADINGPARTNERIDENTIFICATION_UK. UNIQUE CONSTRAINT VIOLATION
4. Value - Error -: AIP-11052: Writing following objects: Trading Partner Identification failed due to following constraint violation: TRADINGPARTNERIDENTIFICATION_UK. UNIQUE CONSTRAINT VIOL
This occurs after I purge the b2b and even manually delete the trading partner that has the name that I require to change the server to (required for quality assurance testing). When I check the identifiers, there are two name ones (one of them is the one I am trying to change to) but I cannot delete any of them as it is grayed out.
Any thoughts?
Thanks
Gerald
Edited by: Gerald M. on Nov 30, 2009 8:50 AM -addtional info

Solved the issue, I manually delete entries in b2b.tip_tradingpartneriden_aud and b2b.tip_tradingpartneridentifica_t.
Is this safe to be doing this?
Thanks
Gerald

Need Enhancement spot in Business Partner Creation/Change

Hi all ,
In Business partner creation/Change screen(Tcode BP),if pressing BACK or CANCEL button without saving data, it will ask for confirmation that Want to save data or not.If we press YES it will save the data,or if we press NO it won't. Is there any Enhancement spot (User exit or BADi) available after triggering the above confirmation message.If so kindly intimate me the Exit name or BADi name.
Thanks in Advance..

Try using Implicit Enhancements .
I have got implicit enhancements over here for you.
check out if Useful while dubugging.
include :LBUS_LOCATORF05
screen 3000
prog SAPLBUS_LOCATOR
form dynpro_pai_begin
dynpro_pai_end
create IMPLICIT enhancements here.
To avoid confusion write your code after IF condition checking for
GV_OK_CODE which is BUS_MAIN_BACK and dynpro number.
If you dont know Implicit enhancements try this link
http://www.sapdev.co.uk/enhance/eframework/eframeworkhome.htm
checking ok_code is necessay otherwise it will be executed everytime PAIis triggered.

Display Org Unit based on User logon in Business partner creation..

Hi Gurus,.
I have to assign Sales Org , DIV, Distribution Channel to the Business Partner in Sales Area data. When I try system shows entire Org structure. But I want the Org structure should be displayed based on the user log on. Assume that, I am assigned to Shangai and creating Business partner for Shangai, the system should not show Beijing or other Org Unit since I belong to Shangai. How to address this scenario thro standard customization?
Is it common problem in CRM Webui(6.0 and 7.0).
My Org Structure:
Global
China
     Shangai
     Beijing
   Nanjing.
Thanks in Advance....

Hi Varma,
From my understanding of your problem, you can approach it in a different manner. Since, you mentioned that you will be receiving a delimited flat file around 5 to 6 times a day, you can probably consider coming up with a Report Program. This Report will consume the flat file, generate the necessary organizations, business partners, BP relationships and then create them and finish with the logging of all the messages ( Success, Error, Warnings, etc.)
You can now schedule this report execution in a Batch Processing Job which will be executed as per the scheduled time and at the end of the day you can see all the application log files.
This is just an approach and you can modify the report in your own way. I guess that the flat file will be located somewhere in the same place daily so that you can hard code the File Name and Path in the report.
Regarding the Organization and Business Partner creation, you can use the standard SAP delivered BAPI's which will return you all the errors properly.
Hope this helps.
Thanks,
Samantak.

Very urgent: Doubts regarding CRM WORKFLOW OF BUSINESS PARTNER CREATION

HI ,
I HAVE DOUBTS REGARDING CRM WORKFLOW OF BUSINESS PARTNER CREATION, WHILE I AM CREATING BUSINESS PARTNER THROUGH R/3 , IT REFLECT IT INTO MYSAP CRM ALSO, AT THAT TIME IT SENDING THE MAIL TWICE TO THE RECEIPIENT. IS THERE ANY WAY THROUGH WHICH I CAN RESTRICT IT TO SEND THE MAIL ONLY ONCE,
PLZ SEND ME THE REPLY AS SOON AS POSSIBLE,
THANKS ADVANCED,

HI
WORKFLOW SEETING. SAP MAIL
MULTIPLE MAILS AND
ONLY ONCE CHOOSE
ONLY ONCE OPTION ON WHICH VERSION U R WORKING?
REWARD IF HELPFUL
VENKAT

Business Partner creation - Sales Area Data retrieves blank divisions

During business partner creation, the sales area data assignment block will retrieve a list of all relevant sales organizations, distribution channels, and divisions that are replicated from ECC. This is working fine. However, it also adds to this list with the sales organizations, distribution channels, and blank divisions. Blank divisions do not exist in either ECC or CRM. It appears to be using the dummy division settings, but I have attempted to configure with the indicator "CRM Header Div. Active" as both active and inactive, to no effect. The only time I have been able to condense this list into a single line has been when I actually activated dummy divisions -- to which CRM would now retrieve only sales organizations, distribution channels, and blank divisions. This is not an ideal solution either.
How do I get the system to remove the blank divisions from being displayed? It is very confusing to the users, not to mention polluting the screen.
Example (both are being displayed, I only want the one with an actual value to be displayed):
Sales Org = 1000, Dist Chan = 10, Division = blank
Sales Org = 1000, Dist Chan = 10, Division = 10

any insight woudl be much appreciated. thanks.

