Business System não aparece Integration Builder

Boa Tarde Pessoal,
Criei um novo Business System no SLD do ambiente onde estou configurando a NFe 2.0, porém quando tento atribuí-lo no Integration Builder o mesmo não aparece na relação.
O novo Business System não está atribuído a nenhum Business Service uma vez que acabei de cria-lo no SLD.
Existe algum procedimento que estou deixando de executar?
Desde já grato,
Guilherme

Guilherme,
Você já tentou limpar o SLD cache ? Você pode fazer isso através do seguinte caminho no Integration Builder: Environment -> Clear SLD Data Cache
Após isso, tente entrar na aba Objects do Integration Builder e abrir o item Service Without Party , clique com o botão direito sobre a opção Business System e após Assign Business System, deverá aparecer para seleção seus Business System na opção: "3. Select Business System".
Espero ter ajudado.
Abs.,
Cristian

Similar Messages

Business System not imported to Integration Builder

Hi,
I have created the Business System in SLD and when I imported that into the Integration Repositoty, I am unable to locate the same. Could anyone let me know the problem in this?
Regards,
Ram Mohan Naidu

hi,
you don't import business systems into repository
you can import them into Directory
you can only import <b>Products</b> ans software components into Repository
Regards,
michal

SLD Business system not appearinn in Integration Directory Configuration

Hello,
I have configured a business system in SLD(defined a Technical system,assigned it to a business system),but when i go to
Integration directory and assign a business system without a partner,I am not able to see this business system.
can any one please help.
regards
kaushik

environment -> clear SLD cache

ABAP business system vs. 2 integration systems - using proxy

Hi guys,
is it possible to use one abap ECC with 2 PI systems and using proxy classes for both PIs?
Thanks

Hi Alakov,
This is not possible. In a SAP environment, u can have one Integration Server (which is XI/PI) and the rest backend systems act as Application systems.
These backend application systems point to a single Integration Server using rfc destination (create in sm59). for ex: ECC points to PI from sxmb-adm -> Integration Engine Configuration. Here you set the ECC/backend system as Application system and provide the rfc destn of corresponding Integration Server (ex: dest://INTEGRATION_SERVER_DX1)
If you have to use 2 PI, then you have to switch between the connections all the time which is obviously not feasible.
Souvik

Re: Business sytem availability in Integration builder

Dear Techies,
Iam trying out one preliminary test scenario to map between two flat files.
I had defined only business system sender at starting phase and after building the mapping scenario I again gone back to the SLD and created the business system receiver. But while iam trying to generate configuration part in Integration Builder Iam unable to find the receiver business system which I had created after mapping scenario.
How to find the business system in configuration of integration builder.
Thanks in Advance.
Regards,
Kiran

Dear Hareen,
Thanks alot for your reply.
After cleaning the cache also iam unable to find the reciver businees system which i had defined in SLD while assigning the business system in integration builder
Thanks in advance.
Regards,
Kiran

Transport does not map business systems

Hello,
we have a problem when transporting XI configuration objects (via normal file export/import, not CMS). In the SLD, we have configured business systems
T01CLNT010, belongs to group dev and has transport target PROCLNT010
T01CLNT020, belongs to group dev and has transport target PROCLNT020
the strange thing is the first business system is not converted correctly to the prod business system after transporting the XI config from XI dev to XI Prod. For the second business system, that works fine. I compared the entries in the SLD, both look fine. But one does not work, the other does.
For the one that does not work, the transport goes fine, does not show any error, but just does not convert the name. (which of course will lead to an error when trying to activate the objects, because T01CLNT010 does not exist in XI prod). So it seems it cannot find the SLD transport target for that object.
Does anyone know how XI exactly finds out how to convert the business system while transporting it to production ? How does it find the connection between the XI business system object and the corresponding SLD entry ? Just by name ? Or is some kind of internal GUID used which may have been broken ? Can I see that anywhere ?
Is it safe to re-associate the SLD business system to the XI business system in the XI integration builder ? Or are dependent objects (e.g. receiver det.) then lost ?
CSY

