Business Partner Replication from R/3 to CRM

Hi,
I am trying to replicate BP (eg 891151) from R/3 to CRM.  While replicating Error segment in T.Code SMW01-Display BDocs shows that  industry AXALTO is not maintained.
I was searching this in Table TBRC in R/3 but says No table entries found.
But the same Industry is attached to the Customer in XD03 in R/3 in field Global Account. 
My doubt is, the particular field (Global Account) is having a search help and it is allowing a data which is not maintained in master data. 
Whether is it possible ?

Hello,
You should ask this kind of question in this SAP CRM: Webclient UI - Framework.
Check if you execute the initial dowload of adapter object DNL_CUST_TBRC.
Regards,
Fred

Similar Messages

  • Business partner replication from ECC to CRM

    Hello community!
    I need help with business partner replication for financial services from ECC 6.0 to CRM 7.0 using standard intagration scenario BusinessPartnerReplication from XI Content SAP ABA 7.0. Scenario type is asynchronous ABAP Proxy to ABAP Proxy.
    I activated proxies on ECC and CRM side as described in blog: /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
    ECC, CRM, PI systems are registered in SLD.
    And also i created configuration scenario based on BusinessPartnerReplication scenario from XI Content SAP ABA 7.0 and all necessary configuration objects.
    The thing that i cann't find:
    What standard function modules from link below should i activate on ECC sender side and CRM receiver side in transaction CRMC_BUT_CALL_FU for my replication work?
    http://help.sap.com/saphelp_crm50/helpdata/en/96/3c8942ecd55551e10000000a1550b0/content.htm
    Thank you in advance, Dzmitry

    The list of standard FM you can find in sap note: Note 875420 - Business partner transfer to SAP GTS: Exchange Infrast. (XI).
    BR,
    Dzmitry

  • Business Partner Replication from CRM to R/3

    Hello friends,
    I am not able to replicate BP from CRM to R/3. When i create a business partner i see bdoc
    in SMW01 with status in yellow colour and there is no error description. If i try to debug
    the replication in foreground, i can see all the entries which i entered in CRM done in R/3,
    but it stops at the Customer attribute screen(Additiona fields as seen in Extras in the task
    bar) and doesnot goes further, even if i enter something it remains in the same state. As
    per me the customer attribute field in not mandatory in R/3, i dint found the settings for
    it in SPRO but logically if R/3 system allows me to save the customer without entering the
    attributes then my thinking should be right.
    Kindly give me some pointers to resolve this or please let me know the check points,
    prerequisites for replication of customers from CRM to R/3.
    Thanks & Regards,
    Yogesh

    Hi Yogesh,
    Check the R/3 transaction OB20, Double clidk on "Create Customer (Centrally) "
    Here we maintain the options for all the field e.g required / optional etc..
    <b>Reward points if it helps!!</b>
    Best regards,
    Vikash.

  • Middleware: Business Partner replication from CRM 4.0 -- R/3 4.6c.

    Business Partner created in CRM & is getting replicated into R/3 with Sales Area Data. Configuration is working fine.
    Requirement: Automate Accounting view creation in R/3 using middleware.
    1. That is if the user creates Sales view using sales organisation "xxxx" in CRM then the system should create Accounting view in R/3 company code  "YYYY".
    Please confirm, wheather its possible? ? How?
    2. If in CRM, the Sales Organisation is "AAAA", then create accounting view in company code "BBBB" (R/3)
    Your valuable input please.
    With Regards,
    Bapu

    Hi Tiest,
    Yes, PIDE entries made.
    BP is replcating in R/3 successfully.
    In R/3 transaction "XD01" if we create customer along with "Account Group" & "Company code", view "company code data" is visible. I would like to populate this view with "Reconciliation account" entry.
    While passing data from CRM, I would like to pass company code. At present, while passing BP from CRM to R/3, Account View is not getting created.
    Ex. If the user creates Sales view using sales
    Organisation xxxx in CRM then the system should create Accounting view in R/3 company code YYYY.
    Please reply, if further information required.

