Business Rules Instance disappeard in projects folder in Shared Services

Hi all,
I have this strange thing happend to me today morning. when i logged into the Shared Services i can find the Business Rules folder but i couldnt find the instance for it.Is there any way i can reconfigure it so that i can see the instance back again in Shared Services.
Environment: Windows server, Hyperion version 9.3.1
Any help on this would be greatly appreciated.
Thanks in Advance

Please find the error log below
com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
java.lang.Exception: Registeration failed: error.generalSaveModel.Registeration failed: error.generalSaveModel.
     at com.hyperion.cis.config.CmsRegistrationUtil.registerApplication(CmsRegistrationUtil.java:222)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeHubRegistrationTask(RunAllTasksWizardAction.java:360)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:165)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
Thanks

Similar Messages

Assign Analytic Servers under Projects folder in Shared Services

Hello experts,
The problem is that: we are migrating dev environment to a new test environment. All is done, but when I try to assign "Administrator" role for Essbase server to an especific user, I can't see "Analytic Servers" option under Projects folder in Shared Services (where is Essbase server in dev environment).
How can I assign that role if I can't see Essbase server in Shared Services? Can I assign it? How?
Thanks for your time!
Best Regards
Edited by: user1654709 on 31-ago-2012 10:37

Hi,
You can do the following:
1. Launch the MaxL Prompt and connect to Essbase Server using the Administrative user
2. Execute the following:
alter system resync sss;
alter application all reregister;
If the Essbase security is externalized, the above commands will execute successfully. If Essbase is not registered to Shared Services, then you execute the following command:
MAXL> display system security mode;
+.....If it is 1 then run the alter command:+
MAXL> alter system set sss_mode <ENFORCE-PWD-SPEC>;
Please read http://docs.oracle.com/cd/E17236_01/epm.1112/esb_tech_ref.pdf page 671 regarding <ENFORCE-PWD-SPEC> option to decide (depending on number of users on the system) what "password option" is best for you.
After successful, externalization of security, then execute again the following:
MAXL>alter system resync sss;
MAXL>alter application all reregister;
Hope it helps....
KosuruS
Edited by: KosuruS on Sep 6, 2012 12:02 PM
Edited by: KosuruS on Sep 6, 2012 12:03 PM

Projects dropped from shared services when creating an essbase application

When we try to create an essbase application via EAS - there is an error message Unable to createExternalUser. then when we log in to shared services - there are no projects available.
This is for version 9.3.1.0

Hi Cameron,
many thanks for your answer.
Well let me explain a little bit further:
I created an own security module which manages the whole security in Essbase. I get the grants from a corporate system and then just apply them by some definitions natively in Essbase using filters etc.
To make sure the grants on the server are exactly the same as the grants that get delivered to me, I export the complete security in Essbase using MaxL and import it to a relational DB. I then check whether there are any grants which shouldn't be there and vice versa.
If now an admin user creates an application, he gets an additional application manager grant for this application. He does not loose his admin permissions.
Now in my check this application manager grant pops up as this grant is not in the corporate system but created Essbase internally when a application is created.
If I export the complete security this application manager grant is there.
I would like to get rid of these errors in my check. Also it makes no sense that an admin user gets an Application Manager grant because he already has that permission as an admin user.
I already searched the documentations but didn't find a setting to disable this behaviour of Essbase.
Btw. Essbase version is 11.1.1.3.
Maybe someone of you guys know if there is any chance to do this - if not, I have to find another solution.
Thanks and kind regards,
Thomas

Configuring an Additional Instance of Essbase Server to one shared service

Hi ,
I currently have two separate installation of shared services with its own Essbase server(version EPM 11.1.1.1). I want to shut down one shared service and keep both the Essbase servers up pointing to only one shared services.
Can we have two independent installation of Essbase servers point to one shared service . If yes , can you direct ,me to the correct document or steps.
Thanks
1661623

Started finally.
Seems like 32 bit service application as it still requires DWORD not QWord.
https://support.microsoft.com/en-us/kb/2910363
Hyder Zaidi

Business rules cannot be opened through EAS

Hi all,
Currently we are on the System 9.3.1 version. Today when i was trying to open the Business Rules through EAS it just shows the following error message "Exception occurred. Please check your log file for details." and the rules do not open.I dont know where to check the logs.
Please help me out in how to fix this issue.
Thanks in Advance

Is this not the same issue as your previous post Re: Business Rules Instance disappeard in projects folder in Shared Services
Cheers
John
http://john-goodwin.blogspot.com/

Exporting business rules

I'm using the instructions from the following thread, Re: Steps to migrate Hyperion Planning application from 9.2.0 to new 9.3.1 env to copy a Planning application from version 9.2.0.2 to 9.3.1. There is a reference in these instructions to export the business rules using Administration Services. I only see options for Business Rules to either copy or export to shared services in the 9.2.0.2 version of the AAS Console. Which one of these options should I use or is there someplace else I should look to export the business rules.
Thanks,
Tom