Does anyone know how XI exactly finds out how to convert the business system while transporting it to production ?
The only thing that matters here is properly defining the Transport Targets.
How does it find the connection between the XI business system object and the corresponding SLD entry?
Not sure about this but I think the name in the transport target would suffice for this requirement. Also, make sure that the groups are properly defined and target SLD has all business systems properly maintained.
Is it safe to re-associate the SLD business system to the XI business system in the XI integration builder ?
How will you be doing this re-association? If you are thinking of changing the Business system name in ID manually, then it would mean almost complete development in ID.
Regards,
Prateek

Integrated Business Systems

Hi All,
What is the significance of the 'Integrated Business Systems' option in the SLD under Business System. I hav a scenario File -> XI -> IDOC. i have 3 independant scenarios of the same kind.
Scenario1:
BuisnessSystem1(DELVRY03) -> XI -> Dev
BusinessSystem2(WMMBIDO2) -> XI -> Dev
BusinessSystem3(WMMBXY) -> XI -> Dev
In my Dev, only one partner profile has been created.It looks like
XILogicalSys(Logical System of XI)
Inbound parameters:
DELVRY03
WMMBIDO2
WMMBXY
When i checked my XIBusinessSystem (XILogicalSys is the logical system name for the same) in SLD, under the Integrated Business Systems, my BusinessSystem1,BusinessSystem2,BusinessSystem3 are listed. but for all my BusinessSystem1,BusinessSystem2,BusinessSystem3 no logical system name was given. when i pushed the IDoc from XI, I'm getting the most common error <b>Unable to convert sender service to an ALE logical system</b>.
I have seen in some posts that logica system names for BusinessSystem1,BusinessSystem2,BusinessSystem3 have to be created and for the same logica system names the partner profiles have to be created in Dev. But is it the right way to create a partner profile for each individual business system? then, why is the option Integrated Business Systems under the XIBusinessSystem in the SLD is listing all the Business Systems BusinessSystem1,BusinessSystem2,BusinessSystem3?
Can anyone help me in this regard?
Any help wud b gr8ly appreciated.
Thnx in Advance
Anil

Hi Anil,
There are couple of Technical solutions for your problem.
Option 1.
Give LS name (as given for partner profile in SAPR/3) for any one of the business system.
Use this Business system in Reciever agrement as sender service in rest of 2 scenarios.
Option2: Create one business service and attach desired logical system name and use in all 3 scenario.
You cannot have same logical systemname for more than one business system and import to same XI Box.
Option 3: Create a common Business system(other than mentioned Business system) and attach LS name to it and use this common Business system in reciever agreement of all scenarios want to post IDOCo said partner profile.
I feel 'Integrated Business Systems' is the list of business system using common Related Integration Server.
Hope it helps.
Regards,
Satish Chauhan

Registration of Business system for the Integration Engine Java in the SLD issue

Hi,
We have completed the installation of PI-AEX 7.4 SR1 then we ran the below wizards successfully.
- Configuration Wizard: PI-AEX initial setup
- Configuration Wizard: PI Self Test for AEX
However when we were Checking the AEX Configuration as per help.sap.com
Check the registration of a business system for the Integration Engine Java in the SLD:
    Enter https://<host>:<port>/sld .
    Choose Start of the navigation path Business System Next navigation step Integration Engine Java <SID> Next navigation step Integration End of the navigation path.
    The pipeline URL must be: http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet?ximessage=true .
More information: SAP Note 1435392
for us the Pipeline URL is as below
http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet
and the rest " ?ximessage=true " is not there.
Also we ran the below wizard
Configuration Wizard: PI Self Test for AEX
and it finished successfully without any issue.
Any Suggestions what could be missing.
Thanks,
Regard
Ahmed Mohammed

Hi,
I found the below SAPNOTE which confirms that the Pipeline URL should be
http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet
1564449 - PI CTC Wrong Pipeline Url after AEX Initial Setup
However on help.sap.com it is different.
Any one experienced the same ?
Regards
Ahmed Mohammed

Business System of type Integration Server In SLD .

