Business partner in Fact Sheet for Individual object

Hi Folks,
I am unable to see the assigned business partners on the Fact Sheet for an Individual object. I have created the iObject in the portal. Here, I could not assign any BP's during the creation as the system does not have this option. I then went ahead and created an Installed Base and assigned this iobject to it in the CRM system in transaction [IB51] "Create Installed Base". I then went ahead and assigned the Business Partners to this iObject.
The situation is that I can see the assigned Business Partners in the Portal for this iObject/Component for the Installed Base in the "Installed Bases/Components" tab but when i go to the "Fact Sheet for Installed Bases" tab I am unable to see the assigned BP's.
I haven't been able to find any documentation on it either. Can someone please help.
Thanks.

Hi,
Did you ever solve this issue?
I too am having the same problem and cannot display the factsheet or summary using the 'Go To' button in EP.
Any help would be much appreciated.
Regards
Jo

Similar Messages

Error message "No business partner could be created for vendor ..."

Dear experts,
I had made all the customizing settings for BP and CVI vendor/customer - BP integration and synchronization settings before. BP creation from vendor and usage within Real Estate was working with no problems. When i tried to create a new BP role recently i must have changed the settings and now when creating BP from vendor (FLBPC1) i get the following message:
No business partner could be created for vendor"
The long text of the message is:
Message no. CVIV_UI013
Diagnosis
No business partner could be created from the vendor selected.
System Response
An error occurred when creating a business partner from the vendor selected. This error prevents data from being transferred and saved. This could be due to the following:
Fields have been left blank in the vendor that are set as required entry fields for the business partner.
Settings for assigning Customizing values for the vendor to the business partner are incorrect.
Procedure
Start the Post Processing Office and check the error message. Make the necessary corrections.
I have checked all my customizing settings one by one but cant locate anything missing or wrong.
Also, in 956054 it is said that i must perform various migration reports, but i believe if it did work before without running these reports, this couldnt not be the problem now.
Any help would be appreciated
Thanks

Hi,
reason is the following.
The customer / vendor doesn't use special attribute to differentiate
between persons and organizations - in opposite to BP.
You can achieve what you want to do by using a BAdI prepared for that:
You'll find this in IMG transaction SPRO:
Cross-Application Components
Master Data Synchronization
    Customer/Vendor Integration
      Business Partner Settings
        BAdI: Data Assignment of Form of Address from Customer/Vendor t
Please read documentation of this BAdI in IMG.
You may use standard implementation CVI_MAP_BP_CATEGORY.
You also may create own implementation of the BAdI, if you want to
differentiate on other attributes.
Hope that helps.
Regards,
Franz

Quantity Unit for individual objects missing.

Hi,
i have the following problem using mobile service.
We need to enter individual objects in the service confirmation. I can select one, but the dropdown for the quantity unit is empty. Because of this beeing a mandatory field, i can not save the service confirmation. The select statement coming from the corresponding comboengine is using the SFAMARA key to search the SMOMARM for this information. This table is empty for individual objects.
Each equipment has a back reference to it's original material wich has got the information, even in SMOMARM.
so my question: In CRM-Online the back reference is used, in Mobile its using the individual object key. I would identify this as a bug. We are using Mobile 5.0 SP7, CRM 5.0 .
Has anybody experience with this and can support me? i found nothing in OSS! Maybe some customizing in CRM-Online or MSY. I don't know.
Thanks a lot,
Andreas Rose

Hi,
IObjects cannot be entered as items for service confirmations or orders as it makes no sense at all.
The reference to one or more IObjects will be done in Tileset <Subject/Objects> or <Item Subject/Objects>, Tile <Reference Objects>.
Regards,
Wolfhard

External no range for individual object

hello,
still have confusion in creating external no range for individual objects.
i have created to two subgroups i'e 01s & 01 C. & a $$$$ is alo der...in $$$$ ext range is 1-499999 & for 01S it is 201 -300 & for 01 C its 101-200..
but system is taking any no for positions & jobs with out restrictions..i think tht is because of $$$$ range..
thst wat my confusion is..can any one let me know wat to do for this...with an example...
do reply..
thanks & regards
Vinita

Self solved

Configuration for iObject Fact sheet for the PCUI

Dear all,
Can anyone guide me through the process of customizing an iView for Fact Sheet for the PCUI. I need to know the steps in the backend process in the IMG.
I really apprecaite the help.
Thanks,
Vick

Hi,
Did you ever solve this issue?
I too am having the same problem and cannot display the factsheet or summary using the 'Go To' button in EP.
Any help would be much appreciated.
Regards
Jo

