Business Process Repository not displaying data for 4.7 systems
Hi All,
Having a bit of an issue finding any 4.7x200 related stuff on the Business Process Repository on solar_project_admin, I checked an this should be related to the ST-ICO patch but im in ST-ICO 150-700 patch 17...
Any ideas?
System is SolMan 7.0 EHP1
Regards
Juan
Hi
The BPR is accessed via solar01
solar_project_admin is used for project creation and logical component is added here for 4.7 or other systems as per req.If that is not appearing contact ur basis team they will create a logical comp for ur req.
OR
are you having prob in adding the buss processes than you can add as shown in this guide as follows
https://websmp210.sap-ag.de/~sapdownload/011000358700002006042008E/HowTo_Impl_Bus_Proc.pdf
Hope it solves ur prb
Regards
Prakhar
Similar Messages
-
BPM chart (process cube) not displaying data from business indicators
SOA/BPM Gurus,
I need some pointers for the below problem.
I am trying to do a basic BPM tutorial of generating a chart out of business indicators. I am creating a custom dashboard in the BPM workspace for the Request Quote process. The problem is that after I create the chart definition in BPM workspace, the charts do not pull any data for the business indicators. Here are the high level steps that I have performed:
1. Created a Request Quote process with typical steps such as - 1. Submission of Quote by Sales Rep; 2. Business Practices approval; 3. Deal & Contract Terms approval; 4.Save Quote.
2. I created 3 business indicators - Revenue Dimension, Industry Dimension, discount
3. After deployment, submitted a few quote requests through to final SaveQuote step.
4. Added a script task just before the Save Quote step to initialize these indicators from the corresponding elements from quote.xsd
5. Using the Sales Rep user, created a custom page and created a Data Source (Bar graph) with series=Revenue Dimension, Group=Industry, Variable=discount (operation=avg). The data type is Activity & measurement Sampling.
Initially I thought that the cause for data not being shown up is that the business indicators are not being initialized at all. But then I debugged this by writing the business indicators to the file on the SaveQuote step; the file generated did print all the correct values for the business indicators proving that they are being initialized.
Also, just to check whether the graph is picking any data at-all, I changed the data source to Work load per process and work load per participant and checked whether it shows transactions being created for the RequestQuote; the gragh did show data.
I am not sure I am missing any step such as a setting,etc on weblogic or em
Regards,
SudriptaHi,
You should complete the instances to see the data for the "Activity & measurement Sampling" graphs.
Make sure you have completed instances.
thanks,
Murugesh -
BPM reporting not displaying data for newly added field
Hello All,
I have a BPM process up and running fine. I have added reporting for monitoring no. of context field. I have also created a VC model for displaying the BPM report data. However, VC application is displaying only the context field that I had selected initially during the New Reporting Datasource creation. It'd not display the reporting data for the field that I added later.
Please helpHi Apoorva ,
Have you checked in the process repository whether your new process is activated or not?
Thanks & Regards,
Rohit -
Graph in BEX not displaying data for the selected range
Hi Gurus,
I am running a report for the calweek 200801-200840. But the graph is displaying value upto 200835. The data is available in the cube till 200840.
Please help!!
Thanks
NishaHi Nisha,
Please check once again whether there is data for 200836 to 200840 for the corresponding selections and restrictions you have mentioned in the design of your query.
Regards,
Suresh -
Hi Folks,
I have an infoset which is on top of two ODSs.
Data for a particular cost center code present in both the ODSs.
There is no data prsent in RSISET for that CC.
Also the query is not showing any data for that CC.
Data is not showin in RSRT for that CC ,but the SQL stament is getting generated for that CC.
Already Checked the infoset key fileds settings and all....
Y its happening like this any ideas???
Need your help buddies urgent issue.Please check weather the links are established between the info objects properly in the infoset.
-
Down payment process for Poland, new business process or not ?
Hello,
I'm a little bit confused about implementation down payment process for Poland.
The OSS-notes 818079 and 1007635 describe a solution for this.
How do I have to implement the correct down payment process for Poland ? Do I have to create an extra business process with new sales order type, new billing type, separate calculation procedure, new output type and so on ?
Or is it possible to use existing business processes in sales and distribution for down payment processes ?
Thanks in advance
Holgerhi,
Check the process for down payment processing
The following Customizing settings have to be made for down payment processing:
Settings for the billing plan - To activate the billing plan function, maintain the materials, for which you wish to process down payments, with item category group 0005 (milestone billing). This gives the item type TAO via item type determination. The item type TAO calls up the billing plan function.
