Business Partner Datasources and ARFCSSTATE table data increase

Hi Experts,
I´ve been facing a performance decrease in SAP ECC data loading throughout the days, since we´ve started productive system (about 10 days).
During data loading, we have noticed an considerable amount of time spent by WP on reading table ARFCSSTATE. We checked note 375566, but there´s nothing that could be done to revert the situation.
Our ARFCSSTATE table has now 3.5M records, whereas our Business Partner master data datasources represent 99% of this data volume as can be checked in transaction SMQS (qRFC).
We also have noticed that 2.8M records of this table has status = "RECORDED", but I don´t if this data should remain in this table (ARFCSSTATE).
Anyway, as we are not advised to delete all these records manually, I´m wandering what we could do to prevent this table to increase considerably.
Any help will be appreciated.
Thanks in advance.
Fábio

Hi,
If delta loads go through fine, the records should get deleted from the table you mentioned.
Please check the following notes:
516251 - Support guide: Problems with ARFCSTATE = RECORDED
500316 - Delta request: Deletion from delta queue no longer executed
380078 - FAQ: BW delta queue (RSA7): Questions and answers
Also it would be good to check if any of your logistics extractors are using the 'direct delta' method. this also considerably affects the load performance when there are more number of delta records. There would be many LUWs getting written to delta queue this way.
Edited by: Murali Krishna K on Jan 15, 2011 1:26 AM

Similar Messages

Business Partner Role and Business Partner Grouping

Hello Everybody!
Business Partner Role and Business Partner Grouping.
Which correlation ist between this attributes existing.
In which table are this infos stored, In order create I can use
e.g. BUPA_CREATE_FROM_DATA
but how is the way inversely. Suppose I want to abtain the information
about a existing business partner which group he has etc.
Regards
sas

Dear Sas,
Business Partner Grouping is used to determine the number ranges to be used by the business partner at the time of creation.
Business Partner Role determines the subset of all the data available to be shown and edited.
I will give you a very simple (but imaginary) example for understanding the role concept: the business partner in a role of employee might allow you to enter a department id. So this field should be available to you for input when you edit the business partner in the role of employee. But suppose the same business partner is also a person who is your customer. And your customer will require a default payment term. So this field should be available for input when you edit the business partner in the role of a customer. Also, some applications use these roles to determine if the business partner is suitable for particular transaction. In the above example, Payroll application will only allow those Business Partner to be used if they are maintained as an employee. Similarly the sales application can mandate that you can only sell a product to a business partner if he is maintain in a 'customer' role.
Please understand the example above is not real but given for the understanding of the concept of role.
You can use the function module 'BUPA_CENTRAL_GET_DETAIL' to find the business partner group. And you can use the function 'BUPA_ROLES_GET' to find the role assigned to a Business Partner.
Regards, Rakesh

Export and import table data with Java

I need a library for simple exporting and importing table data.
The data should be exported to a SQL file with insert statements.
I just want to tell the library the table name, the connection and where to store the file. The usage should be very simple.
Are there any small libraries for this? Finished calsses and methods which I can just call?

I need a library for simple exporting and importing
table data.
The data should be exported to a SQL file with insert
statements.Every database has utilities to export/import data from tables. Take a look at your database manual.

Customer business partner hq and subsidiary

Hello
I have a group of customers that where 1 is headquarters and the others are subsidiaries. I created them all as business partners. How to connect parent and subsidiary? Via hierarchy or via relationship (is child of/ is parent of) in business partner?

Hi ,
Business partner Hq and subsidary can linked by using relationship , where the relation ship category category exist for subsidary

Can Business Partner number and Vendor Number, Plant Numbe be same in SRM ?

