Business Server exception: attempt to establish connection failed.

Hi.
I'm a total newbie to the BPA Suite, but I have experience with other tool sets like MEGA. I've downloaded and installed an evaluation copy of version 10.1.3.4 of the tool.
I'm working through the Business Process Architect Quick Start Guide, going through the sample Quote to Cash process. Everything is progressing relatively well as I go through the document (except that the QuoteToCash project is already loaded in the LOCAL business repository without me having to load it separately), until I get to the first simulation.
When I go to the Simulation module, I get an error: "Server access exception: Business Server exception: attempt to establish connection failed."
I don't know what's wrong, but there are a couple of things I'm thinking about. One is that I didn't install XE separately, so I think that I'm just using the default Oracle Lite instance that gets installed with the tool. Another is that my account is configured without administrator privileges, so I generally have to run installers as a separate user with administrator privileges to get things to work.
Any suggestions would be greatly appreciated!
Thanks.

It might be bad form to answer your own question, but after further experimentation, I think that it's a permissions problem.
I repeated the installation on another (virtual) machine on an account that is an administrator, and I can simulate the Process Order process as described in the Quick Start Guide to my heart's content.
Now, the second machine isn't configured exactly the same as the first machine, so there could be other underlying or contributing factors. But I'm un-stuck for now.
I just thought I'd share what I found. Thanks.

Similar Messages

Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!

Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!

... when i click go - connect to server, it comes up with connection failed.
If you're trying to connect to a Bonjour server on the remote network, that won't work over a layer 3 VPN. Use something like Hamachi or one of the SSH-tunnelling Bonjour proxy apps for that.

Small Business Server 2011 Essentials Remote Web Access fails to connect to Windows 8.1 PC

I am using Remote Web Access (RWA) gateway with Small Business Server 2011 Essentials.
There are several workstations all running Windows 7, and have been using RWA without an issue for well over a year.
There is now a Windows 8.1 Pro PC added to this domain, but the Remote Desktop does not connect.
The Windows 8.1 PC appears in the RWA pages, It requests the credentials to connect, and then fails with the following error:
Remote Desktop can't find the remote computer "COMPUTERNAME". This might mean that the "COMPUTERNAME" does not belong to the specified network. Verify the computer name and domain that you are typing to connect to.
I can connect to all other PC fine (running Windows 7). I have tried from different locations and PC's and the results are the same.
I thought I had fixed this problem a few weeks back. After running all updates on the server and Windows 8.1 PC, and rebooting both, the RDP worked, but I think it only worked once and then failed the next time someone tried to use it. I have not had
a successful connection to the Windows 8.1 PC since.
I am at a loss on how to troubleshoot this as there are no errors on the system which can't be accessed.
Any suggestions will be appreciated.

Hi Mr Cheese,
à
I turned off the Firewall on the Windows 8.1 PC and the RDP is now working.
Thanks for sharing in the forum. Your time and efforts are highly appreciated.
Based on your description, this issue is related to Firewall. Would you please let me know current situation
of this issue?
Just addition. Please open Control Panel, select Windows Firewall and click Allow an app or feature through
Windows Firewall. Then please check if Remote Desktop is allowed. Meanwhile, please click Advanced settings in Windows Firewall panel and click Inbound Rules, then check if rules which be related to Remote Desktop were enabled.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Uncaught exception 'RTCError' with message 'connection-failed' in lccs.php:729

I am unable to connect to my account.
I get the above mentioned exception.
I have lccs version 1.3.5 and my php version is 5.2.9
Its an apcahe running on windows vista.
I just have the following code on the server:
include "lccs.php";
$am = new RTCAccount("https://collaboration.adobelivecycle.com/rkcloud");

