Business rules do not show up in forms
We are using EPM 11.1.2.0. Recently, we have noticed that any new business rules we have created and associated with certain forms-do not show up in the forms.
We have verified security, location etc for the rules. Somehow they don't show up at all.(even admin cannot see it in workspace).
But they still exist if we look at rules in eas console.
Anybody had similar issues?
Edited by: 784749 on Nov 22, 2011 7:24 AM
We recently had a somewhat similar issue. We opened our Workforce planning app to the users. Even though we turned on business rules on EAS and admin was able to see the rules on forms, the users did not. Restarting Planning services solved the issue.
Cheers,
Mehmet
Similar Messages
-
Business Rules Do Not Execute When Saving a Form
When saving a form the attached business rules are not executing. Sometimes we are unable to validate business rules via AAS. When this happens we do a security refresh from Planning to Essbase and Essbase to Shared Services. At other times, we bounce planning and even Essbase and this seems to fix the problem. Today we have tried every combination (bounce planning, Essbase, AAS) and we are able to at least validate biz rules in AAS but we (i.e., users) are uanble to execute the biz rule when they save via the planning form. There are no issues running the biz rules when saving the form using an administration account. Can someone explain what's going on or provide direction as to why this problem happens and how to fix this issue?
Hi,
Well is your version 9.3.0.1? If yes then you have my sympathies :). We too have this version and face similar problems with Business Rules. Usually things come back to normal after following the steps mentioned above. However what I would want to know is the following:
1) From where are you running the Business rules? I am asking this because if you are trying to run from Smartview then I would suggest you look at the time it takes for the Business Rules to execute. If it excedes the timeout settings then it will exit out. However the BR might still be running in the back ground. This you can confirm by looking at the data.
2) Have you checked if you have installed all the patches?
Hope it helps.
Regards,
Amol -
Business Rules will not launch or open in EAS or Planning
The Business Rules will not open or launch in EAS. Additionally, they do not show up in Planning at all. The error received is "Exception occurred. Please check your log file for details." As of Friday, everything was working fine. On Monday morning the issue started. The only thing that occurred over the weekend was the weekly stop & start of all services.
Addiitonal Info:
Version 9.3.1
Can create new rules, but after saved, cannot launch or re-open
Can view the business rules in EAS, cannot open, launch, or validate
Cannot view any business rules in Planning
Have already tried stopping and starting all services
Have already tried different ids.
When reviewing the error log I could find it says the following:
AJPRequestHandler-HTTPThreadGroup-6 com.hyperion.hbr.security.HbrSecurityAPI -
Error Code: -1
com.hyperion.css.CSSCommunicationException: Unable to communicate with the server. Error Code: 3
NestedException:
com.hyperion.css.CSSCommunicationException: Failed to connect to the directory server. Error Code: 3
NestedException:
javax.naming.CommunicationException: USRTPD201P:389 [Root exception is java.net.ConnectException: Connection refused: connect]
at com.hyperion.css.spi.impl.msad.JNDIHelper.getURLContext(Unknown Source)
at com.hyperion.css.spi.impl.msad.JNDIHelper.getURLContext(Unknown Source)
at com.hyperion.css.spi.impl.msad.MSADProvider.getUserByIdentity(Unknown Source)
at com.hyperion.css.CSSAPIImpl.getUserByIdentity(Unknown Source)
at com.hyperion.css.spi.impl.nv.NativeProvider.getUserById(Unknown Source)
at com.hyperion.css.spi.impl.nv.NativeProvider.getUserByIdentity(Unknown Source)
at com.hyperion.css.spi.impl.nv.NativeProvider.getIndirectRolesListForEntries(Unknown Source)
at com.hyperion.css.spi.impl.nv.NativeProvider.getRolesListForEntries(Unknown Source)
at com.hyperion.css.spi.impl.nv.NativeProvider.getRolesListForEntry(Unknown Source)
at com.hyperion.hbr.security.HbrSecurityAPIHelper.getMergedCSSentriesArray(Unknown Source)
at com.hyperion.hbr.security.HbrSecurityAPIHelper.updateAllHashes(Unknown Source)
at com.hyperion.hbr.security.HbrSecurityAPI.getGroupsHash(Unknown Source)
at com.hyperion.hbr.db.DBGroups.getGroupsForGroup(Unknown Source)
at com.hyperion.hbr.core.GroupManagerServer.getGroupsForGroup(Unknown Source)
at com.hyperion.hbr.core.AccessControlManagerServer.getInheritedObjects(Unknown Source)