Hi Experts,
We are configuring SRM7.0 with ECC6 ( Ehp4) having Classic Scenario .
I configured sandbox, and everything working fine.
I have one query. The Business Partner Number and the Vendor Code or Plant code are different. So while entewring the Location key in Shopping cart we need to enter BP code, by drilldown ( In drilldown we can see ECC Vendor Plant number).
Its no big problem,.
Can anyone suggest whether it is possible to have both Unique or exactly same , so no need to remeber both code or see in drilldown.
Thanks
NAP

Hi Narendra
Location - BP can be different only since plant assign always internal BP number only so BP number and plant number can not be same.
but Vendor you have two options .
External Number - if you were selected BP and Vendor number will be remain same.
Internal Number - if you were selected BP and Vendor number will be different.
visit BUCF tcode for Internal and External BP number configuration.
See our Mentor Ricardo detail explanations
http://wiki.sdn.sap.com/wiki/display/SRM/ECCPlantorLocationnumberisnotdisplayedinShoppingCart
All the associated parties which are used in the SRM environment (like location, recipient and supplier) are modelled as business partners.
Due to this fact the user interface displays the business partner numbers in a uniform manner, as the business partners are the technical representation of the involved parties.
In order to give the user a better idea which business partners are shown by the numbers, a little text is displayed next to the corresponding field (e.g. 11147 - Werk Hamburg).
When ERP plants are replicated to SRM system, plant numbers are converted into business partners and a new ID is assumed.
Muthuraman

Cmd to export and inport table data of a paticular schema

hi,
can anyone tell me the cmd to export and inport table data of a paticular schema

Exp userid=system/pass owner=SCOTT rows=Y triggers=Y
Imp userid=system/pass file=expdat.dmp fromuser=SCOTT touser=NEW commit=yes log=log.txt

How can we delete SID table data and Text table data

Hi,
How can we delete SID table data and Text table data of any
InfoObject.

Hi,
Go to transaction SE14, give the technical name if the table:
/BIC/T<InfoObject Name> for Text Table
/BIC/S<InfoObject Name> for SID Table
Select "Table" in the given 4 options below & hit Edit button.
in the next screen select "Direct"
& also select "detele data" radio button.
& hit "Activate & adjust database".
this will delete the complete data from the tables.
Note: before deleting the SID's make sure of the consequences & after effects.
Also the SID gets generated the next time you load master data/transaction data only for those records which were loaded..
Regards,
Iliyas

Business Partner Report and table???

Can anyone tell me if there is a standard report/program that shows all the business partners in a report format? I am trying to get a list of all the business partners created in collections management so that I can compare it with the customer master records and figure out what customers were left out.
Also, what is the table or is there a table where business partner master data is held. E.g KNA1 is for customers.

Hi,
The BP table is BUT000. There is no comparison table that tells you which customers are linked to which business partner. There is a CVI link table but that contains GUID.
Alternatively you can use the log of the program that sends the open items to collections management. That log will tell you what BP are not synchronized.
Regards,
Richard

Tables to link Business Partner number and User Name

Hello SAP Experts,
I'm having a hard time looking for the relationship tables that could link the Business Partner numbers with the user name of a user. I have tried to link the BUT* tables, the USR21 table, and several HRP* tables and I can't seem to find a link. For the table BUT000, the field XUBNAME which is suppose to contain the user names of the users are left blank for some reason.
I just want to ask if there is any other table relationships I can check so I can retrieve the User name of a user using his/her BP number or vice versa. Thank you in advance!
Regards,
Romeo

hi,
i am not sure about tables but you can use FM BP_CENTRALPERSON_GET to get the user name from BP and vice versa. Get the BP guid from BUT000 table and give that to the FM
thanks,
sankar.

Add business partner to target group - some data missing

Hello,
I created a target group. This target group includes data of person and the associated data of organization (for example: city, street, ...). Now I want add some other person. I have two opportunities when I have open the target group:
1. In the table of the target group
In the column "Business Partner ID" I can open the input help and search the person which I want add zu the target group
2. In the view of the target group
On the top there is a button "Import Business Parterns", there I can upload txt files with the bp-no. from the person.
It works only the first possibility. There are all data of person and organization included.
At the second possibility there are the data of person included, but it lacks the data of organization and I don't know why.
Does anybody know, what's the problem? Is it standard or is it a bug?
Thank you in advance.
Best regards, Jasmin

For information:
When you want add business partner by file upload to the target group, in the SAP standard the target group can handle only one ID, either the account ID or th contact ID. So when I add some contact IDs by file upload to the target group then I miss the data of the account. So, I have to build up the same target group a second time.