Do you have the SSL module loaded/enabled in PHP ?
Call the "phpinfo()" function in a PHP page and check that the SSL module is correctly configured. You should see something similar to the following messages:
Registered Stream Socket Transports
tcp, udp, unix, udg, ssl, sslv3, sslv2, tls
Loaded Modules
core prefork http_core mod_so mod_auth_basic mod_auth_digest mod_authn_file mod_authn_alias mod_authn_anon mod_authn_dbm mod_authn_default mod_authz_host mod_authz_user mod_authz_owner mod_authz_groupfile mod_authz_dbm mod_authz_default util_ldap mod_authnz_ldap mod_include mod_log_config mod_logio mod_env mod_ext_filter mod_mime_magic mod_expires mod_deflate mod_headers mod_usertrack mod_setenvif mod_mime mod_dav mod_status mod_autoindex mod_info mod_dav_fs mod_vhost_alias mod_negotiation mod_dir mod_actions mod_speling mod_userdir mod_alias mod_rewrite mod_proxy mod_proxy_balancer mod_proxy_ftp mod_proxy_http mod_proxy_connect mod_cache mod_suexec mod_disk_cache mod_file_cache mod_mem_cache mod_cgi mod_php5 mod_ssl
curl
CURL support
enabled
CURL Information
libcurl/7.15.5 OpenSSL/0.9.8b zlib/1.2.3 libidn/0.6.5
openssl
OpenSSL support
enabled
OpenSSL Version
OpenSSL 0.9.8b 04 May 2006
Also check your error_log file in the Apache log directory: it should give you more information of what the real cause of the problem is.

Server 2012 gpo deploy printer connection failed.

Run gpresult.exe /f /h gpresult.html from a command prompt on effected machines and look at what the problem is when applying that GPO.
Post results if you need help understanding it.

Hi,
I want to deploy 5 printers on a domain using gpo.I created a GP to deploy a printer connection to computers in an OU that contained only one computer. The GP also created a mapped drive for the user on the computer. The test was successful but when I added multiple printers and copied the GP to another OU the drive was successfully mapped on all machines but the printers did not appear in the list of printers available on the machines. I decided to remove the printers and place them in a separate OU but when I try to add the printers to the new OU I get an error stating "the specified domain either does not exist or cannot be contacted."
Any help on this would be appreciated. Thanks in advance.
This topic first appeared in the Spiceworks Community

Unable to find error Text for this exception/Attempt To open workbook fail

Hi,
I am getting this error when I am trying to run a workbook. I had changed one of the folders name in the business area. That folder had a item which was one of the parameters of the workbook.
Can somebody please help me revert back.If I want to change any folders name,is it not possible.
Thanks in advance

You're allowed to change the folder name or the id name (via properties) but just not both at the same time (plus database reports have to be opened and saved).
But just changing the display name for an item shouldn't cause a problem (because Disco doesn't really look for the display name - it's just for us to understand what it is/does).
I think you'd know, but is it possible you changed the id name in properties to one that already existed and therefore someone's got an extension of _1 added?
Russ

SQL azure connectivity fails all of a sudden

Hi, I have a website hosted on GoDaddy server and many users access this website with their respective username and passwords. My database is in Azure. All of a sudden when the users of this website try to access the website with their username and password
they fail to be identified as valid users though they are valid.
consequently when such a thing happens almost for more than 5 mins no user can login to the website. but i can very well connect to the database from my local server or through the azure portal.
the series of errors that gets logged into event viewer are as follows:
1. System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
2. System.Data.SqlClient.SqlException: a transport-level error has occured when sending the request to the server.(provider:TCP provider,error:0 - An existing connection was forcibly closed by the remote host.)
3. System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured
to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)
4. SourceEdge.BCL.BCLException: Unable to Execute ---> System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
5. System.ArgumentNullException: Value cannot be null.
Parameter name: connection
after the error shown in 5 occurs all the subsequent logins will result in invalid user though the values are not null.
Can you tell me why this error happens all of a sudden. but it gets back to normal after a few minutes or even takes hours sometimes.

Hey there and apologies for the slow response. Is this still an issue for you? And do you still need help?
Thanks Guy

