Business Partner in Solution Manager

Hi Experts,
I met with a problem when I try to create a support message.
I have created the business partner ID (31) for my user ID with the Role of Business Partner(Gen.) and Employee. I have also specify the <System ID><Installation Number><Client><User ID> (Separated by space in between) in the Identification tab with the ID type as CRM0001.
I try to create a support message by entering the mandatory field and hit "Enter" button, then after that I click on the "Save" button. The system prompt an error message indicating that "Business Partner 31 cannot be the reporter". But if I just click "Save" button without hitting "Enter" after entering the mandatory field, I will not hit with this problem.
Is there anything that I need to do in order to overcome this problem?
Best regards,
Xiu Lian

Hi charan,
Just in case if u have missed any of the below notes...
Note 835936 - Business partner cannot be deleted/archived
Note 415007 - Deletion of business partners
Let us know if u have any help from these....
VBr,
Sri
Award points for helpful answers

Similar Messages

Deletion of Business partner in Solution Manager

Hi
We have created the Business partner in solution Manager not able to
delete the Business partner.In transaction BUPA_DEL, when we select
Test run Check only, system gives the message like Business partner can
be deleted,but when we select other fields and execute,we get message
like No business partner deleted.
Regards
Charan

Hi charan,
Just in case if u have missed any of the below notes...
Note 835936 - Business partner cannot be deleted/archived
Note 415007 - Deletion of business partners
Let us know if u have any help from these....
VBr,
Sri
Award points for helpful answers

2 Identification Numbers to 1 Business Partner in Solution Manager

Hi,
Can anyone help me on this:
I have setup a solution manager with one ECC satellite system.
The user created in ECCstellite system, let call it USER_A, is assigned to business partner 123 in Solman.
When USER_A create the service desk from ECC, it will be captured into Solman under business partner 123.
What should I do to let USER_A to access all his issues captured in solmn through the web?
Please advice.
What I have tried to do is to create a user ID "USER_A" and assign it to the same business partner 123.
This is done by inserting the USER_A with different ID number in 123 business partner.
Is this the right approach?
I have also try to create another user ID, USER_B, and tie to business partner 123.
In this case, it is not working as per the approach mentioned above.
Please advice.
Regards,
Cheah

Hi
As per your writings i could say you are trying to access the service desk message via web.
you have to activate webdynpro applications in SICF, please check the blog
[Re: URL link to open Service Desk message|Re: URL link to open Service Desk message]
this helps you to access the servicedesk by workcenters.
The following work center roles will be required to access the same.
SAP_SMWORK_BASIC
SAP_SMWORK_INCIDENT_MAN
and check the below sap notes
1072324 HTTP Connect and SAP Solution Manager
1160651 Work Centers: How to Customize (Solution Manager)
1155893 Work Centers: Incident Management HTTP instead of HTTPS
Thanks,
Jansi

Does SAP business one require solution manager for license keys ?

Does SAP business one require solution manager for license keys or you can directly get the license key from service.sap.com?

Hi,
Welcome you post on the SAP business one forum.
In general, only SAP partner can get the license key. However, partner can assign the right to customer so that they can get it from portal directly.
Thanks,
Gordon

Copied Business Role in Solution Manager ITSM

Hi All
This is eunhwa.
I have a question regarindg copied business role in Solution Manager ITSM.
To copy business role, I copied technical roles Navigation profile, configuration key and PFCT Role ID. And then I copied
a business Role. And assign copied technical roles to copied business role.
And I changed Direct link group UI. For example, in copied business role ZSOLMANPRO, There were many
direct links, I only left ‘incident’ and ‘problem.
However when I selected incident’ in direct link, there was no transaction ‘zmin’ assign. I couldn’t create a incident.
Why this error happened? Is there anything which I miss?
Thanks.
Best Regards,
Eunhwa Park

Hi,
Well, there are multiple things you can check.
1. If you are using IE
You have to add the page/pop-up to the compatibility mode of your Browser.
IE -> EXTRAS -> Settings for Compatibility Mode -> Add -> Refresh the CRM WEB UI
2. Check if you had assign SM-CREATE in the ZSOLMANPRO Navigation profile. (In Assigning the direct link groups to Nav. Bar profile.
3. Check whether you had authorizations for ZMIN in PFCG profile.
4. Additionally check
1905448 - How to restrict the suggested transaction codes when creating an ITSM
Incident using CRM Web UI - Solution Manager
5. In define transaction types corresponding transaction types are active. (In SPRO under solman ->Capabilities->ITSM-> Transactions)
6. Check the copy control whether they are fine. (In SPRO under solman ->Capabilities->ITSM-> Transactions)
7. Ensure that the transaction type's channel definition in customizing is set to 'CRM Web-Client UI'
If your issue is still not resolved yet, please paste the error/screen you are getting.
Regards
Rishav