at com.hyperion.hbr.core.AccessControlManagerServer.getUserAccessibleObjects(Unknown Source)
at com.hyperion.hbr.core.AccessHash.getCurrentAccess(Unknown Source)
at com.hyperion.hbr.core.AccessHash.canLaunch(Unknown Source)
at com.hyperion.hbr.core.AccessControlManagerServer.canLaunch(Unknown Source)
at com.hyperion.hbr.core.AccessControlManagerServer.validateLaunchLocations(Unknown Source)
at com.hyperion.hbr.core.AccessControlCmdListener.validateLaunchLocations(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.essbase.eas.framework.server.application.AbstractCommandListener.handleEvent(Unknown Source)
at com.essbase.eas.framework.server.application.DefaultCommandDispatcher.dispatchEvent(Unknown Source)
at com.essbase.eas.framework.server.application.DefaultEventController.handleEvent(Unknown Source)
at com.essbase.eas.framework.server.application.EventDispatcherWorkListener.handleEvent(Unknown Source)
at com.essbase.eas.framework.server.application.DefaultWorkDispatcher.dispatchEvent(Unknown Source)
at com.essbase.eas.framework.server.application.DefaultEventController.handleEvent(Unknown Source)
at com.essbase.eas.framework.server.application.DefaultApplication.generateWorkEvent(Unknown Source)
at com.essbase.eas.framework.server.application.DefaultServlet.handleRequest(Unknown Source)
at com.essbase.eas.server.AppManServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:711)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Nested Exception:
Error Code: -1
com.hyperion.css.CSSCommunicationException: Failed to connect to the directory server. Error Code: 3
NestedException:
javax.naming.CommunicationException: USRTPD201P:389 [Root exception is java.net.ConnectException: Connection refused: connect]
at com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.getBorrowObject(Unknown Source)
at com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.borrowValidatedConnection(Unknown Source)
at com.hyperion.css.spi.impl.msad.JNDIHelper.getURLContext(Unknown Source)
at com.hyperion.css.spi.impl.msad.JNDIHelper.getURLContext(Unknown Source)
at com.hyperion.css.spi.impl.msad.MSADProvider.getUserByIdentity(Unknown Source)
at com.hyperion.css.CSSAPIImpl.getUserByIdentity(Unknown Source)
at com.hyperion.css.spi.impl.nv.NativeProvider.getUserById(Unknown Source)
at com.hyperion.css.spi.impl.nv.NativeProvider.getUserByIdentity(Unknown Source)
at com.hyperion.css.spi.impl.nv.NativeProvider.getIndirectRolesListForEntries(Unknown Source)
at com.hyperion.css.spi.impl.nv.NativeProvider.getRolesListForEntries(Unknown Source)
at com.hyperion.css.spi.impl.nv.NativeProvider.getRolesListForEntry(Unknown Source)
at com.hyperion.hbr.security.HbrSecurityAPIHelper.getMergedCSSentriesArray(Unknown Source)
at com.hyperion.hbr.security.HbrSecurityAPIHelper.updateAllHashes(Unknown Source)
at com.hyperion.hbr.security.HbrSecurityAPI.getGroupsHash(Unknown Source)
at com.hyperion.hbr.db.DBGroups.getGroupsForGroup(Unknown Source)
at com.hyperion.hbr.core.GroupManagerServer.getGroupsForGroup(Unknown Source)
at com.hyperion.hbr.core.AccessControlManagerServer.getInheritedObjects(Unknown Source)
at com.hyperion.hbr.core.AccessControlManagerServer.getUserAccessibleObjects(Unknown Source)
at com.hyperion.hbr.core.AccessHash.getCurrentAccess(Unknown Source)
at com.hyperion.hbr.core.AccessHash.canLaunch(Unknown Source)
at com.hyperion.hbr.core.AccessControlManagerServer.canLaunch(Unknown Source)
at com.hyperion.hbr.core.AccessControlManagerServer.validateLaunchLocations(Unknown Source)
at com.hyperion.hbr.core.AccessControlCmdListener.validateLaunchLocations(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.essbase.eas.framework.server.application.AbstractCommandListener.handleEvent(Unknown Source)
at com.essbase.eas.framework.server.application.DefaultCommandDispatcher.dispatchEvent(Unknown Source)
at com.essbase.eas.framework.server.application.DefaultEventController.handleEvent(Unknown Source)
at com.essbase.eas.framework.server.application.EventDispatcherWorkListener.handleEvent(Unknown Source)
at com.essbase.eas.framework.server.application.DefaultWorkDispatcher.dispatchEvent(Unknown Source)
at com.essbase.eas.framework.server.application.DefaultEventController.handleEvent(Unknown Source)
at com.essbase.eas.framework.server.application.DefaultApplication.generateWorkEvent(Unknown Source)
at com.essbase.eas.framework.server.application.DefaultServlet.handleRequest(Unknown Source)
at com.essbase.eas.server.AppManServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:711)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Nested Exception:
javax.naming.CommunicationException: USRTPD201P:389 [Root exception is java.net.ConnectException: Connection refused: connect]
at com.sun.jndi.ldap.Connection.<init>(Connection.java:204)
at com.sun.jndi.ldap.LdapClient.<init>(LdapClient.java:118)
at com.sun.jndi.ldap.LdapClient.getInstance(LdapClient.java:1578)
at com.sun.jndi.ldap.LdapCtx.connect(LdapCtx.java:2596)
at com.sun.jndi.ldap.LdapCtx.<init>(LdapCtx.java:283)
at com.sun.jndi.ldap.LdapCtxFactory.getUsingURL(LdapCtxFactory.java:175)
at com.sun.jndi.ldap.LdapCtxFactory.getUsingURLs(LdapCtxFactory.java:193)
at com.sun.jndi.ldap.LdapCtxFactory.getLdapCtxInstance(LdapCtxFactory.java:136)
at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(LdapCtxFactory.java:66)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:247)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.ldap.InitialLdapContext.<init>(InitialLdapContext.java:134)
at com.hyperion.css.spi.util.jndi.pool.CSSJNDIKeyedObjectFactory.init(Unknown Source)
at com.hyperion.css.spi.util.jndi.pool.CSSJNDIKeyedObjectFactory.makeObject(Unknown Source)
at org.apache.commons.pool.impl.GenericKeyedObjectPool.borrowObject(GenericKeyedObjectPool.java:792)
at com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.getBorrowObject(Unknown Source)
at com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.borrowValidatedConnection(Unknown Source)
at com.hyperion.css.spi.impl.msad.JNDIHelper.getURLContext(Unknown Source)
at com.hyperion.css.spi.impl.msad.JNDIHelper.getURLContext(Unknown Source)
at com.hyperion.css.spi.impl.msad.MSADProvider.getUserByIdentity(Unknown Source)
at com.hyperion.css.CSSAPIImpl.getUserByIdentity(Unknown Source)
at com.hyperion.css.spi.impl.nv.NativeProvider.getUserById(Unknown Source)
at com.hyperion.css.spi.impl.nv.NativeProvider.getUserByIdentity(Unknown Source)
at com.hyperion.css.spi.impl.nv.NativeProvider.getIndirectRolesListForEntries(Unknown Source)
at com.hyperion.css.spi.impl.nv.NativeProvider.getRolesListForEntries(Unknown Source)
at com.hyperion.css.spi.impl.nv.NativeProvider.getRolesListForEntry(Unknown Source)
at com.hyperion.hbr.security.HbrSecurityAPIHelper.getMergedCSSentriesArray(Unknown Source)
at com.hyperion.hbr.security.HbrSecurityAPIHelper.updateAllHashes(Unknown Source)
at com.hyperion.hbr.security.HbrSecurityAPI.getGroupsHash(Unknown Source)
at com.hyperion.hbr.db.DBGroups.getGroupsForGroup(Unknown Source)
at com.hyperion.hbr.core.GroupManagerServer.getGroupsForGroup(Unknown Source)
at com.hyperion.hbr.core.AccessControlManagerServer.getInheritedObjects(Unknown Source)
at com.hyperion.hbr.core.AccessControlManagerServer.getUserAccessibleObjects(Unknown Source)
at com.hyperion.hbr.core.AccessHash.getCurrentAccess(Unknown Source)
at com.hyperion.hbr.core.AccessHash.canLaunch(Unknown Source)
at com.hyperion.hbr.core.AccessControlManagerServer.canLaunch(Unknown Source)
at com.hyperion.hbr.core.AccessControlManagerServer.validateLaunchLocations(Unknown Source)
at com.hyperion.hbr.core.AccessControlCmdListener.validateLaunchLocations(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.essbase.eas.framework.server.application.AbstractCommandListener.handleEvent(Unknown Source)
at com.essbase.eas.framework.server.application.DefaultCommandDispatcher.dispatchEvent(Unknown Source)
at com.essbase.eas.framework.server.application.DefaultEventController.handleEvent(Unknown Source)
at com.essbase.eas.framework.server.application.EventDispatcherWorkListener.handleEvent(Unknown Source)
at com.essbase.eas.framework.server.application.DefaultWorkDispatcher.dispatchEvent(Unknown Source)
at com.essbase.eas.framework.server.application.DefaultEventController.handleEvent(Unknown Source)
at com.essbase.eas.framework.server.application.DefaultApplication.generateWorkEvent(Unknown Source)
at com.essbase.eas.framework.server.application.DefaultServlet.handleRequest(Unknown Source)
at com.essbase.eas.server.AppManServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:711)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Caused by: java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:507)
at java.net.Socket.connect(Socket.java:457)
at java.net.Socket.<init>(Socket.java:365)
at java.net.Socket.<init>(Socket.java:178)
at com.sun.jndi.ldap.Connection.createSocket(Connection.java:346)
at com.sun.jndi.ldap.Connection.<init>(Connection.java:181)
... 62 moreI can view the rules in EAS, just cannot open or launch. I am thinking it still has to do with the active directory that they changed, but need more time to research. Here is the specific error now:
2013-08-07 10:09:32,057 INFO AJPRequestHandler-HTTPThreadGroup-6 com.hyperion.hbr.security.HbrSecurityAPI - LDAP porvider could not be contacted.