  • Business Partner replication from ECC to CRM based on Company code

    Hi:
    I got this requirement where we need to transfer customers from ECC --> CRM. Customers specific to a company code.
    Trying to maintain Filters for  CUSTOMER_main--> KNB1- BUKRS to filter customers by a certain company code.  I get this error " Table not maintained in smoftables."
    Checked table " SMOFFILFLD" to see there are no entries for KNB1.
    While I could check with my superiors on restricting transfer of customers based on Sales area data, as KNVV and KNVP data is maintained.
    I would like to know if I can proceed with adding new table KNB1 to this table. If this is not recommended kindly suggest one.

    The list of standard FM you can find in sap note: Note 875420 - Business partner transfer to SAP GTS: Exchange Infrast. (XI).
    BR,
    Dzmitry

  • Business partner replication from CRM to ECC

    Hi everyone,
        In case of vendor master data after business partner creation  in CRM  the vendor Master Data should get created in ECC
    system also at the moment i dont have an idea whether it will get replicated to ecc are not can any one help me how to acheive this requirement.

    >>Messages sent when I test corresponding proxy interface, but not sent when I try to create or modify BP. What else should I check to find out the reason of this problem?
    BP Creation will be done be a standard SAP program may be a Function Module. Change Pointer or User Exist should be added to this BP Creation Function Module in order to trigger the Proxy Class with BP data.
    Though am not an ABAP expert, I guess the changesshould be done to the standard flow to trigger Proxy Class also..
    ~SaNv...

  • Problem with Business partner flow from R/3  to CRM

    Hi,
    We are setting up a process to flow of Business Partners from R/3 to CRM. 
    We have configured PIDE correctly but the problem is when I am creating any customer in R/3 we are getting DUMP.  
    Kindly help me in this regards.
    Thanks

