Business system issue

Hi All,
I am working on SAP PI 7.31 dual stack ( SP8).
Our non- Prod SLD ( dev and QA) is pointing to QA system. Basis team have created one Third party Business System in QA System SLD .
The issue is while importing the Business system in Dev system i am not able to see the required Business system.
Moreover while checking the QA system i can see the same Buisness system present in the import queue of QA system.
I have done the SLD cache refresh and also done the delta cache refresh as well!
Can some one please help me out in this or anyone faced this issue before please revert back.
Thanks for your inputs on this.
Rgards
Prashanthi

Hi
Normally the transport path is like that
Dev----> quality--->production
In the SLD, the business system mapping should be like this
Source               target
DEV BS            QA and PRD PS
QA BS              PRD BS
How you are importing the business system in DEV ? by using transport ? have u check the log of transport request in SE01 or SE10
You can directly assign the business system in dev
Goto Business System--right click and select assign business system-->select the business system from SLD.

Similar Messages

ATP Check Issue - No business system could be determined for logical system

Dear all
Got an issue while executing ATP check on a planned order in product view,
with a message: "No business system could be determined for logical system"
CIF setting wise:
regular business system group maintained and assigned in place,
master data wise:
business system group info fine in product master,
Is there anywhere suggested to check under ATP setting:
category, check mode, business event, check control/check instruction?
Your kindest enlighting is appreciated,
Thank you,
mandy

Dear Mandy,
usually this error is caused by a missing customizing entry:
spro:
Integration with SAP Components
   Integration via APO Core Interface (CIF)
     Basic Settings for Creating the System Landscape
       - Maintain Business System Group
       - Assign Logical System and Queue Type :
Please read the documentation for these two transactions and create the systems.
You need to specifiy there all systems that are in your BSG. The documentation for the customizing of 'name logical system' in APO says:
To enable the transfer of data between SAP R/3 and SAP APO, you need to name both the SAP APO system in which you are working and the SAP R/3 system to which you want to transfer data as logical systems.
I hope this helps.
Regards,
Tibor

Registration of Business system for the Integration Engine Java in the SLD issue

Hi,
We have completed the installation of PI-AEX 7.4 SR1 then we ran the below wizards successfully.
- Configuration Wizard: PI-AEX initial setup
- Configuration Wizard: PI Self Test for AEX
However when we were Checking the AEX Configuration as per help.sap.com
Check the registration of a business system for the Integration Engine Java in the SLD:
    Enter https://<host>:<port>/sld .
    Choose Start of the navigation path Business System Next navigation step Integration Engine Java <SID> Next navigation step Integration End of the navigation path.
    The pipeline URL must be: http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet?ximessage=true .
More information: SAP Note 1435392
for us the Pipeline URL is as below
http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet
and the rest " ?ximessage=true " is not there.
Also we ran the below wizard
Configuration Wizard: PI Self Test for AEX
and it finished successfully without any issue.
Any Suggestions what could be missing.
Thanks,
Regard
Ahmed Mohammed

Hi,
I found the below SAPNOTE which confirms that the Pipeline URL should be
http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet
1564449 - PI CTC Wrong Pipeline Url after AEX Initial Setup
However on help.sap.com it is different.
Any one experienced the same ?
Regards
Ahmed Mohammed

Business System creating issue

there are two Production SAP R/3 on our landscape.
so we can see PRD on AHOST and PRD on BHOST on technical system on SLD. they are using same 100 client.
whenn i create BS, I got error message
"The selected client has an associated logical system name that is already used for another business system. select a different client"
Due to using same PRD, even though they are different host name, it show us when creating BS,
i think that it does not make sense because many r/3 sid are used by PRD or DEV.
does anyone has such issue?
thank you
YD

If both are brand new, or at least one is new (it means they're not being exchanging IDocs, BDocs, or are somehow connected to other SAP boxes like APO, BW, etc) you should consider to change one of the two logical systems in SCC4.
Otherwise... suppose you want to route an IDoc (coming from R/3) based on which PRD instance issued it: you won't be able using the LOGSYS, but you can prob use some other fields of the control record, properly set.
If you just don't mind, let your SLD think that you have just one system. For IDocs going to SAP, you'll just be able to decide whether they should go changing the pointing of your IDOC receiver channel.
But this is a very strange situation anyway. What I wrote are just suggestion based on exerience and common sense. Hope that helps somehow.
Alex

SPROXSET ...Unable to rectify Business systems not found issue..

