Business partner - how many address ?

Helo expert,
I created a business partner with 2 role ( I mean 2 type - customer and vendor ).
I check the number of address created, and I see that the system created one address for each
business partner type.
Exemple: 1 address ( in the ADRC table ) for business partner customer type and
               1 address ( in the ADRC table ) for business partner vendor type ...
My question is:
If I know the bp created, how is possible to know all address created ?
(Via BUT020 table is showed only 1 address )
Some idea ?
some bapi, or table ?
tks a lot.

Hi ,
check table LFA1 and KNA1.
in LFA1 u will find vendor related information and in KNA1 u will find customer related info..
Regards,
Anuj

Similar Messages

  • How can I identify a business partner as rented address in WebUI?

    Hello,
    if you create business partners for a rented external list, then they are flagged as Rented Address in the business partner master data.
    How can I identify a business partner as rented address in WebUI? What is the relevant field?
    Thanks in advance.
    Best regards,
    ANVAN

    Hi Anvan,
    Component BP_HEAD
    Rented Adress flag is in context node MARKETING   (MARKETING/STRUCT.IS_RENTED).
    SAP GUI->tab Classification
    Regards
    Edited by: Meifo on Oct 26, 2010 12:30 PM

  • How many addresses can i send an e mail to in one go? is there a limit?

    I am trying to send a mail to all my contacts in one go. is there a limit on how many addresses can be entered into the to/cc or bcc lines in one go?

    Every mail service provider imposes such limits. The limits for iCloud are given here:
    iCloud: Mail specifications
    For legitimate bulk mailing, you should use a hosted service such as "MailChimp."

  • Link for Business Partner number and Address number.

    Hi,
    I have few Address Numbers below for which I need the corresponding Business Partner numbers. These Address numbers which are below aer from Table  CDPOS in objectid field.
    BP  0000025867
    BP  0000049717
    BP  0000049718
    BP  0000049719
    BP  0000049720
    BP  0000049721
    BP  0000049722
    BP  0000049729
    BP  0000049730
    I have put 25867 in BUT000-PARTNER, there is a entry and hence 25867 is the BP for Address no 25867.
    I have put 49718 in BUT020-ADDRNUMBER,there is an entry in BUT020-PARTNER ie., 0007000059 is BP for Address no 49718.
    Can you provide any link for Address No  BP  0000049717 where i can get the Corresponding BP no for this Address no 49717.
    Regards,
    Deepthi.

    Hello Deepthi,
    May be the address is not maintained for the BP: 49717?
    I am not sure if that is possible, just a guess.
    BR,
    Suhas

  • Business Partner (BP) multiple addresses

    Hi,
    In my report I need to pull company address. I am able to pull the company address but if the company has multiple address (BP-->Address overview) then its pulling up that company that many times.
    How can I get only the default address?
    Regards,
    D

    Hi
    There are different tag marked with the address when it is filled initially through BP transaction.
    To pull the correct or required address you need to initialize that in the query.
    If more than one address is maintained in the system for same address type. You need to make one address as a default or standard address and while fetching initialize that in the query. If you dont put the flag in the query, it will not give the desired result.
    Regards
    Mithlesh

  • Using Skype - Business Version - How Many People c...

    To whom it may concern,
    I am thinking of signing up to the Skype Business Version, but am concerned that it will not be able to handle the number of people that we require on the conference call.  We regularly require 12 people or more on a conference call, can you please advise if this is possible using Skype Business Version.  Please can you also advise what the maximum number is.
    Regards
    Trevor Barrett
    e-mail: [email protected]

    The current maximum number of participants on a conference call is 25 and video group call is 10.
    Regards,
    Tamim
    Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
    If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

  • How many addresses can you put in AddressBook?

    I posted this on the Tiger forum in error since I'm running OS 10.3.9 on an old G-4 (whoever thought back in 2000 that a G-4 would be "old"?).
    I'm putting the email mailing list for my brother-in-law's restaurant (House on the Hill, Poway, CA) into AddressBook. I'm up to 500 people, plus my own personal people.
    Anyone know the limitations of AddressBook? Is there a product out there better suited to handling this chore?
    Thanks for any knowledge available . . .

    Here’s a post from someone with 11,000.
    http://www.macworld.com/forums/ubbthreads/showflat.php?Cat=0&Number=509063&Main= 509063
    I don't think there is a numerical limit of addresses. It's probably based on a maximum file size limit like 4GB, although, there may not be a limit.
     Cheers, Tom

  • How many addresses in a mailing list?