Yes, the user Id. is an admin for business rules. It may be a configuration issue. I get the following message when I try to click on a rule under Business Rules in Shared Services.
Refer to your Admin Guide to configure security privileges for this application.
I get this message in both the 9.2.0.2 environment and 9.3.1 environment. The user is an admin for Business Rules in the 9.3.1 environment also.
The application does not use forms which I beleive is what Business Rules are used for. Not sure if they are used for anything else. Is it safe that I can ignore the business rules in the 9.3.1 environment or am I missing a critical piece that needs to be included in the 9.3.1 environment.
Thanks,
Tom

Business Rules login failed

When I try to access to the Business Rules in the EAS Enterprise View (I'm logged as admin), it says
"Business Rules Login Failed"
If I go in Shared Services I can't provision additional roles to the admin user because the role related to Business Rules is not present.
It seems that Business Rules is not correctly configured.
So what I have to do?
Thanks.

Hi,
1. When you login into Shared services, on left hand side ,you see User directories and Application groups.
2. Expand "Application groups" , here do you see Business Rules.
3. You are telling us ,after you have expanded essbase, thats not needed.
Hope this is clear to you
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

Access to Business Rules in AAS

We have System 9.2.0.1 and when my user logs into AAS, they cannot view the Business Rules section. what is the proper access to grant in Shared Services for them to see the Business Rules?
Thanks

Ok I did not realize that there is an extra step to allow the user to see the Business rules once you provision them. I needed to log into AAS as an Admin, go to Business Rules Section, go to Administration Folder and right click and pick Refresh Users List. This apparently refreshes the list of users able to access Business Rules in AAS after they have been provisioned. Another solution is of course to stop and start the AAS service which is not practical to do during a workday.

How to Load Business Rule XML in 9.3.1

Hello,
I am using EAS 9.3.1. On the Business Rules component, I selected Export Business Rules, and it invited me to export all business rules, variables, macros, and projects into one xml file. Now I cannot figure out how to load that xml file. I am copying from a production environment to a development environment, because we moved the database of the development environment to another server. I have reconfigured the applications and databases. What do I have to do to load the xml file?
Thank you,

Thank you. I was getting the following error, and I thought it meant, I cannot expand the Business Rules icon because I did not have any business rules. If this something I configured incorrectly, or something the DBA missed?
Error logging in to Business Rules. The repository has not been configured or you are not authorized to use Business Rules.
Detail:Error creating DBConfig object. Please check if there are exceptions in the log file and if HBR is configured correctly.
Detail:null

BPM error when opening a business rule task

I am using a created installation of BPM 12c from the ( summer camp ).
I am in the BPM composer and I now get the following error whenever I do a right click on a bussiness rule task and then select Open Business Rule
"A connection to the server has failed. (status=500)". This happens on all the business rule task, in all projects.
I can open the rule via de Project Home, tabe business rule without problem.
in the AdminServer-diagnostic.log I see the following error whenever it happens:
[2015-03-02T01:19:02.192-08:00] [AdminServer] [WARNING] [] [org.apache.myfaces.trinidadinternal.context.RequestContextImpl] [tid: [ACTIVE].ExecuteThread: '13' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 07a7f8c3-6942-427c-b8c1-658f66c0fea9-00001043,0] [APP: BPMComposer] [DSID: 0000KjPddG7Fw000jzwkno1KvmvP000006] Could not find partial trigger showDoc_cb from RichTable[org.apache.myfaces.trinidad.component.UIXTable$RowKeyFacesBeanWrapper@262f2fe1, id=t1NarrativeActivityTable] with the supported partialTriggers syntax. The partial trigger was found with the deprecated syntax. Please use the supported syntax.
The java version of the installation is:
[oracle@soabpm-vm ~]$ java -version
java version "1.7.0_55"
Java(TM) SE Runtime Environment (build 1.7.0_55-b13)

Check this out:
Cannot open WebForm in 12c BPM Composer (Doc ID 1950751.1)

Validate ADF UI field as per Oracle Business Rules

Hi ,
I have a requirement where the relationship between the various data fields are defined in Oracle Business Rule 11g inside BPM Project.I need to call these rules on ADF screens for data population.
Eg, If there are two fields on ADF UI,field1 and fiedl2.
Possible combinations of the two field are:
Field1 Field2
A B
C D
E null
The rules are part of OBPM 11g project as customer can change the rules through composer at run time as per business need.
How can i achieve this requirement.Please help urgent.
Regards...

Hi Daniel
Lets say i have two attribute 'Product Code' and 'Department id'.The relationship between the two attributes is defined in Oracle Business Rule.
eg.
If Product Code is '111' then Department is 'Finance'
If Product Code is '222' then Department is 'Inventory'
The values for each of the attribute is defined in a database
Product Code Table
Value Description
111 SalaryAllowance
222 Current Stock
Department Table
Value Description
Finance Handles Payroll
Inventory Handles Packaging
I am displaying these two attribute on the ADF UI as dropdowns. If I select '111' from the product code dropdown then the value in Department dropdown should automatically be set as 'Finance'.I need to trigger the validation/relationship between the attributes from business rules.
The reason for keeping the relationship in rules is because business wants to change these relationships at run time.
Hope the scenario is clear to you.
Regards...