Hi,
On doing a test of my proxy I am frustrated with an error " Business system not found". I have maintained SPROXSET values as IFR_aDDRESS = XI.XYZ.COM, IFR_PORT = 51000, IFR_USER = PIAPPLUSER and IFR_PASSWORD = XIPASS.
I encounter this error whenever I do a test on SPROXY and I can't see the business systems from the SLD. What am I missing here? My sldcheck , sldapicust are all good. The only error in sldcheck is LCR_SAP_BUSINESS_SYSTEMS gives a retuen code fo 4. Please advise on what I am missing here.
Teresa

Check RFC destination
The below links may be useful
How do you activate ABAP Proxies?
How do you activate ABAP Proxies? - Activate Proxy
ABAP Server Proxies - ABAP Server Proxy
ABAP Proxies in XI(Client Proxy) - ABAP Client Proxy
BSP a Developer's Journal Part XIV - Consuming WebServices with ABAP
File to R/3 via ABAP Proxy - ABAP Proxy
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm

Business system - inbound interface issue

Hello,
I have created a business system in SLD and assigned required SWCV in installed products tab.now i imported that business system in to ID.
But in my business system i am not able to find the inbound interfaces of perticular SWCV. (able to see some other i/b and o/b interfaces)
i have configured SLD perfectly. ( in business system -installed products tab i have assigned the SWCV and product and check box was ticked). but the same SWCV and it's interfaces are not reflecting at the ID>business system.
now this business system is using in so many interfaces. so i can't reimport again. So kindly suggest how can i get the inbound interfaces to my business system in ID.
Thanks in advance.......SARAN

Hi,
Check Cache Overview to see if you are facing any problem,
also if you create the BS with the proper SWC, etc etc. and few days later you define a new SWC to this BS, you have to refresh the configuratio in the SLD-->I mean, go to BS and check if all SWC associated are selected. if not, select them and try again. this is important if you want to define a routing rule in the Receiver determination.
Now if you are in the ID and you cannot see directly services filtering by BS, dont care just change the filters to ANY ANY and you will see all services.
Hope Helps
Thanks
RP

Transport issue( business system)

Hi experts..
My system land scape is XID (Dev)--> XIQ(Qua)---->XIP(Prd) and there is one more system called XIT ( it is replication of XIP(Prd) for testing .
actually we have upgraded service pack in XIT, now iam importing IR ID from XID to XIT to test all scenarios.
the IR is imported properly , but when iam trying to improt the ID iam getting error that " business system BP1" is not exist . actually BP1 is defined in XIP (production) system.
i cheked in SLD of XIT system , there are all business systems are available same as XID system.
iam not undertand while import why XIT is pointing the business system BP1 which is related to XIP (Prd) system?
i refresh all caches also , please tell me what could be the reason?
i gone through the blog still iam not clear.
thanks in advance.
Regards
vasavi

Hi,
>the proble may be because of.... intiallly XIT system is replication XIP . so by importing The ID from XID >and trying to overwrite the ID in XIT. so it may be leading to error?
No, Check whether you have declared the Business System ( SLD ) in the XIT which is equalent to the Business system declared in the XIP. If not Declare the Business System though it is not pointing to the Technical System.
Cheers
Agasthuri Doss

Business Systems and Business Service - does any difference

Hi Experts,
Could any one please guide me what is the difference between
Business Systems
and
Business Service.
Which situations we use Business Systems / Business Service.
Does it have any performance issues?
Why we are not configuring Business service in SLD?
Cheers Experts!!
Sunil