Could Not Establish Connection to AS Java with Available Profiles

Hi All,
I am installing AS Java on SAP Netweaver 7.4 SR2.
OS: Windows Server 2008r2 and DB: MSSQLSever 2012
During the installation I got the below error on 28th Phase out of 29th.
"Deploy Java Components"
Below is the Error Log as extracted from SAPINST Log File
[ Error ] Could not establish connection to AS Java on [WIN-9OD90N7C:50204]. Cannot establish connection with any of the available profiles:
url=WIN-9OD90N7C:50204 protocol=p4 (None); Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 192.168.245.130 and port: 50204
Check if server is started, access point for the protocol is available, and IP/Host name is accessible on network.. Check if the host and port specified are correct and AS Java is up and running.
[ LOG EXCEPTION ] :: Could not establish connection to AS Java on [WIN-9OD90N7C:50204]. Cannot establish connection with any of the available profiles:
url=WIN-9OD90N7C:50204 protocol=p4 (None); Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 192.168.245.130 and port: 50204
Check if server is started, access point for the protocol is available, and IP/Host name is accessible on network.. Check if the host and port specified are correct and AS Java is up and running.
javax.naming.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.interfaces.cross.DestinationException: Cannot establish connection with any of the available profiles:
url=WIN-9OD90N7C:50204 protocol=p4 (None); Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 192.168.245.130 and port: 50204
Check if server is started, access point for the protocol is available, and IP/Host name is accessible on network.]
at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:386)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at com.sap.engine.services.dc.api.session.impl.SessionImpl.getContext(SessionImpl.java:215)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.reconnectDeployer(DeployProcessorImpl.java:1954)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.waitResultForOfflineDeploy(DeployProcessorImpl.java:1626)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deployItems(DeployProcessorImpl.java:903)
at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deploy(DeployProcessorImpl.java:259)
at com.sap.engine.services.dc.api.cmd.deploy.DeployCommand.performOperation(DeployCommand.java:208)
at com.sap.engine.services.dc.api.cmd.deploy.DeployCommand.executeCommand(DeployCommand.java:540)
at com.sap.engine.services.dc.api.cmd.AbstractCommand.execute(AbstractCommand.java:197)
at com.sap.engine.services.dc.api.cmd.Runner.execute(Runner.java:37)
at com.sap.engine.services.dc.api.cmd.Runner.main(Runner.java:61)
Caused by: com.sap.engine.interfaces.cross.DestinationException: Cannot establish connection with any of the available profiles:
url=WIN-9OD90N7C:50204 protocol=p4 (None); Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 192.168.245.130 and port: 50204
Check if server is started, access point for the protocol is available, and IP/Host name is accessible on network.
at com.sap.engine.interfaces.cross.Destination.getNextAvailableBroker(Destination.java:64)
at com.sap.engine.interfaces.cross.Destination.getRemoteBroker(Destination.java:39)
at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:298)
... 14 more
Thanks and Regards
Anurag

Hi Anurag
Could you refer the SAP Notes for your issue
1571274 - Cannot connect to server using message server ms://
1925352 - How to check the access points (or ports) being used by a live SAP J2EE server
BR
SS

Erro: connect failed due to DbSL load lib failure

Error when trying to transport request
Error Attach.
My database is SQL 2008
Version of the kernel source: 201
Version of the kernel target: 225
Can you help me?
Tks,
Renato

Hi,
I include the environment variables that were gone and rebooted the server, the error changed:
Erro: connect failed
Error code 0232
Tks,
Renato

Establishing Socket Connection to a slow or busy server

Currently, I'm developing an AIM-based BOT application in Java and it requires establishing a socket connection to their free and public server (host: toc.oscar.aol.com, port: 9898).
About 75% of the time a connection will be successfully established using this:
oConnection = new Socket("toc.oscar.aol.com", 9898);
25% of the time when a connection fails (timeout) is due to the server being too slow or busy to respond to the connection request; however, the server will eventually response within 40 to 60 seconds.
Let me go into details with my findings when attempting to connect to the slow/busy server:
For experimental purposes, I used the telnet command (via the DOS command prompt: "telnet toc.oscar.aol.com 9898"), the connection will be established usually within 40 to 60 seconds.
As I said before, the BOT application is developed in a Java environment and when attempting to establish a connection (using Java's Socket), a timeout exception gets raised when it hits the 20-seconds mark. It tells me that the Java Socket has the timeout defaulted to 20-seconds.
I am aware that we can define the timeout settings using Socket's "setSoTimeout(x)" method; however, it's only good for AFTER a connection is established.
Now, to sum up my findings � it clearly shows that the DOS' telnet prompt has longer "wait time" before raising any exceptions. As far as Java Socket is concerned, if a connection is not established within 20 seconds, it raises the timeout exception.
Is there a way to stretch the "wait time" or "timeout" to be longer than 20 seconds for when a socket connection is being attempted?
Millions of thanks in advance,
Chad W. Taylor