    Hi,
    Check out the following Middleware Configuration :
         <b>CRM Middleware configurations</b>     
    1.     Source client for Client copy
         Using t-code SCC3 in both CRM and ISU to get the source client used for client copy.      Get source client for profile SAP_ALL.
    2.     RFC Destinations
         Use t-code SM59 and check if the following RFC destinations have been created:
    •     CRM
    o     R/3 Destination for CRM e.g. CRTCLNT240
    o     R/3 Destination for ISU e.g. ISTCLNT240
    o     Logical Destination for Middleware R&R queues – one for current client and one for client 000.                                                                            e.g. SAPCRM_MW_RR_240, SAPCRM_MW_RR_000     
    o     TCP/IP Destination for IPC dispatcher e.g. IPC_RFC_DISPATCHER
    o     TCP/IP Destination for IPC server e.g. IPC_RFC_SERVER
    •     ISU
    o     R/3 Destination for CRM e.g. CRTCLNT240
    o     R/3 Destination for ISU e.g. ISTCLNT240
    3.     Logical Systems
         Using t-code SALE check if the following logical systems have been created:
    •     CRM
    o     Own logical system – e.g. CRTCLNT240
    o     Logical system for ISU – e.g. ISTCLNT240
    o     Logical system for source client used in client copy – e.g. CRTCLNT200
    •     ISU
    o     Own logical system – e.g. ISTCLNT240
    o     Logical system for CRM – e.g. CRTCLNT240
    o     Logical system for source client used in client copy – e.g. ISTCLNT200
         Check if own logical system is assigned to the client.
         Path: Sending and Receiving systems -> Logical Systems -> Assign Client to Logical      System.
         Convert Logical System name in application tables
         Use t-code BDLS to convert logical system names in the application system.     
    1.     Enter old logical system name retrieved in step 1. e.g. CRTCLNT200
    2.     Enter new logical system name e.g. CRTCLNT240.
    3.     Select radio button Conversion of Client-Dependent Tables and execute the transaction.
    This process needs to be carried out 4 times: twice in CRM and twice in ISU.
    •     CRM
    o     Old CRM logical system -> New CRM logical system. e.g. CRTCLNT200 -> CRTCLNT240.
    o     Old ISU logical system -> New ISU logical system. e.g. ISTCLNT200 -> ISTCLNT240.
    •     ISU
    o     Old CRM logical system -> New CRM logical system. e.g. CRTCLNT200 -> CRTCLNT240.
    o     Old ISU logical system -> New ISU logical system. e.g. ISTCLNT200 -> ISTCLNT240.
    4.     Middleware Parameter tables
         Use t-code SM30 to maintain middleware parameters in following tables
    •     CRM
    o     Table SMOFPARSFA:
         Change value for following parameter entry:
         Key - R3A_COMMON
         Para name - CRM_DEFAULT_DESTINATION
         Value - Old ISU logical system -> new ISU logical system
              E.g. ISTCLNT200 -> ISTCLNT240     
    •     ISU
    o     Table CRMRFCPAR:
         Delete the previous entry for the following key:
         User - CRM
         Object name - *
         RFC Destination - Old RFC destination for CRM e.g. CRTCLNT200.
         Load types - All Load Types
         Create new entry with following data:
         User - CRM
         Object name - *
         RFC Destination - New RFC destination for CRM e.g. CRTCLNT240.
         Load types - All Load Types
         In Queue flag - X
         Send XML – No XML
    o     Table CRMPAROLTP:
         Change value for following parameter entry:
         Para name - CRM_DEFAULT_DESTINATION
         User - CRM
         Value - Old CRM logical system -> new CRM logical system
              E.g. CRTCLNT200 -> CRTCLNT240
    5.     Admin Console (Sites and subscriptions)
         Using t-code SMOEAC in CRM change attributes for the following sites.
    •     CRM site
    o     Name: Change name from old CRM logical system -> new CRM logical system e.g. CRTCLNT200 -> CRTCLNT240
    o     Description: Change description from old CRM logical system -> new CRM logical system e.g. CRTCLNT200 -> CRTCLNT240
    o     Site attributes: Change RFC destination from old CRM RFC destination to new CRM RFC destination e.g. CRTCLNT200 -> CRTCLNT240
    o     Click on get values button to refresh logical system details.
    •     ISU site
    o     Name: Change name from old ISU logical system -> new ISU logical system e.g. ISTCLNT200 -> ISTCLNT240
    o     Description: Change description from old ISU logical system -> new ISU logical system e.g. ISTCLNT200 -> ISTCLNT240
    o     Site attributes: Change RFC destination from old ISU RFC destination to new ISU RFC destination e.g. ISTCLNT200 -> ISTCLNT240
    o     Click on get values button to refresh logical system details.
         Check if ISU site is assigned to following subscriptions.          
    •     All Business Agreements (MESG)
    •     All Business Partner Relationship (MESG)
    •     All Business Partners (MESG)
    •     All Business Transactions
    •     IS-U Connection Objects (MESG)
    •     IS-U Contracts (MESG)
    •     IS-U Points of Delivery (MESG)
    •     Product Materials (MESG)
    6.     CRM Middleware Queues
         Inbound Queues:
    I.     Execute transaction SMQR.
    II.     Change AS group from ‘DEFAULT’ to ‘parallel generators’.                Path: Edit -> Change AS Group
    III.     Register following queues:
    •     CRM     
    o     CSA*
    o     R3A*
    •     ISU
    o     R3A*     
    Outbound Queues:
    I.     Execute transaction SMQS.
    II.     Change AS group from ‘DEFAULT’ to ‘parallel generators’.                Path: Edit -> Change AS Group
    III.     Register following queues:
    •     CRM     
    o     CSA*
    o     R3A*
    •     ISU
    o     R3A*     
    R&R Queues:
    I.     Execute transaction SMOHQUEUE in CRM.
    II.     Check if all queues have status ‘Released’.
    III.     Start Queue Demon by clicking on ‘Start Queue Demon’.
    <b>Please reward points if it helps.</b>
    Regards,
    Amit Mishra

  • Extracting Business Partner information from CRM to XI

    What is the best approach to extract Business Partner information from CRM to XI

    Hi,
    by IDOCs of course
    you can create them just like I did:
    /people/michal.krawczyk2/blog/2006/11/14/xipi-data-type-enhancements-standard-business-partner
    (you jut need to change from proxy to ALE - another module)
    but bisically it's a standard to generate
    a business partner record and send it as an IDOC from CRM
    Regards,
    michal

  • Scheduled delta replication from R/3 to CRM

    Hello Experts,
    we are planing to download customer master data from R/3 to CRM. It will be a completely one sided connectivity and we dont want to upload anything from CRM to R/3. And we are planing for Initial load as well as Delta load from only R/3 to CRM. How can I set this?
    And the delta  down load, we want to perform automatically once in day at a specified time..so is it possible?if yes how?
    thanks in advance.
    regards,
    kalyan