Hi Sunil,
Business System: Address a particular business system as the sender or receiver of messages.
A business system is an actual application system in a system landscape. A business system
(service) comprises information about the inbound and outbound interfaces and the software
component versions of the business system. The business system services are used when
configuring internal company processes.
Business Systems are Logical Senders or Receivers that exchange messages by using the Integration
Server and that are entered in the System Landscape Directory.
The Business Systems in the System Landscape Directory relate to a system landscape.
The Business Systems of business partners are therefore not entered in the System Landscape
Directory. To be able to address such business partners logically, use communication components in
the Integration Directory. A business system is a way of specifying a communication component in the
Integration Directory more precisely (business system component).
Business Service: Address an abstract business entity as the sender or receiver of messages.
Using a business service, you can define the technical or business subunits of the companies
involved and then assign them the relevant interfaces. The business services are used when
configuring cross-company processes.
In the PCK, the Service is of type Business Service. It represents an abstract, addressable unit.
Business services are used in cross-company processes, for example, if the parties involved have only
published their interfaces and not their system landscape, or it is only partly known.
Using a Business Service,we can define the technical or business subunits of the companies involved
and then assign them the relevant interfaces.
It is useful to use Business Services when configuring cross-company processes. Usually, the
interface descriptions of the business partners involved are made publicly available.
Also,There is already lot of thread regarding the same discussion, please see it below.
Business service or Business system??
Re: Business Service <--> Business System
Difference between Business service, Business system and Business process
Business Service vs Business System in Integration Directory.
Business Service (vs) Business System in Integration Directory.
What is the difference between Business System and Business Service?
business system and business service
Diff b/w Business service & Business System?
Regards,
Vinod.

Importing new business systems into Integration Directory PI 7.1

Team SDN,
Team We have presently upgraded to PI 7.1(inline upgrade XI 3.0 was the older version). There are some changes like Import of software component version from SLD to ESR. intially we use to do in Xi 3.0 by selcting tools and import, but now we have to do different manner like going to ESR click on new and under work areas we have SCV. Do we have any new procedure fro importing business system into integration directory PI 7.1.
Please share with members if wht are the new changes in PI 7.1 work proceses like the one i mentioned above importing SCV(please don't start ESR and blah blah) any real issues wht we will encounter in termsof PI 7.1
Thanks SDN.

Hi Madhu,
If you want to create a communication component for a business system from the System Landscape Directory (SLD), choose the Business System menu option.In the wizard, select a business system from the SLD and create a communication component for it in the Integration Directory.
refer below link..
http://help.sap.com/saphelp_nwpi71/helpdata/EN/3e/60653f0c9fa075e10000000a114084/content.htm
Regards,
Raj

** SPROXY is not working properly in Business System

Friend
My SAP Business System is having Ver 7.00. This system is already connected with our XI server. I face 2 problem when execute SPROXY tcode in this system.
1) System asks username & password for every click.
2) Whatever I have created SWCVs in IR, only SWCV names are displayed there are no objects under that.
I troubleshooted the following things.
I have run the following reports.
1) SPROX_CHECK_HTTP_COMMUNICATION - HTTP Communication is working fine.
2)SPROX_CHECK_IFR_RESPONSE - We get the response.
3)SPROX_CHECK_IFR_CONNECTION - Integration Builder connection is working properly and Data understood.
When I run the 4th report, SPROX_CHECK_IFR_ADDRESS, the data in the SPROXSET table is not shown.
Actually when I checked the data in the SPROXSET table, there is no data in that table.
Friends, how do enter data in SPROXSET table ? How to bring all the objects in SPROX under SWCVs.
Could you kindly help me to solve the above 2 issues ?
Thanks in advance.
Kind Regards,
Jegathees P.