Yes, I also tried that option but no cigar. That
timeout value is an alternative way of using
setSoTimeout(int).
I don't think so.
First the Java documentation would not make sense:
public void connect(SocketAddress endpoint, int timeout)
throws IOException
Connects this socket to the server with a specified timeout value. A timeout of zero is interpreted as an infinite timeout. The connection will then block until established or an error occurs.
Parameters:
endpoint - the SocketAddress
timeout - the timeout value to be used in milliseconds.
Throws:
IOException - if an error occurs during the connection
SocketTimeoutException - if timeout expires before connecting
IllegalBlockingModeException - if this socket has an associated channel, and the channel is in non-blocking mode
IllegalArgumentException - if endpoint is null or is a SocketAddress subclass not supported by this socket
Since: 1.4
Second my tests indicate otherwise:
public class Main {
public static void main(String[] args) {
try {
     Socket conn = new Socket();
     conn.connect(new InetSocketAddress(InetAddress.getByName("toc.oscar.aol.com"),9898), Integer.parseInt(args[0]));
     System.out.println("connected under " + args[0] + " seconds");
     conn.close();
} catch (Exception e) {
     System.out.println("not connected in " + args[0] + " seconds");
     e.printStackTrace();
Different runs show:
connected under 120 seconds
and
not connected in 20 seconds
java.net.SocketTimeoutException: connect timed out
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(Unknown Source)
     at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
     at java.net.PlainSocketImpl.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at Main.main(Main.java:21)
I speculate that the "Connection Request Timeout"
value is platform dependent because when I use a
different machine, the request timeout is either
longer or shorter than 20 seconds.
That could well be the case.
So the proper question would be -- where is the Java
Socket borrowing the timeout value from? The settings
in Winsock?
That I don't know.
Andreas
Chad

SQL Server Reporting services. failed to establish connection with project server. verify the url is correct.

Dear All,
I'm working on reporting of Project Server 2010, while configuring SQL SERVER REPORTING SERVICES faced issue after two complete days of troubleshooting along with this gone through plenty of forums, unable to figure out any solution. So finally posting on
technet in order to find solution.
ISSUE/PROBLEM:
At initial configured the SQL REPORTING CONFIGURATION to sharepoint integrated database (SQL SERVER is installed on seperate machine), change the service to Domain Account and also installed sharepoint add in on server story was fine at this point. Furthur
moving to SHAREPOINT ADMIN console and while configuring the Sharepoint Integrated Reporting continuously facing this error:
Failed to establish connection with report server. . . . (Snapshot is attached for your further reference).
My point of concern is that whenerver i try to open the REPORT SERVER URL on project server machine it prompts me to enter username and password but whenever i insert the domain credentails it didnt accept though it can be accesible by using the credentials
of Local Admin of sql server machine. So i wana come to know whether its permission issue if yes then where i should mention the domain credentials.?
REGARDS DANISH DANIE

Dear Paul,
I am able to open the URL (http://psdb/ReportServer )using
domian credential and page open with these contents
Reporting Services Error
The configuration parameter SharePointIntegrated is set to True but Share Point Object Model cannot be loaded
Second,
Configured the SPN on domain controller , performed the steps required to change the AUTHENTICATION in rsreportserver.config
file also done the registry settings to disable the loop back settings.
Same error still ! .... what should i do now ???
REGARDS DANISH DANIE

The attempt to connect to the server (IP address) on port 443 failed - OLT

Hi all
I am facing one problem, if i run load to any application for 100 users for 1 iteration then it is not showing any error. Lets say i ran the load of 100 users for one hour then for some users there are errors like
Line: (script.java:84)][ScriptException]: The attempt to connect to the server (IP address) on port 443 failed.
And my understanding is the user's which are facing failures is not able to get response or page loaded at their end. As failures are occuring for some particular steps not the entire scenario. Pls confirm.
Thanks

