Business process 300900 is not yet planned in version 0/2008.

Hi Friends,
I am doing easy cost planning---> execution services for Internal activity allocation but when I am posting the document getting the below error.
How can I overcome this.Pointers will be rewarded.
Business process 300900 is not yet planned in version 0/2008.
Message no. BK505
Diagnosis
You did not carry out planning for business process 300900 in fiscal
    year 2008, version 0.
Because process 300900 also has no active actual price indicator, you
    cannot carry our actual allocation.
Procedure
In order to allocate to the business process in actual:
o   Carry out activity planning for the process
o   Alternatively, set the actual indicator for the process so that the
        R/3 System carries out revaluation in actual
Carry out planning and maintenance of the price indicator in the
Activity-Based Costing component.
Regards

Hi Amit,
1. Check the master data settings of process 300900 in CP02. In the "Allocation" tab. all the necessory settings are maintained such as process diriver and defalut values like cost element, actvity allocation (should be "1" i.e. manual entry in your case)
2. Maintain the planning data for this business process through CP26 for year 2008.
Regards

Similar Messages

Business process is not yet planned in version 0/2010

HI,
In Timesheet entry in CAT2, i am facing the following error
Business process EPI0001 is not yet planned in version 0/2010
Please help to solve it.

HI,
the message means that there are is no activity / price planned for fiscal year 2010 (thus your time entry in CAT2 can not be valuated).
Check who is responsible for the missing entry in CP26, maybe the business process is outdated and there is a new one to be used?
best regards, Christian

Trying to reinstall Acrobat Pro X from disc onto win 8.1 system. (Previous installation got corrupted) Continually getting message 'Acrobat has detected another process which has not yet completed-'. Have now closed system both cold (full shutdown) and wa

Trying to reinstall Acrobat Pro X from disc onto win 8.1 system. (Previous installation got corrupted) Continually getting message ‘Acrobat has detected another process which has not yet completed…’. Have now closed system both cold (full shutdown) and warm (restart) over 10 times. Every time I go to reinstall I get message.

I would run http://labs.adobe.com/downloads/acrobatcleaner.html and delete any Acrobat folders that have been created, then try again. Be sure to log in as the administrator and disable anti-virus when you have problems like this.

The difference among business process depicted in the billing plan?

I dont know the difference following business process in billing plan.
business process 1. set down payments and resource-related billing document.
business process 2. down payments and set resource-related billing documnet.
I dont know how to create this two business process in billing plan. meanwhile, I dont understand clearly the word set
thank you
Edited by: Yongguo Li on Mar 2, 2008 6:59 AM

Hi,
Agency Business Process
http://help.sap.com/saphelp_crm60/helpdata/en/15/016c07ab304f8a9ffeb3081f2103da/frameset.htm
Kapil

Business Process Graphics are not coming in SOLMAN 3.2

Hi,
In my solman system graphics for business processes are not coming.I am getting an error message "The page cannot be found".
The link is as follows...
http://itssvr.tsm.com:8000/sap/bc/solman/defaultUser/graphic/solmangraphic.htm?sap-language=E&sap-client=100
&_appl=SOLAR&_cmd=READ&_cacheid=032E57B2E
6FDB14188B4313543C5393E
I have checked sap-bc-solman-defaultuser-graphicdata is activated.
Please suggest.
Thanks & Regards
Mrutyunjay

hI,
Go to vtlf copy controls in item data vbrk/vbrp give 001 try this it my work out.
Best regards,
venkataswamy.y

Business Process Step properties not loading

Hi All,
I believe the problem is apparent enough from the topic itself . After i create a Business process and then decide upon the steps and later on when i try to load the properties of the individual steps its not getting loaded. i belive its not the problem with the momory sizing of the server as we have another server with much lower memory working well.
any sort of suggestions ... folks???
regards,
Rahul

Rahul,
This problem is because the Metadat has nt been imported correct.
Ask your BASIS team to reimport the SAP Basis SWCV corresponding to your SP level in the IR .
This would do the trick.
Regards
Bhavesh