You need to implement the following activities in the billing plan for down payments:
Maintain deadline category - This determines the billing rule (percentage or value down payment) for the down payment request. The system assigns billing type FAZ (payment request) defined in the standard system with billing category P. (For the billing type FAZ there is the cancellation billing document type FAS in the standard system).
Maintain the deadline proposal - Use the down payments that are due for the proposed deadlines.
Maintaining a Pricing Procedure with the Condition Type AZWR:
In the standard system the condition type AZWR is delivered for the down payment value already provided but which has not yet been calculated. You must include this condition type in the relevant pricing procedure before output tax.
Enter condition 2 (item with pricing) and the calculation formula 48 (down payment clearing value must not be bigger than the item value) for the condition type AZWR.
Before the condition AZWR you can create a subtotal with the base value calculation formula 2 (net value). If the condition AZWR is changed manually, you can get information on the original system proposal from the subtotal.
Maintain the printing indicator - The pricing procedure can not be marked as a transaction-specific pricing procedure (field Spec.proc.) The condition type AZWR has the calculation type B (fixed amount) and the condition category E (down payment request / clearing).
Maintaining the Billing Document - In the standard system there is the billing type FAZ (down payment request) and the billing type FAS for canceling . The down payment is controlled using the billing category P of the billing type. A billing type becomes a down payment request when the billing category P is assigned. You have to maintain blocking reason 02 (complete confirmation missing) for the billing documents and assign it to billing type FAZ.
Copying control - Copying requirement 20 must be entered in copying control at item level for the down payment request. In the standard system the order type TA for copying control is set up according to the billing type FAZ for the item category TAO.
Copying requirement 23 must be entered in copying control at item level for down payment clearing. In the standard system the order type TA for copying control is set up according to the billing type F2 for the item category TAO.
Financial Accounting settings - A prerequisite for down payment processing is that the account is assigned to the underlying sales document. To do this, change the field status settings in Customizing as follows:
Set reconciliation accounts (transaction OBXR) - For the `received down payments' and `down payment requests' from
the G/L accounts you have selected, you should assign the field status definition G031.
Maintain accounting configuration (transaction OBXB) - For the down payments (posting key ANZ in the standard system) and the output tax clearing (posting key MVA in the standard system), you must maintain the posting key.
You must also carry out a G/L account number assignment for the tax account.
Maintain the posting key (transaction OB41) - For posting key 19, set the sales order as an optional field !!!
Maintain the field status definition (transaction OB14) - For field status variant 0001, field status group G031, set the
sales order as an optional field !!!
Assign the company code to the field status variants (transaction OBC5)
chandu -
How to downloadin Business Process Repository in Solution Manager?
Hello,
Does anybody know how to download whole Business Process Repository from solution manager?
I know how to download BPR, that are related to project, to excel file, but I want to download all the scenarios,processes are inbuilt to the Solution Manager business blueprint.
Can anybody help me?
Thanks,
MahanteshHello Mahantesh,
I suppose that your idea behind this question is that you would like to browse the contents of the BPR. For this specific pupose, SAP will deliver a new web dynpro application with SAP Solution Manager 4.0 SP 12 and the respective stack coming out mid June 2007 which allows you to browse all BPR contents in your SAP Solution Manager system. So you no longer have to create a seperate project and select the contents via F4 value help in SOLAR01 in order to access the contents.
For further updates, please check the news mid June:
<a href="http://service.sap.com/solutionmanager">http://service.sap.com/solutionmanager</a>
Media Library -> Technical Papers. It will probably be called: "4.0 Support Package Stack <latest stack> [probably stack 12]"
However, please note that an individual download of the entire or partial BPR structures into MS Excel will not be possible.
Best regards,
Doreen Baseler -
Integration Process is not displaying in SXI_CACHE
Hi all,
My Integration Process is not getting displayed in SXI_CACHE.
After configuration when I executed the scenario ..it went in to error "NO RECEIVER FOUND"
when i checked in SXI_CAHE the cache contents are not updated.
My Integration Process is not displaying in SXI_CACHE .....in not there in the list,this is the frist BPM in this machine.
Inside IR the Integration Process is activated with no error.(F7).
What is wrong with my configuration, have any one faced the same issue?
Thanks for your time and reply.
Regards
SunilHi Sunil,
Go to SXI_CACHE , then from Menu XI Runtime Cache choose Start Delta Cache RefreshF6. Try this, , After clicking wait for sometime to refresh.
Path Prefix set to /dir/CacheRefresh.
https://websmp204.sap-ag.de/~sapdownload/011000358700003163902004E/HowTo_handle_XI_30_Caches.pdf
Also check out the role of the user using SU01. are you using PIISUSER?