Problem in installation of Business Content for Solution Manager

Hi all,
I have a problem while trying to install the Business Content for Solution Manager. In detail, I cannot install/ see the Process chains. I am not much familiar with Business content installation, so maybe I missed and /or some step.
Following the instructions from SAP IMG (SPRO/ SAP IMG / Solution Manager / Configuration / Scenario-specific settings / Solution monitoring / BI Reporting / BI Client) , I activated the Datasource 0SM_SMG_ROOT , performed all the steps and installed all the relevant Business Objects (Infoobjects, Datasources, Infocubes, Infopackages, etc.). All the objects seen from transaction RSA1 seem correctly installed and activated.
The last step is the installation/activation of the Process chains. This step is executed, but the installation job terminates with messages like Infopackage 0SM_XXXX does not exist in D version; activation not possible. It seems like Process chains are looking for some Infopackage, and these are not present. They are not present indeed, and I dont know why. The result is that no Process chain is visible from transaction RSPC.
Am I missing some step, or doing a wrong/ incomplete procedure ?
Thanks a lot

HI Saravanan,
For Solman Service Desk, the following objects are used :
Cube : 0CSRV_C01
DSO : 0CRM_PROH
DataSource : 0CRM_SRV_PROCESS_H
And apart from this there are some MD datasources, for BPARTNER, USER STATUS, CATEGORY etc.
Regards
Mahesh Kumar

Automatic creation of business partners in Solution Manager system in Charm

When I automatically create business partners in the Solution Manager system from the users in the satellite systems, they are created of type "Business Partner (Gen)" and they are not associated to the user with the same name id in the Solution Manager system, but they are connected to the remote users in the satellite systems. For this reason I change manually every business partner making it of type "employee" and connecting it to the user in the Solution Manager system. In this way I can use it like partner function. Is this the correct procedure to follow? If not, what do I have to do? Which is the correct way to generate business partners in the Solution Manager system from the users in the satellite systems?
Thanks
Antonello

Hi,
It is advisable to have the same login name for the satellite systems and SOLMAN user.
Business partner can be created thru tcode DSWP -> Select Solution -> Edit -> Create business partner.
You need to create a business partner only once by the above method, even if you have a number of satellite systems.
Once the BP is created , go to tcode BP -> select the business partner -- > In the Identification Tab, enter the systems which will be accessed by the user. Here you can also give the SLM system ID in addition to the other satellite systems.
The employee connection process which you do is correct
Rgds
Abhijit

Business Partner for Issue Management

Hi! Does anyone have documentation on how to create a business partner in transaction BP and have it show up in the Processor list in Issue Management?
Thanks,
Lonny

Hi
for any users of solman issue management you need BP or master data
so you can call Tcode BP_GEN and then choose system followed users to create the BP
Once done you can simply goto BP for that particular user in BP tcode and choose the role as Employee then save it with userID because everybody is not processor.normally processor is the one providing solution to key users who raise incident
Regards
Prakhar
Edited by: Prakhar Saxena on May 25, 2011 3:39 PM

Using HR data in R/3 to create business partners in Solution Manager

Is it OK for me to setup Solution Manager to automatically download HR data from R/3 to create the Business Partners (employee role) in Solution Manager?
We have setup SAP CRM 4.0 to automatically download the HR data and create Business Partners (employee role) in CRM. Since Solution Manager has the CRM component in it, I assume we can do it as well in Solution Manager.
Regards,
Mel Calucin
Bentley Systems

We did it, i don't see the problem...

