Business System in SLD

Do I have to create each system as businass system into SLD?
Is it possible to work with business system (in Integration Directory) that not exist into SLD?

You have to use 2 services (Business system in SLD for application system).
Business System for role as Integration server has to be there.
Not to confuse you more you will have 3 business system in SLD.
2 for the target and source system as a role of application syetem and one for XI integration server.
Hope it helps,
Cheers,
Satish

Similar Messages

  • Problem with business systems in SLD

    Hey guys
    i m doing a IDOC to file scenario and m creating two business systems in SLD
    the first one uses the logical system name of the R/3 server and has been configured as WAS ABAP.
    when i try to create the second one as a third party using the logical system name i defined in BD54(on R/3 server),i get the error sayin that a business system already exist with the logical system name.
    i do have one businees system which is using the same logical system but that has been configured as WAS ABAP.
    cant i assign two different business names to same logical systems?
    thanx
    ahmad
    Message was edited by:
            Ahmad

    Hey
    thanx ,now when i try to use the same business system name for the R/3 server in the second scenaario,i dont see the business system in ID,i did cache refresh,
    also just want to make sure
    i have configured my SLD as under for the first scenario
    created two business system,first one is using the logical system name of the R/3 server configured as WAS ABAP and the second one is configured as third paarty and using the logical system name created in BD54.
    do these setting looks good to u?
    now can i use both these business system in my second IDOC to File scenariio?
    thanx
    ahmad

  • Error while deleting the business system in SLD

    HI
    I am trying to delete the business system in SLD and encountering the following error .
    if some one has any idea as to why is this error occuring
    java.lang.NullPointerException at com.sap.sld.wd.businesssystem.BusinessSystem.removeXIIntegrationServer(BusinessSystem.java:497) at com.sap.sld.wd.businesssystem.wdp.InternalBusinessSystem.removeXIIntegrationServer(InternalBusinessSystem.java:474) at com.sap.sld.wd.businesssystem.BusinessSystemMainView.RemoveOk(BusinessSystemMainView.java:450) at com.sap.sld.wd.businesssystem.wdp.InternalBusinessSystemMainView.wdInvokeEventHandler(InternalBusinessSystemMainView.java:477) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.clientserver.event.CustomEventProcessor.handleServerEvent(CustomEventProcessor.java:45) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleServiceEvent(WindowPhaseModel.java:361) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:128) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:330) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processPhaseLoop(WebDynproWindow.java:341) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:152) at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:297) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:706) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:660) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:228) at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:56) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:47) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Thanks
    Nikhil

    hi Nikhil,
    Null pointer errors are difficult to correct as is
    If you have imported the BS from some other system make sure the BS has been imported correctly without errors & any Tech systems attached to it exist.
    sachin.

  • Logical Sys Name for Business system in SLD for Third Party

    Hi !!
    I have little doubt what will be the logical system name for creating Business systems in SLD for third party?
    thanks
    Gowri

    Hi Gowri,
    sorry, i dont agree with the other answers. The logical system name is required for ALE partner finding. If you dont want to communicate with IDocs you dont need it. If you want to send messages from third party system to R/3 via IDoc adapter, then you should (can) give a name. It can be configured in IB directory as well (adapter specific identifiers). Choose any name, this name will be used for the partner agreement in R/3.
    Regards,
    Udo

  • Renaming Business System in SLD?

    Hello All,
    I'm wondering if there exists an Option to rename a Business System inside SLD. It should be renamed in Receiver Determination, etc. on the Integration Builder as well.
    In SLD I could rename a BS with "Administration/Content Maintenance". But what happens to the Directory if I would do so?
    Does anybody have any experiences with that?
    Regards,
      Marc

    Hi Sarvesh,
    using the configurator in the Integration Directory will save some time. After reimporting the Business System you let the configurator reconfigure receiver determinates, interface determinations and so on.
    Regards
    Thomas

  • Need to include the R/3 Business system in SLD.

    Now i need to include the R/3 Business system in SLD.
    To do that i have to establish an RFC connection, could anyone guid me what type of RFC connection i need to use like HTTP connection or else other..... Get me the details.