Actually
when you run the SPROXY it does 2 things
1. can take the rep information from the table
2. can take the rep info from the exchange profile in the SLD
if you want the sproxy to take the data from the exchange profile do the following:
RFC Dest: should work fine.
LCRSAPAPI
SAPSLDAPI
SLDAPICUST should work fine?
Also in RZ70 TC you should point to the SLD.
This 2 RFC are Registered Programs, if this RFC is working then your Application system can ping to the SLD where the exchange Profile is present.
Message was edited by:
n Khan

SAP XI 3.0 - Error while reading the ID of own business system from the SLD

Error while reading the ID of own business system from the SLD for system Quality (QOC) and Client 100.
I get this error in the SXMN_MONI. The business process is that the Interface to send master schedule and finished inventory from the legacy system to SAP to create planned orders in SAP for all Plants.
I could able to get "SUCCESSFULLY PROCESSED" in development and production. But only in Quality I getting this error. Could anyone help me to fix this issue.
thanks...

Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar

Error while reading ID of own business system from the SLD for system

Dear all,
We running on a SAP PI 7.1 enhancement pack 1.I know that there some threads about this subject, but unfortunately all suggestions found so far didn't solve my problem:
- SLDCHECK reports no errors
- SLAPICUST: pointing to the SLD
- SXI_CACHE with full refresh: no result.
Does anyone have a clue for me?
Kind regards,
John.

I hope you are facing this prolem with one particular Business System.. Since you have checked all the points and still facing this issue then try below options..
1. First try to clear full SLD cache and then test.
2. If cache doesn't solve the issue then delete the Business System from SLD and Integration Directory first then re-create the BS in SLD and "Clear SLD Data Cache" from "Environment" menu in Integration Directory and then import the Business System and test your scenario.

Cannot Remove Business System

Hi,
I had created a Business System (BS_ABC_200) for different technical landscape for which we had assigned Client number 200 and logical client name also. After that the Business System was deleted by accident. Then i even deleted the technical system and created the technical system and also new Business System with different name.
Now, when i assign the new Business System in Configuration time, the Business System cannot be activated. The Error is "SAP System Id and Client name already existing with the service BS_ABC_200". Even though i had deleted in SLD.
If i create the Business system with same name "BS_ABC_200" then while assigning in configuration time i wont be able to see that Business System in the list.
How to overcome this issue, how can i delete BS_ABC_200 completely. Is there any runtime cache where i need to delete it.
Thanks,
Ramesh P

Hi,
In general , that to be you are facing this type of problem only inthis situation , then you have to refresh SLD cache.
See the below link
/people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off - SXI_CACHE
XI Runtime cache error: Cache contents are obsolete
Cache Refresh - SAI_CACHE_REFRESH
/people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
Regards
Chilla

Creating a Business system in the SLD

I am receiving an error message when trying to create a business system in the SLD. The error is "The selected client has an associated logical system nae that is already used for another business system. Select a different client."
Here is my issue. The business system that I am creating is for our R/3 4.6C production system. I currently have a business system for our R/3 4.6C quality system. Our prodution and quality R/3 systems do have the same logical system name and client number. This is because we recreate our qaulity R/3 system from our production system.
So, the question is, How do I create a business system in the SLD for my production R/3 system when the logical system name is used assoicated with and business system.
I should add that all my R/3 systems have been created as technical systems without any problems.
Thanks,
Jim

It is recommended to have all ALE names unique.
If it is not possible the following workaround can be used.
Create one system in SLD (business system/technical system) which contains the ALE name. Proposal: The production system
Create the other systems(dev/QA) without the ALE name
During configuration the production system will be configured as usual.
For Dev/QA systems: Define in the receiver agreement the header mapping and use The Receiver service to reference the production system. Because you reference the production system the ALE name of the production system will be used to fill the idoc.

Business Systems not appearing in the Integration Builder (Configuration)

Hi Experts,
I have created new business systems in the Integration Builder of my PI System.
This is not appearing in the Integration Builder.
I executed the delta cache in transcation SXI_CACHE but the issue is same. Please let me know what should I do to get the business systems.
Thank you.
Thanks
Kasee

Business system from SLD not visible in Integration Directory

Business system issue

Similar Messages

Maybe you are looking for