I believe that's an indication that there is an error receiving mail, but if you have any drafts or email in your outgoing mailbox, try deleting them. Apple's troubleshooting steps for this are (from http://support.apple.com/kb/TS4002):
Cannot receive mail in OS X Mail
If you use OS X Mail, look at the name of your iCloud account on the left side of the main Mail window. If your iCloud account name is dim and has a lightning bolt next to it, your account is offline. To resolve this, make sure your computer is connected to the Internet. Then choose Go Online from the Mailbox menu.
If taking your iCloud account online doesn't resolve the issue, follow these steps:
From the Mail menu, choose Preferences.
In the Preferences window, click the Accounts tab if it is not already selected.
In the Accounts list, select your iCloud email address.
Click the Account Information tab.
Verify your SMTP server settings with the following information:
Incoming Mail Server: imap.mail.me.com
User Name: Your iCloud email address
Password: Your iCloud password
Click the Advanced tab and verify the following additional settings:
Port: 993
Use Secure Sockets Layer (SSL): Should be enabled
Authentication: Password

Failed to Establish Connection With SQL Database Server in Essbase studio

I am using Essbase Studio Release 11.1.2.1.00 for developing XOLAP cubes and deploying them on to Essbase server .
I am getting the below Error while deploying the cube onto Essbase server.
error : Failed to deploy Essbase cube.
Caused by: Failed to build Essbase cube dimension: (TimeHierarchy) .
Caused by: Cannot get async process state. Essbase Error(1021001): Failed to Establish Connection With SQL Database Server.
From Essbase Studio -> Datasources tab, I could able to connect to SQL Database server..Please let me know how to resolve this issue.
Thanks,
Swathi

Thanks for the reply.
There was a problem with my Essbase Server..so now i m pointing to other server.
now I am getting the below Error:
Failed to deploy Essbase cube.
Caused by: Cannot end incremental build. Essbase Error(1025008): Join Specification near [[TIMEID]] is invalid. Please verify the Xolap Schema file.
Please let me know how can I validate my cube and what changes might require in my Cube definitions?

Failed to Establish Connection with SQL Database Server (EAS)

Hi,
We have recently installed version 11.1.2.1 of essbase. Everything is working just peachy. One of my users tried to build a load rule using an Oracle ODBC data connection and gets the error:
Failed to Establish Connection with SQL Database Server. See log for more information.
When I look in the log I see this:
[Tue Feb 28 09:14:43 2012]Local/Sample/Basic/mressler@EnCanaAD/4240/Info(1013091)
Received Command [SQLListDsn] from user [mressler@EnCanaAD]
[Tue Feb 28 09:14:43 2012]Local/Sample/Basic/mressler@EnCanaAD/4240/Info(1021020)
Cannot read SQL driver name for [Backup Exec Catalogs] from [ODBC.INI]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1013091)
Received Command [SQLRetrieve] from user [mressler@EnCanaAD]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021020)
Cannot read SQL driver name for [Backup Exec Catalogs] from [ODBC.INI]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021004)
Connection String is generated
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021041)
Connection String is [DSN=Test;UID=...;PWD=...;]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021006)
SELECT Statement [SELECT '1' from dual] is generated
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021013)
ODBC Layer Error: [IM004] ==> [[Microsoft][ODBC Driver Manager] Driver's SQLAllocHandle on SQL_HANDLE_ENV failed]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021014)
ODBC Layer Error: Native Error code [0]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Error(1021001)
Failed to Establish Connection With SQL Database Server. See log for more information
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Warning(1080014)
Transaction [ 0x140002( 0x4f4cfd87.0x7b890 ) ] aborted due to status [1021001].
I have tested that the ODBC connection can connect to the database. The sql query has been dumbed down to select '1' from dual. I have not included the word "select" in the query.
Anyone seen this before? We are in the process of uninstalling the Oracle client completely and re-installing it to see if this solves the issue. We only installed the 64 bit version of the Oracle client. I am running on Windows Enterprise 2008 R2 - 64 bit. EAS, Essbase, EIS are all 64 bit installs. I believe Studio is the only one that is 32bit. However we are not currently using this product.
Thanks,
Mike

Hi Mike,
With Oracle Support's help, we got 3 of the 5 servers working now. We were using the Datadirect drivers but were configuring them wrong! You have to use the Standard Connection portion in the setup, specifying the Host, Port Number (1521) and the SID. We were using the TNSNames Connection which worked in the past, but apparently does not now.
So I am down to 2 servers not working. They are both Windows 2008 R2 Enterprise 64 bit, running Oracle EPM Essbase 11.1.2.1. When I Open SQL in EAS it prompts for database (Essbase Server, App, DB) and when I hit ok it pops up with "Network error: Cannot Locate Connect Information For []". We did not do any of the suggestions in the document you linked to get the other 3 servers working. When you hit ok on that error, you then get another error stating, "There are no Data Sources defined. 'SQL data sources' option will be disabled". We do have datasources defined on the server.
Any ideas?
Thanks,
Mike
Edited by: Mike on Mar 1, 2012 8:38 AM

