Business system assignment

hi
i am new to xi i have a doubt that what is the relation ship between technical system and business and system and what is relation ship between them
i.e. how many technical system can be assigned to business system and vice-versa.

Hi srinivas,
You can have multiple business systems assigned to a technical system
1: many
The association between the TS and the BS is dependent on the TS type; for instance, in a system based on SAP Web AS (ABAP), each client in the system is a separate BS (this corresponds to the notion of a client as a Logical System in ALE configuration).
A very simple analogy could be this
The machine that you are working on might be a computer with a hostname on the network. This is the technical system. You might have installed various s/w from providers like Microsoft( Office etc) , Oracle (database).
The s/w correspond to the Business System.
Regards
Krishna
Note: Reward Points if useful. Thanks

Similar Messages

Error When Assigning a Business System in ID

Hi,
I'm using PI 7.1. and when I'm trying to assign Business System from our SLD (menu path Business System --> Assign Business System). it throws me the following error:
Access to object list of type "BusinessSystem" using the InternalEOAService BusinessSystemAccessor failed
What are the steps to debug this?
Thanks.
Prema Boodi

The problem is solved using below solution:
We should have USERS: PIDIRUSER & PIREPUSER
with Roles:
SAP_XI_ID_SERV_USER
SAP_XI_MONITOR_J2EE
And User Type must be service.
Also check the users are not locked.
And passwords for PIDIRUSER & PIREPUSER users should have same password in Local SLD & in Central SLD. (if you are maintaning more than one SLD)..

Assign business system

I have created a business system in SLD. When I want to assign this business system to the scenario, I can not find it in the wizard and also not show on Object tab. It is a new business system, I dont assign it to the other scenarios. How to find it?

Hi
You need to first import this business system from SLD into Integration Directory.
Go to objects tab -> right click on "Business System" -> Assign Business System.
In the new window choose your newly created business system and its ready to use now
If your Business system does not show in da new window, refresh the cache,
how to refresh the cache?
Goto ID -
> Environment -
> Clear SLD Cache, try the step of importing it again.
Hope this clears your doubts
Thanks
Saiyog

SLD, Business System and Missing Communication Channel

Interesting issue here....
I created a business system, assigned the logical system, ...etc..etc
Imported the swcomp into ID.........completed the scenario..
Now in Communication channel monitoring i dont see the communication channel that i created for the System, i can see it on XI under sxi_cache...........under the business system, I dont see it in communication channel monitoring.
Venkat

Hi,
>>...i dont see it..thats what i meant...no messages for that adaptor,
Clear the Meta Data IDX1 and check the port as Ravi Mentioned IDX2.
After clearing the Meta data try to manually load the Meta data and test it.
Regards
Agasthuri Doss

Error while assigning Business Systems in Integration Directory

Hi,
I'm getting an error when trying to assign the business systems in the integration directory.
The error i'm getting exactly is "access to object list of type BusinessSystem using the internalEOAService BusinesSystemAccessor failed " .
I've cleared the SLD_cache and checked it but the same error.
The business systems are appearing when i tried the transaction code SLD_CHECK and is in green status.
what might be the error.

Hey
just want to make sure,are u using communication channel with party or without party.
also make sure that user has sufficient authorizations
http://help.sap.com/saphelp_nw04/helpdata/en/c4/51104159ecef23e10000000a155106/content.htm
Thanx
Ahmad
Message was edited by:
Ahmad

Problem in Assigning the Business System

Hi,
I have problem in Assigning the Business System at Configuration when I am trying to configure the Communication Channel. I had created two Software Components and also Two Technical Systems (Third Party) and Business System and I imported the SWC into repository and done with the design and now I am not able to Configure, can anyone help me out as this is very urgent.
Thanks in advance
Andy

Hi Andy,
Check if you have created you business system according to the steps given here, maybe you missed out on something.
Configuring a Business System
http://help.sap.com/saphelp_nw04/helpdata/en/ae/e3bd4f6b61e146ad1384954ecabb41/content.htm
Defining a Business System as a Service
http://help.sap.com/saphelp_nw04/helpdata/en/3e/60653f0c9fa075e10000000a114084/content.htm
Regards,
Chandra

