Business Rule Sequence issue

Hi,
We have our system on 9.3.0.1 and I am currently facing a strange issue.
I have a set of rules that I have added to an existing sequence. Now I want these rules to execute in an order and I have set the order in the sequence. However when I save, close and open the sequence again, it randomly changes the order.
Has anyone seen this issue before?
Regards,
Amol

Hi,
Well firstly the version 9.3.0.1 isn't a very stable one. So if you are working on 9.3.1 or above then I don't think it should affect you. Also what I noticed was that as long as the total number of business rules in the sequence were less than 10 then it wouldn't cause the issue.
Hope it helps.
Regards,
Amol

Similar Messages

Business Rule Sequence Error in Planning

Hello Everyone,
I have a Planning application where users can run a sequence of rules by going to Tools > Business Rules and selecting the sequence. The sequence has about 8 rules in it. The sequence errors after the 7th rule (a currency conversion/calculation which takes upwards of 12 minutes). The logs do not say anything about an error, however, it does say that the active user was cleared on the database. (The BR log says that the rule never finished but the Essbase log says that it finished. The following rule in the sequence never starts.
Note: The business rule sequence completes without errors when the sequence is started from Essbase Administration Services.
Is there some type of timeout/setting update I should look at or any suggestions on where to look within the business rule?
Thank you,
Mark

Hi,
Have a read of the following :- http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_hp_admin/ch02s07s04.html
It explains how to set the threshold before business rules are run in the background to get around timeouts.
Cheers
John
http://john-goodwin.blogspot.com/

Business Rules Import Issue

Hi, I met some problems in business rules import.
1. The buisness rules import cannot be overwritten, everytime when I deployed a rule to a new environment, I need to delete the old one first. Can I do some setting to enable overwriting?
2. When the rule contains a character ">", the export xml will add a special character like "space" after it. Sometimes caused the rules failed after the deployment. Seems it is a bug.
3. When the rule has the property "hide" for some run-time prompts, sometimes it will lose after the import, is it also a bug or any workaround?
If any good suggestion or experience for the above problems? Thanks

Hi,
It would be helpful to others if you say which version/patch you are using.
To answer number 1, that has always been a feature of business, you don't get the option to overwrite, its always been a pain.
I have not come across issue 2 and I am sure I have imported many rules with the cross dimensional operator in them ->
Cheers
John
http://john-goodwin.blogspot.com/

Business Rule Running issue??

I am having all the BR's in my webform Run on Save
When the rule runs on save, the rule is taking a lot of time to complete and may it is cretaing loops, may be since there are more than one rule.
And if I run that rule by double clicking the rule on the same webform it gets completed in 30-40 seconds.
I don't know what could be the issue
I don't think there is a problem in my rule because that rule runs quickly by double clicking it.
Please help!!
Recenltl I also got error opening Planning
The eror says:
Failure to connect to the Apache Bridge
No Backend server available for connention.
Thanks

You could look into setting business rules to run in the background after a set time period, this may help issues with timeouts on the web server.
Have a look at :- http://download.oracle.com/docs/cd/E17236_01/epm.1112/hp_admin/ch02s07s05.html
Cheers
John
http://john-goodwin.blogspot.com/

Business Rule Audit Issue

We turn on audit for business rule in both classic and EPMA planning apps. EPMA version is the same class app migrated. I checked the audit record after launching a business rule in both classic and EPMA version. In classic, the rule has type of Business Rule and New_val as the name of the rule. However in EPMA version, the rule has a type of Calc Script and New_val as the first several SET commands in the script. Why the EPMA version behave this way?
Thanks

Hi,
I did'nt faced any issues wile exporting using the LCM. This is actualy the best methods of exporting and importing the BRs form different environments.
You can also try exporting na dimporting the BRs from EAS console.
I dont you how you are doing it, it is hjust about selecting the artifacts take an export and import from the file system.
It is ok to copy paste if you have a few rules to export, but if you have many, then try to use one of the approach that the product provides.
Thanks,
Sourabh

Business rule export issue

Hi all,
I created a business rule in calculation manager. Now I want to have this one in my EAS console.
I try to export my business rule from calculation manager, but when I click export some window appears and immediately disappears. So I can't do export.
What it could be? Is there any else way to export business rule to EAS Console?
Thanks in advance

Hi,
I did'nt faced any issues wile exporting using the LCM. This is actualy the best methods of exporting and importing the BRs form different environments.
You can also try exporting na dimporting the BRs from EAS console.
I dont you how you are doing it, it is hjust about selecting the artifacts take an export and import from the file system.
It is ok to copy paste if you have a few rules to export, but if you have many, then try to use one of the approach that the product provides.
Thanks,
Sourabh

Business rule LCM issue

while importing business rule from QA to PROD using LCM we are facing issues..It doesn't import Business rule . we had to do it manually copy and paste the code and variables. then stop and start the services to make this rule effective..we are on 11.1.2.0 version
please advice and anyone else is also facing same issue
thanks

