Business Place in selection screen of FS10N/FAGLB03

Hi,
Could anyone please help me out in getting Business Place i the initial selection screen of FS10N/FAGLB03.
Thanks & regards,
Nidhi

Hi,
Could someone please help me out on this.
Thanks & regards,
Nidhi

Similar Messages

How many push buttons can u place on selection screen application tool bard

hi
how many push buttons can u place on selection screen application tool bar
and what is default function code for that buttons.

Hi Chaitanya,
You can place maximum 5 push buttons on Application Toolbar.
please award the points incase if you are able to get the solution.
Thanks
Sivaram

Place two selection screen BLOCKS beside each other

I want to place 2 selectio-screen blocks side by side instead of 1 below other.
How to do that .?
Please help.

Just copy and paste and give the text elements with some texts.
selection-screen begin of line.
parameters session radiobutton group ctu. "create session
selection-screen comment 3(20) text-s07 for field session.
selection-screen position 45.
parameters ctu radiobutton group ctu.     "call transaction
selection-screen comment 48(20) text-s08 for field ctu.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 3(20) text-s01 for field group.
selection-screen position 25.
parameters group(12).                      "group name of session
selection-screen comment 48(20) text-s05 for field ctumode.
selection-screen position 70.
parameters ctumode like ctu_params-dismode default 'N'.
                                      "A: show all dynpros
                                      "E: show dynpro on error only
                                      "N: do not display dynpro
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 3(20) text-s02 for field user.
selection-screen position 25.
parameters: user(12) default sy-uname.     "user for session in batch
selection-screen comment 48(20) text-s06 for field cupdate.
selection-screen position 70.
parameters cupdate like ctu_params-updmode default 'L'.
                                      "S: synchronously
                                      "A: asynchronously
                                      "L: local
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 3(20) text-s03 for field keep.
selection-screen position 25.
parameters: keep as checkbox.       "' ' = delete session if finished
                                      "'X' = keep   session if finished
selection-screen comment 48(20) text-s09 for field e_group.
selection-screen position 70.
parameters e_group(12).             "group name of error-session
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 3(20) text-s04 for field holddate.
selection-screen position 25.
parameters: holddate like sy-datum.
selection-screen comment 51(17) text-s02 for field e_user.
selection-screen position 70.
parameters: e_user(12) default sy-uname.    "user for error-session
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 51(17) text-s03 for field e_keep.
selection-screen position 70.
parameters: e_keep as checkbox.     "' ' = delete session if finished
                                      "'X' = keep   session if finished
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 51(17) text-s04 for field e_hdate.
selection-screen position 70.
parameters: e_hdate like sy-datum.
selection-screen end of line.
selection-screen skip.
selection-screen begin of line.
selection-screen comment 1(33) text-s10 for field nodata.
parameters: nodata default '/' lower case.          "nodata
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(33) for field smalllog.
parameters: smalllog as checkbox. "' ' = log all transactions
                                     "'X' = no transaction logging
selection-screen end of line.
Regards
Gopi

Business Place in Dynamic Selection Screen

Dear Gurus,
I want to bring Business Place field in Dynamic Selection Screen of Transaction code FBL3N. Please guide how to do this.
Regards,
VS

HI,
The fields which are eligible for dynamic selection can be reviewed for
the related logical database via trans SE36, e.g., using logical data-
base SDF (G/L accounts), select Extras -> Dynamic selections. The
following tables are available:
     SKA1 G/L Account Master (Chart of Accounts)
     SKB1 G/L Account Master (Company Code)
     BSIS Accounting: Secondary Index for G/L Accounts <   Use for BUPLA
Table BSIS contains the BUPLA (Business place) field which can be
added to the dynamic selections for trans FBL3N (see note 310886 for
additional info).
Please perform the following steps to add the line item (BSIS-BUPLA)
field to dynamic selections:
1) Run trans SE36 using logical database SDF. Select Extras ->
    Selection views. Enter origin of view CUS. Click on Create.
2) Under Tables/Nodes, scroll down to table BSIS and double click on
    it. This will display the available fields from table BSIS below.
3) Under Functional groups, enter functional group ID / text:
    Functional groups
->   01 BSIS
4) Under Table fields/Node fields, enter functional group ID from
    step 3 to the left of the BUPLA field:
    Table fields/Node fields
-> 01 BUPLA            Business place
    Click on Save. Msg S3404 "Selection view saved" should appear.
5) Run trans FBL3N. Click on Dynamic selections -> BSIS. Double
    click on Business place. A popup box should appear allowing entry
    of a single business place value. Click on Multiple selection ->
    Ranges to enter business place range.
I hope above will resolve your issue.
Regards
Madhu M