Arrived in BW Processing: Data packet not yet processed

Hello Gurus,
Data is being loaded from export datasource (8RL*****) ti 2 data targets
The overall QM status is red (says processing is overdue)
The details tab shows
Extraction: Error occurred
Transfer(IDoc and TRFC): Error occurred
Processing (Data packet): Error occurred
   -- Transfer rule: Error occurred
     Bewegungsdaten received.Processing being started
     Message missing(35676 records) : Transfer rule finished
Update rule (0 records):Missing messages
Update(0 new/0 changed): Missing message
Processing end: Missing message
I checked the LUW in SM58 but didnt find anything.
I checked infosource (PSA) - one request is in RED, but when i check the data in PSA there are no errors.
What should I do in this case?
What might be the excat error.
Kindly inform.
Regards,
NIKEKAB

Hi,
Check the DataSource in RSA3, if it is working fine and able to see the data in RSA3, there is no problem in DS level, then checl the Mappings and any routines in BW for that DS, if this is also fine then check the below options.
See Dumps in ST22, SM21 also.
Check RFC Connection between ECC and BW systems, i.e. RSA1-->Source System->Right Click on Source system and Check.
You must have the following profiles to BWREMOTE or ALEREMOTE users.So add it. Bcoz either of these two users will use in background to get extract the data from ECC, so add these profiels in BW.
S_BI-WHM_RFC, S_BI-WHM_SPC, S_BI-WX_RFC
And also check the following things.
1.Connections from BW to ECC and ECC to BW in SM59
2.Check Port,Partner Profiles,and Message Types in WE20 in ECC & BW.
3.Check Dumps in ST22, and SM21.
4.If Idocs are stuck i.e see the OLTP Idoc numbers in RSMO Screen in (BW) detials tab see in bottom, you can see OLTP Idoc number and take the Idoc numbers and then goto to ECC see the status in WE05 or WE02, if error then check the log else goto to BD87 in ECC and give the Idoc numbers and execute manually and see in RSMO and refresh.
5.Check the LUWs struck in SM58,User Name = * (star) and run it and see Strucked LUWs and select our LUW and execute manually and see in RSMO in BW.
See in SDN
Re: Loading error in the production system
Thanks
Reddy

Data packet not yet processing in ODS load??

Hi all,
I got an error when I loaded data from IS to the ODS. Can someone let me know why and how to resolve it. Thank you in advance.
Here is the error message in the monitor:
Warning: data packet 1 & 2 arrived BW; processing: data packet not yet processing.
(No data packet numbers could be determined for request REQU_77H7ERP54VXW5PZZP5J6DYKP7)
Processing end:
transfer rules (0 record): missing message
Update PSA (0 record): messing messages
Update rules (0 record): messging messages

John,
I dont think its space problem.In st22 go with detail note.
What happend, how to correct it.Will help you to solve the problem.
Check this note 613440 also.
Note : 647125
Symptom
A DYNPRO_FIELD_CONVERSION dump occurs on screen 450 of the RSM1 function group (saplrsm1).
Other terms
DYNPRO_FIELD_CONVERSION, 450, SAPLRSM1
Reason and Prerequisites
This is caused by a program error.
The screen contains unused, hidden fields/screen elements that are too small for the screen check that was intensified with the current Basis patch (kernel patch 880). These fields originate in the 4.0B period of BW 1.0 and are never used.
Solution
Depending on your BW system release, you must solve the problem as follows:
BW 3.0B
 ImportSupport Package 14 for 3.0B (BW 3.0B Patch 14 or SAPKW30B14) into your BW system. This Support Package will be available when note 571695 with the short text,"SAPBWNews BW 3.0B Support Package 14", which describes this Support Package in more detail, is released for customers.
BW 3.1 Content
 ImportSupport Package 8 for 3.1 Content (BW 3.10 Patch 08 or SAPKW31008) into your BW system.This Support Package will be availablewhen note 571743 with the short text, "SAPBWNews BW 3.1 Content Support Package 08", is released for customers.
The dump occurs with the invisible G_NEW_DATUM date field on the bottom right of the screen, which is only 1 byte long and can be deleted.
You can delete the following unused fields/screen elements:
%A_G_NEW_NOW Selectionfield group
G_NEW_ZEIT Input/output field
G_NEW_UNAME Input/output field
G_NEW_DATUM Input/output field
%#AUTOTEXT021 Text field
G_NEW_NOW Selection button
G_NEW_BATCH Selection button
You can delete these fields/screen elements because they are not used anywhere.
This deletion does not cause any problems.
After you delete the fields/screen elements, you must also delete the following rows in the flow logic in screen 450:
FIELD G_NEW_DATUM MODULE DOKU_NEW_DATUM.
FIELD G_NEW_ZEIT MODULE DOKU_NEW_ZEIT.
The function group is then syntactically correct.
Unfortunately, we cannot provide an advance correction.
The aforementioned notes may already be available to provide information in advance of the Support Package release.However, the short text will still contains the words "preliminary version" in this case.
For more information on BW Support Packages, see note 110934.
Thanks
Ram

