Business Partner Custome Fields Mandatory

Hi,
I have added some custome felds to the manage business partner. I want some of the custome fields to be mandatory.
Can anybody tell how to do it?
Regards,
Raveendra

Hi
Please paste what code you have made here in your reply.
Meanwhile, go through the following links ->
Re: Vendor Master Extension in SRM
Re: F4 for customer table fields
Re: Add custom fields to Contract Transaction in SRM 4.0
Other realted Information ->
It is possible to add custom fields / structure to the Business partner screen.
It is required that you create a custom screen (sub-screen) and perform the assignments in the BDT. Go to area menu BUPT. You can see sub-menu Screen Layout. Check the customizing using transactions BUS2 to BUS5.
You can add custom fields, custom screens and assign custom PBO and PAI function modules. You can have a look at how the existing screens are made and accordingly copy / configure your custom screen and fields. Enhancement through BUPT will work. Just ensure that the field group which you add for that there is a flag 'TABLE CONTROL' in transaction BUS2 which has to be set.
Hope this will help.
Regards
- Atul

Similar Messages

Need to Make end customer field mandatory in sales order form.

I need to make end customer field mandatory when sales channel entered as some value...
for this i have used when validate record on order form
when i enter a value in sales channel as desired value the form is getting saved automatically and the field is getting mandatory
but my requirement is to make field mandatory and then to save the order.
let me know the sequence how it works if any one knows.

Sanni,
>
when i enter a value in sales channel as desired value the form is getting saved automatically and (then) the field is getting mandatory
but my requirement is to make field mandatory and then to save the order.
>
Which trigger are you using to do the "getting saved automatically'?
Does this trigger fire before the trigger that is making the field mandatory?
Regards,
PS: Is this an Oracle EBS query? If yes, this is the wrong forum
Edited by: Prabodh on Jun 14, 2012 4:48 PM

How to adde New Language field value in CRM Business Partner Language Field

Dear all,
How can we add a new field value to the Business Partner Language field in CRM and ECC systems.
Your suggestions will be highly appreciated
Thanks
Sravanthi

Hi Shravanthi,
You would need to add the new language to table T002. Once this is done, it will appear in the drop down menus.
Regards,
Rishu.

Custom field mandatory

Dear friends,
In IDES, i have created the project and when iam releasing ,PRs will be creating, While creating PR Iam getting the following message.
" Custom field mandatory"
And PRs are not creating.
Pl.suggest.
Regards,
Canand

Check Field selection for Network in IMG:
PS->Structure->Op Structure->Network->User Interface settigns->Define Field Selection for Network
Select Network Details.
Now Check if Material Group, Purchasing group field is hidden or not. If it is hidden make it input.
Bye
SSanjay

S_ALR_87012357 Business Partner Name field is blank

Dear All
While running this report i am getting values and tax related details correctly. In customer and vendor field i am getting their number. But i am not getting description of the same.i.e the field business partner is blank.
Kindly guide me to get data for that field.
Thanks
Shobana

Dear Shobana,
how to get customer and vendor fields in report S_ALR_87012357 .
While running this report i am not getting customer and vendor fields iself.
Kindly guide me to get data for that field.
Thanks
Shobana

Solman 7.1 - CRM WebClient UI - custom field mandatory on status change

Hi
I've got a question and I'm not sure if it's possible.
Basically i have created a custom field in CRM WebClient UI and I have added this field to my Z configuration. This works fine.
Now, I'm wanting to make an error to appear if this field is blank (hasn't been filled in) when the status of the transaction type changes to a specific status.
i.e. if "custom field" is BLANK when SMTM changes to Closed, then error appears
I know the field can be made mandatory, but this particular custom field won't be filled out straight away. Therefore I want the check to occur when the document is closed. Can this be done via PPF Conditions? Or is ABAP/enhancement the only way?
Thanks
Shaun

Hi,
For customizing crm web ui, you must need AET or EEWB tools. Best Practices for SAP CRM Web UI Customization - CRM - SCN Wiki
but try by using the standard sap note 1772650 - ST710:You can save a message even though mandatory fields are not filled in. which can set certain warning message for custom fields or not and the other relevant 1931783 - Incident can be saved without filling mandatory fields
Please check.
Thanks
Jansi

Business partner Customer is not created for Sales B Role in R/3

Hi,
I am trying to create Customer for a business partner associated with itin Tcdoe BP. I m giving the account management and Payment terms Tab details and clicking on SAVE button. The screen values are not retained and the Customer,Comapny code combination is also not created.
thanks,
Deepthi.

OSS Note 1254214 is applied and it is solved.

LSMW : Idoc method , Business Activities custom fields data upload

Hi guys
I am uploading Business activities using LSMW IDOC method and below message and idoc type
Message type CRMXIF_ORDER_SAVE_M
Basic idoc type : CRMXIF_ORDER_SAVE_M02
Using EEWB I added few fields to business activities , along with the standard fields I want to upload the customer fields also .
I tried to Extend the Basic idoc type CRMXIF_ORDER_SAVE_M02, but it was not allowing me to Extend ( since it is generated basic idoc type ) I tried the other Basic idoc types for Business activities , I got the same problem
the basic idoc type contains only two Segments
E101CRMXIF_CUSTOMER_H_X (parent)
E101CRMXIF_CUSTOMER_H (child)
with out my custom fields
pls help how can i add my custom fields ( added by eewb) to the basic idoc type
for uploading custom fields
thanks in advance
Warm regards
Rajasekhar