    Hi everybody, i have a mailing list counting almost 700 addresses. All of them are correct. However, if I put all the addresses in a message, a warning appears, with all the addresses, saying I cannot use the server (choose another-one, try later, edit the message).
    To overcome the problem, I have to divide the list in 7 one hundred addresses parts. In this way, it works.
    I am a subscriber of mobile.me, so I'm paying for the mobile.me services.
    My question is: should I do something special to send a message to 600 people in one installment or should I ask Apple to let me increase the number of addresses allowed, probably paying more?
    Thanks
    Paolo

    Probably would be a "no go" to ask, but you can always try. See:
    http://support.apple.com/kb/TS2883
    Even with your breaking it down to groups of 100, you may run into limits.
    Ernie

  • Additional addresses as business partner

    Hi experts,
    I am working on CRM 2007.I have a scenerio where I have to maintain mutiple addresses to a business partner.Please suggest me ,how can I achieve this?
    Regards,
    Sunitha

    Hi Sunitha,
    You go to SPRO>Cross application components>SAP Business Partner>Business Partner>Basic Setting>Address determination>Define Address Type.
    Here you can maintain different address type for your Business Partner and can label them as per your business requirement.
    Regards,
    Priyadarshan

  • Number ranges for Business Partner

    Hello experts,
    Can you please guide how to define different number ranges for differenet different parner functions such Bidder and Employee.
    Presently when I create a new employee for a Business partner who has newly registered with SRM, they both are getting same range of BP number, which makes the user list very long to manage/search while creating BID/Auction invitation.
    Please guide me. Thanks in advance
    Vijay

    Hello,
    find below the settings of table T77S0 in our system. We use grouping Z4 for org units. Be aware of the fact that number range and grouping have to have the same ID in this case.
    Regards
    Wolfgang
    GRPID SEMID GSVAL      ETEXT
    HRALX HRAC  X          Activate HR Integration
    HRALX MERID X          Enter Integration Error in IDOC
    HRALX MSGRE 0          Recipient of Error Message When Creating BP
    HRALX OADBP            Business Partner of Standard Address
    HRALX OADRE            Address Necessary for Business Partner?
    HRALX OBPON ON         Integration O-BP Activated
    HRALX OBWIG X          Ignore Business Partner Warnings
    HRALX ONUMB 2          Business Partner Number Assignment (Org. Unit)
    HRALX OPROL BUP004
    HRALX OSUBG Z4         Business Partner Subgroup (Organizational Unit)
    HRALX PALEO            Log: Organizational Units in ALE
    HRALX PALEP            Log: Employees in ALE
    HRALX PBPHR OFF        Employees Are Replicated from HR System
    HRALX PBPON ON
    HRALX PCATS            Integration P-BP for CATS Activated
    HRALX PINAC            Activate ALE Distribution of Inactive Employees
    HRALX PLEVE 3          Log: Detail Level of Error Messages (1 - 5)
    HRALX PNUMB 3          Business Partner Number Assignment (Employee)
    HRALX PPROL BUP003
    HRALX PQUAL            Import Qualifications
    HRALX PRTON            Log Active
    HRALX PSUBG            Business Partner Subgroup (Employees)
    HRALX PSYNO            Log: Organizational Units in Dialog
    HRALX PSYNP            Log: Employees in Dialog
    HRALX USRAC X          Create Relationship to User

  • Retrival of tel no. and mob. no for a Business Partner (SAP IS-U)

    Hi,
    There is a requirement in my report where-in i need to display the telephone number and the mobile number of a business partner contained in Address-Independent Communication.
    Do you how we can retreive these number preferably from TABLES ?
    Regards,
    Imran

    Irrespective of the module of SAP you can find the tables of any fields
    goto se80
    |
    click on repository information system
    |
    expand ABAP Dictionary
    |
    expand fields
    |
    double click on table fields
    on the right side of the screen enter the fieldname/description of the field and press execute to find the tables where the field is present. once you get into one table you can know the others by clicking on the where used list.
    regards,
    srinivas

  • Change in the layout of business partner

    I have a scenario where the user creates a business partner and the address is keyed in the street/house number field. business partner is auto created as customer in FI and in FI , they are using street 2 to street 5 for address instead. Is it possible to activate fields street2,3,4 and 4 in business partner.

