Business System name - SAP ERP

Hi everyone!
Quick question: my BASIS team created the Business System name for our SAP ERP, and they call it "DR1", which is the system ID.
Is this going to bother me in the transport situation? (All I imagine is changing all of my Configuration in PI (Sender agreement, and such) in a new environment, so I´m thinking about changing this ASAP.)
Any suggestions for the SAP ERP Business System name?
Regards!
Ricardo Sancio Lóra
Brazil

Hi Ricardo,
ll I imagine is changing all of my Configuration in PI (Sender agreement, and such) in a new environment,
You dont need to change the Sender agreement and other stuff in configuration while transporting to New system.
You can maintain transport targets in SLD of XI. Means you need to maintain corresponding target for DR1 into Quality system.
Ex: For DR1 transport Target QR1 in quality. This will automatically change Configuration object in Quality system. No need to maintain manually.

Similar Messages

Client no in SAP Business System name.

Hello All,
I am currently working on naming for the SAP PI objects.
In my previous SAP PI implementations I used naming like SIDCLNTNO ( f.e. DPECLNT110 ) and SAP Recommends that as well. However we faced problem while pointing the different client to SAP PI sometimes in quality. For example my business system name is XXXCLNT110 in QA. But as they want to do some performance testing they wanted to point it to 900 client. At that time technically we can point it but logically it becomes wrong as scenario is still refering to 110 client (XXXCLNT110 ).
So in my new project I am thinking of keeping business system name client independent. i.e. SAPERP_DEV. Let me know your views regarding the same ?
Thanks & Regards,
Dijesh Tanna.

Hi Dijesh ,
But as they want to do some performance testing they wanted to point it to 900 client. At that time technically we can point it but logically it becomes wrong as scenario is still refering to 110 client (XXXCLNT110 ).
---> for me "performance checking " is related to "technical settings" only !!!
It's the client No. which depicts the purpose of system like test ,Dev, Sandbox,....not other way !!! so logically also "SAPERP_DEV" is not correct ...In this fashion you will be tight coupling the business system name with the business context !!! and the solution will not be scalable !!
Consider a case where new ERP systems coming into the landscape
will you name it SAPERP_DEV1...SAPERP_DEV2.......
Hope my sincere views you would find useful !!
Regards ,

Business System Names during integration

Hi
I have a number of ABAP Proxy integrations between ECC and PI. My question relates to the name of the sender service when it appears in PI.
I have a system that is defined in the SLD as XXX009 (where XXX is the SID and 009 is the client number). Now when making proxy calls to my legacy system (PI 7.11) it appears as XXX009 but when calling my current system (PI 7.31) the sender system appears as XXXCLNT009.
Can I ask why the business system names are different? Why is one XX009 and the other XXXCLNT009 when the source ECC system is the same? It doesn't make sense?
Regards

Hi Robert,
A Business System can be a reflection of your SAP ECC system.
You register it in the SLD via transaction RZ70. This registration will create a technical system.
The name of the business system can be chosen freely. That is the reason why you see differences.
What I do is this: on the ECC system, go to transaction SCC4 and choose the relevant client.
Have a look at the business system name. Use that one in the SLD.
Generally, Business Systems reflecting an SAP ERP/ECC system are created like <sapsid>CLNT<client>
Hope this clarifies.
Kind regards,
Dimitri

Business system name important for IDoc scenario message routing?

Hello all,
I have following problem.
I have to setup with our client an IDoc scenario which is a little difficult.
The client sends project IDocs from Client ERP system to his own XI system next to our XI sytem and at last Internal Order IDocs to our ERP system. We use for each environments (DEV, TEST, PROD) a separately SLD, the client a central SLD. In each environments we use the same business name for our XI system "BS_XI". Now the problem. The client aren't able to configure two times the same business name "BS_XI" for routing to our TEST respective Production environment. DEV will not used. I know the B2B scenario should be used in this case but i have no chance to think about this. Manager decision!
So what can be the workaround.
I think about to provide our client a different Business system name "BS_XI_PROD" with different technical system informations for our PROD environment. So for my understanding, the business system name is unimportant in this case, important here the technical informations which you are able to see in "Display Adapter-Specific Identifiers". Technical system, Port and RFC configuration.
The namings convention for Business system is unimportant in this case, yes?
Many thanks in advance!
Regards,
Jochen

