Business system deleted

Hi,
By mistake one my consultant has deleted the business system in SLD.Now i am trying to recreate it is not allowing me to create.
Regards,
Viren.

hi,
in System landscap directory under Business system we have created one entry for our XI server which is not there... i suppose somebody has deleted it by mistake..
Now i am trying to create a Business system for SAP XI.When i am trying to save it shows me the message that integration server is already defined.. There is already an integration server defined for the selected technical system.
I want to create business system for SAP XI.
Regards,
Viren.

Similar Messages

I am not getting Business System into my Integration Directory.

Hi All!
This is satish, I created Business system in SLD. How to get them in Integration Directory.Please help me.
Thanks in advance!

Hi Satish,
Go to Service without Party->Right Click->Assign Business System->it will show you list of Business Systems created in SLD -> then go ahead
Then
2 options to refresh the cache-
Integration Directory->Environment->Clear SLD Data Cache
Another way is -go to SXI_CACHE / Goto - Business System -> delete the content
Still , if you are not able to see the Business sytem in the Directory, the just go and check in the SLD. If it exists just change and save it.
Then synchronise the same by SLD cache refresh as mentiond.
changing BS
Also refer for more-
Problem in Assigning the Business System
Hope this helps,
Regards,
Moorthy

Business system not found in CPACache

Sceinario was working fine before XI system crash. After the system is reestablished the scenario not working. Giving RFC error "Service: SAPESRI not found in CPACache" in R3 system
CPAcache refreshed for dela as well as full
Adapter specific identifiers are fine
SLD cache cleared in IR ID
Business System name is found in CPAcache
error repeated
Business System deleted from SLD. New business system Created. Entire scenario reconstructed. All the above are also fine.
Still error is repeating.
Can anybody give a solution for this problem please?
Regards,
Venkat

Hi Venkat,
The subject of the problem & the problem explanation is varing i.e *Business system not found in CPACache*
However, the problem still lieing with SLD. So, test the SLD and activate the scenario. Also without refreshing CPA cache you will have to perform execution.
Regards
Pothana

Error while deleting the business system in SLD

HI
I am trying to delete the business system in SLD and encountering the following error .
if some one has any idea as to why is this error occuring
java.lang.NullPointerException at com.sap.sld.wd.businesssystem.BusinessSystem.removeXIIntegrationServer(BusinessSystem.java:497) at com.sap.sld.wd.businesssystem.wdp.InternalBusinessSystem.removeXIIntegrationServer(InternalBusinessSystem.java:474) at com.sap.sld.wd.businesssystem.BusinessSystemMainView.RemoveOk(BusinessSystemMainView.java:450) at com.sap.sld.wd.businesssystem.wdp.InternalBusinessSystemMainView.wdInvokeEventHandler(InternalBusinessSystemMainView.java:477) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.clientserver.event.CustomEventProcessor.handleServerEvent(CustomEventProcessor.java:45) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleServiceEvent(WindowPhaseModel.java:361) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:128) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:330) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processPhaseLoop(WebDynproWindow.java:341) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:152) at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:297) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:706) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:660) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:228) at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:56) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:47) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Thanks
Nikhil

hi Nikhil,
Null pointer errors are difficult to correct as is
If you have imported the BS from some other system make sure the BS has been imported correctly without errors & any Tech systems attached to it exist.
sachin.

Hi business system in sld deleted

hi
one of the business systems(regarding SXI technical system web as abap) is deleted getting as error as integration server already defined when trying to
recreate

hi,
delete both of them
remember to recreate as shown in my blog:
/people/michal.krawczyk2/blog/2005/03/10/registering-a-new-technical-system-in-sld--abap-based
Rz70 will save your time
Regards,
michal

SLD: recreate deleted Business System of type Integration Server

Hi,
accidentally i deletet the business system of type "Integration Server" in the SLD. And i can't recreate it. It always says:
"Integration Server already defined There is already an integration server defined for the selected technical system. Please select role Application System."
Any ideas to create such a business system?
The old one isn't there in the list, after i deleted it.
regards,
ms

Hi,
If you change/delete the host name of the Integration Server after the installation in either the SLD or the exchange profile, you must adjust it accordingly in the exchange profile or the SLD, respectively
Maintaining a Business System for the Integration Server
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
Regarding Integration server in Business System
Regarding Integration server in Business System
Refer editing the Business System
http://help.sap.com/saphelp_nw04/helpdata/en/59/2cb3a3c93a4c7086500b8345143418/frameset.htm
Thanks
Swarup
Edited by: Swarup Sawant on Jul 7, 2008 2:03 PM