Error Code: -1
com.hyperion.css.CSSCommunicationException: LDAP porvider could not be contacted. Error Code: 3
NestedException:
java.net.ConnectException: Connection refused: connect
at com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
at com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.init(Unknown Source)
at com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.<init>(Unknown Source)
at com.hyperion.css.spi.impl.msad.JNDIHelper.getURLContext(Unknown Source)
at com.hyperion.css.spi.impl.msad.JNDIHelper.getURLContext(Unknown Source)
at com.hyperion.css.spi.impl.msad.MSADProvider.getUserByIdentity(Unknown Source)
at com.hyperion.css.CSSAPIImpl.getUserByIdentity(Unknown Source)
at com.hyperion.css.spi.impl.nv.NativeProvider.getUserById(Unknown Source)
at com.hyperion.css.spi.impl.nv.NativeProvider.getUserByIdentity(Unknown Source)
at com.hyperion.css.spi.impl.nv.NativeProvider.getIndirectRolesListForEntries(Unknown Source)
at com.hyperion.css.spi.impl.nv.NativeProvider.getRolesListForEntries(Unknown Source)
at com.hyperion.css.spi.impl.nv.NativeProvider.getRolesListForEntry(Unknown Source)
at com.hyperion.hbr.security.HbrSecurityAPIHelper.getMergedCSSentriesArray(Unknown Source)
at com.hyperion.hbr.security.HbrSecurityAPIHelper.updateAllHashes(Unknown Source)
at com.hyperion.hbr.security.HbrSecurityAPI.getGroupsHash(Unknown Source)
at com.hyperion.hbr.db.DBGroups.getGroupsForGroup(Unknown Source)
at com.hyperion.hbr.core.GroupManagerServer.getGroupsForGroup(Unknown Source)
at com.hyperion.hbr.core.AccessControlManagerServer.getInheritedObjects(Unknown Source)
at com.hyperion.hbr.core.AccessControlManagerServer.getUserAccessibleObjects(Unknown Source)
at com.hyperion.hbr.core.AccessHash.getCurrentAccess(Unknown Source)
at com.hyperion.hbr.core.AccessHash.canLaunch(Unknown Source)
at com.hyperion.hbr.core.AccessControlManagerServer.canLaunch(Unknown Source)
at com.hyperion.hbr.core.AccessControlManagerServer.validateLaunchLocations(Unknown Source)
at com.hyperion.hbr.core.AccessControlCmdListener.validateLaunchLocations(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.essbase.eas.framework.server.application.AbstractCommandListener.handleEvent(Unknown Source)
at com.essbase.eas.framework.server.application.DefaultCommandDispatcher.dispatchEvent(Unknown Source)
at com.essbase.eas.framework.server.application.DefaultEventController.handleEvent(Unknown Source)
at com.essbase.eas.framework.server.application.EventDispatcherWorkListener.handleEvent(Unknown Source)
at com.essbase.eas.framework.server.application.DefaultWorkDispatcher.dispatchEvent(Unknown Source)
at com.essbase.eas.framework.server.application.DefaultEventController.handleEvent(Unknown Source)
at com.essbase.eas.framework.server.application.DefaultApplication.generateWorkEvent(Unknown Source)
at com.essbase.eas.framework.server.application.DefaultServlet.handleRequest(Unknown Source)
at com.essbase.eas.server.AppManServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:711)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Nested Exception:
java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:507)
at com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
at com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.init(Unknown Source)
at com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.<init>(Unknown Source)
at com.hyperion.css.spi.impl.msad.JNDIHelper.getURLContext(Unknown Source)
at com.hyperion.css.spi.impl.msad.JNDIHelper.getURLContext(Unknown Source)
at com.hyperion.css.spi.impl.msad.MSADProvider.getUserByIdentity(Unknown Source)
at com.hyperion.css.CSSAPIImpl.getUserByIdentity(Unknown Source)
at com.hyperion.css.spi.impl.nv.NativeProvider.getUserById(Unknown Source)
at com.hyperion.css.spi.impl.nv.NativeProvider.getUserByIdentity(Unknown Source)
at com.hyperion.css.spi.impl.nv.NativeProvider.getIndirectRolesListForEntries(Unknown Source)
at com.hyperion.css.spi.impl.nv.NativeProvider.getRolesListForEntries(Unknown Source)
at com.hyperion.css.spi.impl.nv.NativeProvider.getRolesListForEntry(Unknown Source)
at com.hyperion.hbr.security.HbrSecurityAPIHelper.getMergedCSSentriesArray(Unknown Source)
at com.hyperion.hbr.security.HbrSecurityAPIHelper.updateAllHashes(Unknown Source)
at com.hyperion.hbr.security.HbrSecurityAPI.getGroupsHash(Unknown Source)
at com.hyperion.hbr.db.DBGroups.getGroupsForGroup(Unknown Source)
at com.hyperion.hbr.core.GroupManagerServer.getGroupsForGroup(Unknown Source)
at com.hyperion.hbr.core.AccessControlManagerServer.getInheritedObjects(Unknown Source)
at com.hyperion.hbr.core.AccessControlManagerServer.getUserAccessibleObjects(Unknown Source)
at com.hyperion.hbr.core.AccessHash.getCurrentAccess(Unknown Source)
at com.hyperion.hbr.core.AccessHash.canLaunch(Unknown Source)
at com.hyperion.hbr.core.AccessControlManagerServer.canLaunch(Unknown Source)
at com.hyperion.hbr.core.AccessControlManagerServer.validateLaunchLocations(Unknown Source)
at com.hyperion.hbr.core.AccessControlCmdListener.validateLaunchLocations(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.essbase.eas.framework.server.application.AbstractCommandListener.handleEvent(Unknown Source)
at com.essbase.eas.framework.server.application.DefaultCommandDispatcher.dispatchEvent(Unknown Source)
at com.essbase.eas.framework.server.application.DefaultEventController.handleEvent(Unknown Source)
at com.essbase.eas.framework.server.application.EventDispatcherWorkListener.handleEvent(Unknown Source)
at com.essbase.eas.framework.server.application.DefaultWorkDispatcher.dispatchEvent(Unknown Source)
at com.essbase.eas.framework.server.application.DefaultEventController.handleEvent(Unknown Source)
at com.essbase.eas.framework.server.application.DefaultApplication.generateWorkEvent(Unknown Source)
at com.essbase.eas.framework.server.application.DefaultServlet.handleRequest(Unknown Source)
at com.essbase.eas.server.AppManServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:711)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595) -
Business Rule Export Not Complete
I have a situation where I am exporting business rules and the codeblock of a few business rules are not included. If I look at the XML, the business rule is there, the name,description, ect, but the node that should have the actual code is either empty or not there. Has anybody experienced this before? We have cycled the services to clean the cache. There aren't any special characters that I would expect to break the xml. We don't get any errors during the export. Anybody ever had this issue?
