Business process engine, Integration engine, and Adapter engine

can you differentiate Business process engine(BPE), Integration engine (IE), and Adapter engine

hi,
sure we can
but so can you - just type each of those in google
and you will find:
1. short
2. long
descriptions of all those
in google type also site:sap.com at the end
this will help you much more then our replies
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Similar Messages

How to change connection port between INTEGRATION SERVER and Adapter Engine

Hi,
I have scenario that in the productions server we are using SAP web dispatcher to connect to Adapter Engine for example the port is 60000.
So when we copy this server to DR environment the webdispatcher is not there. is that any way to change the all connection port between IS and Adapter from 60000 back to original port 50000 ?
Please advise ?
Thank You and Regards
Fernand

HI,
The waiting status is because of Message Queue is in wiating status. This may be because of overload of the messages, or may be your receiver systems is not ready etc.
SO go to SMQ2 and check the status of the queues.
Also have a look into this blog-
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically

Why I can see this messages only in the integration server?
>>>If message reachs the Adapter engine, you can see in the Adapter monitor. In your case, message is still there in the Integration Engine. Once the queues are cleared it will reach the Adapter engine, so you can monitor it in the adapter engine
Regards,
Moorthy

Webinar:SAP NetWeaver Process Integration u2013 Advanced Adapter Engine in PI 7

+Please Note: This webinar is aimed at consultants, Patners and Customers in APJ Region and is scheduled at 2.00 - 3.00 p.m. Singapore Time (UTC +8)+
Dear valued SAP Experts,
Next SAP Intelligence Platform & NetWeaver RIG Expert Call Session will take place on Tuesday, September 1. The SAP Intelligence Platform & NetWeaver RIG Expert Call Sessions are designed to support consultants, partners and customers during their implementation projects. The sessions cover all different aspects of SAP NetWeaver and are aimed at experts, thus provide knowledge which is not available via standard training courses. The session duration is typically 60min and includes questions and answers.
Tuesday, September 1, 2009:
SAP NetWeaver Process Integration u2013 Advanced Adapter Engine in PI 7.1 EHP1
Time: 2.00 - 3.00 p.m. Singapore Time (UTC +8)
This event will feature Charu Goel with the SAP Intelligence Platform & NetWeaver Regional Implementation Group. Charu provides the following abstract:
With PI 7.1 Enhancement pack 1, we continuously thrive to bring in advancements in AAE. In this APJ expert call, we talk about the much awaited capability of IDOC packaging along with the enhancements in JMS. You will learn about the interaction between the AAE and ABAP stack, new enhancements on the JDBC adapter and overall improvements in the technical adapters available with PI 7.1 EHP1.
For meeting and Dial-in detail please register [here|http://www.surveymonkey.com/s.aspx?sm=qkBfQCM5FM_2f_2b4O0ihVpFRw_3d_3d]
Thanks & Best Regards,
Sarma Sishta

Hi,
This was one of the good session...
Especially the features such as;
-- TCP/IP connection control with JMS adapters
-- Empty file Handling
-- Set the various Attributes for Mail attachments via dynamic configuration (intially only subject line was possible)
-- Message Prioritization
-- single IDOC Ack for IDOC Packaging
-- IDOC packaging
-- and many more........................
Even the future indicatioon of IDOC J2EE based adapter will provide new direction to the existion IDOC related scenarios..
One thing that was changed in IDOC packaging is to control it via Sender Communication channel...intially we were doing it either via ECC system or with t-code "idxpw"
Its almost in same way...but from J2EE based adapter perceptive IDOC packaging will be available with Java stack...and will no need to depend only ABAp stack for this feature.
Thanks
Swarup

No Integration Server under Adapter Engine at Communication Channel

Hello all,
This is new PI7.0 install.
I configured a file Adapter communication channel for an Integration Scenario.
At field "Adapter Engine" under Parameters tap I am not able to select the Integration Server.
Pull down menu is empty.
I did sxmb_adm and blog 6077 that got "Integration Server" in file adapter. Later to that file to file scenario worked yesterday. However after java+abap stack complete restart (to cleanup unwanted manually created business system of type WEB AS ABAP) the problem came back today.
I repeated again same blog /people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory   sxmb_adm, sldcheck, rz70 all looks good, but no luck.
There is a note from forum to change the content maintenance under
SLD->Administration->Content Maintenance->Subset (Landscape description)...
Need some pointers on what to change & get the file adapter to work? Thanks.
Another observation is all adapters got empty menu (no Integration Server). However IDOC, HTTP got integration server populated.
====================
Re: No Integration Server under Adapter Engine at Communication Channel config
Posted: Sep 12, 2007 4:46 PM    in response to: Jochen Schertel
Hi All,
the problem was related to missing some Associations under Contend Maintenance for the Integration Server.
After implementing again, the problem was solved!
Regards,
Jochen
====================