Deleting a Business System and related/assigned objects

I am PI newbie (as will soon become apparent) so first I apologise for my “simple” question.
In PI one business system has been replaced with another e.g. BS_US_1CLNT is replaced by BS_US_2CLNT. I want to delete the first business system and all its related components and links without breaking anything, preferably.
What is the best way to do this? I assume I go to the interface builder, select Object View, then select BS_US_1CLNT and open the object list. The object list consists only of communication channels so I can right click on each CC and delete? But what if these have been assigned already to Configuration Scenarios? Are there other objects/assignments I should take care of or check? Is this the right way to go about this i.e. simply right click on each CC under the BS_US_1CLNT tree and then delete?
Please help me with the steps I should take to proceed with this, and any objects etc. I should take care of.
All help greatly appreciated.
Wish you all a nice day further.

Hi Glen,
It is not easy just to delete all the objects pointing to a certain business system, but the way to delete would be communication channels first and then the business system would be last.
When deleting a communication channel, you can see where it is used by right-clicking on it and then select the Where-Used List option. It will list the objects that uses that communication channel, namely receiver agreement (for receiver) and sender agreement (for sender).
Once you have re-created the receiver/sender agreements to use the new business system, it should now be safe to delete the channels and the sender/receiver agreements. You should also do the same with the business system, right-click it and select Where-Used List. You also need to re-create the objects that uses that business system e.g receiver det, interface det, receiver agreement (if not yet deleted), sender agreement.
Do not worry about being a newbie, everyone of us started as one
Hope this helps,
Mark

CIM_ERR_ALREADY_EXISTS: Error while creating Business System

Hi,
I am getting following error while creating Business System in SLD, the Technical System is already created from RZ70 transaction in the IDES system
Error Creating business system: CIM_ERR_ALREADY_EXISTS: Instance already exists://inbbssun01/sld/active:SAP_LogicalALESystem.CreattionClassName="SAP_LogicalALESystem", Name = "LSIDES800.SystemName.800.SystemName.IDS.SystemNumber.0020224902.SystemHome.idesecc"
Thanks,
RP

Hi,
This error means that a business system with this name(or associated with this technical system) is already there in SLD.
You need to check that before you try creating it (might be someone else have created it before)
Updated
If you have created and deleted a business system and then trying to recreate one then you need to delete all the instance of it from Content Management (in SLD)
Regards
Suraj
Edited by: S.R.Suraj on Nov 9, 2009 12:34 AM

Error while reading ID of own business system from the SLD for system

Dear all,
We running on a SAP PI 7.1 enhancement pack 1.I know that there some threads about this subject, but unfortunately all suggestions found so far didn't solve my problem:
- SLDCHECK reports no errors
- SLAPICUST: pointing to the SLD
- SXI_CACHE with full refresh: no result.
Does anyone have a clue for me?
Kind regards,
John.

I hope you are facing this prolem with one particular Business System.. Since you have checked all the points and still facing this issue then try below options..
1. First try to clear full SLD cache and then test.
2. If cache doesn't solve the issue then delete the Business System from SLD and Integration Directory first then re-create the BS in SLD and "Clear SLD Data Cache" from "Environment" menu in Integration Directory and then import the Business System and test your scenario.

Cannot Remove Business System

Hi,
I had created a Business System (BS_ABC_200) for different technical landscape for which we had assigned Client number 200 and logical client name also. After that the Business System was deleted by accident. Then i even deleted the technical system and created the technical system and also new Business System with different name.
Now, when i assign the new Business System in Configuration time, the Business System cannot be activated. The Error is "SAP System Id and Client name already existing with the service BS_ABC_200". Even though i had deleted in SLD.
If i create the Business system with same name "BS_ABC_200" then while assigning in configuration time i wont be able to see that Business System in the list.
How to overcome this issue, how can i delete BS_ABC_200 completely. Is there any runtime cache where i need to delete it.
Thanks,
Ramesh P

Hi,
In general , that to be you are facing this type of problem only inthis situation , then you have to refresh SLD cache.
See the below link
/people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off - SXI_CACHE
XI Runtime cache error: Cache contents are obsolete
Cache Refresh - SAI_CACHE_REFRESH
/people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
Regards
Chilla

SLD: Adjust / Add logical system name for Business System [XI 3.0]

Hi,
In the System Landscape Directory, is it possible to adjust the logical system name of an already created business system?
I found in the content maintenance in Subset="All Classes", Class=SAP_BCClient" --> <MY_BUSINESSSYSTEM_ENTRY> the only possibility to add information on the logical system name of a business system.
Unfortunately, the information provided in the BCClient Entry is not forwarded to the Business System Entry for my Business System in the Business Landscape View of the SLD...
Is there another possibility to add the logical system name to an exisiting business system?
Regards
Kristian

