Business Place is not coming on Tax G/L line items

Hi,
I want Business Place in business place Field in line item in Tax G/L a/c at the time executing Tcodes-FBL3N and FS10N.Presently this field comes blank except in one plant out of 10.
what r the settings required for this.
Please suggest
Thanks

Hi
While Posting mention the Business Area .
Regards
Arun M

Similar Messages

Payroll Run TDS Business Place/Sec Code Updattion In FI Doc TDS Line Item

Hi Experts
Can any one please guide me how the tds section code will be picked up in payroll run for posting a FI document. Why because if business place / section code is not updated in FI Document Line Item Level system will not pick those line items in Tcode : J1INCHLN Execution.
How we have to go about this.
Please suggest me on this.
Thanks
Kiran

Hi,
Based on the Wage type.
Good Luck
Om
Reward it ,if helpful.

Business Place can not be determined - Withholding tax

hi Experts,
when i am in t code J1INMIS run then system show the all information about tax, but when i click on challan update then i fill the all information in CREATE REMITTANCE CHALLAN then one error appear there error is ( Business Place for document could not be determined ) and (Message no. 8I707) how to solve this error.
Thank You
Priya

Dear,
Please check if you have assigned Business place to section code in customization and also check if it exist into document. Now for TDS Business Place is not a madatory settings.
Additional Information.
Better practice is to create Business place identifier as same as the section code.
Regards,
Chintan Joshi.

Tax code P0 does not appear in any G/L line item

Hi,
I am using BAPI_ACC_DOCUMENT_POST to upload the AP/AR Journals. I have a scenario wherein for AP document type 'KA' both the line items are of vendor . One line item though has a special G/L indicator and a tax code to it.
When i execute the program I am geting an error that "Tax code P0 does not appear in any G/L line item".
Here in my case I do not have any G/L line items but both are vendor line items and one line item has a special G/L indicator.
Could anyone help me in solving it.
Thanks in advance.

Hi,
Check the long text of the message FF - 753 in SE93.
It describes the cause of this error and the required customising and solution.
Kindly check with your functional consultant for some inputs.
He might be able to help you identify the error.
Regards,
Ankur Parab

Withholding tax calculated by line item

Hi all,
I am trying to test the withholding tax for vendors. My question is, if the invoice has many line items, and not all line items are subject to withholding tax due to its transaction nature, is it possible to select which items are applicable for withholding tax and let the system calculates the withholding tax by the line items? If yes, how do i do that as my understanding is, the withholding tax is at header level.
Thanks.
Regards,

Hi
By default the system will calculate Withholding Tax for whole amount, if we want to change the value of Tax we have to manually change the Withholding Tax Base amount in the Withholding Tax tab of the Document Entry Screen and Change the Base amount to the amount for which the Withholding Tax has to be deducted then the system will calculate the Withholding Tax for the Base Value entered by us.
Regards
P Rajan

Tax column at line item level in VA01/VA02

Hello All,
I had a requirement to add the tax column at line item level for va01/VA02 transaction.
I modified the screen 4900 and added the VBAP-TAXM1 column to the item table control and made that column input enabled.
Now I had to calculate the TAX conditions based on the input in that tax column. None of the user exit is triggering when I change the values in this field, do I need to make any changes in the PAI of the 4900 screen in order to make the userexits trigger or am I missing anything?
Thanks & Regards,
SasiKiran.

Hi
Please, see SAP Note 862228 - Order reason for returns on item level. It is related with field AUGRU. Remember that it is a modification. I suggest you to add in addition data (for instance, SAP Note 209278 - Display of customer-specific fields in sales doc, SAP Note 302497 - Additional cust. fields not displayed in 'Additional data B', SAP Note 420546 - Additional data B and transaction variants in sales order and related notes).
I hope this helps you
Regards
Eduardo

Is it possible to have more than one Tax code per line item in Billing docu

Is it possible to have more than one Tax code per line item in Billing document ?