Dear Jochen,
Can you please clarify a bit? Is it a problem between customer's XI system and your XI system?
I think you can use Parties here. In the Party you can define some additional identifiers, with which you can differentiate the incoming IDocs.
(e.g.: in the identifiers tab, Agency=BS_XI, Scheme=ALE#KU (defined in the customer's partner profile), Name=a defined name in the IDoc control record)
So with this you will have a "Business System+Party" as an identifier, where you can use several parties with the same business system.
I hope it helps!
Regards,
Andras

Change business systems name

Hello,
I am sure this question has already been asked but I can't find anything in the forums...
We have PI 7.0 SP13, and I would like to know if there is a way of renaming a business system without deleting/recreating it ?
Many thanks for your help,
Best regards,
GL

Guislain,
Do you want to re-name the Logical System name or Business System name?
raj.

Fetching the business system name during graphical mapping

Hi,
After the receiver determination is done and in interface determination, while executing the interface mapping, i need the business system name for which the
mapping is under progress. This i need during mapping.
Also, i need the configuration scenario name during mapping.
Is there any XI internal variable/system variables which hold these values so that using user defined function they can be accessed and used in graphical mapping ?
In appreciate your input in this regard.
Regards
Ganesh

Hi,
For the configuration name you can map it with a constant and for the sender,receiver services and interfaces you nee to use the UDF as one mentioned below.
Imports com.racs.gpt.*;
public String getMapValue(String a,String b,Container container)
//String a denotes incoming data string |data1|data2|data3|...|dataN.
//String b = lookupID.
//container contains runtime parameters.
AbstractTrace trace;
String headerField;
java.util.Map map;
String result;
trace = container.getTrace();
// get constant map
map = container.getTransformationParameters();
CrossReferenceAPI maprule1 = new CrossReferenceAPI();
result = maprule1.getData(a,b,map);
trace.addWarning("result = " + result);
if (result.equals("$NULL$"))
trace.addWarning("XREF Error. Mapped data for " + a + " not found");
ErrorHandler errHandler = new ErrorHandler();
int lookupID = Integer.parseInt(b);
errHandler.logSQLError(map, lookupID, a, "");
result = "?";
return result;
Regards
Madhu

Set up Business Connector within SAP ERP 2005

Hello!
Which SPRO-Activity is responsible for setting up Business Connector within SAP ERP 2005 (only ABAP-Stack)?
What is the effort should be regarded for this issue?
Thank you very much!
regards
Thom

Hi Tony,
are you using gcj from Red Hat as Java? You can check this by
rpm -qf `which java`
This should point to either Sun JDK 1.4.2 for i386 and IA64 or IBM JDK 1.4.2 for x86_64
Thanks,
Hannes

Technical systems and Business systems in SAP XI

can any one tell me ,breifly explain the diff b/w <b>Technical Systems</b> & Business Systems?
steps to create Techincal system and Business systems?
and also Steps for creating Software Components? For Technical System we can create more than one Business systems ,what it means?can any one explain?

Hi
First I let u know with analogy and actual definition as below
Any module of SAP like MM, SRM, FICO ets makes a logical system in combination according to business requirements is a business system which is actualy hosted on an application server like ABAP AS or Java AS which is basically a technical system.
Technical systems are application systems that are installed in system landscape (a CRM server, for example). Most systems (Web AS ABAP and Web AS Java systems) automatically report information to the SLD about the elements that they contain by using the SLD data supplier programs. You need to manually register the following types of system only:
Standalone Java systems
Third-party systems
Business systems are logical senders or receivers that exchange messages by using SAP XI and that are entered in the System Landscape Directory.
The business systems in the System Landscape Directory relate to a system landscape.
The business systems of business partners are not entered in the System Landscape Directory. To be able to address such business partners logically, use services in the Integration Directory. A business system is a way of specifying a service in the Integration Directory more precisely (business system service).
U can also refer Blog's
Re: Difference betweeen Technical systems and Business systems
For creation of software component see link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3172d290-0201-0010-2b80-c59c8292dcc9
<b>Reward point if it help u understand
</b>
Message was edited by:
Ajay Kumar