My business partner signed up for the acrobat xl pro, and added me to the account. it send me an email to download and install, but after it downloads, nothing happens, can't double click on it to open, it just does nothing on the double click. I tried

my business partner signed up for the acrobat xl pro, and added me to the account. it send me an email to download and install, but after it downloads, nothing happens, can't double click on it to open, it just does nothing on the double click. I tried to download again, and still same thing. I am on a mac with latest OS. Does anyone know what I am doing wrong?

he is on a pc, we bought a subscription to the license and was told it's 180 a year or 14.99 monthly per user, on the business plan. So the sales rep on the phone walked us through adding the people who will be added to account who will need a license to use. the sales rep said that we just need to go to that section and add users and it will email the user a link to download the file and install

Business partner address issue

Hi Experts,
I am involved in a CRM upgrade project from 4.0 to 5.1.
There is a typical problem.
For some business partner types, all the BPs are having double address maintained in the database,i.e., the address of the business partners are maintaned twice, though only one address has been entered for them during BP address entry.
So whenever we are working with tcodes like opportunity, it is prompting us to select one of the address from the pop-up. Whenever we are entering any partner value in the Partner tab, a pop up comes to select one of the address though both the addresses are same.
What I saw in ADRC table is there are 2address no.s maintained for the same address.
No clue why it is happening and how to rectify it.
Please help, its an urgent issue.
Regards,
Sangeeta

Hi,
You can write an executable report to determine the duplicate addresses and then delete them selectively from ADRC table using the API
BAPI_BUPA_ADDRESS_REMOVE
or using delete statement and then calling
commit_work
If you are using mobile sales application and having the same problem, then i would advise you to use Middleware concepts of Bdoc creation to create bupa_main Bdocs with the delta mode set properly for address and then trigger the mobile bridge programmatically to create the relevant sBdocs and replicate to the clients.
Also, if you would this problem in R/3, then you would need to trigger the bupa_main adapter object upload using request loads.
Reward if helpful.
Thanks,
Sudipta.

No transfer of interval for object BU_PARTNER

Hi Experts,
We have faced the problem with Creation of Business Partner - role TR0600, while we save the Business Partner and we have received the ERROR: u201CNo transfer of interval for object BU_PARTNERu201D .
Could you please guide me?
Thanks and Regards,
Chandra.

Hi friends,
we have analyzed the issue. while creating the Business Partner Organization, user is missing the selection "Grouping" option.
so, issue is resolved.
Thanks,
Chandra.

Business partner creation error

Hi Gurus,
1) We don't have pre-configured standard settings for FICAx (for ex standard contract categories, document types, number ranges, main and sub-transactions) in our system. Can anyone tell me how to load the pre-configured settings in SAP.
2) In BP creation after entering all the BP fields, if I try to save the data it says the BP has been created but gives a dump. We were not able to find that BP when we try to look up. I am not sure if it is a configuration issue or is it due to improper loading of FI-CA.
3) We have the same issue with contract account creation CAA1, CAA2, or CAA3. When we try to access transaction it gives dump.
The current ABAP program "SAPLBUSS" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLFSP35 " in include
"LFSP35TOP " in
line 36:
"Missing length check at runtime"
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLBUSS" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Please advise and points will be awarded for all useful solutions.
Thanks
Santosh
Edited by: Santosh Kolleti on Dec 15, 2008 6:39 PM

Hi Mahesh,
Thanks for the info, i did check the validity in the Business Partner and it is coming correctly for the one which are created.
Issue i am facing is while creation of business partner, is the any field in customer master which govern the validity of Business Partner while creation.
Thanks & Regards,
Ravi

Business Partner Creation/Display - General Data fields are missing

Hi,
We have an issue in our ECC6.0 system. In FPP1/FPP2/FPP3 transactions General data fields such as Driver's license, SSN, Employee class are missing under Identification tab. But the same are displayed in BP transaction code. What configuration would causing this issue.

I found a SAP Note 844949 which is talking about the same kind of issue. As per the note I regenerated subscreen containers for application object BUPA.
Call transaction BUSP and generate the subscreen containers for the application objects BUPA, FICA and BUPR. To do this, set the "All screens" indicator under "Generate All Screens or Just Selected Screens".
If this does not correct the incorrect display, use transaction BUPT for the business partner or transaction CAWM for the contract account to make sure that the fields are not missing due to the field modifications. (If you cannot call these transactions, exit the SAP Easy Access menu by using /n and then call BUPT or CAWM.

Business Partner Creation Issue-For object BU_PARTNER

Similar Messages

Maybe you are looking for