Business Partner not replicating automatically from ISU system to CRM

Hi All,
        We are working on transferring BP from ERP to CRM. Following are the main ways that we are using for the same :
1) We are creating reference customer with role Sold-to-party in transaction VD03 using internal no range.
2) Then we are creating ISU BP using the internal same number range and giving the above created customer no as reference customer and finally saving it
3) We have maintained the settings in PIDE from R/3 to CRM as :
Sold-to-party     B   ZD02 External Checked
DEBI                B   ZD02 External Checked
We are using BUPA_MAIN as Bdoc.
I get the follwing Bdocs in CRM system :
1) In SMW01 in CRM I am getting the reference customer created in Step 1 as automatically replicated to CRM and in Success state
2) Also I get the Bdoc in Error State for ISU BP created in Step 2. Then if I try to pull the BP it comes in Success state.
My problem is that the BP Bdoc should automatically come in Success state in CRM.
Please help me solve this problem.

Hi,
We also have the same approach of BP, CA and contract creation. These data, after creation in ISU are replicated to CRM. We had an issue while replicating the Contract. The contracts were not getting replicated if the contracts donu2019t have the Service Provider and external service provider information. We donu2019t require to capture this information at contract. We are now forced to capture have this information at contract level just for the replication purpose. Is it mandatory to have the service provider information in contract for the replication of contract to CRM.
Regards,
Murali

Similar Messages

Classification View in BP is not replicating to from ISU to CRM

Hi All,
I am very new to SAP CRM Middleware. We are upgrading to CRM 7 in out project.
When we run a request load to replicate BP (Busines Partner) from IS-U to CRM, It successfully replicates all the data from ISU to CRM.
But only the Classification Data is not getting replicated to CRM. Please see screen shot sbelow:
ISU Screen shot: XD03--> Additional Data
In CRM after Replication:
Attribute 4 is not copied. Can anybody suggest me any solution to this problem?
Thanks in advance,
Suman

Hi Ramana,
You need to set up CRM middleware for Initial and delta load of Business Partners from R3 to CRM.
This link may help you ->
http://help.sap.com/saphelp_crm40/helpdata/en/1c/924555855849ba896b0af806cd343c/frameset.htm
Cheers,
Ashish

Organisation Structure is not replicating completely from R/3 to CRM

Hi SAP Gurus,
Plaese help me out in this issue.
We are replicating organisation structure from R/3 to CRM. There is Org Structure in which there are some sub org units say 6, under main org unit with positions and jobs. When try to replicating by tcode PFAL with evaluation path OS-CP, it geneartes IDOC in R/3, all are succesfully processed and Green. IN CRM, these Idocs are red and yellow with staus 51 and 52. As a result of this partial, org structure is replicated to CRM. In CRM, the Idoc is failed and It shows following errors:-->
1. Resource key 4AFBD7B949F406E9E10000000B7404B7 is not known (Status 51)
2. HR: ALE inbound processing for HR master data (Status 52)
3. No Filter, No Conversion, No Field converted.
Plaese advice to resolve this issue.
Thanks a lot,
Kind Regards
Ash
Edited by: Raman Khatri on Nov 23, 2009 2:43 PM
Edited by: Raman Khatri on Nov 23, 2009 2:47 PM

You can copy exactly error ??..
For replication you need use tx PIDE in R3.
In folder CRM>R3 you assign "BP Classification: Consumer, Customer, Sales prospect, competitor" to account group in R3. The BP Classification is hard code in CRM and only are available 5 types of classification.
In folder R3> CRM you assing Account group R3 to CRM Classifcation and grouping. Grouping CRM is done in SPRO > Cross-Application Components >SAP Business Partner > Basic Settings > Number Ranges and Groupings > Define Groupings and Assign Number Ranges.
Then, you define filter for replication in tx R3AC1 and replicate with tx R3AS

Materials are not downloading automatically from R/3 to CRM

Dear All,
My R/3 team has created 10 new u201Cmaterialsu201D in R/3 system and these materials suppose to interface to CRM automatically, but it was not.
Before creating these new u201Cmaterialsu201D in R/3 I should have download the u201Cmaterial groupsu201D to CRM. But mistakenly I created the material in R/3 on 14/04/2009 and I downloaded the material groups to CRM on 16/04/2009.
Does u think this delay stopping automatic u201Cmaterialsu201D replication from R/3 to CRM?
I even check for middleware errors in SMW01, but i did not find any error messages.
Kindly advice!
Regards,
Silpa.