Hi,
I have a different perspective there.
If an item is applicable for two different taxes which are represented by two different tax condition types and these tax conditions are configured in the tax procedure, FTXP and so on....then these two condition records can have two different tax codes.
We actually have this scenario in EU now, where EU talks about service tax in 2010 apart from the normal VAT. So now we have MWST and ZWST(Say)
Now there are some materials which come with a service associated with it. So a service charge is also levied when the material is sold. So the material price will become applicable for VAT and the service charge becomes applicable for service tax. In this case, the tax classification of the customer will have two entries in sales orders updated in the fields VBAK-TAXK1 and VBAK-TAXK2 based on the sequence number of these condition types.
Now based on different tax classification of the customer, we have 2 different tax codes representing different %of tax.
Hope it helps

PO Release Strategy not changed after deletion of few line items with less

Subject : PO Release Strategy not changed after deletion of few line items with less Total PO
Dear Friends
We have issue with PO Release strategy. We have created the PO. with release strategy with multiple approvers. After approval of first approval manager , one of the PO line item got deleted and Total PO value is reduced . The new PO value should have changed the PO release strategy. But it is not changed. Old release strategy only showing in the PO which is wrong.
Details of the PO
PO no 4500000123 with 5 line items Total PO value : 100,000 USD Release strategy : AB
PO line item 5 deleted. Now total PO value changed to 50,000 USD and the PO release strategy should have been changed to AA but not changed. Still showing PO release strategy AB only.
Are there any OSS notes available to correct his bug.
Please let me know if you need more details
Thanks in Advance
Thanks
MVS

Hi,
release indicators change it to 4.It may works. Please explore to all 6 indicators..........
i.e,
1-cannot be changed
2-changable,no new determination of strategy
3-changable,new release in case of strategy
4-changable,new release in case of strategy or value change
5-changable,new release if new strategy/outputted
6-changable,new release if new strategy or value changed/ outputted......
And check Characteristic description and value in Classification of Release strategies ........
I hope this will help you. Thanking you.
Regards,
Venkat.

Tax amount from line items

Presently developing a report for which want Vendor Invoice line item tax details along with other details like material no, quantity.
For example, a MIRO invoice, have 2 lines having different materials. On what fields do I link BSEG and BSET (apart from BUKRS + BELNR + GJAHR) so that I will get tax amount for the individual line items.
If i use FM CALCULATE_TAX_FROM_NET_AMOUNT or CALCULATE_TAX_ITEM
it provides tax for each line item but how to link this BSET line item detail to BSEG from where want to read material no and quantity information.
BKPF and BSET on BUKRS + BELNR + GJAHR give only consolidated tax amount. But requirement is to have individual line details.
kindly resolve.
anya

Hey Anya,
I am facing the exact same issue. Could you share the solution please.
Thanks,
Shobhit

Price is not changing in sales order in line item

dear all.,
price is not changing in sales order on line item,error comes "CHECK ORDER STRUCTURE.
Regards,
Praveen

Dear
You can go into VA03 --> Menu --> Environment --> Partner --> display credit account (if the data is maintained, than the system springs into FD33). Another way is to check if the sales order type is assigned to credit management in the transaction OVAK (should be D for aut. credit management).
Did you enter the pricing date , prcing condition and press enter , so that it should pick the correct price?
Check this and come back
Regards
JH

TDS INDIA - error "business place could not be determined"

