Business partner not created when User is intergrated in SRM org Structure

Hi SRM gurus,
A new users  in integrated into the SRM org structure thro Z tcode ,business partner is not created.
the user is not able to create shopping cart.
When we try to check for t.code:BBP_BP_OM_INTEGRATE we are getting this error"
Connection of object us XXXXXX to object u2018CPu2019 is not unique"
how to resolve this error.
Regards
G.Ganesh kumar

Hi  all,
1) I  have checked the SLG1 -No error log is found
2) In the basic tab there is no details to enter.
I am getting this error"Missing Authorisation : info type 1001 ,object type BP,Subtype A207".
since it is Production system -can we run run PFAL directly
G.Ganesh Kumar

Similar Messages

  • CUSTOMER_REL - Business partner not created; duplicate check on address

    Hello Colleagues
    I have a problem during CUSTOMER_REL replication from ERP to CRM.
    In r3am1 object looks fine but in some BDoc following error appears:
    Assignment person - address exists already
    Message no. AM038
    and the Business Partner for Contact Person is not created.
    We are on:
    SAP_ABA     701     0005     SAPKA70105     Cross-Application Component
    SAP_BASIS     701     0005     SAPKB70105     SAP Basis Component
    PI_BASIS     701     0005     SAPK-70105INPIBASIS     Basis Plug-In
    ST-PI     2008_1_700     0001     SAPKITLRD1          SAP Solution Tools Plug-In
    SAP_BS_FND701     0005     SAPK-70105INSAPBSFND     SAP Business Suite Foundation
    SAP_BW     701     0005     SAPKW70105     SAP Business Warehouse
    SAP_AP     700     0018     SAPKNA7018     SAP Application Platform
    WEBCUIF     00     0005     SAPK-70005INWEBCUIF     SAP WEBCUIF 700
    BBPCRM     700     0005     SAPKU70005     BBPCRM
    BP-CRM70     700V1     0000               SAP Best Practices for CRM 7.0
    BP-INSTASS     600V7     0000               SAP Best Practices Solution Builder
    ST-A/PI     01L_CRM5700000               Application Servicetools for CRM 500 51
    And have already applied
    1394635
    1396910
    1397895
    1410788
    1438046
    But it is seems problem lies on SAP_ABA as I have found note
    1092089 - Business partner not created; duplicate check on address
    which is valid for different BP role and
    SAP_ABA 700
    SAP_ABA 710 but not for our 701
    Have you ever seen similar issue?
    Thanks in advance
    Michal

    Hi Naresh,
    Thanks for reply. Correction instructions from this note refer to METHOD MODIFY_CONP_ADDRES which doesn't exist in crm7.0.
    I can see in CRM that contact person is replicated and is present in BUT000 but table BUT052 is empty for this contact.
    What is more we have implemented in our CRM note 564538  To change Contact Persons grouping replicated from ECC to CRM.
    But also have: Note 757955 - Incompatible change concerning CRMC_BUT_CALL_FU.
    We checked as well
    Note 609766 - Correction of BP GUIDS in CRMM_BUT_CUSTNO, BUT000, CRMKUNNR
    Note 836353 and run reports to find inconsistencies in tables BUT052, BUT051, ADCP and ADRVP. However no inconsistencies were found.
    Thanks in advance if you have any other idea.
    Cheers,
    Michal

  • Business Partner not created in PPOMA_BBP

    Hi this is for a new implementation where we are trying to Setup IDES for the initial training... The problem is - system is not showing any BP for the objects in the Org Structure. Tried running BBP_BP_OM_INTEGRATE too but no results. There is no descrepancy with the Area Code or Postal Code as well...
    Can anyone pls suggest what else to check.
    Regards
    --Vikas

    Hi,
    Please enter only these field in the ADDRESS TAB of SRM Org Structure, for getting BP.
    1) Sub Type.
    2) City.
    3) Country.
    4) Region.
    It will work.
    All the best.
    Please award the points if it helps.
    BR,
    Vijay Mittal