Hi Arup,
Thanks for the reply,
I undersatnd that, before we download the "materials from" R/3 to CRM, "material groups" must be exist as "categories" in CRM system.
Materials created in R/3 on 13/04/2009, but materials groups have been downloaded to CRM on 16/04/2009, that's why system unable to interface the materials to CRM automatically.
System tried to interface the new materials on 13/04/2009 but it could not , because new material groups not available in CRM at that time.
Since our material groups are existed in CRM system, we would like to download the 10 newly created materials from R/3 to CRM system.
Please tell me what load i have to execute ?
R3AS (Adapter object -Material) - Initial donwload ?
R3AR4 (Adapter object -Material) - Start request ?
Is there any way to system to donwload them automatically ?
Regards,
Silpa.

Made automatic from the system to pick business area ?

Hi
For VAT GL account system is asking business area to entered manually, can this be made automatic from the system to pick business area ?
Thank You
Ramakanth
Edited by: Ramakanth Ambala on Jul 24, 2008 10:07 PM

Hi,
I think there is no possibility of picking business area automatically in FI.
But in CO u maintain the business area within controlling. This means that when you create cost center master records you need to specify the business area. CO objects such as, cost centers and internal orders aid account assignment, as the business area can be derived from the master data records. When you post primary costs to a cost center, the system determines the business area automatically from the cost center master data. This enables the costs to be assigned to the correct business area.
Therefore, you do not need to manually set the business area in the posting document, as the system does this, and thus reduces the number of incorrect assignments to a minimum.

CUSTOMER_REL - Business partner not created; duplicate check on address

Hello Colleagues
I have a problem during CUSTOMER_REL replication from ERP to CRM.
In r3am1 object looks fine but in some BDoc following error appears:
Assignment person - address exists already
Message no. AM038
and the Business Partner for Contact Person is not created.
We are on:
SAP_ABA     701     0005     SAPKA70105     Cross-Application Component
SAP_BASIS     701     0005     SAPKB70105     SAP Basis Component
PI_BASIS     701     0005     SAPK-70105INPIBASIS     Basis Plug-In
ST-PI     2008_1_700     0001     SAPKITLRD1          SAP Solution Tools Plug-In
SAP_BS_FND701     0005     SAPK-70105INSAPBSFND     SAP Business Suite Foundation
SAP_BW     701     0005     SAPKW70105     SAP Business Warehouse
SAP_AP     700     0018     SAPKNA7018     SAP Application Platform
WEBCUIF     00     0005     SAPK-70005INWEBCUIF     SAP WEBCUIF 700
BBPCRM     700     0005     SAPKU70005     BBPCRM
BP-CRM70     700V1     0000               SAP Best Practices for CRM 7.0
BP-INSTASS     600V7     0000               SAP Best Practices Solution Builder
ST-A/PI     01L_CRM5700000               Application Servicetools for CRM 500 51
And have already applied
1394635
1396910
1397895
1410788
1438046
But it is seems problem lies on SAP_ABA as I have found note
1092089 - Business partner not created; duplicate check on address
which is valid for different BP role and
SAP_ABA 700
SAP_ABA 710 but not for our 701
Have you ever seen similar issue?
Thanks in advance
Michal

Hi Naresh,
Thanks for reply. Correction instructions from this note refer to METHOD MODIFY_CONP_ADDRES which doesn't exist in crm7.0.
I can see in CRM that contact person is replicated and is present in BUT000 but table BUT052 is empty for this contact.
What is more we have implemented in our CRM note 564538 To change Contact Persons grouping replicated from ECC to CRM.
But also have: Note 757955 - Incompatible change concerning CRMC_BUT_CALL_FU.
We checked as well
Note 609766 - Correction of BP GUIDS in CRMM_BUT_CUSTNO, BUT000, CRMKUNNR
Note 836353 and run reports to find inconsistencies in tables BUT052, BUT051, ADCP and ADRVP. However no inconsistencies were found.
Thanks in advance if you have any other idea.
Cheers,
Michal

After upgrade to Yosemite my MacBook Air does not switch automaticly from wifi to ethernet. How to sloven problem?

