Business partner field in CRM - Corresponding field in ECC

Hi Middlware/CRM Gurus.
I would greatly appreciate if anyone can answer this quesiton:
I need to find out field in ECC customer master data that gets mapped to CRM data.
Basically I am looking for field mapping of ECC Customer master data to CRM master data.
If I go to CRM Business partner creation and need to know if this field gets replicated to ECC and if it does what is the corresponding table/field it gets stored in ECC?
Any help is greatly appreciated!
Thank you!

Hello Uday,
There is no one to one mapping between CRM table and R/3 table.
Please find below few of the R/3 tables for BP:
KNA1
KNAS
KNBK
KNVA
KNVI
KNVK
KNVP
KNVV
You can open then in txn:SE11 and check for field descriptions of the table.
And corresponding CRM tables would be,
BUT000
BUT020
BUT*
ADRC
etc
Hope this helps!
Thanks and Best Regards,
Shanthala Kudva.

Similar Messages

  • Business partner replication from CRM to ECC

    Hi everyone,
        In case of vendor master data after business partner creation  in CRM  the vendor Master Data should get created in ECC
    system also at the moment i dont have an idea whether it will get replicated to ecc are not can any one help me how to acheive this requirement.

    >>Messages sent when I test corresponding proxy interface, but not sent when I try to create or modify BP. What else should I check to find out the reason of this problem?
    BP Creation will be done be a standard SAP program may be a Function Module. Change Pointer or User Exist should be added to this BP Creation Function Module in order to trigger the Proxy Class with BP data.
    Though am not an ABAP expert, I guess the changesshould be done to the standard flow to trigger Proxy Class also..
    ~SaNv...

  • Mass Update of Business Partner Data in CRM

    Hi,
    I would like to know how I can perform a mass update of business partner data in CRM and then have this replicated into R/3.
    I have found notes 802804, 876602, 859632 but these only apply to CRM 5.0 and we are currently working on CRM 4.0.  Does anyone know of anything similar which exists in CRM 4.0?
    I have checked other posts and found help files links like the one below but is this only on CRM 5.0?  (http://help.sap.com/saphelp_crm50/helpdata/en/3c/9b56fae6c7424cafcdf17370399812/frameset.htm )
    Has anyone used the tx. MASS in CRM?
    Also our volume update levels is as high as 300,000 record and updating in CRM and replicating into R/3 through the middleware is causing performance problems.
    Does anyone have any tips on the best approach for this?  Many thanks.
    Regards
    JoJo

    Mass not available in 4.0, could write your own LSMW routine but you still will create bdocs for updates so not sure how that will improve your performance.

  • Middleware: Business Partner replication from CRM 4.0 -- R/3 4.6c.

    Business Partner created in CRM & is getting replicated into R/3 with Sales Area Data. Configuration is working fine.
    Requirement: Automate Accounting view creation in R/3 using middleware.
    1. That is if the user creates Sales view using sales organisation "xxxx" in CRM then the system should create Accounting view in R/3 company code  "YYYY".
    Please confirm, wheather its possible? ? How?
    2. If in CRM, the Sales Organisation is "AAAA", then create accounting view in company code "BBBB" (R/3)
    Your valuable input please.
    With Regards,
    Bapu

    Hi Tiest,
    Yes, PIDE entries made.
    BP is replcating in R/3 successfully.
    In R/3 transaction "XD01" if we create customer along with "Account Group" & "Company code", view "company code data" is visible. I would like to populate this view with "Reconciliation account" entry.
    While passing data from CRM, I would like to pass company code. At present, while passing BP from CRM to R/3, Account View is not getting created.
    Ex. If the user creates Sales view using sales
    Organisation xxxx in CRM then the system should create Accounting view in R/3 company code YYYY.
    Please reply, if further information required.

  • Extracting Business Partner information from CRM to XI

    What is the best approach to extract Business Partner information from CRM to XI

    Hi,
    by IDOCs of course
    you can create them just like I did:
    /people/michal.krawczyk2/blog/2006/11/14/xipi-data-type-enhancements-standard-business-partner
    (you jut need to change from proxy to ALE - another module)
    but bisically it's a standard to generate
    a business partner record and send it as an IDOC from CRM
    Regards,
    michal

  • Updating business partner addresses in CRM

    Hi,
    I Need to build a interface to update business partner addresses in CRM and assign it to a address usage. I can not find a suitable FM/BAPI for this purpose. Please advise me how to accomplish this.