  • Business partner not created in SRM in  HR-SRM  integration

    Hi All,
    We are setting up SRM HR integration set up with ALE idocs message type.
    I ve done configuration as per guide available in SAP.Setting up parnter profiles,maintaining message types in both the systems ,mainyaining entries in tavle T77S0 for HRALX , maintaining filters in distribution model in BD64. When I start replicating the data using PFAL in R/3 ,the idocs triggered are green in both R/3 and SRM for org units ,Postions and also Persons.
    Still i dont see BP created for most of the employees.Only few are getting craeted.When I check the log in SLG1 it says Marital status could not be converted.
    I maintained all entries as per the entries available in R/3 in SPRO-Cross application components- SAP Business Partner-Business partners-Natural Persons-Maintain Marital status . Still i rceive the same error in SLG1 and BP is not getting craeted with idoc in green in SRM.
    CAn any one please help.
    Thanks in advance,
    Sheetal

    Hi
    On SRM side using WE05 transaction see the failed IDOC's to get the complete details of the error. As you are saying that some of the users are successfully replicated issue may be on the ECC side HR info type relation ship missing. Ask your HR team to check the same.
    On ECC side check table HRP1001 to see the difference between the successully replcaited users and one which failed.
    with regards
    Manjunath

  • Business partner not created in FSCM

    Hi,
    I have a problem where in creating customer master data in FI creates a business partner in FSCM for all the payers except in the case when partner functions(sold-to, ship-to) on the sales area tab of the customer master record are populated. I do not know why this is the case - why would partner function fields on the customer master record break the automatic creation of business partner in FSCM?
    Helpful answers would be rewarded.

    Hi
    We dont have any problem by entering the Industry field in the customer master for the creation of the business parter for FSCM.   May be you need to check what are the parameters that will be passed on for creating a business partner from the customer master.
    Thanks
    Ashok

  • Business Partner not created

    I'm sending a message from XI to CRM using the proxy "ABABusinessPartnerIn".
    There are no error messages . However the Business Partner is not created.
    How do I troubleshoot this issue ?

    Manoj,
    In CRM execute SPROXY,  and select your interface.  Under menu item PROXY->Test Interface, you'll be able to execute the proxy interface in debug mode.  You'll need to download your message payload to test with.  Also, there's a how-to guide "How to debug XI applications" available on the SDN at this link https://www.sdn.sap.com/irj/sdn/howtoguides?rid=/webcontent/uuid/dd0326a7-0d01-0010-f690-b94802b06c8a. [original link is broken]
    Leo

  • How to check a list of users whether integrated to SRM Org Structure

    Dear SRM Gurus,
    I am using SRM 4.0 system with classic scenario.
    We are not using the HR system integration for org structure setup.
    I have a list of users to be checked, whether they are integrated to SRM Organization structure.
    Normally, I use the "Check Users" option under, Users_Gen tcode to check a single user.
    Is there any way to check multiple users(almost 300 users) at once.
    Any Table or function module is avalable?
    Thanks in advance.
    Loka

    Hello Loka,
    Run same transaction. When you are on screen "Object Synchronization and Repair", set "User" but do not populate any value, then execute.
    You will get all users: when user has a red icon in column 'Object links', this means he is not integrated in the organizational model.
    In same transaction, if you can also set "Branch from Organizational Unit" and "Users only". Here, you will get only users integrated into organizationl model.
    Regards.
    Laurent.