Business Partner not yet been released

Hello Experts
I'm getting an error when i try to post an Financial entry to a business partner.
"Business partner US10 has not yet been released"
Please suggest what needs to be done and how?
Best Regards
Abishay Solomon

Hello Gracia,
Gracias for the reply, i checked the master record of the business partner in T-code BP, under General Role > Status. The Field Not Released in not enabled. Which mean that the Business partner can be used for posting.
Please confirm if there are any other role i need to check for this field.
Best Regards
Abishay Solomon

Business Process Monitering

Hi,
 My company has decided to implement BPM (Business Process Monitering). Can we implement BPM for the Template Project.
 What is the difference between "Solution" and "Template project"? Please provide me helpful answers.
Thanks in advance,
Sreekala.

Hi Sreekala
In Solution Manager, we have 2 different areas. One is project and another one is solution.
In both area, we can maintain business process. And we can also copy existing business process from different sources
(Business Process Repository, Project, Solution).
<Project is more used for implementation and test scenario. Operation is used for operation scenario like busines process monitoring>
So if you have something in project side (template project), you can copy existing processes into solution. And then
you can configure business process monitoring
(remember, business process monitoring uses business process in solution. not project side).
In case, you do not have anything yet, you can also try template BPMon setting that is avaialble in service market place.
It contains important application monitor (transactional document monitor).
If you are enterprise support contract or max attention contract and your SAP backend system is already go live,
I recommend you to take Business Process Analysis service to have insight of you backend system.
Then it become much clear where to start and how the tool can provide additional benefit.
(in more detail, contact SAP Support Advisory center)
I list up some important information sources. So please take a look at link below.
1)FAQ
http://wiki.sdn.sap.com/wiki/display/SM/FAQBusinessProcess+Monitoring
One of topic is about the project. So you can get some information in here
>"Can business processes from the project part (SOLAR01) be reused for Business Process Monitoring? "
2)BPMon functional scope
More detail info about BPMon.
/people/volker.vongloeden/blog/2009/07/23/functional-scope-of-business-process-monitoring-in-sap-solution-manager
3)BPMon template
About BPMon template
/people/volker.vongloeden/blog/2009/07/29/business-process-monitoring--template-configuration-available-for-download
4)BPMon setup guide and general introduction
Technical information
http://service.sap.com/BPM --> Media Library --> Technical Information (contains configuration guides)
 -->Customer Information (contains overview and avaialble monitor info)
Best Regards
Keiji Mishima

How to control the Business Processes of System Status in Proj. Def.?

Dear Experts,
When a Proj. Def. is in "Business Complete" System Status (CLSD), I would like to control no data is allowed to be changed, except undo the CLSD.
In SPRO, I could onlly fine the similar setting in WBS status profile, but could not find system status profile for me to define and set which business processes is/are not allowed.
Is there anyone know how to do so please?
Thanks & regards,
James Chan

Dear Ivanna,
Really thanks for your swift reply.
In my system, when a Proj. Def. is in "CLSD" status, many of the fields are not grey-off for display only.
Instead, most of the fields are allowed to change.
In CJ20N, when I check on the "Transaction Analysis" of a project's status after "CLSD", I can see the "Create Change Document" is "Allowed".
Is that the cause why most of the fields are allowed to change?
How can I make it as "forbidden"?
Thanks & regards,
James Chan