    Hi,
    Where do you start to activate or configure Business Address Services in R/3 Business partners. Any links to user guides or startup documents will be greatly helpful.
    Thanks very much
    Cheers!
    Padi

  • BPs with Business Partner (Gnrl) role are not replicating to ECC

    Dear all,
    I want to replicate BPs with General Business Partner role from CRM to ECC, all sold to pary (Role) customers are replicating to ECC perfectly.
    Kindly help. your help will be greately appreciated.
    Best regards
    Shravanthi R

    Hi Srinivas,
    Could you please eloberate that, how and where can I maintain filter settings for BP roles.
    I have reached R3AC1>BUPA_MAIN>FILTER SETTINGS-->SELECTED SOURCE SYSTEM AS 'OLTP'.
    Don't know how to proceed further, Please help.
    Your help will be appreciated.
    Best regards
    Sharavanthi R

  • Business Partner Search using Sales Area Fields

    Hi,
    I am wondering if anybody knows how to enable sales area fields as search criterias for business partner search?
    The component is BP_HEAD_SEARCH.  When I go into configuration of view BP_HEAD_SEARCH/MainSearch I find no Sales Area related available search criterias. Am I the first to ask for this option or did SAP ignore the requirements of the customers? It seems for me to be a very basic requirement.
    Please help.
    Thanks!
    /Elvez

    Hello,
    This option has never been present in any previous CRM versions and not in the 2007.
    If you want this functionality I guess you'll have to develop it from scratch.
    I would agree with you that this is a basic requirement if it's a R/3 system where business partners are more sales area oriented. But this is a CRM system...
    Regards,
    Joost

  • Business Partner Creation/Display - General Data fields are missing

    Hi,
    We have an issue in our ECC6.0 system. In FPP1/FPP2/FPP3 transactions General data fields such as Driver's license, SSN, Employee class are missing under Identification tab. But the same are displayed in BP transaction code. What configuration would causing this issue.

    I found a SAP Note 844949 which is talking about the same kind of issue. As per the note I regenerated subscreen containers for application object BUPA.
    Call transaction BUSP and generate the subscreen containers for the application objects BUPA, FICA and BUPR. To do this, set the "All screens" indicator under "Generate All Screens or Just Selected Screens".
    If this does not correct the incorrect display, use transaction BUPT for the business partner or transaction CAWM for the contract account to make sure that the fields are not missing due to the field modifications. (If you cannot call these transactions, exit the SAP Easy Access menu by using /n and then call BUPT or CAWM.

  • How create a business partner (BUP1) with a default field?

    HI,
    I need to implement these changes, when the user calls the transaction BUP1:
    - The user must create a Business Partner with a field already filled by default.
    Any help will be appreciated.
    Regards
    Mark

    Hi Mark,
    When you create an Attribute set there is a check box named 'Default'. When you select this field then your attribute set will appear as default. You can do the same for the attributes, if you want to define a default value for an attribute.
    Also, in Customizing spro > Cross-Application Components> SAP business Partner --> business Partner --> Basic Settings --> Field Groupings --> Configure Field attributes per activity,  it is possible to define, if you create a customer, that the Attributes Set field should be : displayed, hidden etc.
    Hope this helps!
    Best regards,
    Roula Lazaridou

  • Business partner change Valid From Date field

    How can I change the Valid From Date field in tables:
    BUT000
    BUT020
    BUT0BK
    BUT100
    Currently the of date of creation of the business partner is in this tables' Valid From field.
    In transaction BP the Address of the Business Partner is  valid from 01.01.1990 but still I get a warning that the business partner is not valid for date 01.11.2011.

    Sounds like the problem is the valid to date.  What is that date set to?

  • Business Partner Replication from CRM to R/3

    Hello friends,
    I am not able to replicate BP from CRM to R/3. When i create a business partner i see bdoc
    in SMW01 with status in yellow colour and there is no error description. If i try to debug
    the replication in foreground, i can see all the entries which i entered in CRM done in R/3,
    but it stops at the Customer attribute screen(Additiona fields as seen in Extras in the task
    bar) and doesnot goes further, even if i enter something it remains in the same state. As
    per me the customer attribute field in not mandatory in R/3, i dint found the settings for
    it in SPRO but logically if R/3 system allows me to save the customer without entering the
    attributes then my thinking should be right.
    Kindly give me some pointers to resolve this or please let me know the check points,
    prerequisites for replication of customers from CRM to R/3.
    Thanks & Regards,
    Yogesh

    Hi Yogesh,
    Check the R/3 transaction OB20, Double clidk on "Create Customer (Centrally) "
    Here we maintain the options for all the field e.g required / optional etc..
    <b>Reward points if it helps!!</b>
    Best regards,
    Vikash.

  • How to stop the replication of a particular business partner from sap crm to sap ecc - BDOC

    Hi experts,
    I need to know the procedure to stop replicating a particular BP #1234(example) from CRM to ECC. I don't want this BP to be replicated in ECC as in ECC this BP will not be maintained.
    BDOC failure:
    In my current scenario BDOCs are failing with error like "No BP exist". Since this BP #1234 itself is not present in ECC, the error is obvious.
    This BP #1234 is defined in CRM as an Org. Unit. We don't maintain Org. Unit in ECC. All other BP are saved under this BP(#1234).
    Issue:
    So whenever a new BP(example #ABC) is created, the BUPA_REL type BDOC fails with error "BP with number #1234 doesnot exist.
    I don't want this to happen. So what i found if we can stop the replication of this particular BP #1234, then if we make any change to the relation BP, this error should not come.
    Please help me to resolve this BDOC error.
    regards,
    Vicky