How to Place a LOGO on Selection screen & Output list -OO ALV

Hi,
I was just wondering can we place a logo on standard Selection screen 1000?
And also on the Output list . I am using OO ABAP for my ALV.
regards
Praveen

Hi,
You cannot place a logo in your selection-screen.
But yes, you can place logos in your OO ALV.
data:       ws_c_logo      TYPE REF TO cl_dd_area.
                                                  "Instance for the logo
Split your document container for logo
   CALL METHOD wcl_docum->vertical_split
           EXPORTING split_area = wcl_docum
                     split_width = '70%'
           IMPORTING right_area = ws_c_logo.
then,
CALL METHOD ws_c_logo->add_picture
          EXPORTING picture_id = c_logo.
where:      c_logo TYPE sdydo_key VALUE 'CC0040' . "logo for co.code 0040
The image should be stored in your business document. You may use BDS_OBJECT_SAVE or BDS_BUSINESSDOCUMENT_CREATEF to store the image in the business document server and then retrieve in your ALV.
Regards
Subramanian

Technical names in Business Role selection screen

Hello,
When I log on to the WebUI I get the selection screen for the Business Roles (correct because I'm assigned to multiple).
But in the selection screen the Technical Names of the Business Role is hown too and I don't want to show these to the users.
So does anybody know how we can disable showing the technical names in the business role selection screen?
Can it be done in BSP crm_ui_start > Page Fragments > selectBusinessRole.htm Selection of Business Role? If so, what do i have to change?
Thnx!
Regards,
Joost

Hi Joost,
This technical information is the tooltip that is comming from the following line.
crm_ui_start > Page Fragments > selectBusinessRole.htm
at line no 29
tooltip="<%= profile_detail %>"
If you can remove this line then technical information, that comes up when you do mouse over the role description, wouldn't come.
Regards
Ajay

Problem with business place and section code in miro screen

hi experts,
i have done the following config. for validate the b/place and section code at the time of invoice and payment.
in prerequisite-com.code=l001 and (posting key=31 or posting key=29 or posting key=21
in check-business place=1001 and section code=1001
by this config. in t code fv60 and f-48 b/place and section code showing mandatory but in miro screen w/o b/place and section code system alowing to save the entry.
please suggest me where i am wrong and what to do next?
thanks and regards
konishko

hi
i have written the condition as follows
in prerequisite:bseg-bukrs=l001 and (bseg-bschl=31 or bseg-bschl=29 or bseg-bschl=21)
in check:bseg-bupla=1001 and bseg-secco=1001
by doing this in fv60 and f-48 screen is not allowing to post w/o b/place and section code but in miro screen system allow me to post w/o b/place . if i validate the miro screen then after giving the b/place it is not allowing me to post the same and giving the error message which i have created.
how to solve this problem?
please suggest me and please give me the steps.
regards
konishko

HOW CAN I PLACE 2 PUSHBUTTONS SIDE BY SIDE ON THE SELECTION-SCREEN?

i want to place 2 buttons but using my code, the other goes below the first. Can anyone help me?

hi,
write as below
selection-screen: pushbutton 10(30) text-003 user-command
clk1 modif id sg1,
pushbutton 50(50) text-004 user-command clk1
the push buttons appear in the same line.
reward if useful,
thanks and regards
Edited by: hema bobbili on May 23, 2008 6:58 AM