Hi Jochen,
Can you please check following parameters in sxmb_adm on your application server.
Goto TC : sxmb_adm...select Integration Engine configuration n check whether you have maintained global configuration data as
Role of Business System : Application system
and Corresponding Integ. Server : http://xi hostname:port/sap/xi/engine?type=entry
Also check if you have created following RFC destinations:
1. INTEGRATION_DIRECTORY_HMI(H)
2.LCRSAPRFC (TCP/IP)
3.SAPSLDAPI
Nilesh
Nilesh

Difference between Testing Message in Integarion Engine and Adapter Engine

Hi Experts,
in project, we always test message in runtime workbench>component monitoring>integration engine-->Test Messge
however, i also find that in runtime workbench>component monitoring>adapter engine also exists a Test Message tab.
we don't have access to test messages in this tab, so can anyone tell that what is the difference between testing message in integration engine and adapter engine?
thanks in advance.

The usual flow of messages in scenarios which use adapters at both sender and receiver end is as follows
Sender system -> Adapter Engine -> Integration Engine -> Adapter Engine -> Receiver system
When you use the testing option in IE, then you are basically posting the message directly to the Integration Engine.
When you use the testing option in AE, then you are trying to post the message to the adapter engine, which will then forward the message to the Integration Engine. IN this testing, you are also testing the sender adapter also.
Regards,
Ravi Kanth Talagana

How do you differentiate PCK and adapter engine

how do you differentiate PCK and adapter engine?????

HI Gabriel,
the PCK is used,if you want to exchange Messages from or to XI. That means for that,you need on the sender or receiver Side a XI System. The one way is,that a XI sends the Native XML SOAP Messages via XI Adapter to the PCK.Then the message can be converted in some other formats,because the PCK has its own Adapter Engine. But there is no IDOC adapter.
The second way ist,that for example you pick up XML Files with the PCK and transfer it to an XI system in the Native XML Format. With the PCK you can't do a File-to-File Transfer.
The PCK is a standalone Application,which has its own Monitoring,Configuration and User Management.Instead of that, a decentral Adapter Engine is directly connected to an XI System and is configured centrally in the XI System
PCK is a mini version of XI. It is used by smaller business partner (who cannot afford to install a full blown version XI) to exchange XI messages with large companies (having an XI installation).
PCK has its own local Adapter engine.
Check the following links:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3f9fc190-0201-0010-0cbd-87f50e404d91
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/34a1e590-0201-0010-2c82-9b6229cf4a41
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6f83d790-0201-0010-629d-ab5bf10c94e4
http://help.sap.com/saphelp_nw04/helpdata/en/8f/d906d01f77fa40a4c84683c3f8326f/content.htm
http://help.sap.com/saphelp_glossary/en/6d/9c44b95c168e4cb500bb430ec193cc/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/99/115281baba404890d2561617a78409/content.htm
/people/siva.maranani/blog/2005/08/30/pck-cross-sectional-analysis-part-1
/people/siva.maranani/blog/2005/08/30/pck-cross-sectional-analysis-part-2
Hope this helps.
Cheers...
Vasu
** REward Points if found useful **

Message ID in Integration Engine and Adapter Engine

Hello,
I have one question related to messages generated in XI.
Is the Message ID specified in the Integration Engine same as the Message ID used during the Message transformation in the Adapter engine?
What is the message flow once the message reaches XI and vice versa?
Regards,
Gajendra.

Yes.it is the same ID used .
once the message reaches XI it goes thorough IS which has pipe line steps such as inbound processing receivr determination ,interface determination, techincal routing,mapping,outboundporcessing etc.
for more look at this link
http://help.sap.com/saphelp_nw04/helpdata/en/01/d9d43fb9490c65e10000000a114b1d/frameset.htm

Question about Integrated Configuration (Advanced Adapter Engine in PI 7.1)

Hello,
When you use Advanced Adapter Engine in PI 7.1 with Integrated Configuration scenario, it bypasses ABAP stack therefore you can't monitor processed message in SXMB_MONI. Instead this message shows up only in RWB Adapter Engine message monitoring. When you select the message from there, you can view the BEFORE mapping payload in Message Content tab. My question is how do you view the AFTER mapping payload when using Integrated Configuration.
Thanks,
Jay

> My question is how do you view the AFTER mapping payload when using Integrated Configuration.
You can't.
So first you have to configure a standard scenario and test the stuff. When everything is fine, remove the standard scenario and create an Integrated Configuration.

How to hide a payload in sxmb_moni and RWB and Adapter engine.