Try the following
Option 1
EAS console provide the functionality to migrate (rather than export to file) a repository from a source environment to a target environment by direct RDBMS connection.
Refer to page 97 of the HBR administrator guide:
http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/hbradmin.pdf
Option 2
Increase the heap size of the EAS console via the "admincon.lax" file found under Hyperion\AnalyticAdministrationServices\console\bin
The parameter to change is: "-Xmx256M" in the "LAX.NL.JAVA.LAUNCHER.MAIN.METHOD" section of the file.
You can increase it to a maximum of "-Xmx1024M"
Hope this helps.
Cheers
-Manoj -
UDF is not showing at Forecast Form - Row Level
Hi Expert s,
I am facing a hurdle while showing UDFs in the Forecast Row Level .
The UDF is created . but at the Forecast Form , it is not showing at the Row Level as well as it is not showing in the Form Setting .
Thanks
Ashish RanjanHi Ashish......
Unfortunately SAP has given the provision but it seems it does not work.....
It does not display UDF at Forecast level......
Regards,
Rahul -
CRM Business Object BUS1006005 Not Showing In LSMW Object List
I am trying to use Bus. Object BUS1006005 in an LSMW using BAPI. I noticed that I need to generate an ALE interface for the object before LSMW can use it.. Can someone please help me with this? When I drop-down on Business Object in LSMW Attributes, this object does not show on the list, however I noticed that Bus. Objects with ALE Message Types do show up.
Kind Regards,
JasonIDOC Type:It is the Structure and format of the data that is to be exchanged
see the EDBAS table
MESSAGE TYPE: Determines and Processes the various outputs associated with an application document . Mostly used in SD and MM modules
See the EDMSG table
see the link for LSMW-IDOC
http://esnips.com/doc/1cd73c19-4263-42a4-9d6f-ac5487b0ebcb/LSMW-with-Idocs.ppt
LSMW-BAPI
Step-by-Step Guide for using BAPI in LSMW
Note! The screen prints in this article are from ECC 5.0. They may differ slightly in other versions.
Introduction:
This document details the usage of BAPI in LSMW. We have used the example of migration of the purchase order data into SAP.
Pre-requisites:
It is assumed that the reader of this article has the minimum knowledge required on the Business Object, BAPI, Message Types and IDoc Types.
Step-by-Step Procedure:
Details of the BAPI used in this scenario:
Business Object: BUS2012
Method: CreateFromData
Details of Message Type and Basic IDoc Type:
Message Type: PORDCR
Basic IDoc Type: PORDCR02
Lets have a look at the BAPI first, before proceeding to the LSMW:
1. Go to Transaction BAPI
2. Click on Search Button
3. Enter the value BUS2012 and select Obj.type(Technical Object Name
4. Press ENTER
5. Following screen appears:
6. On the left side of the screen, Expand the PurchaseOrder.
7. Select PurchaseOrder and double-click on the same for details.
Building LSMW using BAPI:
1. Go to Transaction LSMW.
2. Enter the Project, Subproject and Object information and click on CREATE.
3. Enter the descriptions for Project, Subproject and Object.
4. Now select Settings à IDoc Inbound Processing
5. IDoc Inbound Processing screen appears. Enter the required details as shown below:
6. Click on Activate IDoc Inbound Processing.
7. Click on Yes when prompted for Activate IDoc Inbound?
8. Hit on Back to return to the main screen.
9. Click on Continue (F8). Following Screen appears:
10. Select the Step 1 Maintain Object Attributes and select Execute.
11. Select the radio button Business Object Method and enter the following details:
Business Object: BUS2012
Method: CreateFromData
Hit ENTER
12. Save and click on BACK button. Following information message is displayed.
13. Now select step 2 Maintain Source Structures and click Execute.
14. In this step, we need to maintain the source structure. In our example, lets consider the example of a file with 2 structures Head and Item data as shown below:
Click on Create and name the source structure as HEADERDATA. Now select HEADERDATA and click on Create again to create the child structure. Following popup appears:
Select Lower Level and click on Continue. Enter the Item data structure name.
Click Save and hit BACK button to go to the main screen.
15. Select step 3 Maintain Source Fields and hit execute.
16. Enter the fields as shown below:
17. Click SAVE and return to main screen.
18. Select step 4 Maintain Structure Relations and click Execute.
Select E1PORDCR and click on CREATE RelationShip. Following screen appears:
Select HEADERDATA and hit ENTER
Similarly do the same for the structure E1BPEKKOA, E1BPEKPOC and E1BPPEKET.
Click Save and return to main screen.
19. Select the step Maintain Field Mapping and Conversion Rules and click on execute. Maintain the Field Mapping as seen below:
20. Select step 7 Maintain Source Files and provide the link for the test file created. (Create a test file with the same structure as defined earlier).
Save and return to main screen.
21. Select the step Assign Files and click on Execute.
Assign the file provided to the source structure. Here the same file is provided for both the structures.
Save and return to the main screen.
22. Select the step Read Data and click on Execute.
Click on Execute.
