Business Partner : Mass upload

Hi Experts,
     I have to upload some15 million Business partner through BP transaction .
I want to know what will be the most suitable method to attain that.
Should I use BAPI, BDC , LSMW ??
I am not clear at all, what should be the most appropriate solution to this.
Please help me out.
Its very urgent.
Regards
Sourabh Verma

Hi,
You can use LSMW for this. Check transaction KCLJ and KCLL for resolving this issue too. For smaller number of data even ELM is very simple and effective upload method which provides facility to upload Marketing attributes data too.
External Data Transfer for Business Partner using KCLJ
The steps for business partner upload using the SAP standard program are as follows:
1.     The transaction code for the report is KCLJ.
2.     In the transfer program in kclj you have to give the sender structure name which is maintained in transaction KCLL.
3.     While creating this sender structure (KCLL) specify the Transfer type as ‘015’ for the business partner and then give the dictionary structure. This dictionary structure should contains the fields which are available in the structure ‘BUS_DI’
4.     After specifying the sender structure in KCLJ, specify the input and output file name, file system, editing mode and file type.
5.     Finally execute the report in test run mode to check the correctness of the data.
6.     If the test run is successful, run the report without test run to start the actual transfer.
7.     You can also define the transfer rules (KC7R) to assign the constant values while the transfer.
8.     The documentation is available in SPRO->Cross-Application components->SAP Business Partner->External Data Transfer.
With regards
Ambar Adhav

Similar Messages

  • How to create Business partner from uploaded file by Function module?

    Hi Experts,
    I have uploaded Business partner data from a file to server now from individual records I have to create Business partner and have to update the records in the tables. Means from on record i have to create one business partner in sap system.
    I have uploaded the records in the system and stored in a internal table.Now my task is to create business partner and have to update tables.
    I need a function module which create BP by each records uploaded and update the respective tables of BP and exports business partner ID.
    Please respond soon Its a requirement form the client.
    Prem.

    HI,
       You can use the bapi 'BAPI_BUPA_CREATE_FROM_DATA' to create a business partner .
    call function 'BAPI_BUPA_CREATE_FROM_DATA'
              exporting
                businesspartnerextern              = g_bpartner-partn
                partnercategory                    = partnercategory
                partnergroup                       = partnegroup
                centraldata                        = centraldata
                centraldataperson                  = centraldataperson
                centraldataorganization            = centraldataorganization
    *       CENTRALDATAGROUP                   =
                addressdata                        = addressdata
    *       DUPLICATE_MESSAGE_TYPE             =
    *         IMPORTING
    *            BUSINESSPARTNER                    = G_BPARTNER-BUSINESSPARTNER
             tables
                telefondata                        = telefondata
                faxdata                            = faxdata
                e_maildata                         = e_maildata
                return                             = return
    *       ADDRESSDUPLICATES                  =
                addressnotes                       = addressnotes.

  • Business Partner Mass creation

    Hi Experts
    We are in process of impementing Service Desk in Solution Manager 4.0. We did one to one user mapping. now we are about to creat Buisiness partner for 9950 users. when we got Transaction DSWP and Click on Edit and Create business Partner and when we select the system PS2 and clicking on drop down so that we can select some user it not let us to do. its saying that Time out. Please find the Log
    "Runtime Errors         TIME_OUT
    Date and Time          26.03.2008 20:11:19
    Short text
         Time limit exceeded.
    What happened?
         The program "DSWP_USER_PROPAGATION_TO_CRM" has exceeded the maximum permitted
          runtime without
         interruption and has therefore been terminated.
    What can you do?
         Note down which actions and inputs caused the error.
         To process the problem further, contact you SAP system
         administrator.
         Using Transaction ST22 for ABAP Dump Analysis, you can look
         at and manage termination messages, and you can also
         keep them for a long time.
    Error analysis
         After a specific time, the program is terminated to make the work area
         available to other users who may be waiting.
         This is to prevent a work area being blocked unnecessarily long by, for
         example:
         - Endless loops (DO, WHILE, ...),"
    Please tell us there is any other alternative to create mass business partners
    Points will be reward for helpful answer
    Thank you
    Bhaskar

