Business system connection to XI

Hi,
I would like to connect business system R/3 4.7 (web as 620) to An XI system - PI (process integration netweaver 2004s) - do i need to install on the businees system the appint add-on?
according to note 721160 the add-on must be installed but this note is talking about XI 3.0 and my system is based on netweaver 2004s (process integration - formely XI)
Moshe

Hi,
>>Do i need the appint add-on on the R/3 620 system for proxy?
If your SAP R/3's WAS< 6.20 means you have to do this activity.
If ur SAP R/3's WAS is >=6.20 means not necessary.
Check this for refference
How do you activate ABAP Proxies?
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Regards
Seshagiri
Edited by: N V Seshagiri on Mar 20, 2008 10:57 AM

Similar Messages

Connect one Business system with two Integration Server

Hello,
Can we able to connect one Business System with two Integration Server?
I have one Business system (ECC 6.0 with the client 900) and it is already connected with PI 7.0 system.Can I able to connect the same sytem (with same client) with PI7.1?
I want to do the HTTP Connection for ABAP Proxy for this two XI system with one business Sytem ?
Is this possible ?Is there any work around solution there?
Thanks.

Hello ,
This document describes about connecting with Two PI7.1 system using Application Server 7.1 and Application Server 7.0 SP14 .
I want to connect same ECC system via abap proxy with two different PI system .One is PI7.0 and another one is PI7.1 system.
Is this possible if i use Application Server 7.1 or Application Server 7.0 SP14 ?
Thanks.
Lakshmi
Edited by: Muthulakshmi Pandi on Apr 16, 2009 11:48 PM
Edited by: Muthulakshmi Pandi on Apr 17, 2009 12:21 AM

General XI Connectivity activities in the business system to connect to XI

Hi,
Is there any general/common XI connectivity activities/configuration to be done for a business systems (both SAP and Non-SAP) to preparfe it to able to talk to SAP XI ? Is there any mandatory tasks (sort of a checklist) to make a business system to be able to integrate it with SAP XI (apart from specific configuration).
The SAP XI Master guide talks about XI Connectivity add-on client to be installed in the business system. I am not understanding as to what does that mean. For Example, if i want to integrate SAP SRM business system to SAP XI, what are the minimum XI connectivity related activites to be done on the SAP SRM system.
I appreciate your input in this regard.
Regards
Ganesh

Hello Nisar
Thanks for the update,
Let me say few points about this particular problem:
1>The interface "XX" from XI sends data to two systems( R3 -->RP1 & RY1), some thing like branched (same data is passed to both the reciever systems).
And the second RY1 is copy of First system RP1 (Production sys) which is used for data loading purpose and every week there will be a refresh from First sys (RP1) to Second(RY1).
2>Now the first sys(RP1) is recieving the data successfully from XI , and the second one (RY1) is getting failed .And this started after changing the Business system 871 to 100 .
3>As mentioned by you , I have checked all the points mentioned
    i)In SM59 for XI (ABAP part) two rfc's are maintained (LCRSAPRFC & SAPSLDAPI) and the test connection is also fine...But I did not find these two connections in reciever systems(RP1 & RY1 too).
   ii)In reciever system RY1 ,when i went to RZ70 , i did not noticed any special settings and SLD Bridge :Gateway Information is not maitained over there .and the same thing in other reciever system(RP1) , with this can we confirm that there is nothing wrong in RZ70 settings.
   iii)In SLDAPICUST at recievers end for both systems nothing is mantained , where as in XI system all the details are maintained(Host name,port, user & password).
I have translated the error log into english from the CC monitoring for this interface which is in portuguese language .
It says that:
RFC_ERROR_LOGON_FAILURE: 871 Mandante not in the system (select principal existing)
Kindly advise me what to do ..for fixing this problem(this is pretty urgent and it is production env...)..
If any information required , I can provide that.
Best Regards
Rakesh Reddy

SLD Connection IB: Can't find business systems: InternalEOAService

Dear experts,
I have connected my SLD properly to the IS. SLD_CHECK is successful. But I can not access the business systems from the integration builder. I get this message:
========================================================
Access to object list of type "BusinessSystem" using the InternalEOAService BusinessSystemAccessor failed
========================================================
What's wrong. Performed J2EE restart and SXI_CHACHE refresh.
Can also not import configuration objects due to the fact that it thinks that certain business systems do not appear in the SLD. But they do....
Please suggest?!?
Kind regards.

Forget about the SLDCHECK. that is completely irrelevant here and only deals with the abap communciation.
Your issue relates to the JAVA communication with the SLD.
You need to successfully register the JAVA stack with the SLD. In the Data Supplier, does this work for every page? You are interested in the CIM Data tab...
You may have to make alot of manual associations, but until you can register the other components, there's no point.
Can you specify your version and whether or not the Template Installer was successful and whether you have checked the post installation tasks?
Also check this note: https://service.sap.com/sap/support/notes/939592

IPIVR connection to business systems

Is it possible for a IPIVR to use SSL when conencting to a business system gateway for processing credit cards ? Let me add to this, usng the java method.

