Business Partner Names

Good day! Is there a way to use the Business Partners Names as parameter fields? Like when you want to search data about a certain business partner, you'll just type in his/her name to gather the data. I was only able to do that using BP Codes.
Thank you.

Hi
If your business partner name is part of your database field data then you can very well create a prarameter and define default values of your Business Partners.
Also you need to filter the data through Record Selection to get Business Partner wise data.
Thanks,
Sastry

Similar Messages

No Business Partner name in the general note of a DSWP-issue

End user has been created within a CUA-sytem and distributed to the SSM-system. Subsequently the Business Partner BP has been generated in the SSM-system succesfully with the tcode bp_gen. The BP has been attached in the organization model succesfully using tcode pposa_crm. However, the Holder name does not appear at the left lower Holder column. After some investigation it appears that the fields HRP1000-SHORT and HRP1000-STEXT of the Central Person are not filled. Hence, no Business Partner name appears in the general note of DSWP-issue and therefore different to trace who has done what. What can be the cause of this issue?

Just for the record...
It appears that in some cases the Title-field was not filled in the CUA-system. Therefore this field was not transferred to the SAP Solution Manager system. The problem has been solved by entering a value in the 'Title'-field of the Business Partner [/nbp] - the Holder name in the organisational unit appears again.

MASS change of the business partner name

Hi All,
I have an immediate requirement to do a mass change of the business partner names. I used the Tcode MASS but not sure of the procedure. Can anyone kindly guide me how to go about processing the mass change?
Thanks,
Venkat.

Hello Venkat,
Have a look at SAP Note 802804. This should help.

How to get business partner name from sap user

Hello,
We want to get in the code the business partner name from sap user.
What function modules should we use to perform it?
Thanks in advance,
Sergey

HI,
You can use the FM:CRM_CENTRALPERSON_GET
pass the input parameter IV_USERNAME as the user name
You can get the result in the export parameter EV_NAME as user's first name last name
regards,
PP

Problem with display of Chinese, Japanese, and Korean business partner name

Hi All,
I'm trying to understand how to get GTS to properly display the names of the business partners that are in Chinese, Japanese, or Korean.
I have set my SAP gui localization as follows:
- Select the Customize Local Layout, then Options, then the |18N tab,
and check the Activate Multibyte Function box
- Select the Customize Local Layout, then Character Set and check
Unicode and Simplified Chinese
In the source R/3 system for these partners, if I set my localization to the right language, the business partner's name and address would be displayed correctly in the C/J/K character sets when I select the appropriate version in International Version of the address.
However, in GTS these names/addresses would just appear as nonsensical characters (like "·ÉÀûÆÖÕÕÃ÷µç×Ó£¨ÉÏº££©ÓÐÏÞ¹«Ë¾").
For example, if I do a look up of a known Chinese BP by number, in the seach results window the Description field of that BP would just be garbage, but if I put the cursor over the Description field, then the correct Chinese display (matching what is in R/3) would appear for as long as the cursor is over that field. This indicates that the data was transferred correctly from R/3 to GTS, but some how the display does not default to the right character set.
If I select that record, the resulting detailed display would also have garbage as the Name and Address. However, here putting the cursor over the fields still do not bring up the correct character displays, and I have found no way to get the correct displays to appear.
Does any one know of a way to get the displays to show correctly in GTS?
And can anyone explain why putting the cursor over the Description (in the BP search results window) would let the correct display pop up?
Greatly appreciate any insight anyone can provide.
Thanks,
Rex

Hi Rex - As per message - this looks to be an issue for BC-I18-UNI and not the GTS application:
For general information purposes - last response from BC-I18-UNI development via oss message:
"However, from readind the message, I believe I understood the reason for
the described effect. I assume GGT is a non-Unicode system? If yes, this
is my idea:
The data stored in the BP tables, e.g. for number 2555442 have been
entred manually, probably within a session using English as logon
language. In this case the data are stored with a Latin-1 codepage. This
means the stored data are actually Latin-1 data, not Chinese. By
switching the font at front-end side to Chinese, the characters appear
as correct Chinese, although they are still Latin-1.
It is possible that different GUI components show different effects in
this context, as the internal font switching mechanisms behave a bit
different in different components, e.g. control based components are
different from normal Dynpro-based fields.
To have correct Chinese data, you need to logon with language Chinese.
This holds for all non-Unicode systems. On Unicode systems, the logon
language is arbitrary."

Business Partner Name missing from ACH Payment File

We are trying to send a payment on a loan to a business partner via an ACH file. When the file is created, the payee name is missing from the ACH File. It runs perfectly in our developement client, but not in production. I can not seem to find any differences between the the two clients. Can someone point me in a direction that I can look to get the Payee into the ACH File?

Hello Wayne,
What type of payment files do you use and for which country?
Regards,
Endre

S_ALR_87012357 Business Partner Name field is blank

Dear All
While running this report i am getting values and tax related details correctly. In customer and vendor field i am getting their number. But i am not getting description of the same.i.e the field business partner is blank.
Kindly guide me to get data for that field.
Thanks
Shobana

Dear Shobana,
how to get customer and vendor fields in report S_ALR_87012357 .
While running this report i am not getting customer and vendor fields iself.
Kindly guide me to get data for that field.
Thanks
Shobana

Layout EL 31 : i need to add the business partner name

Dear Experts ,
I need to change the layout for all users by adding the field "business partner".
I can't change and deflag the field "user specific" when i'm saving the variant and the goal is to flagg only the "default setting".
Thanks in advance for your help

Dear experts,
I'm dealing with the note 526696 and i have some questions :
- where i can found the switch ISU_LOC_CI_EHP5?
- where i can found the business function ISU_LOC_CI_2?
I need these infromation for the table TE410S because nothing concerning the field EL31_DEFAULT_LAY is stored.
Best regards,

Not all fields for Business partner are exported

Hello,
I am exporting Business partner data from CRM to another system, through XIF. I get on target system XML file with Business partner data. But I have only standart fields. I can't get fields, which was created my company for own use.
For example, for Business partner I have Business Agreement, but after export to XML, I have no Business agreement data in another system. But I have standart data, for example, Business partner Name, ID, ets.
Anybody know what I can do to export all the fields for Business partner? Some transaction or somthing else? Where can I customize output XML with Business partner data?
Best regarda,
Alexander.