    The distribution, participation in distributing or otherwise sending of this material is against the law. The material you are requesting is copyrighted material and available ONLY to customers of SAP. If you need such documents from the SAP Service Marketplace then you must have "S" user ID and login yourself to retrieve this material. If you do not have a "S" user ID then you should contact your own internal company groups responsible and request one or request them to retrieve the document for you.
    By participating and sending such documents you are at risk for legal action and a removal of your account here on SDN and BPX.
    DO NOT send material via email such as this! Further actions will result in officials within your company and your SAP Sales Account being notified and could result in legal action against you as an individual.

  • How to Configure Business System in SLD (SAP-XI).

    Hi all,
      I am new to XI.  I want  to know the detail scenario of configuring Business system in SLD(System Landscape Directory) in SAP-XI.
    Can , anyone help me on this...

    hi suresh,
    gothrogh this below liks ..........
    http://help.sap.com/saphelp_nw04/helpdata/en/fe/39ae3d47afd652e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/7b/d4653fd1d3b81ae10000000a114084/content.htm
    http://wiki.sdn.sap.com/wiki/display/XI/WorkingwithSystemLandscapeDirectory+(SLD)
    regards,
    kesava

  • How to Remove Business System From SLD

    Hi Experts,
    I Created Business System For Web As ABAP.
    While Removing Business System From SLD Means I am Getting the Following Error.
    java.lang.NullPointerException at com.sap.sld.wd.businesssystem.BusinessSystem.removeXIIntegrationServer(BusinessSystem.java:497) at com.sap.sld.wd.businesssystem.wdp.InternalBusinessSystem.removeXIIntegrationServer(InternalBusinessSystem.java:474) at com.sap.sld.wd.businesssystem.BusinessSystemMainView.RemoveOk(BusinessSystemMainView.java:450) at com.sap.sld.wd.businesssystem.wdp.InternalBusinessSystemMainView.wdInvokeEventHandler(InternalBusinessSystemMainView.java:477) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.clientserver.event.CustomEventProcessor.handleServerEvent(CustomEventProcessor.java:45) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleServiceEvent(WindowPhaseModel.java:362) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:129) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:344) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processPhaseLoop(WebDynproWindow.java:355) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:152) at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:298) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:705) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:659) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:227) at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:150) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:56) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:47) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Please Let me know How to Remove it from SLD.
    Regards
    Khanna

    HI Khanna
    Delete the Business System in your IR and ID, if any interfaces are developed under this BS.
    See if any items in locked state...and also after deleting it...activate it and refresh the cache. this shud help
    If you deleted from everywhere then it should not give that message.
    Try after refresh cache using SXI_CACHE.
    Finally Delete the BS from SLD
    In general , that to be you are facing this type of problem only inthis situation , then you have to refresh SLD cache.
    See the below link
    /people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off - SXI_CACHE
    XI Runtime cache error: Cache contents are obsolete
    Cache Refresh - SAI_CACHE_REFRESH
    /people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
    Cheers..
    Vasu
    <i>** Reward Points if found useful **</i>

  • The Business-System  from SLD canu00B4t read

    Hello,
    during export from an configuration object folloging exception occure:
    "The Business-System  from SLD can´t read"
    It seams all OK ...
    Thanks in advance,
    Frank

    Did you change the name of the Business System in the past? Then you need to keep the old Business System name in the SLD, as during exporting and importing of configuration objects the history of the objects is checked as well.
    Regards
    Stefan

  • Setting Business Systems in SLD

    Hi,
    In our SLD, we have two different Business Systems associated with the same ABAP Technical System and same client too. One BS is related to one Integration Server (XI) -this BS was imported in SLD- whereas another BS is related to another one (PI).
    When we run a soap interface in XI, we see the request reaches the correct BS (XI BS). However, the response is sent by the PI BS through the XI interface, getting an error.
    We need to have both Business Systems due to we are using the same SLD for XI and PI.
    Any idea?
    Thanks in advance,
    Samantha.