Deferred Syntax Error : ADF Business Rules

Hi all,
I am working on business rule implementation in my project . I have created a dictionary (.rule) file and added oracle rules and oracle rule editor component libraries to the project . The page fragement contains the rulesdc component which reads the dictionary file from a path . i have also added oracle.soa.rules_dict_dc.webapp.war to the integerated WLS Deployments section. when i run the page i get an error ' Error: Encountered deferred syntax #{ in template text. If intended as a literal, escape it or set directive deferredSyntaxAllowedAsLiteral' . I have also tried with having deferredSyntaxAllowedAsLiteral value true in the page which contains the rulesdc component but no use. the error still persists .
can anybody help in this case?
Thanx in advance

Thank you for pointing this out.
I'm currently browsing metalink kb but "7021469 - Business Rules should support dataexport and dataimportbin functionality" provides no results.
hbr_93300_readme.pdf refers indeee to that issue but I cannot upgrade to that version (because, as stated in that pdf, I should upgrade all prouducts to 9.3.3)
You said it might be solved in Administration Services release 9.3.1.5 (I believe 9.3.1.1.5 was a typo), but the readme does not mention it...

How to deregister epm instances from shared services

Hi All,
I had Hyperion EPM 11.1.2.1 on Windows Server A and repsitories on Oracle Database B.
I freshly installed Hyperion EPM 11.1.2.1 on Windows Server C and configured it with repositories on Oracle Database D (which are exact replica of repositories on Oracle Database B).
Now what I'm stuck with is that shared services on Windows Server C is still configured with Essbase/Planning instance of Windows Server A as well. This is creating problems for me when I try to access calculation manager on Windows Server C and I see Essbase/Planning applications from Essbase instance of Windows Server A.
Is there anyway I can deregister the entire epm instance of Windows Server A from shared services on Windows Server C?
I don't want any connections between EPM on Windows C and EPM on Windows A because soon windows server A will be retired.
Any help will be much appreciated.
Best regards,
Jayant Sahewal

Removing instances in 11.1.2.1 is not so easy, it is not until 11.1.2.3 that there is an option to remove an instance, in 11.1.2.1 you really have to uninstall products to remove them from the registry, then also try applying the registry cleaner patch to see if it helps, if it doesn't then look at the epmsys_registry utility to delete entries from the registry.
Cheers
John
http://john-goodwin.blogspot.com/

Business Rule to folder, how?

Hi,
Sorry for the newbie question, I have a good deal of experience with Essbase but am finding Hyperion Planning 11.1.2.2 a little strange...
As administrator I create folders to hold Business Rules, from Hyperion Planning, under Business Rule Folders, create new folder.
Now the manual tells me to use 'Calculation Manager', but does not say where to find this.
In the absence of this being accessible from Hyperion Planning or Workspace I go to EAS, create a new business rule and then log back into Hyperion Planning and can see that business rule is now available to launch under 'Tools > Business Rules'
However, I cannot seem to find a way to move this business rule into my folder structure.
Can anyone advise; -
1. Am I accessing the right calculation manager
2. If yes to above is there an extra step to put it in an appropriate folder, and if so where. If not where do I find the 'Calculation Manager' in question?
And yes, I am using the same admin user at all points in the process. And yes task list, form et al forms / folders work fine for me.
Easy points for the answer!!
thanks,
Robert.

Hi
The Business Rules folder within Hyperion Planning is only used when you have enabled Calculation Manager as you chosen option of calculation type when creating the application.
When you first created the application you would have been given an option of Business Rules or Calculation manager on the very first screen. If you chose Business Rules then the Business Rules folder section within Hyperion Planning means nothing. However if you selected Calculation Manger at setup then Business Rule folders will allow you to group you Rules created from within Calculation Manager.
The choice though of Business Rules was removed by the version you are running
To get to Calculation Manager, Navigate->Administer->Calculation Manager.
If you cannot see it then you havent got Calculation Manager running or setup.
Thanks
Anthony

Business Rules Project Takes Too Long to Open

Does anyone know why it takes too long (~3-5 minutes) to open/edit a security project definded for assigning business rules to planning application forms? We are using Hyperion v11.1.1.3.0. Essbase is on Windows server, Shared Services on Solaris 10 Unix. Even before we migrated Essbase to Windows to gain better performance running calcs, opening projects using EAS has always been very slow to open. Please advice if there is a way to improve performance on this.

Clear Cookies & Cache
* https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
Clear the Network Cache
* https://support.mozilla.com/en-US/kb/How%20to%20clear%20the%20cache#w_clear-the-cache
Firefox takes a long time to start up
* https://support.mozilla.com/en-US/kb/firefox-takes-long-time-start-up
Check and tell if its working.

Business Rules Instance disappeard in projects folder in Shared Services

Similar Messages

Maybe you are looking for