    Hi,
    Please ask your basis team to change the instance profile transaction RZ10 extended maintenance change the parameter rdisp/max_wprun_time to higher value. The value unit is in seconds. Considering the number of user entries, this requires to be increased. No other way out.
    Please keep in mind, you have to restart the instance.
    This will solve your problem. Feel free to revert back.
    --Ragu

  • DTW Problem - Business Partner Upload

    HI everyone,
    I have a question regarding the upload of business partner in the DTW. I am using two templates the Business Partner and the Business Partner Address. After the upload process, only the first record has been successfully uploaded according to the LOG File and the succeeding record has an error.
    "An account with the same code already exists.(OCRD.Cardcode). '200002'Application defined or object defined error 65171".
    But when I look into the database no record has been added. I see to it that the Test Run box is also unchecked.
    What seems to be the problem?
    Thanks in advance..
    Malu

    Hi Gordon,
    Here's the sample data that we used during upload. Only the first record has been uploaded successfully according to the Log File but when we try to see the database, there was no data uploaded even if we unchecked the Test Run.
    Business Partner Template
    cardcode = 200000
    cardname = SMC-CKAG
    cardtype = cCustomer
    city = Parañaque, MMnla
    country = PH
    debitoraccount = 140000
    federaltaxid =  000-000-034-000
    groupcode = 100
    vatliable = vExempted
    Business Partner Address Template
    addressname = 2000000 - SMC-CKAG
    city = Parañaque, MMnla
    country = PH
    street = jardine davis cpd. km14 west serv
    Thanks in advance
    Malu

  • Mass Update of Business Partner Data in CRM

    Hi,
    I would like to know how I can perform a mass update of business partner data in CRM and then have this replicated into R/3.
    I have found notes 802804, 876602, 859632 but these only apply to CRM 5.0 and we are currently working on CRM 4.0.  Does anyone know of anything similar which exists in CRM 4.0?
    I have checked other posts and found help files links like the one below but is this only on CRM 5.0?  (http://help.sap.com/saphelp_crm50/helpdata/en/3c/9b56fae6c7424cafcdf17370399812/frameset.htm )
    Has anyone used the tx. MASS in CRM?
    Also our volume update levels is as high as 300,000 record and updating in CRM and replicating into R/3 through the middleware is causing performance problems.
    Does anyone have any tips on the best approach for this?  Many thanks.
    Regards
    JoJo

    Mass not available in 4.0, could write your own LSMW routine but you still will create bdocs for updates so not sure how that will improve your performance.

  • LSMW to upload Business Partner through IDOC

    Hello,
    I have requirement to upload Business partner  through IDOC. I am using below message type and IDOC type.
    1:- Message Type :- CRMXIF_PARTNER_SAVE_M
    2:- Basic Type :- CRMXIF_PARTNER_SAVE_M02
    Could you please tell me what configuration I need to do for this? Like creating partner profile, port etc
    Also I need to extend this IDOC segment to take care of my Z fields.
    After extending the IDOC segment do I need to write code in order to update this Z filed or it will be take care and also how to extend existing IDOC.
    If any one have has done this before then please share the logic.
    Kindly help.
    Regards
    Sachin

    Hi,
    Try LSMW with the IDOC method.
    Message type: BUPAFS_FS_CREATE_FRM_DATA2
    Basic type: BUPAFS_FS_CREATE_FRM_DATA201
    You will need to setting for IDOC: port, partner type, etc.
    Manish

  • How To upload business partner into sap crm using xif Adapter by XML File

    HI Guru's,
                 I got Requirement to upload the business partner information into sap crm system using xif adapters from xml file , please give  imformation how can achive this .
    Regards,
    Naveen Kumar MS

    Dear Naveen,
    please see the information given in note 448742 General notes on CRM external interfaces!
    Hope you can find the information!
    Regards, Gerhard

  • Upload LSMW for Grant Master and Business Partner

    Hi,
    Does anyone have LSMW' for uploading business partners and Grants
    A basic one can be shared. I will build up on that in terms of adding fields etc...
    Regards
    Anish