  • Business Partner not created via MDS_LOAD_COCKPIT

    Hi,
    I have a question. It seems to our customer are not being replicated when I run the Sync Cockpit.
    I have checked all config:
    Config for BP<-> Cust
    Number ranges, groupings, roles, PPO active, Cust integration etc. It all seems the same in the config client. We had some Master data in the config client and i tried it there and i works but in my unit testing client it seems not to work.
    I am not getting a message anymore in MDS_PPO2 so i am kinda lost.
    Any ideas where i can check. I looked on this forum and don't find a similar issue.
    Thanks,
    Richard

    hi
    i have a big problem during using mds_load_cockpit
    when i click on product category->material group and un select backround proccess and execute the transaction i have terminated in program
    Category               ABAP Programming Error
    Runtime Errors         MESSAGE_TYPE_X
    ABAP Program           SAPLMDS_LOAD_BRIDGES
    Application Component  AP-MD-BF-SYN
    Date and Time          10.06.2014 09:39:47
    Short text
         The current application triggered a termination with a short dump.
    What happened?
         The current application program detected a situation which really
         should not occur. Therefore, a termination with a short dump was
         triggered on purpose by the key word MESSAGE (type X).
    Error analysis
         Short text of error message:
         Long text of error message:
         Technical information about the message:
         Message class....... "MSI_PRODCAT_CUST"
         Number.............. 303
         Variable 1.......... 1
         Variable 2.......... 432339
         Variable 3.......... " "
         Variable 4.......... " "

  • BUT000 partner not created via function 'BAPI_BPCONSUMER_CREATE'

    Dear all,
    Hope you can help me. In a batch job we create business partners via function 'BAPI_BPCONSUMER_CREATE'. When the creation is succesfull the partner_number can be found in table BUT000. <u>Sometimes</u> however function 'BAPI_BPCONSUMER_CREATE' has been executed correctly (this means no errors/warnings in table 'ret') the partner_number is not present in the BUT000 table although the function 'BAPI_TRANSACTION_COMMIT' has been executed.
    When I check the BUT000 table afterwards there is a gap in the partner number numbering. You can see the abap code below.
    Has anyone seen this before? Thank you in advance for your help.
    With kind regards,
    Simon Tol, Bose IS
        CLEAR partner_number.
        CALL FUNCTION 'BAPI_BPCONSUMER_CREATE'
          EXPORTING
            partner_group               = 'Z001'
            partner_category            = '1'
            partner_central_data        = bupa_central
            central_data_person         = cpperson
            partner_addr                = cpaddress
            duplicate_message_type_addr = 'S'
          IMPORTING
            businesspartner             = partner_number
          TABLES
            partner_tel_addr            = cpadtel
            partner_fax_addr            = cpadfax
            partner_email_addr          = cpadsmtp
            return                      = ret.
        LOOP AT ret WHERE type = 'E' OR type = 'A'.
          PERFORM make_message USING 'I' ret-id ret-number ret-message_v1 ret-message_v2
                                                                 ret-message_v3 ret-message_v4.
          PERFORM make_message USING 'E' '00' '208' 'Error: Prospect not created' '' '' ''.
        ENDLOOP.
        IF sy-subrc <> 0.
          CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
            EXPORTING
              wait = 'X'.
          IF send_to_r3 IS INITIAL.
            CONCATENATE 'Prospect' partner_number 'created.' INTO msg
                                                   SEPARATED BY space.
          ELSE.
            CONCATENATE 'Consumer' partner_number 'created.' INTO msg
                                             SEPARATED BY space.
          ENDIF.
          PERFORM make_message USING 'S' '00' '208' msg '' '' ''.
          CLEAR but000.
          SELECT SINGLE * FROM but000 WHERE partner = partner_number.
          IF sy-subrc <> 0.
            CONCATENATE 'Error: Partner'                   
                        partner_number
                        'Partner not created, date/time'
                        sy-datum
                        sy-uzeit
                        INTO msg
            SEPARATED BY space.
            PERFORM make_message USING 'E' '00' '208' msg '' '' ''.
            PERFORM make_message USING 'E' '00' '208' 'Error: Partner not created' '' '' ''.
            gv_partner =  partner_number.
            return.
          ENDIF.