Business Process Monitoring: restrict authorization to confirm alerts

Hello Experts,
I am working with Solution Manager's Business Process Monitoring and I am now facing these questions regarding roles and authorizations to allow/forbid alert confirmation:
- What is the authorization mechanism behind alert confirmation in BPM? Is a specific authorization object involved when pressing the button "Confirm selected"?
- Is it possible to adjust roles (if no standard role is available) in order to have, for example,
--Role1: give users the authorizations to walk through DSWP transaction, see business processes' alerts and confirm them
--Role2: give users the authorizations to walk through DSWP transaction, see business processes' alerts but NOT allow them to confirm any alert?
Our Solution Manager version:
SAP EHP 1 for SAP Solution Manager 7.0 (SP22)
ST-PI 2008_1_700 level2
ST-SER 701_2008_2 level 6
ST-A/PI 01M_CRM570
I hope I managed to explain my doubts properly; any help will be very appreciated.
Thanks in advance for your support,
best regards
Paolo

Hello Paolo,
it is the first time that I hear that request. Can you explain what your use case is? Why would you allow some users to see and analyze alerts but do not let them confirm the alerts if the problem is solved?
As the user/date/time is logged if somebody confirms you have the transaparency who confirmed which alert at what point of time.
I think that currently no such split in authorizations is supported but perhaps you can find something in the securtiy guide.
Best Regards
Volker

Business Process Management - End-to-End Analysis and Performance KPI's

Hello,
I am from WB and were looking to expand our footprint with Business Process Monitoring.
For critical business processes (order to cash, release to accounting, procure to pay; create shopping cart, etc.) how can be map and determine for the business units the expected run times as well as capturing / reporting historical trend analysis; looking at from a company business process level and not an SAP transaction level.
We were disappointed that we were unable to find this detailed functionality in SolMan (dashboards, metrics, customizable reports, etc.) that could tell us how long a WB business process takes to execute form start to finish.
Does anyone have any info as to if NetWeaver BPM can capture and trend the complete A-Z run times of a Business Process?
Iu2019m I missing something here?! I would think something this basic would automatically be a part of SolMan BPM Monitoringu2026
Appreciate all and any feedback.
Thanks!
Bruce L.
Warner Bros. Pictures, Burbank Calif.

Hi Bruce,
You can find many of the Process Analytics capabilities in NW BPM 7.2 release in this How-to Webinar
FEATURED EVENTS
Here you can see the Process Analytics related documentation
http://help.sap.com/saphelp_nwce72/helpdata/en/60/794d3f1e5a4443b5f714b28f6f5fa1/frameset.htm
Here you can find what data is exposed within the BPM specific BI content http://help.sap.com/saphelp_nw70/helpdata/en/ec/d897e16ccd4efd951a5fe708734bd3/frameset.htm
Best regards,
Radost

Time effort to implement Business Process Monitoring

hi,
if one company want to utilize Business Process Monitoring and implement it:
1). what are the Prerequisite
2). if the Prerequisite are met and we come to BPMon part how long it would take to implement one Scenario.
3). any document or links or hints for BPMon Best Practice?
Regards

Hi Volker,
This comment was part of document - Business Process Monitoring Set-up and User Guideline for Release ST 4.0 and ST-SER 700_2007_1.
3 Prerequisites for Business Process Monitoring
Business Process Monitoring is not just activated by pressing a button in the SAP Solution Manager and
therefore the configuration of Business Process Monitoring is currently not intended as a customer selfservice.
Instead, the procedure to set up Business Process Monitoring in the SAP Solution Manager is rather
realized by the delivery of the SAP Solution Management Optimization (SMO) Service for Business
Process Management due to the complex nature of the overall configuration of Business Process Monitoring.
However, it is possible (but not recommended) for customers to configure Business Process Monitoring by
themselves without any guidance of SAP.
Thanks.
Mani

Business Process Blueprinting Tool (BPB) Publish Error - Solution Manager 7.1 SP10