Also refer:
How to handle cache in PI - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0332b2a-eb97-2910-b6ba-dbe52a01be34
Also check
Does PIISUSER have the role SAP_XI_IS_SERV_USER_MAIN. Is profile generated for the role?
See SAP Note 1030255.
Some more advices:
1.Go to Environment -
> Click on Clear SLD data cache.
2.Tools -> Cache Notification
You will find at that there will be some red dots if u refresh
Please click on then and refresh once again
Regards,
Vinod. -
Business Process Repository Server and Business Process Publisher
Hello,
How to install "Business Process Repository Server" and "Business Process Publisher"?
Tanks
DanielaHi,
Both business publisher and process repository are available in CD2 of BPA Suite complete (for windows OS).
Important step before installing the business process repository is that you must have installed the database. Or else you must have installed BPA with OracleLite or XE database. At the time Business process repository installation you need to choose the database option 1 if Oracle enterprise data base is installed, else you may choose option 2 which says you already have BPA installed with database.
regards, -
Solution Manager 4.0 and SAP R3 4.7E - Business Process Repository Question
When I am in solution manager setting up my business processes (solar01) to select my logical component with the drop-down I do not see my SAP R3 ERP 4.7 system available for selection. They do exist in my SLD (SMSY) and all the components with the 4.7 system. Does anyone know why they are not showing up in the drop-down for business process repository selection help?
Thanks
Skip FordHi,
For how long the installation process has been running. Check the following.
1. The virtual memory page size that you have assigned.
2. The hard disk free space.
3. The Virtual memory should be optimized size, should not be larger than the free space available.
These are performance optimization settings.
I guess the installation would take around ten hours, I am not sure.
But one thing is sure <b>SAP</b> is not that bad to get aborted abruptly.
Keep Patience while installing. Before that take care that your system satisfies, requirements.
Hope I was clear. Feel free to get back, incase you face any problem.
--Thanks and Regards,
Ragu
ERP,
Suzlon Energy Limted, Pune
Extn: 2638
+919370675797
I have no limits for others sky is only a reason -
Not getting data for 1 field in ODS
Hi BW Experts,
I am loading the data from R/3 to BW.I have loaded the data through PSA.The data is available in New data field. After activating the ODS, for 1 field the data is not uploaded and in the report, the values are not displaying.
I have checked the Transformations also. it is mapped correctly.But still i am not getting data for that field.
Thanks,
Siva.Thanks for the Update
1. What is your Service Pack Level?
Service Pack is 0016
2. Are you able to see the data in PSA?
Yes I can see the data in PSA
3. After load, are you able to see the value in New table?
Yes i can able to see the data in New data table
4. Anywhere, are you doing the SORTING of Data Package?
No I have not sorted the data Package.I have not written any coding on this
I have not written any coding in transformation also.
Thanks,
Siva. -
XML has data but PDF is not displaying data
Hi Gurus,
I have one report with excel and pdf out put .
excel is working fine but pdf is not displaying data showing blank page . both out puts are using same XML.
Intresting thing is if I open RTF from bi publisher desktop and load XML data then i can see all the records.
but The same RTF is not showing data from Report.
I don't know what is the wrong with RTF.
I am attaching RTF and XML. could you please go through it and help me ?
Thanks for your help.Hi Bogdan,
i have 2 outputs for this report excel and PDF.
after scheduling report excel is working fine but PDF out put is failure. i am getting following message.
Job Name : Payment Request
Job Executed Date : March 19, 2015 9:15:11 AM CDT
Status : Job was failed.
View History :
Detail Message:
::RIPPLE_OUTPUT_FAILED::[INSTANCE_ID=vausobias201.austin.ppdi.com.1394740179760] [OUTPUT_ID=1006] ::DOCUMENT_GENERATION_FAILED::[INSTANCE_ID=vausobias201.austin.ppdi.com.1394740179760] [OUTPUT_ID=1006][ReportProcessor]Error rendering documentoracle.xdo.servlet.scheduler.ProcessingException: [ReportProcessor]Error rendering document
at oracle.xdo.enterpriseScheduler.bursting.BurstingReportProcessor.renderReport(BurstingReportProcessor.java:447)
at oracle.xdo.enterpriseScheduler.bursting.BurstingReportProcessor.onMessage(BurstingReportProcessor.java:127)
at oracle.xdo.enterpriseScheduler.u -
Integration Process is not displayed in SXI_CACHE
Hi Experts,
I am getting the below eror when I try to excute the SOAP -> JDBC BPM scenario
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_BE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
The integration Process is not displayed in the SXI_CACHE. Done with all type of cache refresh, restarted the server also.