The business system HRK_005 is not a business system in the group assigned

Hi there,
i have a Problem. I want to transport a Scenario from our Consolidation to our Prod System.
In this Szenario, there are XI and HR Systems included.
On Consolidation Side:
XIK_001
HRK_005
in Prod
XIP_001
HRP_001
When i now export the whole Scenario from our K System and want to import it to our P Systems the following error occurs:
The business system HRK_005 is not a business system in the group assigned to production.
I have no System HRK_005 in production. HRK_005 is in Group Consolidation?!?
Can someone help here?
Thanks
Bjoern

Oops i spoke with u r key code it bounced back .
Well i explained standard way to export and import Intergration Directory objects.
K - Development System ( SLD_Dev)
P - Production System (SLD _Prod)
In K - SLD_Dev needs Group -- This is based on the Integration Server (IS) of the K / P XI server.
IS (K) -- Group1 / IS (P) -- Group2 (All this in the SLD_Dev)
Assign all BS of K to Group1
Assign all BS of P tp Group2
For BS of K specify the target transport as Production BS (P).
Now goto P (SLD_Prod) create the BS as same in K what you have created in Group2
Now export from K (Dev) to P(prod)
am not able to view the link provided.
Any ways i have listed standard way for transport, hope this helps
Srini

Problem in assign business systems in IB configuration

Hi ,
I have defined Technical systems,business systems properly in SLD and i also able to import my software components in Integragion Repository. i have defined all the data type , msgs types ,msg interface,msg mappings properly in IR.
But my problem is when iam trying to assign business systems in IB configuration scenario.
Business system list is not appearing in IB configuration.
Thanks
Hari

Hi,
Check the following..
1) Check Whether that BS is already is Assigned to Another Scenario
2) If it is Assigned to another scenario means, goto Objects TAB -
Expand Service With out Party
Business sysemRight click---Add to scenario( Select ur scenario)
3) Do SLD Cache through Envoronment----SLD Cache
once you do this..
1) Expand Your Config Scenario--Service Without Party-Business SystemRight clickAssign
2) Say Continue-Say Continue Select ur BS
3) Un check the Check Box Bottom of the Window
go throgh these blogs too..
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
/people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
Thanks,
Vijaya.

Assign Business System in Integration Directory

Hi all,
i have basic question.
in my ID, there are some configuration scenarios.
for example, the left side look like,
in case,one of Business System created on SLD was assigned to one of configuration scenarios,
i would need to assign same business system into Business System in Service Without Party in another configuration scenarios, it was not possible to assign.
can i assign BS1 to several configuration scenarios?
or should i create Main scenario in order to define communication channel?
thanks in advance
venjamin

Hi venjamin
Yes, you can assign the same business system to different configuration scenarios.
to do this there are 2 ways.
1. Open the cofiguration scenario to which the business system has already been assigned.
Right Click on the Business System> Add to Scenario> Select the scenario to which you want to
assign your business system.
2. Select the objects tab>service without party> business system> your business system> right click-->
assign to scenario and then select your scenario.
Hope this helps,
Regards,
bhavesh
Message was edited by: Bhavesh Kantilal

Business system * is not assigned to a business system group

I am running XI3.0 (SP12), Oracle 9.2.0.6 on a Windows 2003 Cluster Server.
I am trying to import some config from the Integration Directory from Dev into QA but I am getting the following error:
<b>IMPORT XI 3.0 Design Objects
Business system XIT is not assigned to a business system group with the ID (XISystemGroup)</b>
I have copied my Dev SLD into my QA SLD.
Has anyone else come across the error??