Hi all Indian SAP Gurus!
I am from Sweden and trying to configure Indian TDS.
I have succeeded to create a vendor invoice in fb60, entering business place and section code and the posting looks all good so far.
I have created a business place called HO, a section code called SC01 and allocated them to my company code 2200.
But when I am trying to run transction J1INCHLN I get the following error message (8i707):
"Business place for document could not be determined".
I have read a lots of threads regarding this but I suppose I have misunderstood something.
When I look at the document in fb03 I can see the business place on the posting!
I don't know if I have understood all about the number ranges correctly.
Please confirm the following settings:
J_1IEWTNUMGR:
- 194C numgr 55
-194I numgr 56
194j numgr 57
J_1IEWTNUM
num group 55 - internal group 55
num group 56 - internal group 56
num group 57 - internal group 57
J_1IEWTNO - get error message "The maintenance dialog for J_1IEWTNO is incomplete or not defined". Instead this is maintained in transaction JI1NNUMBER where I allocated intervalls of number to number ranges:
55: 0055000000-0055999999
56: 0056000000-0056999999
57:0057000000-0057999999
J_1I_SECCODE: Section code (one section code)
V_SECCODE: HO (one business place)
SPRO => EWT=>Postngs=>India=> Withholding tax certificate customer vendor => Manintain groups and SAP Script forms:
2200     SC01     194C           J_1IEWT_CERT     55
2200     SC01     194I           J_1IEWT_CERT     56
2200     SC01     194J           J_1IEWT_CERT     57
Notice that I have not entered any section type.
SPRO => EWT=>Postngs=>India=> Withholding tax certificate customer vendor => Assign number ranges to number groups:
num group 55 - internal group 55
num group 56 - internal group 56
num group 57 - internal group 57
SPRO => EWT=>Postngs=>India=> Withholding tax certificate customer vendor => Manintain number ranges:
55: 0055000000-0055999999
56: 0056000000-0056999999
57:0057000000-0057999999
I would very much appreciate if ypu could help me with this! I will give you a lot of points!
Thank you very much in advance!!!!
Best regards,
ÅSA

Hi!
I have now deactivated as you said:
-then reversed all invoices in fb60
-then activated
-posted a new invoice in fb60
But still I have the same error message....
More information: When I go to transaction j1inpp to update business place information in FI document.. When trying to see the alternatives of business place and sector code I see our business place but canät see any sector codes!! How come? I go to table V_seccode and there I see my sector code???? Strange!!!
I have now created a new section code and deleted the old one. And made same settings as before. I have also posted a vednor invoice. But still the same message...
Edited by: asafo364 on Apr 21, 2010 1:39 PM

Tax Amount(CST) is not coming in tax field in sales order

Dear Friends,
I have created a sales order and in that sceanrio CST is applicable. In sales order the CST amount is coming but my problem is that its not coming in total sales order value.
In my sales order, value is like below mention: -
Pr00 1000
CST 4.00
while I select the line item and go to condition tab its showing both value but while i see the upside field net value and tax field in net value field 1000 is coming and tax value field showing zero value instead of 4.00
I have mentioned the settings in condition type for CST
Cond. class D Taxes
Calculat.type A Percentage
Cond.category D Tax
and maintained the condition record against Tax code defineed for CST 4%
Please advice me what could be the reason of this problem and kindly give the solution.
Regards
SV

Hi,
Re-check your pricing procedure maintanance, whether relevant routines maintained in "Requirement(10)" & "Alt.Condition Base value(16)"?
if its maintained check in V/06- cond type details of your tax cond type- Exclusion field is "Blank" & in Condition records too.
Regards,
Reazuddin MD

The correct purchasing group is not being determined in the SC line item

Dear all,
I have a problem in that for some reason, when a shopping text line item is added to the shopping cart, the wrong purchasing group is determined. Further more when you look in the basic data section they is a drop down against the purchasing group field listing all pruchasing groups setup in the org plan via PPOMA_BBP.
This means that the requisitioner can change the purchasing group to any one even the one that is not relevant to his or her Purchasing Organisation. This of cause is not right because if the requisitioner is allowed to change the P/Grp, the wrong buyer may end up recieving the buyer completion work item.
What is causing this?
We have uniquely assigned P/Orgs to P/Grps and assigned resposiibility of P/GRPS to one unique ORg unit (company).
for example, a suppose product Category 1234567 is assigned to P/GRP 100 & P/GRP 100 is assigned to P/ORG 1000 and the P/GRP responsibility is set to Org unit(company) 1000, The requisition "sits" under an orgunit linked to company 1000.
If a requisitioner creates a text item and assigns product category 1234567, when the item is added to the shopping cart , I expect to see that the followig:
1. The Company code(CC)should be 1000 (This is happening)
2. The P/org should be 1000(This is happending)
3. The Plant sssignment is correct
4. The p/grp is worong. It appear that the first P/Grp is assigned plus a drop down listing all p/grps created for all purchasing P/Orgs.
Regards,
Grace