How can we place a F4 help in a parameter in selection screen

Hi,
How can we place a F4 help in a parameter in selection screen. Can we do add a Process 0n Value request similar to a module pool prg in stadard report program.
saji

Hello Saji,
Try below attached report.
Regards,
Naimesh.
Reward, if it is useful..!
REPORT ZTEST_NP_1.
DATA: HELPVAL1 LIKE HELP_VALUE OCCURS 0 WITH HEADER LINE .
DATA: VALUE_TAB     LIKE PDTASK-OTEXT OCCURS 2 WITH HEADER LINE.
DATA: VALUE         LIKE FEBMKA-BANKN,
      GIVEN_VALUE   LIKE HELP_INFO-FLDVALUE.
DATA: IT_T005T LIKE T005T OCCURS 0 WITH HEADER LINE,
      IT_T002T LIKE T002T OCCURS 0 WITH HEADER LINE.
SELECTION-SCREEN: BEGIN OF BLOCK BLK1 WITH FRAME TITLE ABC.
PARAMETERS:       P_SPRAS LIKE T002T-SPRAS,
                  P_LAND1 LIKE T005T-LAND1.
SELECTION-SCREEN: END   OF BLOCK BLK1.
INITIALIZATION.
ABC = 'Selection Criteria:'.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_LAND1.
PERFORM VALUE_REQUEST_LAND1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_SPRAS.
PERFORM VALUE_REQUEST_SPRAS.
*&      Form VALUE_REQUEST_land1
FORM VALUE_REQUEST_LAND1.
*---- Reading the Screen values.
DATA: LT_DYNPFIELDS LIKE DYNPREAD OCCURS 0 WITH HEADER LINE,
        LV_DYNAME     LIKE D020S-PROG,
        LV_DYNUMB     LIKE D020S-DNUM.
*-------Append field which you want to read from the screen
LV_DYNAME = SY-REPID.
LV_DYNUMB = SY-DYNNR.
LT_DYNPFIELDS-FIELDNAME = 'P_SPRAS'.
APPEND LT_DYNPFIELDS.
CALL FUNCTION 'DYNP_VALUES_READ'
       EXPORTING
            DYNAME     = LV_DYNAME
            DYNUMB     = LV_DYNUMB
       TABLES
            DYNPFIELDS = LT_DYNPFIELDS.
SELECT * FROM T005T
         INTO TABLE IT_T005T
         WHERE SPRAS = P_SPRAS.
    REFRESH: HELPVAL1, VALUE_TAB.
    CLEAR:   HELPVAL1, VALUE_TAB, GIVEN_VALUE, VALUE.
*---- Append field name for the columns in the help popup
    HELPVAL1-TABNAME    = 'T005T' .
    HELPVAL1-FIELDNAME = 'LAND1' .
    HELPVAL1-SELECTFLAG = 'X' . " will return the value on the screen
    APPEND HELPVAL1 .
    CLEAR HELPVAL1 .
    HELPVAL1-TABNAME    = 'T005T' .
    HELPVAL1-FIELDNAME = 'LANDX' .
    HELPVAL1-SELECTFLAG = ' ' .
    APPEND HELPVAL1 .
    CLEAR HELPVAL1 .
    LOOP AT IT_T005T.
      VALUE_TAB = IT_T005T-LAND1.
      APPEND VALUE_TAB.
      VALUE_TAB = IT_T005T-LANDX.
      APPEND VALUE_TAB.
    ENDLOOP.
    GIVEN_VALUE    = P_LAND1.
    CALL FUNCTION 'HELP_VALUES_GET_WITH_VALUE'
       EXPORTING
            DISPLAY      = SPACE
            GIVEN_VALUE = GIVEN_VALUE
       IMPORTING
            SELECT_VALUE = VALUE
       TABLES
            FIELDS       = HELPVAL1
            VALUETAB     = VALUE_TAB.
    IF NOT VALUE IS INITIAL.
      P_LAND1 = VALUE. " Assing value to the parameter
    ENDIF.
ENDFORM.                    " VALUE_REQUEST_land1
*&      Form VALUE_REQUEST_SPRAS
FORM VALUE_REQUEST_SPRAS.
REFRESH: HELPVAL1, VALUE_TAB.
CLEAR:   HELPVAL1, VALUE_TAB, GIVEN_VALUE, VALUE.
HELPVAL1-TABNAME    = 'T002T' .
HELPVAL1-FIELDNAME = 'SPRSL' .
HELPVAL1-SELECTFLAG = 'X' .
APPEND HELPVAL1 .
CLEAR HELPVAL1 .
HELPVAL1-TABNAME    = 'T002T' .
HELPVAL1-FIELDNAME = 'SPTXT' .
HELPVAL1-SELECTFLAG = ' ' .
APPEND HELPVAL1 .
CLEAR HELPVAL1 .
SELECT * FROM T002T
         INTO   TABLE IT_T002T
         WHERE SPRAS = SY-LANGU.
LOOP AT IT_T002T.
    VALUE_TAB = IT_T002T-SPRSL.
    APPEND VALUE_TAB.
    VALUE_TAB = IT_T002T-SPTXT.
    APPEND VALUE_TAB.
ENDLOOP.
GIVEN_VALUE    = P_SPRAS.
CALL FUNCTION 'HELP_VALUES_GET_WITH_VALUE'
       EXPORTING
          DISPLAY      = SPACE
          GIVEN_VALUE = GIVEN_VALUE
       IMPORTING
          SELECT_VALUE = VALUE
       TABLES
          FIELDS       = HELPVAL1
          VALUETAB     = VALUE_TAB.
IF NOT VALUE IS INITIAL.
    P_SPRAS = VALUE.
ENDIF.
ENDFORM.                    " VALUE_REQUEST_SPRAS