Hi,
You have the right observation. There is no mandatory fields for BP. It means you can update any single field against CardCode. CardCode is the only mandatory field which is the only primary key must be unique.
Thanks,
Gordon

JCo : CRM : Business Partner : BAPI

Dear All,
We are in need of knowing the following info for the Business Partner, by providing the Business Partner ID we need this info "Business Partner Name", "Partner Type", "Name of Creator" .
Please let us know
what is BAPI ?
For verifying this what is the tCode for same from SAP GUI?
It would great if you could help us by providing the JCo Sample code to achieve this.
We also tried it from the following link
http://abap.wikiprog.com/wiki/Category:BAPI_BusinessPartner
Please kindly help us to resolve the issue.
regds
Kicha

Hi Easwar Ram
Thanks for your kind reply, it really helped me.
Please let me know if there is any JCo sample code to access the Table and it's data.
When I tried
JCO.Function function = getFunction("RFC_READ_TABLE");
JCO.ParameterList listParams = function.getImportParameterList();
listParams.setValue("BUT000", "QUERY_TABLE");
listParams.setValue(5, "ROWCOUNT");
JCO.Table tableList = function.getTableParameterList().getTable("OPTIONS"); //also FIELDS
but I am getting the following exception
com.sap.mw.jco.JCO$AbapException: (126) DATA_BUFFER_EXCEEDED: Selected fields do not fit into structure DATA
        at com.sap.mw.jco.JCO$Function.getException(JCO.java:14371)
        at com.sap.mw.jco.JCO$Client.execute(JCO.java:2678)
        at JcoBpTest.main(JcoBpTest.java:24)
Is this a right way using it if not what should be ? And when do we directly make use of the Table like BUT000
Please let us know you input.
Regds
Kicha

Name 1 and Name 2 fields of Business Partner - changes get set back

Dear Experts,
in SRM 7.0 CS, i am facing the following problem w.r.t Messages in the shopping cart.
It is known system behaviour, that in case the contend of the fields Name 1 or Name 2 of the Plant Business Partner is longer than 35 digits, than a (warning) message is displayed in the shopping cart with the content like "Name 2 field, limited amount of digts can be displayed..."
I have shortened the content of the field Name 2 of the BP of my plant, but it seems that after some time the old contend has been written back into the field for some reason.
Has anyone experienced a similar problem? What could be the cause? Is it recomandable to use the "Influence Message Control" configuration for this message, in order to hide it completely?...or should the "Message Control By User" configuration be used?
Thank you very much in advance for your support.

Dear All,
i seem to have been able to solve the problem by not only making the change on the BP, but also respectively changing the content in the respective fields in PPOMA (reduce the length of the content in the fields Name1 and Name2 of the location).
Thank you.

FM for assign employee user name to Business partner (employee) in BP t.cod

Dear alll
I need fm / bapi for assigning employee (user name) to business partner in identification tcode in BP tcode. Any one help me?

Hi Saumya Govil
I have used
1. BP_BUPA_GET_HROBJECT to get the person number based on PARTNER_GUID.
2. pass this person number to FM BP_CENTRALPERSON_ASSIGN_USER to assign user ID.
Instead of the creating new central personal number i have used above BP_BUPA_GET_HROBJECT fm.
Thanks for your quick reply.

Tables to link Business Partner number and User Name

Hello SAP Experts,
I'm having a hard time looking for the relationship tables that could link the Business Partner numbers with the user name of a user. I have tried to link the BUT* tables, the USR21 table, and several HRP* tables and I can't seem to find a link. For the table BUT000, the field XUBNAME which is suppose to contain the user names of the users are left blank for some reason.
I just want to ask if there is any other table relationships I can check so I can retrieve the User name of a user using his/her BP number or vice versa. Thank you in advance!
Regards,
Romeo

hi,
i am not sure about tables but you can use FM BP_CENTRALPERSON_GET to get the user name from BP and vice versa. Get the BP guid from BUT000 table and give that to the FM
thanks,
sankar.

Not able view full name of external business partner in Lync online meeting.

Hi
I am not able view full name of external business partner in Lync online meeting.it is showing only First Letter and position title.
example( D...Global Team Lead)
It is difficult to find the names please help me, what will be the problem.
Thanks...

Hi,
Did the issue happen for one partner or for multiple partners?
Did the issue happen for single online meeting with external business partner or for multiple online meetings?
Please update to the latest version for Lync server and Lync client and then test again.
In my Lync environment, on a Lync online meeting which included external federation users, I can see the full name of them.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

A business partner with this name already exists - message 3501-1

My client can't create a new account, the company is using a chart of account with segmentation. The message error is : "A business partner with this name already exists - choose a differetn name for the account. [Message 3501-1]"
We are using SAP 2007A PL42 with SQL 2005
Does somedbody have the same problem?

Hi
Please answer couple of these question
Are you trying to create a new Business Partner Master Data ? Or Are you trying to create a new G/L Account in Finance module .
Have you had that business partner before and was deleted ?
Hope this will help to narrow down
Bishal

Business Partner Names

Similar Messages

Maybe you are looking for