Fact Sheet for Account under GoTo button CRM 5.0

Hi all,
I'm trying to display the fact sheet in Account, displayed in EP. It displays error page. But when try accessing the business partner cockpit using CRMD_ORDER_BP, I able to get the factsheet display. Is there any config I need to maintain separately for fact sheet in EP. Or is there any notes that I need to apply to get the same ?
Please advice me in this regards.
Thanks,
Jagadees K Arumugam

Hi,
Did you ever solve this issue?
I too am having the same problem and cannot display the factsheet or summary using the 'Go To' button in EP.
Any help would be much appreciated.
Regards
Jo

Configuring Fact sheet for CRM 2007

Hi guys
Went through best prcatice B08 and configured necessary steps for my factsheet
Also checked previous topic discussions and found this subject header under this forum Configuring Fact sheet in IC CRM 2007 : Pls help
I did exactly as said, factsheet shows under my nav bar, but when i confirm BP and navigate to factheet. It is not showing default view which inlcudes Ibase, Email, Lead and so on
All I want to see is my master data marketing attributes, physical address and previous transactions of that BP
Please advice what to do or what Im missing
Thanks
Jogi

Hi,
In component BSP_DLC_FS and View factsheetyou can select the page type and once the Layout type is chosen, you can select your Fact sheet views from available Fact Sheet Views and there you can assign your views.I think you must have activated the fact sheet button for your PFCG Role.
I went to Component BSP_DLC_FS and clicked on display.
Went to views and selected BSP_DLC_FS/factsheet. Where exactly do I select the page types and layouts and my factsheet views? Still fairly new to the the BSP_WD_CMPWB so please excuse
Thanks Jogi

How to generate Business Partner only in SAP for Naksia

Hi Everyone,
Having one issue, if you can help me out
In SAP when we run HRSYNC_PERSON report automatically it will generate Central Person and Business Partner.
Here my question is what options to select in this report to generate Central Person & Business Partner?
If I want to generate only Business Partner, then what options to be select, because in my system Central Person is already created.
Could you please help me on this issue.
Waiting for your response!!
Regards
Utkarsh

Hi Utkarsh:
Well, there's a variety of issues that could be causing this.
It could be your pernr is simply missing a valid infotype 6. A BP needs infotype 0,1,2 and 6 at a minimum to be generated.
It could be a problem with your actual Business Partner configuration. It would be good to see if you can generate a BP from scratch on your own using transaction BP. That will tell you if your BP config has any issues.
It could be a problem with tax jurisdictions in VERTEX or some geocode tables that need refreshing from client 000. It's hard to say from here. The lower left hand corner of the screen when you hit the 'synchronize' button should tell you why a BP wasn't generated.
Let me know what you get when you create a BP through transaction BP. Then let me know what the bottom left hand corner of HR_SYNC_PERSON says after you synchronize.
Thanks,
Chris

Error : Business partner has status "Flagged for Archiving"

Hi All,
I have error in order: Business partner (Sold to Party) .has status "Flagged for Archiving"
I removed the Click "Archiving Flag" from BP and I changed the order.
But still error is not going.
Can somebody suggest what to do for removing this error?
Regards
Jay

Hi Jay,
Follow these steps :
1. Go to Transaction BUPA_PRE_DA.
2. In the relevant fields, enter the BP number, mark the radio button for 'To be archived' , check the 'Reset Flag' check box.
3. Uncheck the 'test run' check box.
4. Execute.
This will reset the archiving flag.
Hope this solves your problem.
Cheers,
Rishu.

Business Partner Field Grouping Config for BBPMAININT transaction

Hi,
Vendor from ECC (6.0) are replicated to SRM (5.0) via the standard vendor replication program BBP_VENDOR_SYNC. In SRM, I want to hide/suppress some fields (ie: tax numbers) on the business partner transactions BBPMAININT and BP. I tried to acheive this via Business Partner Field Grouping config, and it works for BP transaction but it does not work for BBPMAININT transaction.
Does anyone know how to hide/suppress fields for BBPMAININT transaction?
Reference to Field Grouping config:
SPRO -> Cross-application oomponents -> SAP Business Partner -> Business Partner -> Basic Settings -> Field Groupings -> Configure Field Attribute per Client
Thanks,
Susan Wang

Hi,
See the foll threads for more pointers:
Vendor Master Extension in SRM
Business Partner Custome Fields Mandatory
BR,
Disha.
Do reward points for useful answers.