Hi,
the short version: yes, that's possible, but...
The longer version: yes, that's possible, but you'll have to do some Java programming around it.
If I were you, I would build a Java package that would use Apache HTTPClient for connecting to the business system. Take a look at this: http://hc.apache.org/httpclient-3.x/sslguide.html
G.

** SPROXY is not working properly in Business System

Friend
My SAP Business System is having Ver 7.00. This system is already connected with our XI server. I face 2 problem when execute SPROXY tcode in this system.
1) System asks username & password for every click.
2) Whatever I have created SWCVs in IR, only SWCV names are displayed there are no objects under that.
I troubleshooted the following things.
I have run the following reports.
1) SPROX_CHECK_HTTP_COMMUNICATION - HTTP Communication is working fine.
2)SPROX_CHECK_IFR_RESPONSE - We get the response.
3)SPROX_CHECK_IFR_CONNECTION - Integration Builder connection is working properly and Data understood.
When I run the 4th report, SPROX_CHECK_IFR_ADDRESS, the data in the SPROXSET table is not shown.
Actually when I checked the data in the SPROXSET table, there is no data in that table.
Friends, how do enter data in SPROXSET table ? How to bring all the objects in SPROX under SWCVs.
Could you kindly help me to solve the above 2 issues ?
Thanks in advance.
Kind Regards,
Jegathees P.

Actually
when you run the SPROXY it does 2 things
1. can take the rep information from the table
2. can take the rep info from the exchange profile in the SLD
if you want the sproxy to take the data from the exchange profile do the following:
RFC Dest: should work fine.
LCRSAPAPI
SAPSLDAPI
SLDAPICUST should work fine?
Also in RZ70 TC you should point to the SLD.
This 2 RFC are Registered Programs, if this RFC is working then your Application system can ping to the SLD where the exchange Profile is present.
Message was edited by:
n Khan

Error while reading ID of own business system from the SLD for system D18

Dear guru's,
I have almost completed a file2proxy scenario but I'm stuk on the following.
When sending a message the outbound adapter says:
<b>Error while reading ID of own business system from the SLD for system D18 and client 200</b>
What's the problem? I'm using a HTTP connection in the comm. channel. In this http connection a user with SAP_ALL is defined.
Any suggestions?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>D18</SAP:P1>
<SAP:P2>200</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading ID of own business system from the SLD for system D18 and client 200</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Login to system D18 and client 200 and check the TC SLDCHECK and also as per my pervious message check the entries in the SLDAPICUST, it should point to the Server on which SLD is present usually XI server https.
Actually what happens in this error is when you are done with the configuration part in the ID, you are trying to eceute the scenario File to proxy, when it comes to identify the receiver system which is D18 clnt 200, it goes to SLD to check it and SLD is trying to ping to the machine D18 this connection is set from the TC SLDAPICUST on the machine D18.
here the problem is that either the D18 is not able to ping to the SLD and also try refreshing the SLD cache.
Hope you problem is fixed

Business system and logical system names

hello experts,
Right now m creating scenarios of IDOCs, Files and RFCs. Just wanted to know that is it compulsory to give Business system name and Logical system names same?
Does it make difference if i will give both names different?
Regards,
H.S.

Hi,
I guess i have not explained you proprely.
Here logical system mean m asking abt the system name which we are using in RFC connections to make connection between two systems.
does Business system name and Logical system name should be same?
Actually right now we have done system copy of production system into our sandbox. So all the things are pointing to the production system.
I was just wondering, if i will just change ip/ hostname into the Technical system (ip of sandbox system) and keep business system name as it is( which is right now of production system)... then for me no need to create all ID Objects again. Its just an idea. So just wanted to check is it ok... bcz in ID i have more than 60 objects which i need to create again. and i have very less time
Or if anyone can tell me any good idea to do that.
Thankx in advance.
Regards,
H.S.

How to determine the sender business system for ABAP client proxy

Hi All,
I have one doubt: when the client proxy sends the message to XI, how could i know what is the sender business system name for it?
Is it the logical system which is reflected in Technical System?
let's say if i have the ABAP system, the technical system is ECC, which has three clients: 001, 066 and 000.
And the client 001's logical system in ECCCLNT001 (all the client proxy is created in this client). In this case, the sender business system name is ECCCLNT001, am i right?
If no, please correct me.
Thanks in advance
Leo

Hi lawrence
When data is distributed between different systems, each system within a network has to be clearly identifiable. The u201Clogical systemu201D deals with this issue.
A logical system is an application system in which the applications work together on a common data basis. In SAP terms, the logical system is a client.
Since the logical system name is used to identify a system uniquely within the network, two systems cannot have the same name if they are connected to each other as BW systems or as source systems, or if there are plans to connect them in any way.
Although SAP does not recommend that you connect test systems to production systems, a test system can have the same name as a production system. This makes copying production systems to test systems a lot simpler.
You are only allowed to change the logical system name of a system if the system is not connected to any other systems, because changing the logical system name would render all the connections to other systems useless.
Logical system names must contain capital letters and numbers only. SAP recommends the following naming convention for logical system names: <System-ID>CLNT<Client>.
Regards
sandeep

Business service or Business system??