Getting XI business system name Dynamically

Hi All,
I am using RFC lookup for one of our project requirment. we will be using one of our inputs as business system which hosts the RFC function module (RFC_READ_TABLE). in our dev it is our XI business system. But when we move these objects to quality or prod, this mapping fails because the name of the XI business system changes. Can anyone suggest me how we can get the xi system name dynamically.
Best Regards,
Deepika

Hi Deepika
You can use the function "Sender" or "Receiver" (depending upon whether your business system is sender or receiver) which is available under 'Constants' category in Standard funtions of Graphical mapping.
These functions give the current value of the businees system in the environment where the interface is running.
Let me knwo if you are still not able to pick it.
Thanks
Ram

Import ID Configuration Scenarios and keep the same Business System names

Hi Guys,
Is it possible to transport ID Configuration Scenarios Objects between 2 XI systems and keep the same names for both sender and receiver Business Systems ? That is, to skip the SLD lookup for transport Source and Transport Targets systems ?
I tried to create the same Business Systems under the same name twice, but this was not possible. Any ideas ?
The reason is that I want to transport all the objects from one XI DEV server to another XI DEV server.
Thank you,
Best Regards,
Evaggelos Gkatzios

Hi,
We have done same but with bit of manual work (without Transport).
Create SLD object in target system with same name as in Souce XI system SLD.
IR & ID was exported using TPZ files from Source system & were imported in Target system.
It used same object names in both XI systems.
Regards
Sushil

Change client in scenarios with SAP business system

Did you ever wonder how you can change the client of a Business System and it's related communication channels in scenarios that make use of SAP systems?
One might think that changing the client in the communication channel (sender and/or receiver) is enough.
Unfortunately this is not the case. If you change only the client in the communication channel you'll get the following error: "lookup of alternativeServiceIdentifier via CPA-cache failed for channel XYZ"
It took me a while to figure this out, but finally I got it.
Two options:
a) Either you create a new business system in the SLD and you restart the configuration of all your scenarios, or
b) You change the client from the business system in the SLD
I definitely didn't want to go for option 1, as it meant that I had to redo a lot of scenarios (sender agreement, receiver determination etc.). I would have lost significant time and the configuration work is subject to errors as well which would have meant retesting all of the flows.
Therefore I explain in this thread option (b)
SLD:
1) In the SLD in the Technical Systems area, create a new client for the Web AS ABAP system.
2) In the SLD in the Business Systems area, click on the system that is to be associated with a new client.
3) Click on the Integration tab
4) Change the associated technical system and choose your new client
remark: the name of the business system might be somehow misleading if you specified the client as part of its name.
Integration Directory:
1) Delete the Business System
2) Activate Changes
3) Import the modified Business System
4) Assign the new client to the communication channels related to the business system. (as the name of the Business System is still the same as before, the communication channels are automatically assigned to it)
5) Activate Changes

Danny
I would like to add two more things here -->
1) For Web AS ABAP Technical Systems, I would rather ask BASIS to execute RZ70 in order to create the entry in TS of SLD. This will list down all the client of the SAP server.
2) If the Business System name you created is not client specific like
SCP400_Tst /// Client specific name
SCP_Tst /// Not client specific name
I mean if the Business System name is not client specific then no need to delete the Business System just go for
Service ( Edit Mode ) --> Adapter Specific Indentifiers --> (click button ) Compare with SLD & then Apply button
And activate the changes.
Rest of the steps will reamin same as you mentioned.
- Lalit -

Business system and logical system names

hello experts,
Right now m creating scenarios of IDOCs, Files and RFCs. Just wanted to know that is it compulsory to give Business system name and Logical system names same?
Does it make difference if i will give both names different?
Regards,
H.S.