Dialog programming - How to place a select-option field in a dialog screen

Hi all,
In Dialog Programming, How to place a select-option field in a dialog screen.
Kindly give me some example code...
Thanks,
Jaffer Ali.S

hi Ali,
U can add select-options in ur module pool by using SELECTION-SCREEN BEGIN OF SCREEN <scrn> AS SUBSCREEN command.
check this link for reference.....
http://help.sap.com/saphelp_47x200/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/frameset.htm
Example Code :
DATA : ok_code TYPE sy-ucomm.
SELECTION-SCREEN BEGIN OF SCREEN 1010 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_rad1 RADIOBUTTON GROUP grp1 DEFAULT 'X',
            p_rad2 RADIOBUTTON GROUP grp1,
            p_rad3 RADIOBUTTON GROUP grp1.
SELECT-OPTIONS: s_matnr FOR mara-matnr,
                s_matkl FOR mara-matkl,
                s_mtart FOR mara-mtart.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN END OF SCREEN 1010.
START-OF-SELECTION.
CALL SCREEN 100.
*&      Module STATUS_0100 OUTPUT
MODULE status_0100 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
CALL SCREEN 1010 .
ENDMODULE.                    "status_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
      text
MODULE user_command_0100 INPUT.
CASE ok_code.
    WHEN 'EXIT'.
      LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
SCREEN 100 ****************
PROCESS BEFORE OUTPUT.
MODULE status_0100.
CALL SUBSCREEN sub_1010 INCLUDING sy-repid '1010'.
<b>***** where sub_1010 is name of sub-screen area</b>
PROCESS AFTER INPUT.
CALL SUBSCREEN sub_1010.
MODULE user_command_0100.
<<< REMOVED BY MODERATOR >>>
Harimanjesh AN
Edited by: Marcelo Ramos on Dec 17, 2008 7:54 PM

How to required Business Place and Section Code in FB60 screen

Dear Guru
Please guide me how to required Business Place and Section Code in FB60 screen. in SAP
Regards
Tapan Maity

Hi Tapan,
Theer are various discussion over this issue . You can apply validation specific to transaction code as well as on the document type.
Hope this would help you.
Regards
Pankaj P

Business place in fast entry screen

hi,
how to include business place in fast entry screen? Can any one suggest me on this.
govind.