Error while creating Business Partner in Collections Management

Hello All,
I am trying to create Business partners for Customers in Collections Managment, specific to country Luxemburg. The error I am getting says that, 'Tax number category LU2 does not exist' and 'There is no BAPI field to screen field assignment'.
I have checked V_TFKTAXNUMTYPE table and LU2 is not defined there.
Appreciate if some one can help to locate where the system is picking up 'LU2' from, and help me fix this issue.
Thanks in advance,
Madhavi.
Edited by: Madhavi99 on Nov 19, 2010 3:52 PM

Krishna,
Using T-code SM30, check the table V_TFKTAXNUMTYPE, and you probably will not see an entry with CA0 in the table. This should be added here in this table (I am not sure how, may be it is a patch sent by SAP or an OSS note..We opened an OSS note and will let you know when I hear from SAP).
With out adding CA0 in the above mentioned table, you might be using the field for VAT registration field while creating BP master data. I figured out from the way we were trying to create BP, Country code (for example CA in your case) 0 ie., CA0, is for the VAT registration number, Country code1 (for example CA1) is for tax number 1, and CA2 is for tax number 2 fields.
After the above mentioned table is updated, using BP tcode, this code 'CA0' should be assigend to the business partner number that you are trying to create under identification tab.
I hope, I made it as clear and understandable as possible. But, if you have any quesitons, please let me know.
Regards,
Madhavi.

[Business Partner Master Data] Managment of Adresses Matrix (on CRD1)

Hi everybody,
I'm trying to update a user-defined field added in right martrix (Address infos) of Addresses panel in the Business Partner Master Data Form.
I want to check that the value is not empty when user click on update.
My problem is I want to check the value of my added field for ALL addresses listed in the left matrix (addresses list) but I don't know how to cause I can only get values of current address (I can get value of the address displayed but not thoses of the other address).
It does't seems to be a DbDatasource on CRD1 (address info table).
Is there someone who knows how thoses 2 matrix are managed ?
Thank you for your help

Hi Loic,
The contact is manage in the OCPR table.
You can control the value with the SBO_SP_TransactionNotification stored procedure. You find a lot of example in the forums.
Regards
Michael

Business Process thru Solution Manager

Hi All
Can anybody help me how to use Solution manager step by Step to map Business scenario.
It will be rewarded for early response.
Thanks & Regards
Vikram

HI,
Login to solution manager and goto SPRO.
There you should be able to see CRM business scenarios like e-commerce, service, channel management, CIC etc.
Start configuring individual activities of your scenario the way you do in your CRM SPRO.
Later transfer the transports to the next system in your land scape.
Please refer to the following link : http://help.sap.com/saphelp_crm50/helpdata/en/fc/5dc13690581b20e10000009b38f839/frameset.htm
Particularly look into the 'Configuration' link in the left navigation
<b>Do not forget to reward if it helps,</b>
Regards,
Paul Kondaveeti

Geocode Error while creating Business Partner in Audit Management

Hi All,
When I try to create business partner in PLMD_AUDIT and assign it to various partner roles like Auditor, Responsible person etc. I am getting error as " Geocoder SAP0: Country specification is (Customizing) " What should be done to avoid this error?
Found details in spro:
For "SAP0 Geocoder" there is no function module and destination assigned, Is it the cause of error? If it is the case then what should be assigned and Let me know the standard function module.
Regards,
Ram.

hi Keerthi,
553073 is the sap note for geocode error in country specification.
Regards,
Ram.
Edited by: Ramachandran Jayaraman on Jun 9, 2008 3:18 PM

How to delete Business partner in solution manger.

hi friends
I have two business partner BP1 & BP 2 assigned to xxx user(1 user).
but i want to delete the BP1 and it was not in use.
i have tried below transcation but i can not delete
Program : BUPA_TEST_DELETE
tcode : BUPA_DEL
> given BP1 and executed
> i am not able to delete and giving below message.
Delete Business Partners
No Business Partners Deleted
can any one knew how to delete
regards
raja

Hello Raja,
Have you checked and implemented the following notes (check they are correct for your release and sp level)
BUPA_DEL
SAP Notes:
893900 Report for inconsistencies b/w BUT000 & relationships
1383199 BUPA_DEL: Fatal error stops deletion process
1393366
1111635
Apoloigues for the list of notes but it seems any inconsistency in details for the business partner may block the deletion and there are many corrections linked to this transaction.
Hope the above help,
Paul

Import Project Structure (Business Blueprint) into Solution Manager

Hi,
we are searching for a way to import a project or process structure from external formats like MS Visio, BPML, XML into Solman SOLAR01.
I think there should be a possibility via XML.
Anybody knows how to import xml-files into SolMan Blueprint and which structure the file has ?
Thanks for any suggestions !
Steven

Hi Satish,
It would create a project that can be see in SOLAR_PROJECT_ADMIN, SOLAR01, SOLAR02 just like any other project.
The BPR is something entirely different. I think you meant Business Process Structure. Correct?
regards,
Jason

Business Partner in Solution Manager

Similar Messages

Maybe you are looking for