Error: 1021001 Failed to Establish Connection With SQL Database Server

Hello,
Someone you already MEETS it the following error during an essbase retrieve DLR.
My client oracle essbase on my server is 64bit, Essbase 11.1.2.2 x64
I run the odbc located in% windir% \ system32 \ odbcad32.exe
"Error: 1021001 Failed to ESTABLISH Connection With SQL Database Server. See log for more information"
Here is the log:
Received Command [SQLListDsn] from user [admin]
[2:50:33 p.m. Fri 28 September 2012] Local / CAS_TEST / / / 8168/Info (1042059)
Connected from [10.100.50.2]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1013091)
Received Command [SQLRetrieve] from user [admin]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021004)
Connection String is generated
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021041)
Connection String is [DSN = TEST_ORACLE; UID = ...; PWD = ...]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021006)
SELECT Statement [SELECT from dual;] is generated
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021013)
ODBC Layer Error: [IM004] ==> [[Microsoft] [ODBC Driver Manager] Driver's SQLAllocHandle we failed SQL_HANDLE_ENV]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021014)
ODBC Layer Error: Native Error code [0]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Error (1021001)
Failed to ESTABLISH Connection With SQL Database Server. See log for more information
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Warning (1080014)
Transaction [0x780001 (0x50659d19.0xc9e78)] aborted due to status [1021001].
When I try to go through OCI service name:
dbServerName: port / service_name
I have the following error message:
Solutions2: List of members 1423.CAS_TEST.CAS_TEST September 28, 2012 2:50:15 PM CEST Succeeded
Read SQL record September 28, 2012 2:50:35 PM CEST Failed
thank you in advance
Edited by: 851398 on 28 sept. 2012 06:31

In essbase logs there is nothing special, same for windows log.
Everything I like is log in log view eas
[Fri Sep 28 17:52:11 2012]Local/CAS_TEST///4020/Info(1013205)
Received Command [Get Database Info]
[Fri Sep 28 17:52:11 2012]Local/CAS_TEST///4020/Info(1013205)
Received Command [Get Database State]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7580/Info(1013210)
User [admin] set active on database [CAS_TEST]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///6720/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/6720/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7304/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7304/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7572/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7572/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///8116/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/8116/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7384/Info(1013210)
User [admin] set active on database [CAS_TEST]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///6592/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/6592/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7972/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7972/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///216/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/216/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3104/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3104/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3472/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3472/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///8112/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/8112/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///4020/Info(1013205)
Received Command [Get Database Info]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3840/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3840/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7760/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7760/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7300/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7300/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7904/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7904/Info(1013091)
Received Command [OtlQuerySmartLists] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3612/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3612/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///6732/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/6732/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7576/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7576/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7268/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7268/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:27 2012]Local/CAS_TEST///7556/Info(1013210)
User [admin] set active on database [CAS_TEST]
[Fri Sep 28 17:52:29 2012]Local/CAS_TEST///8168/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:29 2012]Local/CAS_TEST/CAS_TEST/admin/8168/Info(1013091)
Received Command [SQLListDsn] from user [admin]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST///7564/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1013091)
Received Command [SQLRetrieve] from user [admin]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021004)
Connection String is generated
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021041)
Connection String is [DSN=TEST_ORACLE;UID=...;PWD=...;]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021006)
SELECT Statement [SELECT * from dual ] is generated
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021013)
ODBC Layer Error: [IM004] ==> [[Microsoft][ODBC Driver Manager] Driver's SQLAllocHandle on SQL_HANDLE_ENV failed]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021014)
ODBC Layer Error: Native Error code [0]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Error(1021001)
Failed to Establish Connection With SQL Database Server. See log for more information
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Warning(1080014)
Transaction [ 0xb50001( 0x5065c7d7.0x31ce0 ) ] aborted due to status [1021001].
Have you an idea about the Merant driver to essbase?
Thank

Business Server exception: attempt to establish connection failed.

Similar Messages

Maybe you are looking for