Return to the main screen.
23. Select the step Display read data and click on execute.
Click on the structure name to get the field level values.
24. Return to main screen and now select Convert Data.
25. Return to the main screen and select Display Converted data.
26. Return to main screen and select Start IDoc generation.
27. Now select the step Start IDoc Processing on the main screen.
28. Return to main screen and click on Create IDoc overview. Here the data record and status records of the IDoc could be viewed
It is given in screen shot.
http://www.****************
LSMW-IDOC
see this and do accordingly
http://esnips.com/doc/1cd73c19-4263-42a4-9d6f-ac5487b0ebcb/LSMW-with-Idocs.ppt
Go through the steps
Hi please go through the following steps for IDOC method
Step 1. Run the transaction ( /nlsmw ) you will reach to the screen
Here you have to specify
Project : 060_BUS_TRANS
Subproject : SERVICE_TICKET
Object : SRV_TICKET_ZSVT
click on the execute button .you will reach the screen :
The screen shows the 15 steps to Run the lsmw
Step 2) select the first step ( Maintain object attributes) and click the execute button.After clicking on the execute button you will reach at. the screen
Here you have to specify ( MEssage type and basic type)
click on the BACK button
Step 3) select the 2nd step ( Maintain source structures) and click the execute button
Here you have to specify the source structures.
Step 4) Select the 3rd step ( Maintain source fields) and click on the execute button :
Here you have to specify the fields present in the source structure
Step 5) select the 4th step ( Maintain structure relationship ) and click on the execute button :
Here you have to specify relationship between source and target structures
Step 6) select the 5th step ( Maintain field mapping ) and click on the exécute button :
Here you have to map the fields between source and target structure. Also you have to apply conversion rules here if any
STEP 7) select the 6th step and click on the exécute button
Here you can define any fixed value or user define routines
Step 8) select the 7th step ( Specify files) and click on the exécute button :
At This screen we have to specify the files for This we should be in change mode .So please click on the button shown in the above screen. After clicking on This button you will be in change mode and will be able to specify the files :
Step 9) select the 8th step ( Assign files) and click on the exécute button
For assigning files yoy should be in change mode do the same thing click on the button as shown in the above screen :
Then assign the files to different structures.
Step 10 ) select the 9th step ( Read Data) and click on the exécute button :
After clicking on the exécute button you will reach to the screen
Again click on the exécute button . After clicking on the exécute button you will reach to the next screen
Here you will see data is read.
Step 11) select the 10th step ( Display read data) and click on the exécute button :
Here you can see your test data present in test files assign to source sturcture
Step 12 ) select the 11th step ( Convert data) and click on the exécute button :
After clicking on the exécute button you will reach to the screen
Click on the exécute button as shown on the : After click on the exécute button you will reach to the next screen
Data is converted
Step 12th ( Display converted data is same as Display read data )
Step 13 ) select the 13th step ( Start idoc generation) and click on the exécute
button :
At this step Idoc is generated using converted data
Step 14) select the 14th step ( Start idoc processing ) and click on the exécute button :
After clicking on the exécute button you will reach to the screen :
And then click on the exécute button : After clicking on the exécute button you will reach to the final processive screen
If data is processed correctly you will see ( 53 Status message with green sign)
http://esnips.com/doc/1cd73c19-4263-42a4-9d6f-ac5487b0ebcb/LSMW-with-Idocs.ppt
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI.ppt
Step-by-Step Guide for using BAPI in LSMW
Note! The screen prints in this article are from ECC 5.0. They may differ slightly in other versions.
Introduction:
This document details the usage of BAPI in LSMW. We have used the example of migration of the purchase order data into SAP.
Pre-requisites:
It is assumed that the reader of this article has the minimum knowledge required on the Business Object, BAPI, Message Types and IDoc Types.
Step-by-Step Procedure:
Details of the BAPI used in this scenario:
Business Object: BUS2012
Method: CreateFromData
Details of Message Type and Basic IDoc Type:
Message Type: PORDCR
Basic IDoc Type: PORDCR02
Lets have a look at the BAPI first, before proceeding to the LSMW:
1. Go to Transaction BAPI
2. Click on Search Button
3. Enter the value BUS2012 and select Obj.type(Technical Object Name
4. Press ENTER
5. Following screen appears:
6. On the left side of the screen, Expand the PurchaseOrder.
7. Select PurchaseOrder and double-click on the same for details.
Building LSMW using BAPI:
1. Go to Transaction LSMW.
2. Enter the Project, Subproject and Object information and click on CREATE.
3. Enter the descriptions for Project, Subproject and Object as prompted.
4. Now select Settings à IDoc Inbound Processing
5. IDoc Inbound Processing screen appears. Enter the required details as shown below:
6. Click on Activate IDoc Inbound Processing.
7. Click on Yes when prompted for Activate IDoc Inbound?
8. Hit on Back to return to the main screen.
9. Click on Continue (F8). Following Screen appears:
10. Select the Step 1 Maintain Object Attributes and select Execute.
11. Select the radio button Business Object Method and enter the following details:
Business Object: BUS2012
Method: CreateFromData
Hit ENTER
12. Save and click on BACK button. Following information message is displayed.
13. Now select step 2 Maintain Source Structures and click Execute.
14. In this step, we need to maintain the source structure. In our example, lets consider the example of a file with 2 structures Head and Item data as shown below:
Click on Create and name the source structure as HEADERDATA. Now select HEADERDATA and click on Create again to create the child structure. Following popup appears:
Select Lower Level and click on Continue. Enter the Item data structure name.
