Business partner replication from ECC to CRM

Hello community!
I need help with business partner replication for financial services from ECC 6.0 to CRM 7.0 using standard intagration scenario BusinessPartnerReplication from XI Content SAP ABA 7.0. Scenario type is asynchronous ABAP Proxy to ABAP Proxy.
I activated proxies on ECC and CRM side as described in blog: /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
ECC, CRM, PI systems are registered in SLD.
And also i created configuration scenario based on BusinessPartnerReplication scenario from XI Content SAP ABA 7.0 and all necessary configuration objects.
The thing that i cann't find:
What standard function modules from link below should i activate on ECC sender side and CRM receiver side in transaction CRMC_BUT_CALL_FU for my replication work?
http://help.sap.com/saphelp_crm50/helpdata/en/96/3c8942ecd55551e10000000a1550b0/content.htm
Thank you in advance, Dzmitry

The list of standard FM you can find in sap note: Note 875420 - Business partner transfer to SAP GTS: Exchange Infrast. (XI).
BR,
Dzmitry

Similar Messages

Business Partner replication from ECC to CRM based on Company code

Hi:
I got this requirement where we need to transfer customers from ECC --> CRM. Customers specific to a company code.
Trying to maintain Filters for CUSTOMER_main--> KNB1- BUKRS to filter customers by a certain company code. I get this error " Table not maintained in smoftables."
Checked table " SMOFFILFLD" to see there are no entries for KNB1.
While I could check with my superiors on restricting transfer of customers based on Sales area data, as KNVV and KNVP data is maintained.
I would like to know if I can proceed with adding new table KNB1 to this table. If this is not recommended kindly suggest one.

The list of standard FM you can find in sap note: Note 875420 - Business partner transfer to SAP GTS: Exchange Infrast. (XI).
BR,
Dzmitry

Replication of partner function from ECC to CRM

Hi experts,
We are working on CRM 5.0 with back end ECC 6.0
In our scenario we are creating sales orders in ECC and replicating it to CRM.
Now the problem is we have a partner function created in ECC which is entered manually ( not through partner determination procedure) . We have also created the same partner function in CRM but we are not able to populate that partner function field automatically.
Is there any way by which we can populate this ?
Points will be rewarded for suitable solution.
Regards,
Madhu

hi
just mainatining partner function wont be enough ,you need to do two things
1. mapping of BP function between CRM and ECC
2. specify the path from ECC to CRM so that they can be replicated successfully
so,IMG: Customer Relationship Management -> Basic Functions -> Partner Processing -> Data Transfer -> Distribution of Partner Functions from SAP ECC into CRM
this is the path where in distribution you need to specify the path
and maintain there the mapping between the R3 and CRM
RFC destination should be CRM and source is ECC
best regards
ashish

Issues in employee replication from ECC to CRM through ALE/IDOC

Hi,
We are replicating the employees from ECC to CRM through ALE/IDOC.
Some times for some employees, the Idoc status in CRM is 52(Application document not fully posted) in CRM (WE02 tcode)
If I see the details its showing as " Identification Category BPCCOD is Not Assigned to Any Identification Type"
What I need to do now to avoid this.
Pl suggest
Regards
BABU.

Hi Babu, I'm having the same error when I replicate my employes. I have define BPCCOD in spro - Cross-Application Components - SAP Business Partner - Business Partner - Basic Settings - Identification Numbers, but this configuration does not resolve my problem.
Could you resolve this problem?.
Pls. let me know...
Regards,
George

Equipment Replication from ECC to CRM 6.0

Hi Gurus,
I am trying to Replicate equipments from ECC to CRM 6.0
I did all the activities as specified still encountering issue while replicating.
I did following activities
1) Default settings
OLTP-EQ-0401-0401-X(Delta)
2) BADI - CRM_EQUI_LOAD_STDIMP (Activated)
3) Specify adapter object for uploading objects
0401 - DNL_EQUIPMENT
I tried to load Equipment through R3AS for "EQUIPMENT" OLTP selected.
A) I checked SMQ1, SMQ2 - No Queues are blocked.
B) SMW01---Found 2 lines for BDOC Type CRM_EQ_DMBDOC with green light successfully processed.
C) But if I Check through R3AM1 (monitor Objects) the Adapter "EQUIPMENT" is aborted.
I checked the BDOC Message for the passed lines in SMW01 it says
1) Start of Initial load.
2) No Objects were selected.
In ECC, I see enough equipments in EQUI Table. But I haven't given any filters in EQUIPMENT so that it will select all.
Please correct me if I am following a wrong process or forward me the check list for Equipment load.
I tried almost a full day on this but nothing accomplished and I found similar failure postings for Equipments a lot in Forums.
Please advice.
Thanks,
Sharath.