Change Sequencing Policy for individual objects? V9.0.4.9

Our TOPLink projects us using by default the sequence table model for its sequencing policy.
There are a few individual tables where native sequencing is being used, and I need to map these tables and be able to insert into them.
Can I change the sequencing policy for these few tables only in version v9.0.4.9? I believe this may be possible via a Descriptor Amendment, but cannot find the method(s) that allow me to change this...
Thanks in advance..
Greg

Our TOPLink projects us using by default the sequence
table model for its sequencing policy.
There are a few individual tables where native
sequencing is being used, and I need to map these
tables and be able to insert into them.
Can I change the sequencing policy for these few
tables only in version v9.0.4.9? I believe this may
be possible via a Descriptor Amendment, but cannot
find the method(s) that allow me to change this...
Thanks in advance..
GregIn 9.0.4.* you can do this in a descriptor amendment method by invoking the following API -
descriptor.setSequenceNumberName(String name). For Oracle native sequencing this needs to be the name of the Oracle sequence object.

Extracting custom attributes for individual objects

CRM service maintain those custom attributes and set types. By checking the 'BW relevant', it generates all the custom data sources for BW. The data sources are in $tmp, but can be viewd in RSO2.
Those custom attributes can be added to 0crmp_prod and updated via flexible update from those generated datasource. My concern is that it creates a lot of maintenance depending on the number of set types maintained in CRM. Currently there are about 50 set types being maintained in CRM, which means additional 50 transfer rules for 0crm_prod.
My question is whether there is more efficient way to handle this situation.
Thanks for any suggestion.
Jennifer

It sounds as if your custom attributes may not have been created properly which is leading to your current problem. When creating a new attribute, one of the final steps is adding it to a specific 'Class'. This is where you choose
Computer or User or any other specific need you have. It sounds very much like this is the piece that has been missed.
To fix it you'll first need to clean out the User specific pieces that have gotten into the system. Easier said than done, I understand, but it will be crucial going forward. Once cleaned, add the attributes to the Computer class one at a time
using the Active Directory Schema admin tool. You will need to be a member of the Enterprise Admins to add yourself into the Schema Admins and please remember to remove yourself after you are done (Best Practice).
Refer to this for additional info:
http://social.technet.microsoft.com/wiki/contents/articles/20319.how-to-create-a-custom-attribute-in-active-directory.aspx
and:
http://blogs.technet.com/b/isingh/archive/2007/02/18/adding-custom-attributes-in-active-directory.aspx
Hope that helps
Gary
Gary G. Gray
MCP, MCTS, MCITP, MCT Alumni
Please remember to mark the replies as answers if they are helpful.
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

Regarding Business Partner Roles in PCUI for CRM 4.0

Hi all,
We could not find an option to create a bp in a specific role using PCUI.
We are using CRM 4.0 with EP 7.0 nw 2004s. Also , our CRM has an ABAP component of version ABA 6.20.
I saw in a forum post that BP role functionality is not available with ABA 6.20. Is this true?
Using CRM best practices 3.40, can we get the role functionality into PCUI?
Can anyone advice us on this?
Thanks alot
Shobin

Shobin,
Unless you want to develop a custom Z-mac class to take care of this, you basically need to be at the next release of CRM in order for this to be possible, from what I remember.
In 4.0 this is not possible without custom development.
Take care,
Stephen

Can Business Partner record be used for creating an invoice

Hi All,
I have a small question... can we work with the BP record directly in invoice entryu2026 and if yes then can you please tell me how can I do that. I already have created a BP and now I want to use that BP as a vendor...so can I use that BP record to create an invoice.
Thanks,
Raj

Found myself that it's not possible to do this.

E-Recruitment,Syncronization for Employee and Business Partner not working?

hi there,
i itend to create a business partner for employee in SAP E RECRUITMENT but when i run the report HRALXSYNC for an employee, the result i am getting is total blank. I suppose there should be some errors if it is not working properly, but the the screen after running the report is total blank.
are any prior settings must me meet before the business partners can be created using HRALXSYNC?
thanks you

HI Ravi
Requirements to use the report are the activation of the integration for buisness partner. You could get details from sap note 550055.
You have to switch on the following keys in table T77S0 with SM30:
Group    Sem. ID
HRALX   HRAC           to 'X' for global HR-Integration
HRALX   OBPON        to "ON" for activate the integration between organization object and business partner
HRALX   PBPON         "ON" for activation the integration between central perosn and business partner
Hope this helps.
Regards
Bernd

Business partner in Fact Sheet for Individual object

Similar Messages

Maybe you are looking for