You are going to need to create an enhancement of the standard IDOC type in order to get your custom fields to show. I can't remember the exact procedure, but you will need to create a Z-type based on the existing type in the system. When you generate the z-type the fields will be filled in.
Look at the following thread and it will give the basic steps
How to delete Extention
Good luck,
Stephen

Restricting Business Partner, Customer, and Vendor access

Hi,
We have the synchronization set up for the business partner and customer for REFX. The requirement is to allow access to change the Business Partner record in tcode BP, when as a General Business Partner, but only allow view access to the Customer information. I have tried limiting the following objects to 03 but to no avail. Any help would be appreciated:
B_BUPA_FDG
B_BUPA_GRP
B_BUPA_RLT
F_KNA1_BED
F_KNA1_GRP
V_KNA1_BRG
I would rather have the users have access to the following so that the Business Partner can be updated:
B_BUPA_ATT
B_BUPR_BZT
B_BUPA_FDG
B_BUPA_GRP
B_BUPA_RLT
Is there a combination that I am missing?
TIA

Hello Rao
I am also looking for solution. could you give some details on this, How did you solve your problem.
Thanks,
Ram

Business Partner Customer Group

I need to know where the "Customer Group" data is held against the Business Partner of role "Sold-to" (Billing tab of Sales Area data). Can anyone suggest the table or a Function Module?
Thanks

Hi This was on CRM, I've now find the tables and here's a sample program FYI.
AT.
==========================
tables: BUT000,
        CRMM_BUT_LNK0031,
        CRMM_BUT_SET0030.
Data Declaratons
data: lv_cust_group like CRMM_BUT_SET0030-customer_group.
parameters: p_parnr like but000-partner default '490871'.
START-OF-SELECTION ***************************************************
start-of-selection.
select s~customer_group
into lv_cust_group
from (       CRMM_BUT_SET0030 as s
          join CRMM_BUT_LNK0031 as l
             on sSET_GUID = lSET_GUID )
    inner join BUT000 as b
            on bpartner_guid = lpartner_guid
    where l~sales_org = 'O 50001033' "sales org!!"
      and l~channel   = '10'
      and l~division = '10'
      and b~partner = p_parnr.
endselect.
END-OF-SELECTION ***************************************************
end-of-selection.
write: 'Result:-', lv_cust_group.
write: 'DBCNT:-', sy-dbcnt.

Business Partner customer vendor

hello!
how can i connect between custome and vendor by transection BP
someone know how to use the submodel of Business Partner.
thanks
shay

GO to the COntrol Data of the Customer Master Record.
Assign the Vendor there.
Now if you see the vendor master Record you will find the same Customer in the Control Data.
RUN any Sales Order for the Customers or any Purchase order with respect to Each other.
One is the CUstomer gived the order and the Vendor Provides the Material for that Customer.
If you GO to FBL5n / FBl1n
you can see the Vendor and Customer Line Items Together.
regards,
A S

Business partner & customer link

Hi experts
I have created business partner from customer through BP & FLBPD1. Now I have to remove the link between BP & customer. Since any loan created with BP, the accounting entries are generated in the linked customer. Already loan is entered in the said BP and repaid also. so kindly advice.
regards,

Hi,
If you want to delink only 1 BP, then the only option available is archiving.
Check this link http://help.sap.com/saphelp_erp60_sp/helpdata/en/d2/c65c3996a0824de10000000a11402f/frameset.htm
It clearly says that You can remove an existing link between a business partner and a customer/vendor only as part of the archiving process.
Regards,
Ravi.

Making a custom field mandatory in co11n txn ?

Hi Experts,
I have added a field in co11n transaction ( say a) i want to
make these field mandatory ( i.e i should not let the user to
save the order without the value in my field ?
can any tel me how to do this, which exit should i use ( i have
list of all exit for co11n txn ) ?
thanks,
siva.

If dont want to code in Exit again . Try Chain Endchain.
This can be written in the screen you had developed in PAI module.
CHAIN
FIELD:AFRU-ZZCHARG MODULE FORM_VALID.
CHAIN.
and write your conditional code in FORM_VALID on save button click.
MODULE FORM_VALID INPUT.
CASE sy-ucomm.
   WHEN 'BU'.
       IF AFRU-ZZCHARG IS INITIAL.
             SET CURSOR FIELD AFRU-ZZCHARG.
         MESSAGE e389(00) with 'Please enter the batch '.
       ENDIF.
   WHEN OTHERS.
ENDCASE.
Thanks Swapnil

Business Partner / Customer Ledger along with the Quantities delivered

Hello Experts,
I need BP / customer ledger report along with the quantities in the ledger.
Help Required....
Edited by: Shazad Nazir on Mar 13, 2009 12:05 PM

hi,
You can enter manually total number of quanitities with item description in ar invoice remarks &
apply formatted search using query in journal entry field Ref1,by this way you can see customer balance along
with total quantity.
Jeyakanthan

Business Partner Reference Field in FB60

Hi All
I am unable to see the Ref1, Ref2 & Ref3 fields in the details tab while entering vendor invoice in FB60. I have checked the FSG of the posting key and GL Account and the Vendor Account group.
Any one who has resolved a similar issue could please guide me
Thanks in Advance
KIM.

Hi KIM,
Refer to the link below:-
FB60 Grid
Regards,
SAPFICO

Business Partner Custome Fields Mandatory

Similar Messages

Maybe you are looking for