Hi Sharath,
I am getting the same problem as yours while trying to download EQUIPMENTs from ECC to CRM.
I have done the following steps:
1. Created a category for the object family 0401 and assigned the relevant set types to it.
2 Maintained the settings for downloading equipments into CRM at:
SPRO --> Master Data --> Installed Base --> Replication of technical objects from SAP ERP --> Define default settings for replication equipment.
3. Activated BADI CRM_EQUI_LOAD
On triggering the initial load am getting 2 F02 state CRM_EQ_DMBDOC bdocs w/o any classical / extension data in it. When I check for the trace I get to see the message 'No objects selected' for the ECC system though there are equipments in the ECC equipment table EQUI.
Would appreciate if you could share how did you solve your problem.
Thanks in advance for the help!

Customer replication from ECC to CRM

Hello everyone,
I am having some difficulty replication a customer from ECC to CRM.
In our environment, customers are generally created from CRM & then replicated to ECC.
Now we are creating a new Distribution channel & hence want to extend all our existing customers to the new DC.
Since I am a SD Consultant, I was thinking of extending the customers in ECC.
I tried extending a customer which was originally created in CRM. When I extended it to the new DC in ECC, it dint come over to CRM.
I cannot see any BDOC in SMW01 also.
Also when I checked the Filter setting in R3AC1 for objects BUPA_MAIN & Customers .. there is nothing set in the filters for the source ECC.
Do I have to check any additional objects which I need to check ?
Or is it that no settings means nothing created in ECC would come over ?
Can anyone guide me so as to understand why this is happening.
Also if there are any filters which i need to check, can anyone tell me what tcode & what adapter objects do i need to check ?
Thanks
Vin
Edited by: vinit parkar on Aug 3, 2010 10:58 PM

Hi,
If you are downloading Customers from ECC(XD01/XD02/XD03) then CRM uses the adapter object CUSTOMER_MAIN and not BUPA_MAIN. You can check if there are any filters in this object.
Alternately you can check if the delta is active in ECC. I do not remember the transaction for checking this but you can find the same from the menu path.
Cheers
Binai

Business partner replication from CRM to ECC

Hi everyone,
In case of vendor master data after business partner creation in CRM the vendor Master Data should get created in ECC
system also at the moment i dont have an idea whether it will get replicated to ecc are not can any one help me how to acheive this requirement.

>>Messages sent when I test corresponding proxy interface, but not sent when I try to create or modify BP. What else should I check to find out the reason of this problem?
BP Creation will be done be a standard SAP program may be a Function Module. Change Pointer or User Exist should be added to this BP Creation Function Module in order to trigger the Proxy Class with BP data.
Though am not an ABAP expert, I guess the changesshould be done to the standard flow to trigger Proxy Class also..
~SaNv...

Business Partner Replication from CRM to R/3

Hello friends,
I am not able to replicate BP from CRM to R/3. When i create a business partner i see bdoc
in SMW01 with status in yellow colour and there is no error description. If i try to debug
the replication in foreground, i can see all the entries which i entered in CRM done in R/3,
but it stops at the Customer attribute screen(Additiona fields as seen in Extras in the task
bar) and doesnot goes further, even if i enter something it remains in the same state. As
per me the customer attribute field in not mandatory in R/3, i dint found the settings for
it in SPRO but logically if R/3 system allows me to save the customer without entering the
attributes then my thinking should be right.
Kindly give me some pointers to resolve this or please let me know the check points,
prerequisites for replication of customers from CRM to R/3.
Thanks & Regards,
Yogesh

Hi Yogesh,
Check the R/3 transaction OB20, Double clidk on "Create Customer (Centrally) "
Here we maintain the options for all the field e.g required / optional etc..
<b>Reward points if it helps!!</b>
Best regards,
Vikash.

Replication of Business Partner Data from ECC to legacy

Hi,
My requirement is to replicate any changes made to Business Partner,should immediately get reflected in the legacy.
Which is the best method to follow.I am planning to use ABAP proxies instead of IDOCS.
As the replication needs to be immediate,Can I use ABAP Proxy.?
And for tigerring this proxy I need to enhance the code for Business Partner(BP) to call the proxy.
Is my approach correct or do I need to follow any other approach.
Regards,
Vinod Kumar.