    Hi Luqman,
    Their names are different. Each BS is related to a different Integration Server, but their ABAP TS and client are equal.
    XI interfaces should use the XI BS, whereas PI interfaces should the PI BS, but this is not so.
    Is there any option that selects by default a particular BS in SLD when both BS using the same TS?
    Thanks,
    Samantha.

  • Can there be more than one transport targets for a business system in sld

    Hi All,
    I have a question about transport targets in sld for sap xi 3.0 sp19.
    We have a requirement where a business system needs to have two transport targets.In SLD i see that only one transport target can be assigned. Is there any way to assign more than one transport target to a business system?
    I know that there can be more than one source for a business system where more than one  different business systems have the same business system as the target.
    I am not sure if a business system can have more than one transport target .If yes , what is the way to add more than one ?
    Please help .
    Thanks,
    Padmaja

    Hello,
    I know that there can be more than one source for a business system where more than one different business systems have the same business system as the target.
    As far as I know, you would have to change the target everytime you will transport it to a different target e.g 3 target systems = 3 times you change the transport target in SLD.
    Regards,
    Mark

  • How to change the ROLE: Integration server in business system in SLD

    Hi,
    I am facing error in communication, becuase the integration server has been attached to in correct business system with incorrect client (001 instead of 700).
    In SLD, business system, 'integration' tab there is button "Associate with XI'.
    I have selected the role as integration server for the corrrect business system and aslo gave the correct pipeline url for integration server.
    When I press the button "Associate with XI" and Save nothing happened.
    How do i change my integration server.
    Please help.
    Regards,
    Rehan

    Hi Gaurav,
    I have checked the teachnical system  and its of type WEB AS ABAP. and when i click on the business systems tab, there are two business systems. When i double click on the business systems
    I realised that both the business systems has been defined with role: integration server.
    IN one business system i can see that there is "associate with XI" button.
    But when i want to chnage the business system with correct client 700 , i tried pressing the button after entering the correct pileline url.... nothing happens.....
    Can you please let me know the procedure to chnage the technical system with respect to integration engine???
    PLease help as our project is held up due to this.
    regards,
    Rehan

  • Role of business system in SLD

    I am doing PI post configuration with Central SLD on solution manager.What should be the Role of the business system for solution manager?In sxmb_adm should I give this as application system? And what should be the corresponding integration server?

    Hi,
    it should be application and should be connected to PI as any other R3 application system. If you connect it ti PI, then enter the PI destination as explained in the PI configuration guide, section connection to other business systems.
    If you are not using PI, then it is not relevant - you should leave both fields empty
    regards,
    jaime

  • Business system from SLD not visible in Integration Directory

    Hi,
    As on the project I do not have access to the SLD, another team created new business systems there. However, when I try in the Integration Builder(Configuration) to assign the newly created systems, I cannot see them on the "Select business systems" page.
    What do you think might be the cause of that? (the SLD and the XI systems are fully customized and have been used successfully until now)
    Thanks in advance,
    George

    Hi,
    In Integration directory -> Environment(Menu) ->
    Click on Clear SLD Data cache and try again.
    If you are unable to get even after doing above step check whether cache is up to date or do full cache refresh. This will solve your problem.
    Regards,
    Sakthi

  • How to make an entry in transport tab of business system in SLD

    Hi gurus,
    In PI, in SLD we maintain Business systems. In this business sytem if we go to have a detail look there is a Transport tab.
    What is this used for and how to make an entry here.
    I'm a basis person and i'm configuring XI for the first time. Kindly help.
    Regards,
    Priya

    1. Yes , you have to maintain target business system for the EACH BS in PROD system.
    2. Normally we do have 2 different sld one is explictly for production system. another one is for dev and QA system. Once u done creating all the systems needed for the project. we will copy all business from the dev server to production server. So production server will have all BS from Dev and  BS of production server.
    3. i am not sure about this. i dont have particular docuemnts . normally we assign target business system in transport tab. and in Intergration Directory we will export the business system from DEV and and import the business system in production system.
    Regards,
    Balaji
    Edited by: Balaji Pichaimuthu on May 19, 2010 9:06 AM

Maybe you are looking for