Click Save and hit BACK button to go to the main screen.
15. Select step 3 Maintain Source Fields and hit execute.
16. Enter the fields as shown below:
17. Click SAVE and return to main screen.
18. Select step 4 Maintain Structure Relations and click Execute.
Select E1PORDCR and click on CREATE RelationShip. Following screen appears:
Select HEADERDATA and hit ENTER
Similarly do the same for the structure E1BPEKKOA, E1BPEKPOC and E1BPPEKET.
Click Save and return to main screen.
19. Select the step Maintain Field Mapping and Conversion Rules and click on execute. Maintain the Field Mapping as seen below:
20. Select step 7 Maintain Source Files and provide the link for the test file created. (Create a test file with the same structure as defined earlier).
Save and return to main screen.
21. Select the step Assign Files and click on Execute.
Assign the file provided to the source structure. Here the same file is provided for both the structures.
Save and return to the main screen.
22. Select the step Read Data and click on Execute.
Click on Execute.
Return to the main screen.
23. Select the step Display read data and click on execute.
Click on the structure name to get the field level values.
24. Return to main screen and now select Convert Data.
25. Return to the main screen and select Display Converted data.
26. Return to main screen and select Start IDoc generation.
27. Now select the step Start IDoc Processing on the main screen.
28. Return to main screen and click on Create IDoc overview. Here the data record and status records of the IDoc could be viewed:
Please Go through these Links ,
BAPI with LSMW
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI
For document on using BAPI with LSMW, I suggest you to visit:
http://www.****************/Tutorials/LSMW/BAPIinLSMW/BL1.htm
http://myweb.dal.ca/hchinni/sap/lsmw_home.htm
http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf
bapi-idoc:
http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
Thanks
Naveen khan -
Business rules do not appear in Planning
Hi,
I've created 4 business rules, and assigned myself with Modify privileges, and "Launch and validate" privileges.
Outline has been assigned and the rules validate fine as well.
When login to planning and view the business rules under that plan type, it does not show the rules.
Can anyone help with understanding what this prolem is related to?
Thanks,
AnindyoI assume that you assigned the business rule to the application location? If not, go into the business rule edit mode and check the Location tab. Make sure the application location is added. If it does not seamlessly appear in Planning, then log out then back into the Planning application for the rules to synch with Planning.
-
After completion of Business rule Job Console shows status as Processing
Hi All,
I have installed Oracle EPM 11.1.2 .
When I run rules through Hyperion planning the rules that go in to job console do not show a change of status even though they are completed. I checked Essbase logs which shows that the BR has completed its processing yet in Planning job Console it shows the status as "Processing" .
Please share your thoughts on how to rectify this issue.
Thanks
SauravCheck out:
Business Rules Jobs with Status "Processing" in Planning Web? (Doc ID 966683.1)
Cheers..!!! -
Running Business Rules with global Variables in Composite Forms
Hi,
I am having trouble running Business Rules, that include Global Variables, in composite forms.
I have two forms in the composite form, both have entity in Page dimension set to 'local'. one includes entities at level 3 and the other has entities at level 0. I need to pass this level 0 entity to the business rule, from the form.
When i try to run the rule, it gives me the following error:
"This rule cannot be launched because it has hidden rtp variables without default values "
I get this error even when i set the default value for the global variable.
This rule runs perfectly when run from the individual form (which is part of the composite form).
Please help.
Thanks.Known Issue: 9900514
The Use Members on Data Form and Hide Prompt options for business rules attached to composite data forms apply only for runtime prompt values from the globally shared pages and POVs of a composite data form. In other words, this will only use members that are shared across all component data forms. If users want a business rule to take context from a single component data form, they should attach the business rule to that component data form and include the business rules for that component data form at the composite data form level (<Business rules for componentX>).
Please let me know if this is not what we are talking about.
Thank you,
Todd Rebner -
Business rule provision not reflecting in planning
Hi,
We are using Calc manager + classic planning app(11.1.2.1).Following are the steps I have performed.
1. Assigned 'basic' role for business rules to a group in shared services.
2. In planning-->admin --> business rule security, i assigned launch access for this group to a folder containing several business rules.
3. When i open up planning, I am unable to see the business rules associated with the forms. so it doesnt run on save.
Btw, I refreshed security as well. Am i missing something.??
Regards,
NBut we are using calculation manager. I created a new id and assigned all the groups that an existing user has. When i login with the new id, I can see the business rules, but the existing users cannot see them.
Please help.. -
BLOB column's image is not showing up in Forms
Hi All,
I am using Forms 10g. I created a default form (using wizard) for a table that has a BLOB column. Form builder automatically created an image item that corresponds to the BLOB column. The problem is that when I run the, the image item is always blank, and is not showing any image. Although I know that the BLOB column contains valid images, which I can see using PL/SQL developer tool.
The form is compiling without error, and also, there is no runtime error message. So without reporting a compile time/runtime error, the Form is not showing the image. Can anybody help me plz??? this is urgent, any help will be greatly appreciated.
Thanks in Advance.Hi,
I am simply using the Forms default "EnterQuery" and "ExecuteQuery" buttons. I have not written a single line of code. That is, just using the forms default funcionality.