Hi,
The approach should be based on the kind of data you want to upload in SAP. if you want to upload some standard process documents like Sales order/ purchase order then it will be good to use IDOC. As we have Standard IDOCs available in SAP to upload such document in ECC. In case you want to track the change in data from BP which is not part of any standard process then in that case you can go for ABAP proxy.
If you are using ABAP proxy you dont need to call it from BP. From BP the changes will be sent to PI (in the form of File/database Query/JMS Queues ..etc ). Then PI will call inbound proxy from ECC and post the data.
Please let me know if you have any other Qs.
Shweta.

Middleware: Business Partner replication from CRM 4.0 -- R/3 4.6c.

Business Partner created in CRM & is getting replicated into R/3 with Sales Area Data. Configuration is working fine.
Requirement: Automate Accounting view creation in R/3 using middleware.
1. That is if the user creates Sales view using sales organisation "xxxx" in CRM then the system should create Accounting view in R/3 company code "YYYY".
Please confirm, wheather its possible? ? How?
2. If in CRM, the Sales Organisation is "AAAA", then create accounting view in company code "BBBB" (R/3)
Your valuable input please.
With Regards,
Bapu

Hi Tiest,
Yes, PIDE entries made.
BP is replcating in R/3 successfully.
In R/3 transaction "XD01" if we create customer along with "Account Group" & "Company code", view "company code data" is visible. I would like to populate this view with "Reconciliation account" entry.
While passing data from CRM, I would like to pass company code. At present, while passing BP from CRM to R/3, Account View is not getting created.
Ex. If the user creates Sales view using sales
Organisation xxxx in CRM then the system should create Accounting view in R/3 company code YYYY.
Please reply, if further information required.

Problem in customer replication from ECC to CRM

Hi experts,
When I create a customer in ECC using Tcode XD01 a BDOC is created in CRM. But this Bdoc shows following errors:--
     Partner (): the following errors occurred
     Incorrect input data:
     Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN.
When I see the Bdoc message body the data(central data etc )is all blank except the field Object = BUSINESSPARTNER.
Why the Bdoc messae is not getting populated with correct value?
Also how I can see the data which is being sent from ECC. Is there any Idoc or something created at ECC outbound side where I can see the sent data?
Where in XD01 bdoc message is being created?
Please help.
Regards,
Vimal

Hi Vimal,
You'd need to debug the FM CRM_BUPA_MAIN_VAL to find out what was the cause of validation error. Once you get the missing details, check if those details are being populated correctly at ECC end.
Thanks,
Rohit

Problem in passing customer Partner Functions from ECC to CRM

Hi to all, I am facing the following error in the crm system
1.Partner 0000080059(DCEAB7AC31DA22F1B7CE001372368B21): the following errors occurred
Message no. BUPA_MW_EXCHANGE010
2.Status exists already for this business partner
Message no. CRM_BUPA_FRG0050012
3.Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN.
Message no. SMW3018
My scenario in ECC is: I use a custom BTE copy of VMD_VENDOR_BTE_1421_IMPL which is executed when I save a new vendor. In this BTE I use the FM SD_CUSTOMER_MAINTAIN_ALL to create a customer with the same attributes as the vendor, because only customer informations (not vendor informations) pass as Business Partners in CRM. The problem is that when I pass only master datas to the FM SD_CUSTOMER_MAINTAIN_ALL, the customer passes to CRM as a Business Partner with the same number, but when I pass also Partner Functions to FM SD_CUSTOMER_MAINTAIN_ALL, no Business Partner is created in CRM, and the error I get is that up.
What can I do?
Thank you very much,
Antonio

Hola Antonio,
I have a same problem.
You can tell me the solution.
Please.

"Error in validation" in order replication from ECC to CRM.

Hi,experts,we always have a problem,that is the "Billed" status can not be replicated to CRM from ECC(We excute billing in ECC).
In the BDOC we always have error message "Error in Validation (Details: transaction SMW01)".
I found the preceding contract of the order had been locked by the middleware user.
Is it related with the BDOC validation??
Can anybody suggest?
Thanks.
Jerry

Hi,
Please unlock Queue using SMQ1 ( Outbound ) & SMQ2 (Inbound Queue)
First try using SMQ1 & SMQ2 in CRM then try in ECC.
Regards,
Rajendra Sonawane

Business Partner Replication from R/3 to CRM

Hi,
I am trying to replicate BP (eg 891151) from R/3 to CRM. While replicating Error segment in T.Code SMW01-Display BDocs shows that industry AXALTO is not maintained.
I was searching this in Table TBRC in R/3 but says No table entries found.
But the same Industry is attached to the Customer in XD03 in R/3 in field Global Account.
My doubt is, the particular field (Global Account) is having a search help and it is allowing a data which is not maintained in master data.
Whether is it possible ?