    Thank you very much for the helpful answers.
    The problem  is solved.
    'BAPI_EQUI_CREATE' needs a commit to make an entry in the Database.
    CALL FUNCTION 'BAPI_EQUI_CREATE'
    EXPORTING
      external_number    = equipmentnummer
      data_general       = data_general1
      data_specific      = data_specific1
    DATA_FLEET         = data_fleet1
    VALID_DATE         = valid_date1
      data_install       = data_install1
    IMPORTING
      equipment         = equipment1
      data_general_exp  = data_general_exp1
    data_specific_exp = data_specific_exp1
    data_fleet_exp    = data_fleet_exp1
    return            = return1 .
    DATA: ld_wait      LIKE  bapita-wait.             
    ld_wait = 'X' .
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
        wait = ld_wait.

  • There is no valid business partner assigned to your user

    Hello,
    I have trouble managing change requests and would greatly appreciate some help.
    I am able to create an urgent correction to later authorize it and set the automatically created request to "In Development" status, but after this I get the following message and can not continue to the Created status.
    Type: Stop sign
    Reference object: Header Data
    Message text: There is no valid business partner assigned to your user
    I would also like to know where (transaction) and how to eliminate change requests.
    My user was assigned to me with the following roles:
    SAP_CM_REQUESTER
    SAP_CM_CHANGE_MANAGER
    SAP_CM_DEVELOPER_COMP
    SAP_CM_TESTER_COMP
    SAP_CM_OPERATOR_COMP
    SAP_CM_ADMINISTRATOR_COMP
    Do I need any additional roles? Must I assign a BP to my user? If so, where (transaction) and how (will I need aditional priveleges)?
    Regards,
    Henry

    Thank you Arun,
    Yes, I am referring to SOLMAN. Where must I do this, what transaction? I tried BP transaction but it only permits me to establish relations between BP's and not with users. I am sorry, but I am fairly new to SOLMAN and need a little more direction. Maybe if you have a good SOLMAN guide for beginners, I would deeply appreciate you sharing it with me.
    email:[email protected]
    Thank you again Arun.
    regards,
    Henry

  • Getting a "Business partner not found with partner function type requester"

    Hi There,
    After I add a text item to the shopping cart using the SHOP t-code, I get a message "Business partner not found with partner function type requester" What could be causing this and how can I rectify this problem.
    Please help mas this is an urgent issue.
    Thanks,
    Grace

    Hi Grace,
    First check :
    1- transaction : CRM_OM_BP_INTEGRATE
    select org structure where your user is and check that you have green lights (no missing address....)
    2- Run transaction USERS_GEN
    Select check user
    Is everything correct or does the user need to be repaired ?
    Kind regards,
    Yann

  • How to link the Business Partner with the SAP User ID.

    Hi,
    We are working on a scenario wherein the resources are created as Business Partners in R/3.
    now How to link the Business Partner with the SAP User ID.

    HI AP,
    Maintain the business partner in role Internet User - BUP005.
    Now assign the existing user to this BP .(you can make this assignment in tab "internet user'. Just enter the user name in the field User and save).
    You can now see the link in table HRP1001.
    Cheers,
    Rishu.

  • 'Business Partner Assigned to the User' Access Sequence don't work

    Hello.
    I use access sequence 0008 (Business Partner Assigned to the User) in my Partner determination procedure. But it doesn't work. Corresponding Partner field in service document is empty. But I need that BP linked with logon user filled it.
    I've made the same settings on another incstanse of SM and it's work. And what the difference between I don't understand.
    Edited by: Dmitry Udot on Feb 13, 2011 2:31 AM