Thanks. -
Amended Columns in IR not showing in Edit Form
Hi,
I Created a IR report using A form on a report wizard. I have now changed the underlying query in the IR and it is showing correct. When I click on Edit, the records are not forwarded to the form. Even the new fields in the IR are not reflected in the form. Where do I update the Underlying query for the Form?
Regards
DavidThanks, I have seen the problem
-
Business rule to use page member on form
Hi all,
I need to create a business rule which uses a page member on the form. Created a RTP variable and used it in the Rule.Attached the rule and selected "use members on the form" and "Hide Prompt".But, Is still asking for prompt. How to unhide the prompt?Is it a calc manage rule or an EAS business rule, which version of planning.
Cheers
John -
Calendar Lov not showing in custom forms on EBS 12.1.1
Hi,
Previously i worked on Oracle Forms 6i but at present i am working on Forms 10g (Forms [32 Bit] Version 10.1.2.0.2 (Production)) with no patch.
I build the custom forms and compile that in custom top on EBS 12.1.1 but the calendar lov is not showing.
Build Step.
Used TEMPLATE.fmb for scratch.
Field name -Order date, Item Type- TextItem, SubclassInformation- TEXT_ITEM_DATE, DataType-Datetime, FormatMask -DD-MON-YYYY HH24:MI:SS,
List Of Values- ENABLE_LIST_LAMP, Validate Form List- No
Add 'KEY-LISTVAL' trigger in ORDER_DATE field and write 'calendar.show;' Trigger text but it's not working.
If Above steps apply on forms-6i then calendar lov populated on EBS 11.5.10.2.
I know this is very old topic and found lots of post for this topic but none of them help me.
Could any one help me if anything i missed for Forms-10g with EBS12.1.1 ?
Thanks in advance.Hi Srini,
Thanks for your reply.
You can see i followed the all the above steps as mentioned in the article.
But still it's not working.
If you implemented the Calendar LOV in EBS12.1.1 through forms 10g then please give me your steps.
AS per my understanding the below is the required steps.
1. Item Type - Text Item
2. Subclass Information - TEXT_ITEM_DATE
3. Data Type - Datetime or Date
4. List of Values - Enable_List_Lamp
5.Add key-LISTVAL trigger and written calendar.show;
Thanks
Edited by: user10977928 on Aug 6, 2012 1:25 AM -
Business rule trigger not calling the procedure in my code
Good morning every one,
I have a small problem with two of my business rule triggers.
I have these tables:
pms_activity
csh_cash
csh_integrate_leh
csh_integrate_led
and my process goes like this:
upon approval of a row in my pms_activity table I have a trigger that insert a row in my csh_cash - and in the csh_cash table I have a trigger that will insert in the csh_ingerate_leh and csh_integrate_led.
my problem is pms_activity does generate a row in csh_cash but the trigger in the cash does not fire to generate a row in the csh_integrate_leh and led tables.
I have generated in the following order after I created my business rule:
I have generated the table from the designer (server module tab)
I have generated the CAPI from the head start utility
I have generated the API from the designer
I have generated the CAPI from the designer
I have run the recompil.sql
I have checked that my business rule trigger is enabled and should run on insert and no where restriction
=== this is my business rule logic ======
l_rule_ok boolean := true;
begin
trace('br_csh001_cev (f)');
csh_gl_pkg.csh_gen_integ_jvs(p_id
,p_ref_num
,p_own_id
,p_trt_id
,p_value_date
,p_description
,p_amount
,p_cur_id
,p_gla_dr
,p_gla_cr
,p_gla_pl
,p_gla_rev
,p_gla_eqt);
return l_rule_ok;
exception
when others
then
qms$errors.unhandled_exception(PACKAGE_NAME||'.br_csh001_cev (f)');
end br_csh001_cev;
==== end =======================
Any help will be appreciated as I have struggled with this for two days.
ThanksHaroon,
SAP does not allow Stored Procedures to be used as part of the SAP Business Db or to be used to access SAP Business One tables directly for Insert, Update or Delete. Any interaction with the SAP Business One Db is required to go through the SAP Business One API's, namely the DI and UI API's.
Eddy
Maybe you are looking for
-
Really at a loss on this., both apexins and apxldimg give 'file not found'
I am sure the correct parameter is being supplied. This is on windows 7 64 bit platform. SQL> @apxldimg C: PL/SQL procedure successfully completed. old 1: create directory APEX_IMAGES as '&1\apex\images' new 1: create directory APEX_IMAGES as 'C:\ape
-
Process_order api - Validation Failed for Field Bill To
I am relatively new to the EBS world and I'm having some issues with calling the OE_Order_Pub.Process_order API. When I call this API I am getting a return error of "Validation failed for field - Bill To". For a background...I have an APEX applicatio
-
Hi all, I've a question about Customizing or Extending ADDT: Adobe allows users to modify certain files in the Dreamweaver Configuration, does this include ADDT? Can Third-party extensions use the ADDT API in order to be compatible with or extend ADD
-
Hello, Wanted to know in Seeburger AS2 Recv Adapter : while authneticating : what is realm field? Realm signifies ? Thank You
-
Is there any Closed Caption material on iTunes?
Apple TV has the option to enable Closed Captioning under Video in Settings, but are there any movies that will display closed captioning when this option is enabled? Thanks....