Hello SCN members!
The company where I work recently implemented the SAP Solution Manager 7.1 SP10 and now we are trying to learn how to use the SAP Business Process Blueprinting (BPB) Tool to design all enterprise processes inside it.
I followed all the steps of the official BPB installation guide and from another BPB discussion (http://scn.sap.com/thread/3258935) but the tool is not working properly. Some relevant points are:
I can create and publish Business Scenarios but can’t do the same with Business Processes
Business Scenario Created and Published:
Business Process created but not published, returning a connection error:
I don’t understand why the tool works for the Business Scenario level but not for the Business Process level. Could anyone help?
The log details are:
traceOutput.0.log
[EXCEPTION] com.sap.bpl.common.exception.BPLInternalServerErrorException: Could not establish connection with server at com.sap.bpl.soco.conn.impl.SoCoConnection.isOperationSuccessful(SoCoConnection.java:98) at com.sap.bpl.soco.conn.impl.SoCoConnection.publish(SoCoConnection.java:70) at com.sap.bpl.ral.resourceaccess.impl.GenericResourceAccess.publish(GenericResourceAccess.java:288) at com.sap.bpl.ebb.transaction.impl.TransactionManager.publish(TransactionManager.java:109) at com.sap.bpl.ebb.transaction.ui.dialogs.PublishPresentationModel.okPressed(PublishPresentationModel.java:130) at com.sap.bpl.ebb.transaction.ui.dialogs.PublishDialog.okPressed(PublishDialog.java:53) at com.sap.bpl.ebb.transaction.ui.dialogs.PublishAndRevertDialog.publishButtonPressed(PublishAndRevertDialog.java:267) at com.sap.bpl.ebb.transaction.ui.dialogs.PublishAndRevertDialog.access$000(PublishAndRevertDialog.java:49) at com.sap.bpl.ebb.transaction.ui.dialogs.PublishAndRevertDialog$2.widgetSelected(PublishAndRevertDialog.java:245) at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:228) at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003) at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3910) at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3503) at org.eclipse.jface.window.Window.runEventLoop(Window.java:825) at org.eclipse.jface.window.Window.open(Window.java:801) at com.sap.bpl.ebb.transaction.ui.handlers.PublishButtonHandler.publish(PublishButtonHandler.java:156) at com.sap.bpl.ebb.transaction.ui.handlers.PublishButtonHandler.execute(PublishButtonHandler.java:107) at org.eclipse.ui.internal.handlers.HandlerProxy.execute(HandlerProxy.java:294) at org.eclipse.core.commands.Command.executeWithChecks(Command.java:476) at org.eclipse.core.commands.ParameterizedCommand.executeWithChecks(ParameterizedCommand.java:508) at org.eclipse.ui.internal.handlers.HandlerService.executeCommand(HandlerService.java:169) at org.eclipse.ui.internal.handlers.SlaveHandlerService.executeCommand(SlaveHandlerService.java:241) at org.eclipse.ui.menus.CommandContributionItem.handleWidgetSelection(CommandContributionItem.java:770) at org.eclipse.ui.menus.CommandContributionItem.access$10(CommandContributionItem.java:756) at org.eclipse.ui.menus.CommandContributionItem$5.handleEvent(CommandContributionItem.java:746) at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003) at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3910) at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3503) at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2405) at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2369) at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2221) at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:500) at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332) at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:493) at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149) at com.sap.bpl.ebb.EBBApplication.start(EBBApplication.java:19) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514) at org.eclipse.equinox.launcher.Main.run(Main.java:1311)
The Palette and Standard Shapes are showing just a few options.
Are these the standard design objects or some are missing?
Thank you in advance for the answers!
Best Regards,
Vitor Soutinho

Hello SCN members!
I solved both of my problems in BPB tool and would like to share with the community the solution.
Basically I recriated both logical ports in soamanager:
LP_SOCO_SOLAR
LP_SMSY
This solved all my problems detected in the tool.
Thanks again for the suggestions showed!
Best Regards,
Vitor Soutinho

Business process 300900 is not yet planned in version 0/2008.

Similar Messages

Maybe you are looking for