Barry,
You should ideally have assigned Business systems in ur QA landscape to 1 group & Business systems in your dev landscape to another group. Also , hope you have created transport targets for all ur Business systems in dev environment.In ur QA SLD , you should have two entries for each business system , something like
DEV-BS-1 -> transport target -> QA-BS-1
QA-BS-1 -> transport source -> DEV-BS-1
Thanks
Saravana

System not assigned to any business system group

In transaction /SAPAPO/MAT1 an error occurs when I try to create a new product.
Error message: " System SC1CLNT100 not assigned to any business system group".
When I received this error I created business system group in SLD and assigned my system to this new business system group.
Then I went to transaction RZ70 and executed Data Collector without Job scheduling.
But when start transaction /SAPAPO/MAT1 again the error /SAPAPO/MAT030 still occurs.
What should be done to make changes, which I made in SLD visible for the system?
Thank you in advance,
Kind regards,
Maria Kazakova

I assume you assigned this BSG in the IMG in APO
"As an independent logical system, the APO System must, in addition to the SAP R/3 Systems, be assigned to a business system group (BSG)."

Source System Assignment while Installing Business Content

Hi,
I have a new R/3 source system in BW (one R/3 system already exists). When I'm installing business content for say an Infosource and before, even with a succesful install , the new source system assignment is not taking place in the infosource and neither are the packages (for the new source system) being installed. The datasource (for the new source system) remains unassigned.
Please Advice
Thanks

Hi Shurobhi
with your new R/3 source system are you able to see the datasources - using right clik on source system & then select datasources overview. IF not then you need to check if the source system connection is done with metadata repository replication or not. If that is also done then ensure that you have installed all business content datasources using RSA5 in your R/3 system.
On BW side, while installing transfer rules and infopackages, make sure that this new R/3 source system is checked on in source system Box - X icon on business content screen. Then only you would be able to see transfer rules and infopackages & install them.
Hope this helps
Regards
Pradip

Problem Assigning Business Systems

Hi,
Landscape: New XI 3.0 SR1 Installation, W2K, oracle.
SLD: on a separate server with ABAP+J2ee. ABAP datastore for UME. Updated with new CIM, CR content.
Followed oss note: 768148 - Using a separate SLD for XI
We completed all the settings as per post-installation guide and XI configuration guide. We were able to connect & create the technical and business systems for XI and R.3 ECC 5.0 in the SLD.
SLDCHECK in XI server is fine, and shows the correct information about the SLD.
But when I am trying to assign a business system in Integration Directory - Service without third party, in the following wizard I am getting an error message
"Access to object list of type "BusinessSystem" using the InternalEOAService BusinessSystemAccessor failed"
Any help would be appreciated

Hi Rao,
The following links u may find it useful.
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
http://www.sap-press.com/downloads/h982_sample_chapter.pdf
*Please Reward points if u find it useful.
regards,
gyanaraj

Can One Business system have two technical systems assigned to it

Can One Business system have two technical systems assigned to it

hi,
the technical system describes the physical view and the business system the logical view, respectively.
So in most cases you must define both but while a technical system can only link to one WEB AS, more than one business systems can link to the same technical system.
But one Business System can have only one technical system.
Logical system for senders and receivers in XI can be defined as business systems which is associated with technical systems. You may req to create BS for identifying individual senders and recievers. Technical system is gateway having the technical details and it is in the ID we designate it to be either a sender or a receiver.
Follow the link below to learn moer on it:
http://help.sap.com/saphelp_nw04/helpdata/en/97/9d84494b9f45caabe0713296d89b72/content.htm
Regards
Mamta
Edited by: Mamta Yadav on Sep 12, 2008 11:13 AM

Automatic comm channel when assigning Business system during configuration

Hi all,
In scenario file to file during Configuration,
During assigning business system there is a check box:
<b> 'Create communication channels automatically' </b>
I am planning to use File adapter on both receiver and sender side..
The question is Do I check this box or not ? If I do check this box it creates for me HTTP adapter ...Do I need it or not? I am clearly only using file adapter
thanks all !
Jon

U cannot use it in ur scenario. This function is supported for the following adapter types:
- XI Adapter
- HTTP Adapter
- IDoc Adapter
- RFC Adapter
See this
http://help.sap.com/saphelp_nw04/helpdata/en/42/d1a4d665c5574fa6e19784358ec948/content.htm
Regards,
Prateek

Business system assignment

Similar Messages

Maybe you are looking for