Hello All,
I do get confused with respect to Business service and Business system?? What differentiates between them and when accordingly are they used??
If I am using a HTTP adapter to connect to a URL address of a 3rd party system, what would be my steps in Intergration directory involve?? I get lost in receiver determinations and interface determinations and their purpose...
Thanks,
Kenneth

Hi Ken,
Basically business service will be used only for published services and not those which have a physical landscape set up. If there is a physical landscape available then we go for business systems.
Receiver determinations talk abt the receivers available for an outbound interface and interface determination tell you abt the interfaces ( both outbound and inbound) in play and their mapping pgm involved.
Hope this was helpful and any add ons are also welcomed.
- Teresa

Business Service -- Business System

Hi all,
I've read several tutorials about scenarios in XI and have seen that sometimes business services are used and in some cases they use business systems to implement a communication partner. When do I use business services and when do I use business systems?
Thanks in advance and regards,
Marc

Hi Marc,
You use a Business Service, when you do not have the System details of the the partner system to which you want to communicate. i.e. you have not configured the partner system in SLD.
Business System is always configured in SLD and you use it when you have all the data you need to connect to the partner system
Michal: correct me if I am wrong.
Regards,
Padmaja

Role of business system in SLD

I am doing PI post configuration with Central SLD on solution manager.What should be the Role of the business system for solution manager?In sxmb_adm should I give this as application system? And what should be the corresponding integration server?

Hi,
it should be application and should be connected to PI as any other R3 application system. If you connect it ti PI, then enter the PI destination as explained in the PI configuration guide, section connection to other business systems.
If you are not using PI, then it is not relevant - you should leave both fields empty
regards,
jaime

How To Create A Technical And Business Systems For Web AS ABAP ???

Hi Experts,
How To Create A Technical And Business Systems For Web AS ABAP ???
Please Let me Know All the Step-By-Step Process to Create ????
Points Will be Given
Regards
Khanna

Hi Sumit,
When U Told the thing that first time to execute the RZ70 and All i Did this in XI System
So I got An Entry for the Technical System for XI System.
Now i Deleted that and Executed RZ70 in R/3.
When I Executed RZ70, I got this Error.
<b> "RFC Call failed: Error Opening an RFC Connection "</b>.
Now I am Unable to see Any Technical System Under Web As ABAP. It's Showing Empty Now.
Please Let me know
Regards
Khanna

Business systems group setting in location master

Hello experts,
I am currently in the process of trying to set up the integration models for a second R3 system to be connected to one APO system. All of the locations / plants for the first R3 system were created under BSG1. The locations / plants for the second R3 system were created under BSG2.
I have identical product in both R3 systems. They have the same material numbers. The materials have existed in APO for quite some time under BSG1. When I try to send the material numbers from the second R3 system, I get an error that the materials already exist in a different business systems group. I changed the config for the second R3 system to be BSG1 (same as first r3 system). But now I cannot create an integration model for my plants, because they already exist under BSG2.
If I change my locations / plants to BSG1 would that correct my initial error message? Is there a way to change the business system group of a location once a location already exists in APO?
FYIu2026 I tried using /SAPAPO/DELETE_LOCATIONS to delete the locations and resend them, but /SAPAPO/DELETE_LOCATIONS doesnu2019t seem to do anything. After I run the program, I still have all of the locations in APO, whether the location was flagged for deletion or not.
Thanks,
Matthew Bruckner

Hi Matthew Bruckner
do you set deletion flag to your location master ? If not, please set deletion flag at first, then please delete your location by using /SAPAPO/DELETE_LOCATIONS .
To set deletion flag to your location, please perform following.
1. Open transaction /n/sapapo/loc3
2. From the menu, select "deletion flag".
(the location should be de-assigned from related data like product, model)
3. delete your location by using /SAPAPO/DELETE_LOCATIONS .
And if you have same location or same location product, I recommend you to add some kind of information to your location and product by using CIF user exit.
Please take a look at my comment in following thread.
Re: Integration multiple R/3 systems with APO via CIF
best regards
Keiji Mishima

Business systems are not reflecting in Int. Directory

Hi All,
I am getting a problem regarding business systems. Any business system which i have in SLD is not showing up in the ID when I am doing the configuration.
Somebody suggested SLDCHECK...
When I run this transaction I get the message that "Connection with SLD does not work". Is it related ?
Many Thanks,
Mona.

Hi,
The Integration server is not connected to the SLD.
Please check if you have done the following
1. Updated transaction SLDAPICUST with SLD server details information
2. Create TCP/IP connection in LCRSAPRFC and SAPSLDAPI in the trnsaction SM59
3. Create the same in the visual admin.
All the details are given in the SAP XI configuration Guide.
Regards
Vijaya

Business system connection to XI

Similar Messages

Maybe you are looking for