Hi,
I guess i have not explained you proprely.
Here logical system mean m asking abt the system name which we are using in RFC connections to make connection between two systems.
does Business system name and Logical system name should be same?
Actually right now we have done system copy of production system into our sandbox. So all the things are pointing to the production system.
I was just wondering, if i will just change ip/ hostname into the Technical system (ip of sandbox system) and keep business system name as it is( which is right now of production system)... then for me no need to create all ID Objects again. Its just an idea. So just wanted to check is it ok... bcz in ID i have more than 60 objects which i need to create again. and i have very less time
Or if anyone can tell me any good idea to do that.
Thankx in advance.
Regards,
H.S.

Scenario for interface between a non sap system and a SAP erp

Hello,
I need some help in order to elaborate a interface between a SAP ERP and a non-sap system with the help of a XI system.
   - At first regarding the interface from the non sap system and a SAP ERP :
       the non sap system sends a flat file to the XI system. The flat file contains a row with header data and rows with item data. We were thinking when the file arrives to the XI system, to save the data in a header database and in a items database in XI. is it possible ?
And then to have like a job that reads the database and creates idoc and sends them to the SAP erp and updates the xi header and items database with a flag that means that the records have been sent to the SAP erp.
   -   Regarding the interface SAP erp to non SAP system:
       the SAP erp sends idoc to XI. Then the idocs are transformed into flat file.
Is this scenario possible ?
Do we need any adaptator between the non sap system and the XI ?
Thank you for your help
Christophe

Hi Bontron,
Idoc doesnot support synchronous call. So you can use either proxy or function module and inturn call the idoc from them and send response back to xi. You need to have two scenarios for your design.
Scenario1:   Source File (file adapter) -- xi -- Dump into database tables (Jdbc Adapter)
Scenrio2: Pickup form Database tables (Jdbc Adapter) -- xi -- RFC Adapter ---> This is synchronous call.
Regarding the interface SAP erp to non SAP system
You can send idoc to xi and from there use File adapter to send to the receiving system.
These blogs may help you to some extent:
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
https://wiki.sdn.sap.com/wiki/display/XI/step%2bby%2bstep%2bRFC%2bto%2bJDBC%2bscenario   (your scenario will be opposite to this)
Regards,
---Satish

How can i find the appreciate XI content: Control System - SAP ERP?

Hi all,
I'm try to find an XI Content for Control System (Insite is our Control System) - SAP ERP. I don't know if it exist an XI Content Control System (Insite) - SAP ERP? If this XI Content is exist, how can i find it and the document about this XI Content?
If anyone do or did an integration scenario between Control System - SAP ERP and know the appreciate XI Content for this scenario, could you please help me?
Thanks a lot in advance,
Vinh Vo

hi
check whether the content is available in SMP
https://service.sap.com/swdc -> Content
The XI content details can be found here.
rgds,
Arun

Make Business systems visible within SAP PI Tools

Hi!
I defined technical system and business system as well within SLD. Now I would like to see this business system within SAP PI tools (such as Integration Builder).
Question:
Which actions are requiered after the definition the technical and business system in order to work with these systems in SAP PI tools?
Is thers some documents describing this issue?
Thank you!

Hi,
The order for without party is simple, just import it, then
1. Create configuration scenario
2. Assign this system to your scenario
3. Create communication channels
4. Create Sender Agreement, Receiver Determination, Interface Determination, Receiver Agreement
And for with party.
1. Create Party in Integration Directory
2. Assign business system to this party
Now when you create your scenario
1. Create configuration scenario
2. Assign this party and system to your scenario
3. Create communication channels
4. Create Sender Agreement, Receiver Determination, Interface Determination, Receiver Agreement
>>- Creation of Party
First
>>- Creation of Business component
Second
>>- Creation of Scenario
Third
>>- Assign Business system
Fourth
Hope now it is clarified.
Regards
Suraj
Edited by: S.R.Suraj on Oct 1, 2009 4:33 AM

Business System name - SAP ERP

Similar Messages

Maybe you are looking for