Hi
I need to hide the pay load in sxmb_moni, RWB, Adapter engine. Because payload has some sensite information.
I need to hide the pay load for perticuler interface Name (http://filetoidoc.com) only. not all payloads.
Please help us this.
advanced thanks
Sati

Ofcourse you can:)
below are the fields mentioned in blogs
We can also tell exactly which interface/service/namespace can be used:
SXMBPARTY= Communication Party
SXMBPRTAG= Issuing Agency
SXMBPRTTYP= Identification Scheme
SXMBSERV= Service
SXMBIFNS = Interface Namespace
In your case you will use the last one SXMBIFNS
Thanx
Aamir

Adapter Engine alerts: Error in Adapter Engine

Hi All,
I have configured Alerts for Adapter Engine.
I am getting alerts with Alert Text as follows during Scenario runs - XML File to ABAP Proxy Scenario (Average size of files is in MB's) daily.
1.Error: DeliveryException: Problem inserting 6204b980-2f9d-11dc-9262-001635731444(OUTBOUND) into the database: com.sap.engine.services.dbpool.exceptions.BaseSQLException: Connection is invalid.
2.Error: com.sap.engine.services.ts.exceptions.BaseSystemException: Exception ( SAP J2EE Engine JTA Transaction : [c1e757e003475] ) in rollback.
This error comes just momentarily and Messages (Files) are processed Successfully (No System Errors,etc at Adapter Engine).
I am not able to figure out the reason for this exception.
Expecting your valuable inputs.
Thanks.
Regards,
Sudharshan N A

Hi,
This happens sometimes when the adapter engine is on heavy load. Since the message is asynchronous, it is persistent. So it tries to write the message onto teh backend DB on which XI is involved. When teh load is more on the AE, the communication sometimes fails for a few milli seconds. This happens at times. Once it has enough capacity, it again preocesses the message successfully. It also happens sometimes that the message content will be lost. As of now, i am not sure if there is any solution for this.
reward if helpful.
Thanks,
sarath.

Business processes in Customer loyalty and campaigns

Hello folks
I am supposed to contribute towards planning a workshop focussing on business processes in campaigns and loyalty management. And am I having difficulty to keep it focussed on business side then technical configuration. Please let me know on what points should I focus? What are the likely processes involved and how to put together them in documents before the start of the implementation. Assuming the sector to be retail or manufacturer of appliances.
Thanks,
Jo

Whatever issues posted here are real time issues only. The only effort what is needed from your end is searching. Search the forum and go through all the issues posted so that you will have a fair idea.
thanks
G. Lakshmipathi

Process for Integrating HD and STD Video in One Sequence?

Here's the situation, I have footage of an event from 2 cameras. The customer wants footage from both cameras in the final video. Naturally when the standard footage is dropped into the timeline it is accompanied with ALOT of black space. What is the best way to eleminate most of the black space? Do I use 2 different timelines and them somehow integrate the 2? Please help!

Either scale the HD source down with the motion effect (best) or scale the SD up to HD dimensions with the motion effect (worst) or use a special plug-in from Redgiant Software (OK but costly).
Since most deliveries are still on DVD, thus SD format, the first option is best. You can also use two different sequences, one with HD and one with SD material and export them separately to SD format, but the drawback is that you can't mix footage from the two cameras.

Why my Local Adapter Engine not showed in SLD and Integration Directory?

Hi guru,
I have installed one Local Adatper Engine on Host B, then an XI is installed on Host A, but After I installed the local adapter engine and follow the standard configration step mentioned in this document:https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/307deae3-604e-2a10-feae-f016fb9cadd4.
After the configuration is done, I restart the local adatper engine, but this local adapter engine is not showed in integration directory.
what is the problem?

The post-installation configuration steps are not complex, I exactly followed.
what other reason could it be? have any guru configured local adapter engine before?

Adapter engine empty in Integration Directory

Hi
when I try to create a Business System in Integration Directory and I am configuring the communication channel
(for example File Adapter or RFC )
the field "Adapter Engine" is empty and has no selection to choose from.
Is there a problem in configuration or else? I have no idea.
Any help is appreciated and points will be rewarded

HI,
I think the problem is your Adapter metadata is not imported.
Import the SAP BASIS Software Component into the Integration Repository.
For more-
Copy XI3_0_SAP_BASIS_<version> (6.40,7).tpz from <Components DVD>/XI /XI_CONTENT to directory /usr/sap/<SAPSID>/SYS/global/xi/repository_server/import/
After that go to Integration Repository->Tools->import Design Objects and then import it.
Regards,
Moorthy

In detail architecture of Adapter engine and Adapter framework

Hi,
Can somebody give me the archtecture of adapter angine and adapter framework and how how the message will be process by the adapter engine after receving the message from the messsaging service in detail.

Hi Santosh,
Check these for Adapter Framework and Adapter Engine:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/34a1e590-0201-0010-2c82-9b6229cf4a41">Adapter Framework</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/327dc490-0201-0010-d49e-e10f3e6cd3d8">Adapter Framework and Adapter Strategy</a>
Adapter Engine:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6b9f17e1-0901-0010-45ac-a9a124b44a82
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/03fd85cc-0201-0010-8ca4-a32a119a582d
Regards,
Subhasha Ranjan

Business process engine, Integration engine, and Adapter engine

Similar Messages

Maybe you are looking for