    Hi Ganesh,
    1st we create a Organization structure through tcode-PPOSA_CRM.
    A business Partner is created which represent the Organization Structure partner ID.
    2nd we create a BP through and do a Org. assignment in tcode - PPOSA_CRM.
    A business Partner is created which represent the any customer partner ID.
    As soon as you do an assignment,assigning the customer BP to the org BP, a BUPA_REL BDoc flow but it fails.
    Error we get in the BDoc: "BP XXXX doesnot exist"
    Reason: Since this Org BP is not present in ECC, the BDoc fails in CRM.
    Possible Resolution 1:
    1. I created this Org. BP in ECC through CRMM_BUPA_MAP
    2. The BP got created.
    3.Then i tried to assign a new customer BP to Org BP to check if the issue is resolved, but we get another type of error 'BP is not defined as internal Org. Unit".
    I don't know how to define BP as an internal Org. Unit in ECC?
    Can you please help me in this.
    Possible Resolution 2:
    If i can stop this particular BUPA_REL BDoc which contains this Org.unit BP, from getting replicated, means when i assign the customer BP to Org.Unit BP, BUPA_REL should not be triggered.
    I don't know if this is possible or not, but if this is possible, i would consider this a last option to resolve this issue.
    Please let me know if this helps you to understand the issue i am facing?
    regards,
    Vicky

  • Business Partner creation in CRM/SRM with ID Management

    Hi,
    I have tried to find info about Business partner management with IDM to CRM/SRM...
    Customer would have two use cases.. Internal and External users...
    Internal use case is quite straight forward in IDM documentation.. I have two questions about this,,,
    1. ALE connection from HCM to CRM/SRM to create BPs to internal users... is there anywhere documentation how to configure this ALE connection?
    2. Is after SU01 user is created - Linking to BP automatical when using Business Suite connector ?
    External use case. Customer would like to implement scenario, where BP is created either:
    1. on CRM/SRM and IDM user would be created... and after approving new IDM user SU01 user with roles would be created nd BP linking would happen...
    2. on IDM user is created - BP and SU01 user would be created on CRM side... and linking between them..
    On external use case I have understood- that first one is possible without stronger customization and ABAP programming?
    --- first one requires VDS and SPML ID store on IDM side
    And something to send Newly created BP from CRM to IDM with SPML
    or does IDM check regularry with SPML CRM for newly created BPs??
    Does anyone know how actually this is happening?
    And is there any special configuration needed on CRM side? or some transaction to run after BP creation?
    IDM version 7.1 SP5
    Ystävällisin terveisin / Kind Regards
    Veli-Matti Luotonen

    Hi,
    Check whether the BP roles have been defined in the system.
    Go to  Customizing:
    Cross-Application Components -> SAP Business Partner -> Business Partner -> Basic Settings -> Define BP Roles
    Here you can define BP Roles and BP Categories.
    Make sure the appropriate category is assigned to the BP role that you are trying to create. For this select the BP role and click on the "details" button.
    Also read the documentation provided here.
    Regards,
    Reema.
    PS. Reward appropriate points to useful answers.

  • Business Partner Count in CRM or ECC system

    Hi Experts,
    We have a scenario in CRM. I need the unique Business Partner List.(these are also replicated in ECC)
    The scenario are as below:
    1.We are creating a Business Partner(BP) for each customer.
    2.For each of these BP, Contract acounts are also created.
    3.One BP has multiple Contract accounts.
    4.One BP has multiple relationships.
    5.One BP having multiple contract accounts has multiple Contracts.
    6.For one premise,one BP has one contracts account and one contract only.
    I need the unique BP.But i am unable to find the unique BP as duplicate BPs are also present in the system which are created due to below reason:
    1. By mistake. But duplicate BP don't have any contract account associated with it.
    2.If i am an owner of a house, i have my family members or my room mate who stays with me and they are included as a BP relationship. But for them also BP are created.
    I have checked in tables BUT000 and BUT100 etc but not able to extract exact number of BP.
    The reason for finding the Unique BP is:
    There is a company which provides services to customers. Now for each customer, a BP is created. but due to mistake or due to above reason, the customer service representatives has created duplicates or not important BP which are the secondary customers.
    Now to know the exact number of BP which will inturn tell me the exact number of customers, please help me know how to extract the data.
    regards,
    Vicky

    Hi Vicky ,
    I have following comments -
    1. How these contract accounts are created ? Through any enhancement done ?
    2. You can differentiate the same based on the number range, if you are using different number range for source account and the contract accounts.  Say for source account you can keep a number range which will be different than the contract accounts.
    3. Also, as a standard, if you create any relationship, it will anyway create a BP id in the system.
    4. Also, if possible do the data cleansing by archiving the duplicate BP records in your system.
    Hope this will be useful
    Thanks and Regards
    DJ

Maybe you are looking for