After upgrade to Yosemite my MacBook Air does not switch automaticly from wifi to ethernet. How to sloven problem?

Have you tried changing the order in Network Preferences pane?
Open System Preferences/Networks/Click the gear symbol under the service list. Select set service order then drag. If your wifi is above the ethernet move the ethernet to the top. Click ok. Click apply (bottom left) and test.
Hope this helps
PJRS

Business Partner Notes appearing as GUID

Hi All,
In MSA Business partner notes are appearing as GUID instead of text. As a fix we have done the extract on CAP-Gen Object which solves the problem temporarly.
If new notes are added to the Business partner then once again the problem occurs appearing as GUID instead of the note details.
This impact is there only on the few machines but major machines are working fine.
Can any one let us know the cause for why the GUID is appearing instead of note details.
Thanks,
Regards,
Vikram Donthy.

Hi,
which version/SP of MSA are you using?
Did you already apply the accordant hotfix(es) mentioned in the particular collection note?
Regards,
Wolfhard

Getting a "Business partner not found with partner function type requester"

Hi There,
After I add a text item to the shopping cart using the SHOP t-code, I get a message "Business partner not found with partner function type requester" What could be causing this and how can I rectify this problem.
Please help mas this is an urgent issue.
Thanks,
Grace

Hi Grace,
First check :
1- transaction : CRM_OM_BP_INTEGRATE
select org structure where your user is and check that you have green lights (no missing address....)
2- Run transaction USERS_GEN
Select check user
Is everything correct or does the user need to be repaired ?
Kind regards,
Yann

Error while Replicating Objects from R/3 to CRM

Hi,
While replicating objects from R/3 to CRM (Tcode :R3AS), the status of the object is still running. When I checked in Outbound queue (Tcode:SMQ1) the status is 'SYSFAIL', when I double clicked it says "Password logon no longer possible - too many attempts". So what is the solution to it...
I am working on CRM 5.0
Regards,
vimal

Dear Vimal,
Sorry not sure then...
Sometimes the RFC connection is refused and use to give that particular error messgae due to:
The old RFC library having version 6.20 automatically converted the
password into uppercase with a size limit of 8 characters before sending it to the SAP system.
The RFC library version 6.40 does not perform this conversion any more, because mixed case passwords upto 40 characters are now supported by SAP Basis version 7.00 (eg. NW2004s) and above.
So need to use upper case passwords when connecting to an SAP system having version less than 7.00.
But this is not valid in this scenario.
Thanks,
Atin

Load the data from Legacy system into CRM

I'm new to CRM,I would like to know What is the procedure used to Load the data (ex: Business partners data ,Organization data,Sales data, etc.) from Legacy system into CRM system?
Can anyone explain me and send any documents,it would be very helpful.
I highly appreciate your help.
Thanks,
[email protected]

Hi Rani,
You can also use the ALE IDOC method to load data from legacy to CRM system if you have some middlware tool(E.g. XI) in between. We have implemented this in our project where we were getting flat files from legacy, XI was converting the same into IDOC and the IDOC was sent to CRM where we read the IDOC data, populate the standard BAPI's or function modules to create the data in CRM.
You need to define an IDOC TYPE similar to the data structure on the legacy system. Maintain the ALE settings. Write the function module to validate and create data in the CRM system.
E.G. To create business partner SAP has provided BAPI_BUPA_CREATE_FROM_DATA bapi.
Reward points if it helps.