    Hi Kalyan,
    If You are using the Administration Console to deassign a site from a subscription or a subscription from a site, or to delete a subscription.
    The type of the related publication is simple intelligent (sync), simple intelligent (msg) or simple bulk (msg). As a consequence, changes (insert, update, delete) of a BDoc instance are sent to a site only if the site has been assigned the corresponding subscription. The assignment or deassignment of such subscriptions will not trigger a synchronization of the site database.
    Example:
    Your site Back-End is of sitetype R/3. It has been assigned a subscription for a BDoc type. The type of the publication is simple bulk (msg). The creation of a business object (for example, business partner) with identifier 111111 ensures that this business object will be sent to site Back-End.
    After deassigning the subscription in the Administration Console all changes in business object 111111 will not be sent to the site Back-End. In addition, a newly created business object with identifier 222222 will also not be sent to site Back-End.
    As you reassign the subscription, the following inconsistencies occur:
    Business object 111111 has not been synchronized in the R/3 back-end.
    Business object 222222 is not available in the R/3 back-end.
    And for scheduling background job for delta replication from R/3 to CRM, i am not sure about it.
    Regards
    Nadh.

  • BP Replication from R/3 to CRM

    Hi Forum,
    I am facing an issue with BP Replication from R/3 to CRM.
    Although the same scenario and configuration works well on my dev and qual environment and the same has been trasported to Production, apart from that R3 dev and qual system are completely updated with Prod data as on date so there is no question of any mismatch at the data level and config level.
    The following are the error messages am receiving in SMW01 for BUPA_MAIN:
    1. Business partner with GUID 36F36B473D31C04985CC8AEB314C6BE3 does not exist
    2. Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN
    Now none of my BP are flowing to CRM because of this issue.
    Appreciate any pointers for the resolution.
    Regards,
    Amit

    Hi Vikash,
    The RFCu2019s have been checked for authorisation test, remote logon n local logon. The RFC user is a dialog user and is working well for all logon. I have also checked both the systems they have the logical names as described by you (source & destination both).
    Another thing that validated my point regarding the connection setting is that the materials are flowing fine between the system and even the changes in these materials are replicating properly hence the delta for material is also fine.
    The Inbound and Outbound queues have been deleted from both r3 and crm and the only job running again at the moment is customer_main.
    Regarding you concern for the queue R3AI* it has not been generated even once whenever I have started the initial load. Right from the starting I am monitoring R3AD* in all the outbound and Inbound queues of both the systems.
    The sysfail message is coming for R3AD queue hence I think it is of no use to us. Still if I follow the error message it points towards SMW01 and there the error message is the same as described in the 1st message.
    I have just noticed 2 BP that have come in CRM as STP but its been hours after that no BP is flowing in.
    Now I am eagerly looking out for the final findings that we are going to get from the system when the issue is resolved.
    Thanks again and appreciate the efforts taken from your end.
    Regards,
    Amit

  • Entering Business Partner data from IC Webclient - CRM2007

    Just wanted to check that if I enter Business partner data from the IC Webclient is the data stored in the CRM backend tables for example BUT000, BUT050 etc and if so is this done on the fly or a scheduled update? If not what tables are they stored in.  Also can I see the same information once it is entered in the webclient via the CRM transaction BP Thanks

    Hi Niten,
    The tables are the same (for example: but000 for master partner data, but050 for relations, and so on...).
    The data is updated when you press the respective save button, or when you press the 'end' button at telephony bar (to end an Interaction Center Interaction).
    And yes, you can then check the information in BP t-code.
    Just try it and see by yourself
    Kind regards,
    Garcia

  • Business Partner extract from R/3 (or SRM) to MDM without XI

    Dear SAP Experts,
    do you have any solution for extraction of Business Partner data from R/3 (or SRM) to MDM without XI? I know transaction mdmgx and the reference data went to the MDM well. How can I do the same for master data without XI? Please write me a step-by-step solution, if you can, because we haven't got too much time, to solve this issue.
    Thanks a lot!
    Best regards,
    Ádá

    Hi Adam,
    there are different reasons for this:
    1. MDMGX selects data directly from tables. Customizing tables are very simple tables, thus it was possible to implement a direct access. Master data itself is stored in distributed, multiple tables. It's not this easy to extract the data, thus MDM_CLNT_EXTR is using special extractors for the master data objects. Those object extractors are delivered by the object owners, not by the MDM group.
    2. ALE IDoc and Proxy messages are the common way for data exchange between SAP systems. There are predefined IDoc and XML message types for master data. This was not the case for customizing data, so we decided to use FTP for MDMGX just as an exception.
    3. The MDM data model for business partners has to combine different data models: R/3's customer and vendor with CRM's/SRM's business partner. Those models have to be combined to a general MDM Business Partner model. This requires a structural and value mapping of the different structures. Currently this is done on XI using a XSLT Message transformation.
    BR Michael

  • To change business partner ( RFC enabled  Function Module )in CRM.