Business Partner: Minority status in Bidder Data

Hello
i am analysing the possibility to activate the Minority Status flag + date to
in BP transaction of our SRM 4.0.
I was able to activate it on the related screen but I am facing problems:
1. for one testing BP I was able to insert X to the flag + date to ... but only first time
2. the inserted field is not found in the tables:
BBP_TMP_BID
BID000
BBP_TMP_BID000
at least one of them should hold the saved fields
MIN_OWN (BBP_MIN_OWN)
MIN_OWN_EXP (BBP_MIN_OWN_EXP)
but all 3 tables are empty
Why?
3. when I am trying to remove my previously inserted flag and SAVE. SAP gives me an error message:
"Bidder Indicator not available"
4. when I am tryng to change the previously (first time) set date field - I change it and save OK, but after returning to the same Business Partner the date is unchanged
does anybody has some idea how these field in Bidder data works?
thanx in advance
Imrich

i solved this myself.
i found out related data stored in table BBPM_BUT_FRG0021.

Limit the number of Business Partner relations in BP Master data

Hello Gurus,
I have a requirement where I have to limit the number of business partner relations to 2 at BP Master Data.For example for a BP X, there cant be more than 2 contact persons. So in the relationship tab they should not be able to add more than 2 contact persons. I know we can do this partner processing in sales transactions, but not sure we can implement the same in BP Master Data.
Thanks a Lot in advance for your replies,
Krishna.

Hi,
You can achieve this by customizing. Go to Transaction BUBA. Double click on you relationship category. Now change the cardinality. In your case it will be 0:2 .
This will solve your problem.
Thanks and warm regards,
Smita.

Enhancement of Business Partner (Relationships) using BDT -Bus Data Toolset

Dear Experts,
I have a requirement from my customer enhancing the Business Partner Relationships using BDT.
I should add 2 fields namely salary, employer start date in the Business partner Relationships, it must be added in the characteristics of relationships as one employee can have multiple employers and vice versa.
If I would like to add the fields in Business Relationships using BDT, are the steps same as adding fields in business partner? or do we need to perform any other steps? Did someone already did this type of modification, please provide your suggestions.
After adding the fields is it possible to cusomize the fields for history of the changes? e.g. if salary field has been newly added and after creating a BP after some days I want to change the salary and for the changed salary I want to have a history.
I would appreciate if you can help me with your suggestions.
Many thanks and best regards,
Afroz

Solved the problem Using EEWB.

Link for Business Partner number and Address number.

Hi,
I have few Address Numbers below for which I need the corresponding Business Partner numbers. These Address numbers which are below aer from Table CDPOS in objectid field.
BP 0000025867
BP 0000049717
BP 0000049718
BP 0000049719
BP 0000049720
BP 0000049721
BP 0000049722
BP 0000049729
BP 0000049730
I have put 25867 in BUT000-PARTNER, there is a entry and hence 25867 is the BP for Address no 25867.
I have put 49718 in BUT020-ADDRNUMBER,there is an entry in BUT020-PARTNER ie., 0007000059 is BP for Address no 49718.
Can you provide any link for Address No BP 0000049717 where i can get the Corresponding BP no for this Address no 49717.
Regards,
Deepthi.

Hello Deepthi,
May be the address is not maintained for the BP: 49717?
I am not sure if that is possible, just a guess.
BR,
Suhas

Business Partner ID and Vendor creation

Hi All,
My client does not want to create Vendor IDs for potential vendor during RFx until awarded.
My situation is if the supplier registers to buyer Business partner id is created first. Buyer still cannot proceed with PO processing(classic scenario) until a vendor id is created at the backend and replicated to SRM.
My question is how do we tie the Vendor Id of back end and Business Partner Id in SRM hoping that custom development is triggered to create vendor at the back end immediately after the supplier is awarded.
Please advise.
Regards
Rao,

Hello Rao
I am also looking for solution. could you give some details on this, How did you solve your problem.
Thanks,
Ram

Business Partner Datasources and ARFCSSTATE table data increase

Similar Messages

Maybe you are looking for