    Hi,
    As both the Grant master and the business partner have tables in several screens, using LSMW is not recommended.
    For the grant master record I'd use BAPI_0035_CREATE - Works better and faster.
    LSMW cannot support complicated scenarios, such as adding an alternating number of sponsored classes per grant (for example - one grant has 3 classes and another has 4 classes). The BAPI can solve such problems.
    Best regards,
    Shahaf Yaari

  • Uploading Business Partner Opening Balances

    Hi
        All
               I want upload business partner opening balance by DTW or Import data is it possiable????
    Thanks & Regards
    Amit

    BEST PRACTICE:
    Import all the open documents with Service Invoices/Credit Memos, with the same document number and date than in the legacy system. It does not matter what the client says - they ALWAYS have issues afterwards.
    In this case DTW is the best option.
    Kind regards
    Carin
    Edited by: Carin Botha on Aug 17, 2010 3:05 PM

  • Pgm needed: Mass upload of partner profiles

    hi.
    please give me the name of the program for the mass upload of Partner Profs in EDI

    Hi Alok,
    Did you get the program name or any other solution? I too have the same requirement.
    Thanks!

  • ISU Business Partner Master data Upload using BAPI?

    Hi Experts,
    I used BAPI "BAPI_ISUPARTNER_CREATEFROMDATA" to upload ISU Business Partner master data.
    This BPAI is not uploading the following topics:
    1. Communication Address like Telephone,extension, email and etc., are not uploading.
    2. Middle name, nick name etc, the field which are under the Expand symbol not uploading.
    3. Reference customer also not uploading.
    strctures what I used are:
    for communication : TELEFONDATANONADDRESS, E_MAILDATANONADDRESS
    general data : BAPIISUBPD
    Reference customer: BAPIBPPARA-MUSTER_KUN
    I am passing all the data but not uploading some of the field values (above) using that BAPI.
    Could you please let me know the solution?
    Please help me out!
    Thanks in advance.
    sekhar

    Sekhar:
    Try with below details:
    for communication : BAPIISUBPA & BAPIISUBPAX.
    general data : BAPIISUBPD & BAPIISUBPDX
    Reference customer: BAPIISUBPA-BP_EXT & BAPIISUBPDX-BP_EXT
    Thanks,
    Murali.

  • Mass deletion of users business partner and position in SRM 4.0

    Hi Experts,
    We have a requirement of deleting 1000 +  users who are locked in ECC from SRM Organization structure. For which I got the list of users who are under u201Cdeleteu201D group from table USR02. Then I found the business partner number of those users from table BUT000. Once I got the BP number I can do mass deletion of the BPs by using BUPA_DEL.
    Now, my problem is I need to mass delete the position of the users as well. If I delete it one user at a time I can go to PPOMA_BBP and select the position and delete the object.  Can anyone please help me on how can I do mass deletion of the positions of those users, its pretty urgent. I am waiting for your valuable suggestions.
    Thanks
    Div
    Edited by: Tridib Das on Sep 29, 2011 4:15 PM

    Hi Velu,
    To find the business partner or the central person id we can' go to table HRP1001 and get the central person id / business partner by inputing the parameters in the selection field as :
    Object type : CP / BP
    Rel. Obj.type: US
    ID rel. object : Give the id of the user
    this shows the object id . Anyway thanks for your help .
    Cheers
    Div

  • Facing error while uploading Business partner supplier data in MDG

    Hi Experts,
    I am trying to upload Business partner data for supplier in MDG.
    I am following the document: Installing, Configuring, and Using the Excel Up... | SCN
    The system gives an error that : Business partner does not exists. It is not able to create a new BP.
    Please check the error log in the attachment.
    However if I give any existing BP number under the Vendor number in the csv file, this updates the BP successfully.
    Please help me if you have faced similar situation.
    Thanks &regards
    Ashwini

    Hi Paul,
    I was logged on as manager (superuser). So that was not the problem. But your advice to check account settings help me to find the answer:
    In Administration -> Setup -> Financials -> G/L Account Determination in TAB Sales/General the field "Permit Change of Control Accounts" was not filled.
    After filling the field we can change country again.
    So thank you for your helpful answer.
    regards,
    Daniel