What could be the problem?
Earlier I was getting the similar error for non-BPM scenario, just refreshed the cache in Admin, IR, ID and in SXI_CACHE and it solved the issue.
But here the Integration Process is not displayed after doing the above step.
Note: Always the SXI_CACHE is in ERROR status(Red color symbol)
Everytime before executing the scenario, I refresh the cache in SXI_CACHE. Once I done with the refresh, I get the belwo status
1. Cache contents are being refreshed (Yellow color)
2. Error during last attempt to refresh cache (Red Color)
Please share your suggestions to solve this issue.
Regards
SaraHi Sara
Go to SXI_CACHE , then from Menu XI Runtime Cache choose Start Delta Cache RefreshF6. Try this, , After clicking wait for sometime to refresh.
Path Prefix set to /dir/CacheRefresh.
https://websmp204.sap-ag.de/~sapdownload/011000358700003163902004E/HowTo_handle_XI_30_Caches.pdf
Also check out the role of the user using SU01. are you using PIISUSER?
Also refer:
How to handle cache in PI - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0332b2a-eb97-2910-b6ba-dbe52a01be34
Thanks -
Planned Cost & Planned revenue - Not displaying data in Bex.
Hi BW Experts,
I have installed 0PS_C04_Q002 query from the business Content and loaded the data for the Cube 0PS_C04.
While executing the query, I am not getting data for Planned Cost and Planned revenue. I am getting data for Actual Cost and Actual revenue. As I am using standard restricted key figures, I am not getting the data. Can you please help on this Issue.
Thanks in Advance.
Thanks,
Jelina.Hi Jelina,
Is the load successful to the cube?
Did u check the data in the cube?
Is the data populated fine?
Otherwise check the properties of Planned Cost and Planned Revenue by changing the Infoobjects. And check the lengths given and the datatypes. Compare them with the length and the datatypes of the fields u are retrieving from your source system.
Hope this helps u...
Regards,
KK. -
Business Process Repository - installation problem
Hi,
Please help me with installation of Oracle BPA Suite.
2 days ago I downloaded Oracle BPA Suite from "edelivery.oracle.com" - B46789-01, Oracle Business Process Analysis Suite 10g (10.1.3.4)
Installation set comes in 3 parts and is unpacked into 2 directories -
CD1-10.1.3.271679
and CD2-10.1.3.271679
I started CD1-10.1.3.271679/OracleBPA.exe
(screenshot - http://img525.imageshack.us/img525/6610/scr1wy9.jpg)
Oracle Business Process Architect installed fine.
Now I would like to install Business Process Repository following to instructions in chapter 3.4.1.1 (steps 2,3,4,...) of installation manual (CD1-10.1.3.271679\Docs\ENU\installation_guide_s.pdf), but I could not find button "Install Oracle Business Process Repository" which is mentioned in step 3 - see screenshot (http://img525.imageshack.us/img525/6610/scr1wy9.jpg).
Then I started file CD2-10.1.3.271679/bin/demo32.exe
(screenshot - http://img391.imageshack.us/img391/7439/scr2vp2.jpg)
It seems that the button "Install Oracle Business Process Repository" now is in place but it doesn't respond to click. I could press the button, but installation of repository does not start.
(button "Install Business Process Publisher" works fine)
What I'm doing wrong?
IngarsHi,
Trying running the installer at:
CD2-10.1.3.271679\OracleBPA.exeI don't have installer at this place. The only files/directories I have in CD2-10.1.3.271679 are
Bin
Business Process Publisher
Business Process Repository
Ingars
Maybe you are looking for
-
Can someone tell me what is an RMA - and where the heck do I find it? Trying to return my nearly new playbook for repair and have had nothing but headaches. Thanks,
-
Frustrated-how do i reconnect my 4s phone to my new computer?
-
Activate datasource SAP-R/3 - FI
I activate datasource in ECC source system using t-code RSA5 for SAP-R/3 -> FI. got these warnings in the log. Do they matter? Thanks for you help. Generating DataSource 0FI_TV_01 The even-numbered length of the DEC field TRIPDUR can lead to problems
-
Flash Player not running/installing
So far, on two computers, I have had this problem. I have no problem downloading the software, I even installed it on two computers. However, when I go to install it on a few computers in my work environment, it will ask to run and not run. I sat fo
-
Upper & Lower Fields visable on playback on TV
I've checked my seq. settings to make sure my captured footage match my seq. I even reviewed the info on each .mov file. The problem is when I playback my footage I can see the upper and lower field when ever someone moves. The fields are not just sm