Hi,
I did'nt faced any issues wile exporting using the LCM. This is actualy the best methods of exporting and importing the BRs form different environments.
You can also try exporting na dimporting the BRs from EAS console.
I dont you how you are doing it, it is hjust about selecting the artifacts take an export and import from the file system.
It is ok to copy paste if you have a few rules to export, but if you have many, then try to use one of the approach that the product provides.
Thanks,
Sourabh

Business Rule RTP issue

Hello,
Currently I am seeing end users intermittently having issues on Business Rules. THe problem is that the description/prompt strings do not display when a user launches a rule. This seems to occur in both SmartView and IE8.
Has anyone experienced this sort of issue before ?
Cheers
Chris

I had some weird issues where the pop-up wasn't actually being displayed on the monitor, but it was opening (I think it was actually on 11.1.1.3). We found this out by someone experiencing the problem, and then adding a second monitor for another purpose and the box would show up on the second monitor. We ended up deleting the Excel items in the registry, and when Excel is reopened it rebuilt them and the popup worked, another option would have been to add a second monitor temporarily to move it back to the main monitor.
Regards
JTF

Business Rule access issue

Hi,
I have newly set up few business rules in 9.3.1. I have two issues here.
1. No users listed :In Access Privileges tab,when I click on 'Add' to assign access to a user on this BR, there is only one user i.e admin(Internal) and no other users listed. But in Groups, there are groups listed and I have assigned access to those groups on this BR.
2. Users can not view BRs in planning web : Although I have assigned access to available groups, the users in those groups can not see this business rule in planning web.
Note : Even though I login to planning web as admin, I can not see BRs.
Any help would be greatly appreciated.
Thanks
Ashok

If you have not already it is worth going through the following doc in Oracle Support - "Troubleshooting Hyperion Business Rules Issues [ID 763345.1]"
Cheers
John
http://john-goodwin.blogspot.com/

SOA - BPEL with Business Rules deployment issue

I am trying to construct the Purchase Order Processing SOA sample, I am able to deploy and test with mediator, BPEL. When I tried to add business rules to the BPEL I am getting following error. can anyone please help on this?
10:47:54 AM] Creating HTTP connection to host:XXX.XXX.XXX.XXX, port:7001
[10:47:54 AM] Sending internal deployment descriptor
[10:47:54 AM] Sending archive - sca_POProcessing_rev1.4.jar
[10:48:00 AM] Received HTTP response from the server, response code=500
[10:48:00 AM] Error deploying archive sca_POProcessing_rev1.4.jar to partition "default" on server AdminServer [http://XXX.XXX.XXX.XXX:7001]
[10:48:00 AM] HTTP error code returned [500]
[10:48:00 AM] Error message from server:
There was an error deploying the composite on AdminServer: Deployment Failed: Error occurred during deployment of component: ManualApprovalRule to service engine: implementation.decision, for composite: POProcessing: Error compiling fact classes.
Error while compiling fact classes for service ManualApprovalRule.
Check the underlying exception and correct the error. If the error persists, contact Oracle Support Services.
ManualApprovalRule.
[10:48:00 AM] Check server log for more details.
[10:48:00 AM] Error deploying archive sca_POProcessing_rev1.4.jar to partition "default" on server AdminServer [http://XXX.XXX.XXX.XXX:7001]
[10:48:00 AM] #### Deployment incomplete. ####
[10:48:00 AM] Error deploying archive file:/D:/ORACLE_HOME/Docs&Samples/Purchase_Order_Tutorial/POProcessing/POProcessing/deploy/sca_POProcessing_rev1.4.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)

Hi,
It would be helpful to others if you say which version/patch you are using.
To answer number 1, that has always been a feature of business, you don't get the option to overwrite, its always been a pain.
I have not come across issue 2 and I am sure I have imported many rules with the cross dimensional operator in them ->
Cheers
John
http://john-goodwin.blogspot.com/

Business Rules security issue

We have been unable to access the business rules in out QC environment for a while. When you try to expand on them in EAS we get the error
Error logging in to Business Rules. The repository has not been configured or you are not authorized to use Business Rules.
Our dba recently upgraded the SQL server to a new machine and thought everything was ok. I just noticed in Shared Services that it still shows the old SQL server name in there. So how do we point it to the new SQL server?

I thought that would take care of it but we got this error:
(Apr 26, 2010, 03:26:33 PM), org.apache.commons.httpclient.Wire, DEBUG, << "Product already exists.Registeration failed: error.generalSaveModel."
(Apr 26, 2010, 03:26:33 PM), com.hyperion.ess.EASDBConfigurator, DEBUG, Exception generated
com.hyperion.interop.lib.OperationFailedException: Product already exists.Registeration failed: error.generalSaveModel.Product already exists.Registeration failed: error.generalSaveModel.
at com.hyperion.interop.lib.helper.RegistrationHelper.register(Unknown Source)
at com.hyperion.interop.lib.CMSClient.register(Unknown Source)
at com.hyperion.ess.EASDBConfigurator.registerHBRPropFile(EASDBConfigurator.java:317)
at com.hyperion.ess.EASDBConfigurator.configure(EASDBConfigurator.java:229)
at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDBConfigTask(RunAllTasksWizardAction.java:282)
at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:151)
at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Apr 26, 2010, 03:26:33 PM), com.hyperion.ess.EASDBConfigurator, DEBUG, com.hyperion.cis.config.ProcessingException
(Apr 26, 2010, 03:26:33 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
com.hyperion.cis.config.ProcessingException
at com.hyperion.ess.EASDBConfigurator.configure(EASDBConfigurator.java:252)
at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDBConfigTask(RunAllTasksWizardAction.java:282)
at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:151)
at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
Did we run it incorrectly?