  • Writing an Upload Program for Business Partner, its address and Attributes

    Hi SAP Gurus,
    I am in process of writing a tech design and code for an upload program which requires uploading a list of million Business Partners, its address (primarily Zip Code) and a list of Marketing Attributes of those Business Partners. The data will come in a .csv extract which will contain the BP Name, Zip Code, Marketing Attributes (X, Y, Z, etc) and then through this upload we will be creating BPs in the system and then updating its address and then Marketing Attributes.
    The approach that I have chosen is -
    1) Select the file from the presentation server using the class/method CL_GUI_FRONTEND_SERVICES /GUI_UPLOAD FM
    2) Call the FM TEXT_CONVERT_XLS_TO_SAP to transfer the content of the MS Excel file to an internal table for further processing.
    3) Call the FM - BAPI_BUPA_CREATE_FROM_DATA and pass the necessary parameters to upload/create the Business Partner and then call the FM BAPI_TRANSACTION_COMMIT to ensure the upload is complete.
    4) Once the upload of BP is complete, then upload the address (Zip Code) data through the FM - BAPI_BUPA_ADDRESS_ADD and then call the FM BAPI_TRANSACTION_COMMIT to ensure the address upload is complete.
    5) Post the upload of BP and address data, call the FM CRM_MKTBP_PROCESS_BP_LIST to upload the Marketing Attributes of the Business Partners to the relevant tables and then again call the BAPI_TRANSACTION_COMMIT.
    I just wanted to check if the above steps are correct or am I missing something important there??
    Would appreciate expert opinion/guidance on this.
    There is a time constraint on completing this; hence would appreciate a quick and reliable response to it.
    BR,
    Ravi

    Hi Clemens,
    Thanks for your input.
    So, just wanted to re-iterate the points you highlighted -
    1) Instead of presentation server, you want the file to be read from application server and schedule this program as a background job? Am I following you correctly?
    2) Link the address upload along with the BP upload only (at the same time instead of separately) to ease of double processing through one FM - BAPI_BUPA_CREATE_FROM_DATA
    3) Calling BAPI_TRANSACTION_COMMIT every 1000 BPs or so for faster processing.
    However, you did not mention anything about attribute upload. Is that approach fine? or do I need to include anything more there?
    Please confirm and then I can close this question.
    BR,
    Ravi

  • Upload Business Partner Attachments

    Hi Experts,
            I am working in CRM7.0, I want know the transaction code to upload attachments for Business Partner. And i also want to know corresponding tables being used to store it. Please suggest some solution to read the attachments of the Business Partner.
    Please help me on this.
    Thanks and Regards,
    Peter Dinesh.

    Hi Peter,
    You can upload documents in trx. BP tab documents.
    Check this thread [;
    Best regards,
    Caíque Escaler

Maybe you are looking for

  • Error "424 Object Required" when opening journal report using HFM 11.1.2.1

    Hi experts, I've installed EPM 11.1.2.1 along with Hyperion Financial Management and Financial Reporting on an virtual machine (OS is windows server 2008), when I logon to workspace and tried to open an journal report in HFM-Format, appears error mes

  • How to enable purchasing tab in BOM, while defining bom for a item

    dear gurus, while defining a bom for a item, there ae various tabs like main, effectivity, OM etc. among that purchasing tab is in disabled state. how to enable that. pls provide setup and whats actual use of that. waiting fr reply.

  • Internet Explorer 12 support OS.

    I heard about the new ie12 with chrome/Firefox design :) but i hope ie12 will  be support on Vista,7 and 8.1 That would be good for reputation of internet explorer.

  • Organizing package building wiki entries

    Right now we have three separate wiki entries that describe the package building in Arch: http://wiki.archlinux.org/index.php/Arc - _Standards http://wiki.archlinux.org/index.php/The - guidelines http://wiki.archlinux.org/index.php/ABS - _Explained I

  • Help With String parsing

    Hey guys, I need some help with String Parsing. i hope experts here will help me. i'm reading a text file and getting data as String in this format *ABR, PAT MSSA        2009       7001    B   ABC       Y *VBR, SAT ZSSA        2008       5001    A