Hello,
You should ask this kind of question in this SAP CRM: Webclient UI - Framework.
Check if you execute the initial dowload of adapter object DNL_CUST_TBRC.
Regards,
Fred

Order replication from ECC to CRM

Hi All,
The requirement is we have different order types for example, ZOR, ZGW, KE in ECC out of which we would like to replicate only ZOR order type orders. So I used Adapter SALESDOCUMENT in CRM and set filters with AUART (Order type) EQ ZOR and ERDAT (Creation Date) GE '04/05/2010' so my assumption is if any ZOR order is created after 04/05/2010 they will replicate to CRM.
And I created transaction type ZOR in CRM and ZGW, KE are not created in CRM as I do not need them. I checked CRMFILTAB and the filters are there but the issue is:
Everytime I create ZOR order in ECC these order are replicating fine. There are 2 BDOCs generated R3AD_'CUSTOMER' and CSA_ORDER_'Order number' successfully...so far so good.
Whenever I create any order with ZGW, KE Orders, even these orders are trying to replicate to CRM and getting failed as we do not have ZGW, KE Order types in CRM. The BDOC is R3AD_XXXXXXX is failing with the following error messages.
-->Processing of document with Guid A6BE324C3C92B353E10000000AFEC80C is canceled
-->Business transaction type ZGW does not exist
-->Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG.
For example, if the order is created for customer 7719, In SMQ2, R3AD_0000007719 as failed and this is blocking all other 7719 customer related changes. How to make these other orders not even try to replicate to CRM and fail.
Please advise.
Thanks,
Sharath.

Hi Shekar,
Thanks for the Reply.
Here are my versions
CRM --- CRM 2007
ECC --- ECC 6.0
I know we are eligible for Scenario A but I haven't activated the Scenario A settings as of now. What we did was, we made the message in ECC from Error to Warning so that it'll allow us to change the order created in CRM. I wasn't aware of the scenarios during that time as I was new to CRM, recently I went through and need to activate them in the system.
In CRMPAROLTP Table, these are entries I have
CLIENT     PARNAME                                                          PARNAME2                         PARNAME3             CONSUMER
300          CRM_EXIT_BEF_DATA_TRANSFER                 CONDITIONS                       CONDITIONS              CRM
300          CRM_EXIT_CRM_GET_QNAME                         BEABILLSTACRMB                                               CRM
300          CRM_EXIT_CRM_GET_QNAME                         BEABILLSTAIPMI                                                   CRM
300          CRM_EXIT_CRM_GET_QNAME                         BEABILLSTAIPMO                                                 CRM
300          CRM_EXIT_CRM_GET_QNAME                         BUPA_REL                                                             CRM
300          CRM_FILTERING_ACTIVE                                 BUPA                                  BUAG_MAIN               CRM
300          CRM_FILTERING_ACTIVE                                 BUPA                                  BUPA_MAIN                CRM
300          CRM_FILTERING_ACTIVE                                 BUPA                                  BUPA_REL                  CRM
300          CRM_FILTERING_ACTIVE                                 BUPA                                  CUSTOMER_MAIN       CRM
300          CRM_FILTERING_ACTIVE                                 BUPA                                  CUSTOMER_REL         CRM
300          CRM_FILTERING_ACTIVE                                 BUPA_HIERARCHY            BUPA_KNVH               CRM
300          CRM_FILTERING_ACTIVE                                 CONDITIONS                                                           CRM
300          CRM_FILTERING_ACTIVE                                 EQUIPMENT                        EQUIPMENT                  CRM
300          CRM_FILTERING_ACTIVE                                 MATERIAL                         MATERIAL                    CRM
300          CRM_FILTERING_ACTIVE                                 VEND                                 VENDOR_MAIN            CRM
300          CRM_NO_BEFORE_IMAGES                             SALESDOCUMENT                                                 CRM
300          CRM_RELEASE
Please let me know, if I am missing anything. Do you think activating Scenario A is important? I think my versions suite that I need scenario A, If I am not wrong.
Thanks,
Sharath.

Business partner replication from ECC to CRM

Similar Messages

Maybe you are looking for