HI,
give some idea for the area to be checked for enhancement.
govind.

How to place selection screen block adjacent to other block

hi all,
     I want a selection screen block side by side, is it possible
without using screen painter, if it is let me know.
Thanks & Regards
RK

Hai RK check the following syntax
CALL SELECTION-SCREEN dynnr
                      [STARTING AT col1 lin1
                      [ENDING   AT col2 lin2]]
                      [USING SELECTION-SET variant].
before this you need to create two screens

Business Place for document could not be determined

Hi,
When I am posting Remittance challan I am getting this following error,
"Business Place for document could not be determined".
Could any body please help me to solve this problem.
I maintained the following settings in system
1. T-Code: J_1IEWTNUMGR
UN04 SC04 194C 02
2. T-Code: J_1IEWTNUM
02 02
3. T-Code: J_1IEWTNO
Maintained Number ranges
I posted vendor document and I gave Business place and Section code also. Even After all the settings I am getting this problem. Please let me know is there any steps I missed are any thing I have to maintain in system.
Best Regards
Raj

Hi Pavan,
Thanks for you replay. I checked in table, data available in the table J_1IEWTNUMGR against Company code, Business place and Off Key.
One more question is whether we need to give Business place or Section code while creating TDS challan using J1INCHLN. It will appear like "Business Place/Section Code" in the screen. If I select from drop down It is taking Section code. Is it possible to change the logic from Section code to Business place.
Thanks & Regards
Raju.

How to haveour own titles/captions in selection screen & in column headings

we have SAP B1 2005 A, MS SQL 2005
though i am new to MSSQL/T-SQL programming, purely through lot of trials & errors i have learnt & managed to develop many reports/queries !
but, i am facing some problems : how to have our own captions/title for the options in selection screen & aso in reports/queries column headings.
e.g. :
for Customer Aging analysis, i would like to accept a set of 3 parameters (aging days) from the user. where the user may enter the values 30, 60 & 90 OR any other values.
i have the following codes for this purpose (considering my question's (over) size, only small portions of my program are given below)
declare @mdue1 int,
           @mdue2 int,
            @mdue3 int
set @mdue1 = [%1]
set @mdue2 = [%2]
set @mdue3 = [%3]
but, in the selection screen, the system displays "%1 Debit Amount   Greater than" as the caption & 0.00 as the default value. the same is the case for the other two parameters [%2] & [%3] also.
i tried defining the variable @mdue1 as smallint & also tinyint, but the result is the same.
how to have our own captions/title for the options in selection screen instead of the ones displayed by t-sql based on our SELECT statement.
how to have our own column headings, dynamically defined/coined using variables instead of hard coded columns headings (within quotes).
e.g. in the select statement, instead of defining a column as '<= 30 Days' = T0.due_1
i would like to get the number of days from the user, who may enter 30 or 40 or whatever.
i would like to display the value that the user entered in the column heading using a variable say @mcol1
declare @mcol1 varchar(10)
set @mcol1 = '<= 'convert(varchar(10), @mdue1)' Days'
SELECT T0.CardCode,@mcol1 = T0.due_1 from #CustAging T0
but, this ends up in error.
i have already searched the net for ebooks, articles, etc. for a solution to this problem, but till now, i could not find any addressing these problems.
i have just registered in this forum with a hope to get a solution. thanks a lot in advance.
Thanks & Regards,
Raghu Iyer
Place : Vapi, Gujarat, India

thanks a lot, lstvan.
i think, it i a good "trick" worth trying out.
well, i will now mark this question as answered, but still, if anyone has a direct solution "problem", please do share with us.
i am able to write queries (in fact, full fledged programs) in T-SQL & getting the desired output and for such a trivial thing i do not want to go for an add-on SDK module. but, considering the limitations of T-SQL and the complex requirements of real business world, i think, we have to go the .net way only.
regarding add-ons, i heard that add-ons will slow down SAP B1. is it true ?
Thanks & Regards,
Raghu iyer

Business Place in selection screen of FS10N/FAGLB03

Similar Messages

Maybe you are looking for