    Hi Surya,
    How are you?
    we are also facing the same issue regarding activating the fields Street 2, Street 3 and Street 5, could you please advice us how to go about doing that?
    we dont want those fields to be mandatory either and they should be optional only.
    thanks in advance,
    Chandan

  • How many sites does the 35.99 get you

    Hello with business catalyst how many websites does the 35.99 get a client? I am a new partner and want to be sure I am giving correct information. Am i reading this right that it gives you 5 sites?

    Hi there,
    If you are a creative cloud account holder and paying the monthly for that you get 5 very basic versions of BC.
    For that price you mention:
    http://www.businesscatalyst.com/pricing/yearly
    You get one webcommerce package (1 site)

  • Regarding creation of business partner.

    Hi,
    when we are creating a business partner,how to get the different fields like person,organisation etc.What all bapi's or function modules can be used.
    can anyone help me in this regards?
    Thanks in advance,
    shwetha

    Regarding available BAPI's for Business partner(BP), you can check in transaction BAPI.
    Coming to different different fields for person and organisation, the question is not clear to me. Person, Organisation and Group are different categories of a BP and this we will select when creating a BP. So, the first step in creating a BP is selecting the category. Hence there is no seperate field to maintain the same.
    Regards,
    Sruendra

  • Org Unit Business Partner number missing

    Hi Guy's
    I have created some Org models with some Org units and positions in it... But for some reasons I could not able to see any business partner numbers assigned to these Org units..... I hope these numbers automatically come from CRM system...
    Could you tell me is it a Technical issue or Functional issue???
    Please let me know if you have any solution to resolve this
    Thank you very much in advance....

    Hi Sr,
    To get the role 'organizational unit'  for BP make sure you have  HRALX - OPROL - BUP004
    You can mail to [email protected]
    Regards,
    Paul Kondaveeti
    <b>Also see the help extract from customizing:</b>
    Set Up Integration with Organizational Management
    In this IMG activity, you integrate business partner data with HR master data (organizational model and employees).
    Activities
    1. Activate global HR integration by setting the main switch HRALX/HRAC to 'X'.
    2. Activate the integration between business partners and organizational units by setting the switch HRALX/OBPON to 'ON'.
    3. Activate the integration between business partners and employees by setting the switch HRALX/PBPON to 'ON'.
    4. Numbers can generally be assigned in three ways when creating business partners:
    a) Number is taken as before from the general internal interval for number range object BU_PARTNER.
    b) Number is taken from the special internal interval for the object.
    c) Number is taken from HR and given a prefix. A special external interval is used, which has to be defined as XX00000000 to XX99999999, where XX stands for any two letters.
    Number assignment is set for organizational units using HRALX/ONUMB, and for employees using HRALX/PNUMB.
    The number range object for all switch values is BU_PARTNER, the interval being dependent on the switch value. The internal standard interval is used for switch value 1, for switch values 2 and 3 the interval is defined by the switch HRALX/OSUBG or HRALX/PSUBG. For switch values 2 and 3, a grouping also needs be created for these intervals using transaction BUC2.
    To enable the system to connect the grouping and the number range interval, the name of the grouping must be exactly the same as that of the corresponding number range interval. The name of the grouping is in the first column of the table.
    If you choose number assignment type 3 for business partners with the role employee (switch HRALX/PNUMB = 3), create the switch HRALX/PSUBG manually in table T77S0.
    5. If you would like users to be informed by e-mail when errors occur, the recipient can be defined in switch HRALX/MSGRE (0=No messages, 1=Workflow administrator is notified, 2=User receives mail, 3=Both are informed).
    6. If addresses are required to generate business partners correctly, the switch HRALX/OADRE must be set to 'X'. The standard address to be assigned to every organizational unit without its own address can be defined using HRALX/OADBP.
    To create a standard address, create a business partner with an address and then enter this business partner's number in the switch.
    7. If qualifications for employees are also to be transferred, the switch HRALX/PQUAL must be set to 'X'.
    Effects on Existing Data
    If you have already transferred employees from a connected HR System in an earlier CRM Release and have now upgraded, the relevant employees (personnel numbers) must be transferred again to the CRM System by initial distribution. This enables important employee information to be stored in the target system, and changes to be transferred correctly to the business partner master records.
    Message was edited by:
            Paul Kondaveeti

Maybe you are looking for