Business rules sequences showing up in multiple applications

Hi,
We've added four sequences to a project for one application in EAS but they are showing up in all three of our applications in Workspace. How can we make sure these sequences are only available in the one application?
Version 11.1.1.3
Thank you.

Hi,
One thing to check for is that hbrserver.properties exists in file structure under the planning web application, e.g.
\Hyperion\deployments\Tomcat5\HyperionPlanning\webapps\HyperionPlanning\WEB-INF\classes\HBRServer.properties
This example is for tomcat on 9.3.x
If the file doesn't exist there copy it from your AAS installation dir e.g. Hyperion\AnalyticAdministrationServices
Make sure you restart planning if you have to copy the file across
Cheers
John
http://john-goodwin.blogspot.com/

Small issue in Business Rules

Dear All
i have a Business Rule callingin BPEL Process based on below XSD file
<?xml version="1.0" encoding="windows-1256" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns="http://www.bank.com/bankbpel"
targetNamespace="http://www.bank.com/bankbpel"
elementFormDefault="qualified">
<xsd:complexType name="Client-BR-Input-Type">
<xsd:sequence>
<xsd:element name="Status" type="xsd:string"/>
<xsd:element name="is-VIP" type="xsd:string"/>
<xsd:element name="Start-Date" type="xsd:date"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="Degree" type="Degree-Type"/>
<xsd:element name="Client-BR-Input" type="Client-BR-Input-Type"/>
<xsd:complexType name="Degree-Type">
<xsd:sequence>
<xsd:element name="Degree" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
after finishing my rules and decisions, i dropped Business Rule inside BPEL and start to copy values in input parameters of Business Rule, but i face *"Exception - Problem Building Schema !" !!*
and sure my problem now in XSD file, please advise why and how to avoid ? ..

Dear All
Resolved, it is a small issue as i expected, i forget to update in/out variables to map for elements in XSD file like below ..
<variables>
<variable name="dsIn"
element="client:Client-BR-Input"/>
<variable name="dsOut"
element="client:Degree"/>
</variables>
thanks

Sequence will not validate with run time prompts in business rules

I am in Hyperion Planning v 1.1.1.3, with Workforce initialized. I am creating a sequence of business rules. The rules use run time prompts within them and validate when used on their own. However, when I insert them in a sequence the sequence will not validate, apparently due to the run time prompts.
The sequence returns the error: Cannot calculate. Essbase Error(1200323): Error parsing formula for [FIX STATEMENT] (line 7): expression expected after [(].
Line 7 in the business rule is as follows:
FIX ([rtpYear],[rtpScenario],[rtpVer],[rtpCC],[rtpBU],[rtpEmp])
The problem is not isolated to this business rule, it occurs with any rule I try.
Can sequences function with run time prompts in the included business rules?
Stephen

I have figured out that if any rtp is hidden in the business rule, the sequence will not validate. Is this expected behavior for sequences?
Additionally, hiding the variables in the sequence has no effect if the variables are not hidden in the rule. When launched from a menu in a web form, the user is prompted for values for all variables (except for the Execution Database Name) although they are prepopulated based on the members in the POV, Page, etc. Is this also expected behavior?
I also find that it won't validate if "Merge launch variables" is selected (I have included rules associated with different plan types and with different dimensionality, so this may be expected). The user is prompted to provide values for every variable in each rule in the sequence, many of them duplicates (though, again, they are prepopulated based on members in the form).
Stephen

Oracle EPM 11.1.1: Business Rules issue

Hi All,
I have installed Oracle EPM 11.1.1 and I have created a planning application. However when I logon to Analytical Administration console and try to create a business rule I am facing the following issue:
1. When I try to select Planning Application out I get the following errors:
Error connecting to Essbase server <Server name>/<Application Name>.
Detail:Could not log in to Planning Server
2. As a work around I have set the Essbase outline and the rule is getting validated from AAS. This rule has been attached to a form and should be executed when I do a submit. However the rule is not running from the form. I tried running the rule from Planning web and again I am getting an error.
I checked the access rights for the Business Rule from shared services and the admin user (which I am using) has Provision and Administrator rights. Is it a configuration issue or is there something that I am missing here.
Thanks in advance,
Amol

NewUser2 wrote:
Try to add a description to the Business Rule. There is a bug associated with it and you can find out in the Planning Readme. We had the same issue and got resolved by adding a description to the BR. Hope this will work for you.But the problem is he can't even create a business rule so how can he add a description to something he can't create?
Cheers
John
http://john-goodwin.blogspot.com/

Business Rule Sequence issue

Similar Messages

Maybe you are looking for