    Hi All;
    While sending a Business partner from R/3 to CRM. I would like to change business partner ( RFC enabled  Function Module )in CRM.
    Is there any exit or a BAdI which i can use to do this?
    Regards
    Yusuf Dagyeli
    Message was edited by: Yusuf Dagyeli
    Message was edited by: Yusuf Dagyeli

    Hi RAMS,
    1. Under the SWCV Go to the Imported Objects.
    2. Right click on the RFC and click on the Import of SAP object.
    3. Give the logon server name, system number the user name and pasword.
    4. Select the RFC u want to import.
    5. Execute the import and the RFC is imported under the SWCV.
    Now u can use this Imported RFC in the scenarios of that SWCV.
    Regards
    Santhosh
    Remember to set the thread to solved when you have received a solution

  • Custom fields mapping issue of sales order replication from R/3 to CRM

    Hello Experts,
    I have to replicate sales orders from R/3 to CRM system (Initial and Delta)
    The issue is I have custome fields in R/3 which are maintained in custom table(Z table) in R/3.
    We added those custom fields in CRM customer_i table to synchronise with R/3 data.
    To MAP R/3 custom fields to CRM custom fields, i have the following customization.
    1. Added the custom function module in the event CRMO_200 and moved all the custom fields into interal table  IT_OTHER_INFO.
    2. The intrnal table IT_OTHER_INFO with data is passed into CRM standard function modules.
    3. But in CRM the BADI 'CRM_DATAEXCHG_BADI' implementation does not have the input parameter of internal table TI_OTHER_INFO.
    All my custom data is in internal table TI_OTHER_INFO.
    Please suggest where can i map this data to CRM enhanced fields.
    Regards,
    Umashankar.

    Hello Vanessa,
    Thank you so much for your reply.
    I went through the Note (1053817). It is good. I understand that the custom fields should enhance in the BAPE_VBAP in R/3.
    My Scenario:
    Goal: Orders replication from R/3 to CRM along with Custom fields.
    In R/3, all the custom fields are maintained in Z table (Not VBAK or VBAP).
    All these custom fields are belongs to Item level.
    In CRM, The custom fields are maintained in CRMD_CUSTOMER_I table though AET.
    I need to MAP these custom fields to CRM while order replication from R/3 to CRM.
    Regards,
    Umashankar.

  • Business Partner Replication Documents

    Need Business Partner Replication Documents

    http 403 basically indicates that your authentication towards HCI does not work proper. Please describe here how your authentication settings in the Communication Arrangement and on the corresponding IFlow is defined.

Maybe you are looking for

  • G3 B&W with G4 processor from Pci Graphics

    Hi, I've recently acquired a G4 processor from a pci graphics model to use with my G3. Everything works fine except I'm not seeing gains in performance in comparsion of my last G3 processor. Is there something else that I should do to make it run in

  • Cost report for the project

    Hi, Which report will show the material cost, Equipment cost, Resources cost & Activity cost for the Project. Prashant

  • After updating from v.27.0a1 to v.28.0a1, it crashes on Startup (appcrash)

    Hello, After updating my Firefox Nightly from version 27.0a1 to version 28.0a1 the application is not launching anymore. I receive a APPCRASH Error with following Information (unfortunately in German): Problemereignisname: APPCRASH Anwendungsname: fi

  • PC Suite menu/appearance probelm

    Hi... I'm having some problems with PC Suite and would appreciate some advice or suggestions please. System Info: Vista Ultimate x32 with SP1 and all latest updates PC Suite v7.1.18.0 Cable connection Here's the problem.  Sometimes when I open PC Sui

  • Facebook buttons not working

    I uploaded a sample site HERE. I've tried to put the share button as explained on facebook's help page (located here) but it isn't showing up. It says to put the following code somewhere on the page (it suggests after the opening body tag. I have it