Not booting automatically from main HD

I'm not sure since when this happens, I don't frequently shut down my mac, once a week average.
When I shut down, it doesn't boot again from main HD, the rounding "loading gif" above the apple keep rounding forever. To start up I got to boot whit "Alt/Option" pressed and choose the same HD as start up system. In other words, it is not booting automatically (or is hanging) but it does manually. Why?
Important information: I'd replace my CDR Drive by a SDD and Installed Lion on id, leaving the original HD for storage only. Also it is reseting the hour and day every time, so I'm wondering if it is forgetting about the state of local drives and trying to boot from original HD that hasn't a system anymore.

Hi,
We also have the same approach of BP, CA and contract creation. These data, after creation in ISU are replicated to CRM. We had an issue while replicating the Contract. The contracts were not getting replicated if the contracts donu2019t have the Service Provider and external service provider information. We donu2019t require to capture this information at contract. We are now forced to capture have this information at contract level just for the replication purpose. Is it mandatory to have the service provider information in contract for the replication of contract to CRM.
Regards,
Murali

Error while replicating employees from R/3 to CRM. BP no. are not created

CRM Experts,
Request your help in solving the following issue.
While replicating the employee information from R/3 to CRM, we get the following error message in the IDoc details.
Message:
IDoc: 0000000000057590 Status: IDoc ready to be transferred to application
Immediately processing not possible: Screen output without connection to user.
Steps:
1. Using PFAL TCode, we push the details of "Persons" from R/3 to the CRM client.
2. After pushing the details, come to CRM and see the IDoc details. We get the above mentioned error message.
3. The BP number is not getting generated.
Really appreciate your solutions/suggestions/clues.
Thanks in advance,
Vijay

Dear Vimal,
Sorry not sure then...
Sometimes the RFC connection is refused and use to give that particular error messgae due to:
The old RFC library having version 6.20 automatically converted the
password into uppercase with a size limit of 8 characters before sending it to the SAP system.
The RFC library version 6.40 does not perform this conversion any more, because mixed case passwords upto 40 characters are now supported by SAP Basis version 7.00 (eg. NW2004s) and above.
So need to use upper case passwords when connecting to an SAP system having version less than 7.00.
But this is not valid in this scenario.
Thanks,
Atin

Business partner not created in SRM in HR-SRM integration

Hi All,
We are setting up SRM HR integration set up with ALE idocs message type.
I ve done configuration as per guide available in SAP.Setting up parnter profiles,maintaining message types in both the systems ,mainyaining entries in tavle T77S0 for HRALX , maintaining filters in distribution model in BD64. When I start replicating the data using PFAL in R/3 ,the idocs triggered are green in both R/3 and SRM for org units ,Postions and also Persons.
Still i dont see BP created for most of the employees.Only few are getting craeted.When I check the log in SLG1 it says Marital status could not be converted.
I maintained all entries as per the entries available in R/3 in SPRO-Cross application components- SAP Business Partner-Business partners-Natural Persons-Maintain Marital status . Still i rceive the same error in SLG1 and BP is not getting craeted with idoc in green in SRM.
CAn any one please help.
Thanks in advance,
Sheetal

Hi
On SRM side using WE05 transaction see the failed IDOC's to get the complete details of the error. As you are saying that some of the users are successfully replicated issue may be on the ECC side HR info type relation ship missing. Ask your HR team to check the same.
On ECC side check table HRP1001 to see the difference between the successully replcaited users and one which failed.
with regards
Manjunath

Business partner not created in FSCM

Hi,
I have a problem where in creating customer master data in FI creates a business partner in FSCM for all the payers except in the case when partner functions(sold-to, ship-to) on the sales area tab of the customer master record are populated. I do not know why this is the case - why would partner function fields on the customer master record break the automatic creation of business partner in FSCM?
Helpful answers would be rewarded.

Hi
We dont have any problem by entering the Industry field in the customer master for the creation of the business parter for FSCM. May be you need to check what are the parameters that will be passed on for creating a business partner from the customer master.
Thanks
Ashok

Business Partner not replicating automatically from ISU system to CRM

Similar Messages

Maybe you are looking for