In a third party business system, it is not possible to add a logical system, but you can delete the business system and recreate it with the same name without problems.
After assigning a new logical system to a business system, you have to go to the integration directory and reload the logical system for the business system. Therefore open the Business System in change mode and maintain the Logical System with menu service -> Adapterspecific Identifiers.
Regards
Stefan

Business service is not working in sender side but business system is working soap to idoc but why like that

i have scenario SOAP to IDOC
when i'm using business service in sender side it is getting an error as follows
sender message can not convert to ALE Logical system
in this i'm using altova spy as testing tool
my sender interface is asynchronous
but when i'm using business system everything is working fine
In sender side i'm using soap adapter,i checked the logical system everything is fine
mainly the problem is why it is working when i'm using business system rather than business service
my pi version is pi 7.0
thanks in advance
regards
satish

Hi Satish,
You are sending IDOC's to SAP system right. we should create Business system not business service.
so we should create the business system as web AS ABAP in SLD and import the same in ID.
When we create the business system in SLD the logical system name is assigned for the business system. like SAPCLNT100...It plays a key role in IDOC scenarios.
sender message can not convert to ALE Logical system
Reasons for this issue is
1) logical system name is unable to read from SLD for that corresponding business system.
Goto business system click on Adapter specific identifiers from the menu --> read from SLD.
it will automatically fetch the logical system name from the SLD.
2) Sometimes the logical system name will be deleted from the business system in SLD.
Delete the business system and re-create it, and follow the above procedure.it will resolve your issue.
Regards
Bhargava Krishna

Can not insert Receiver and Sender objects in Business System of ID?

Dear All,
I am facing a strange situation that in existing Business System of the Integration Directory, both the Insert Line Below Selection and Delete Selected Lines bottons are not there for both Inbound Interfaces and Outbound Interfaces. But for the business service, everything is ok. Is this some access role issue? Any comments or suggestions will be appreciated!
Thanks and Regards,
Nick

Hi Nick,
This is correct only. And it is not an access issue.
The inbound / outbound interfaces gets populated based on the SWCVs installed on this particular business system in the SLD.
i.e., when you define the business system, if you added "installed products" the interfaces in the SWCVs gets added automatically...
Thanks,
Renjith

How To Create A Technical And Business Systems For Web AS ABAP ???

Hi Experts,
How To Create A Technical And Business Systems For Web AS ABAP ???
Please Let me Know All the Step-By-Step Process to Create ????
Points Will be Given
Regards
Khanna

Hi Sumit,
When U Told the thing that first time to execute the RZ70 and All i Did this in XI System
So I got An Entry for the Technical System for XI System.
Now i Deleted that and Executed RZ70 in R/3.
When I Executed RZ70, I got this Error.
 "RFC Call failed: Error Opening an RFC Connection ".
Now I am Unable to see Any Technical System Under Web As ABAP. It's Showing Empty Now.
Please Let me know
Regards
Khanna

Business systems group setting in location master

Hello experts,
I am currently in the process of trying to set up the integration models for a second R3 system to be connected to one APO system. All of the locations / plants for the first R3 system were created under BSG1. The locations / plants for the second R3 system were created under BSG2.
I have identical product in both R3 systems. They have the same material numbers. The materials have existed in APO for quite some time under BSG1. When I try to send the material numbers from the second R3 system, I get an error that the materials already exist in a different business systems group. I changed the config for the second R3 system to be BSG1 (same as first r3 system). But now I cannot create an integration model for my plants, because they already exist under BSG2.
If I change my locations / plants to BSG1 would that correct my initial error message? Is there a way to change the business system group of a location once a location already exists in APO?
FYIu2026 I tried using /SAPAPO/DELETE_LOCATIONS to delete the locations and resend them, but /SAPAPO/DELETE_LOCATIONS doesnu2019t seem to do anything. After I run the program, I still have all of the locations in APO, whether the location was flagged for deletion or not.
Thanks,
Matthew Bruckner

Hi Matthew Bruckner
do you set deletion flag to your location master ? If not, please set deletion flag at first, then please delete your location by using /SAPAPO/DELETE_LOCATIONS .
To set deletion flag to your location, please perform following.
1. Open transaction /n/sapapo/loc3
2. From the menu, select "deletion flag".
(the location should be de-assigned from related data like product, model)
3. delete your location by using /SAPAPO/DELETE_LOCATIONS .
And if you have same location or same location product, I recommend you to add some kind of information to your location and product by using CIF user exit.
Please take a look at my comment in following thread.
Re: Integration multiple R/3 systems with APO via CIF
best regards
Keiji Mishima

Business system deleted

Similar Messages

Maybe you are looking for