Yann,
Yes , we have (need to have)set 2 purchasing groups with the responsibility of the same product category. We have to do this because in our organisation, individual company purchasing organisations have same responsibilities to purchase similar products.
Please note that we have a classic scenario implementation. SRM 4, Server 5.
The business requirement and settings in the org plan is for example:
P/Grp 100 has the reponsibility to procure Prod cats LAM001 to LAM010 via its assigned P/org 1000 which is linked to own company 1000 and P/grp 200 also has the reponsibility to procure Prod cats LAM001 to LAM010 via its assigned P/org 2000 which is linked to own company 2000.
Please note that thr buyer responsible for p/grp 100 & 200 are the same and will be the same for similar product cats across the organisation as a whole. Its just the SRM does not allow you in the orgplan to assign the same p/grp to multiple p/orgs, we had to double up on the p/grps.
Also when a requisitioner who sits under company 2000 chooses a product cat 12345 if creating a SC text line, we DO NOT WANT the requisitioner to change the assigned p/grp.We want it defaulted to 200 (based on the org plan setting I have described above) and fixed(greyedout)
when thr line item viewed in the basic data section.
Do you think that because we have set the prod cat range LAM001 to LAM010, which is an alphanumeric product cat range, that could also be the reason for the dropdown listing all orplan p/grps even ones that do not have the product cat LAM001 to LAM010 in its responsubility assignments?
If you are saying that the system does not know which p/grp to pick, why its it displaying all "unrelated" p/rps in the dropdown. I atlest expect to see two p/grps in the dropdown 100 & 200, because only these two p/grps have been set with product cat responsibility for LAM001 to LAM010 in our org plan.
Also if you are saying that is the way SRM was designed to work (which may be the case!!!) how then can we set the org plan to meet our the purchasing org/purchasing grp /prod cat responsibility requirements I have described above?
Regards,
Grace

MM: PO Not Picking up PR Having Multiple Line Items

Hi All,
When Creating PO with Reference to PR Having multiple line items, not picking up the line items and also the vendor and also the where in we have to select input tax code.
CASE1: Created PR 760001340 with single line item and also could able to create PO.
Case2: Created PR 760001341 with multiple line items, When creating PO with reference to PR the line items and Vendor are not picking Up.
Plz. Advise a solution.
Thanks in Advance.....
Regards
Sudheer

HI SHWN,
Thanks for prompt response.
ERROR Message: When referencing a requisition, please also enter a requisition item no.
Regards
Sudheer

Individual taxes for PO line items

Hi experts,
Is it possible to add individual taxes for line items for PO ?
is it possible for set different taxes for different materials from same vendor ?
At creation of PO user does not know the frieght charge, in this case what is the better way to resolve the problem ?
Thanks & Regards

Hi,
Is it possible to add individual taxes for line items for PO ?
Yes...Tax code and jurisdiction code is item specific...If you are not familiar with taxation, please leave the responsibility to the tax consultant in your project...It is a very specialized area and legal issues can arise if not done properly...of course, you can learn but a matter of time...
is it possible for set different taxes for different materials from same vendor ?
yes...this is also pretty much standard
At creation of PO user does not know the frieght charge, in this case what is the better way to resolve the problem ?
Freight Provisions is a standard SAP solution...they can put expected amount...system will automatically take care of actuals...read standard SAP's documentation for Freight Provisions and handling freight in purchase...
Hope, this helps! Reward if useful

Business Place is not coming on Tax G/L line items

Similar Messages

Maybe you are looking for