    Sorry, but I don't quite get it.  My purpose is to have 9 policies all working all the time (they did at in one version of firmware).  I don't care about time entries for these.  All 9 policies are full of keywords and websites to block webpages related to porn to one degree or another.  The 10th policy is time-based to prevent internet access altogether for one or two computers through the wee hours of the morning.  This, all in leu of having no parental controls.
    Again, it would help if there was more detailed documentation on how this all works.  This is the first I am aware that time settings in one policy could affect or impede the operation of other policies.  How am I supposed to know this?
    In any case, I appreciate your assistance and looking into this for me.  But can you now tell me how to make it work so the policies will work as I want - the first 9 around the clock all the time, and the 10th one only from 1:30 am to 8:00 am (every day).  Please instruct me on how I am supposed to configure this to work, and what specific settings I am supposed to enter... if it is even possible.  Or is there another way of accomplishing this on my WRT54G (Rev. 2) product?  Thanks.
    Perry

  • A passcode was not created when ipad mini 3 was first set up however it is now locked and asking for a passcode. What to do?

    A passcode was not created when we first set up my son's ipad mini 3 however the ipad is now locked for some reason and asking for a passcode.  What do we do?

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    A
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    7. iOS - Unable to update or restore
    Forgotten Restrictions Passcode Help
                iPad,iPod,iPod Touch Recovery Mode
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
    Also, see iTunes- Restoring iOS software.

  • HTTP logs not created when using software load balancer

    This is my setup:
    1. I have a server running a software load balancer - call it A
    2. There are two servers clustered under A - call it X and Y
    3. I am able to access the application deployed on X and Y through A.
    Fail-over also works. Shutting down X when the application is up and running routes the requests to Y and vice-versa. All is well until this point.
    Problem is:
    Let us take server X.
    $ORACLE_HOME/Apache/Apache/logs does not have an access log in it. (It
    however has an error log.)
    Access logs are not created when accessing the servers in the cluster (X and Y) through the load balancer URL.
    However, when accessing the individual servers in the cluster (with their URLs), access logs are created.
    Specifics on the setup:
    1. A, X, Y - all three are OAS 10.1.3.2
    2. All three are deployed on individual server machines
    3. All three servers have one OC4J instance each running in them
    4. The software load balancer used is from WebLogic 8.1sp5 - basically to create a *.war file that has the details of X and Y (servers in the cluster)
    5. This *.war file is deployed on A
    6. Server A, the one that has the software load balancer, DOES NOT have AS control. One of the other servers in the cluster does.
    Has anybody encountered this problem before? Or is there anything wrong
    with the setup? What is the resolution for the same?
    Any help is greatly appreciated.
    Thank you.

    Thank you, Jacco. You are right in saying that the software load balancer does not route the request to Apache and hence the logs are not created.
    While the logs are not critical to the component we are working on, was just wondering why they were not being created.
    As regards your comment on FastCGI, there is a FastCGI directory created under $ORACLE_HOME/Apache/Apache/logs - but there is nothing in it. Neither do the error logs have any information pertaining to FastCGI.
    Anyway, I am not going to worry about this issue anymore - may be sometime in the future will try to use a different software load balancer and see if it makes any difference.

Maybe you are looking for

  • I can't type on message boards in text box!!

    I can't type in message boards or forums text boxes. I have a macbook air, using safari, have disable pop up blocker. What do I do!??!

  • IDOC to Flatfile

    Hello expert! I have created a IDOC and now i want to pump the data from my IDOC to flat file! Is this possible? If Yes, please let me know how to do this and mail me to       [email protected] Thanks in Advance, MLN

  • Why does WL7 restrict security deployment descriptors?

    Hi, WL7 has nice role based features - I can create a role based on username/groupname and time. However, when you define a role for a web application say, in a BEA specific file weblogic.xml, then I can only do this: <security-role-assignment> <role

  • Check Printing Smartform

    Hi All, Is there any standard smartform available for Check Printing. Can we create a new smartform and conigure it in f110 transaction?? Any help on this will be appreciated. Thanks, Swapna

  • Will Lion work with older programs

    I have lots of older programs including Adobe CS, Adobe CS3, Eudora 6.2, etc. that work fine on my iMac running 10.6.8 with i3 processor, will they work with Lion if I upgrade? Just checking before I download the update. Thanks for any info.