Hi
Can anybody tell what is the criteria on which we decide whether a business system to be created in the sld should be of type Integration Server or Application System .
And also can we have only one Business system of the type integration server in the sld ?
Can anyone please explain the concept behind this.
Thanks
Nilesh.
Edited by: Nilesh Taunk on Jun 19, 2008 7:24 AM

hi,
steps to create a business system
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&
If there is no business system for integration server, that means the post installation steps are not completed or someone messed with the business system for integration server.
To define a business system, follow post installation steps from install guide.
http://service.sap.com/instguides
SAP NetWeaver -> Release 04 -> Installation -> SAP XI -> Installation Guide - SAP Exchange Infrastructure 3.0 SR1 follow page 38
If you do not have integration server, that means your XI will not work.
Thanks,
Vijaya

Why specify Integration server when create Business system?

Hi, all:
I had difficult understanding why we need to specify the assigned Integration Server when we create Business System. What is the reason for this? What is the mechanism underbeneath this?
It is easy to understand that when creating BS, you need to specify TS name, product and SWCV. But why integration server?
Will you please explain to what your understanding it regarding this topic?
Thanks,

This is because the same SLD could be used to connect to more than one Integration Server. This is a typical requirement wherein the system landscape has Dev, Quality & Production systems and all the XI servers uses same SLD. At that time it would be easy to specify which Business system will refer the Integration Server of which XI system.
Regards,
Prateek

Error while reading ID of own business system from the SLD for system

Dear all,
We running on a SAP PI 7.1 enhancement pack 1.I know that there some threads about this subject, but unfortunately all suggestions found so far didn't solve my problem:
- SLDCHECK reports no errors
- SLAPICUST: pointing to the SLD
- SXI_CACHE with full refresh: no result.
Does anyone have a clue for me?
Kind regards,
John.

I hope you are facing this prolem with one particular Business System.. Since you have checked all the points and still facing this issue then try below options..
1. First try to clear full SLD cache and then test.
2. If cache doesn't solve the issue then delete the Business System from SLD and Integration Directory first then re-create the BS in SLD and "Clear SLD Data Cache" from "Environment" menu in Integration Directory and then import the Business System and test your scenario.

Logical system not updated in the business system adapter specific data par

Hello Guys,
I changed a logical system name in the sld for a business system and that that is not reflected in the Integration directory adapter specific data tab.
I did a cache refresh using :
1) sxi_cache --- Full cache refresh, delta cache refresh
2) Hard cache refresh
3) In ID "Cleared SLD data cahe "
4) Refreshed the exchange profile
But no use
Can you please tell how i can get the logical system name for the business system updated in the Integration Directory.

When you change it in SLD and if not getting replected in the ID...make sure you run the cache again, perofmr the comeplete cache....
there is an option under the adapter specific mesage attributes compare with SLD you can click that, is nthing happening after clicking it?
Run the cache in the ID are there any errors there?
check the RWB cache monitoring is everything green there?

Business System and Client

Hi
I checked many treads and still I couldn't get a satisfactory explanation to the difference between Business System and Client. I read in help.sap site that multiple business systems can be assigned to a single technical system and also each numbered client of an SAP system is a Unique Business System ? So are client and business system one ? If so why use it interchangably ? And if many business systems can be assigned to the technical system how do we specify a related Integration Server ? As I understand only one Business System can be assigned Integration server. So if we assign many business systems to one technical system then how can we have related Integration server for all ? I couldn't get a satisfactory explanation to this doubt in any thread in this forum
Midhun

>>each numbered client of an SAP system is a Unique Business System ?
It could be. But it is not necessary that each client of SAP system is communicating with PI. If it is then there will be one Business System for each client.
>> So are client and business system one ?
No. Client is more substantial category in SAP system. Business system just defines the logical name to these clients if they communicate with PI.
>> If so why use it interchangably ?
Actually they can't be used interchangably always. The only relation is that for each client of SAP system, there could be only one Business system.
>>And if many business systems can be assigned to the technical system how do we specify a related Integration Server ?
For related Integration Server name, you need to select the PI Business system name which would communicate with your business system. For a single SLD scenario you will see PI Dev, Q and Prod business systems.
>> As I understand only one Business System can be assigned Integration server.
Correct. Its a PI Business system.
>> So if we assign many business systems to one technical system then how can we have related Integration server for all ?
For all Business systems of 1 technical system, you need to select the same PI Business system name.
Regards,
Prateek

Business System in SLD

Do I have to create each system as businass system into SLD?
Is it possible to work with business system (in Integration Directory) that not exist into SLD?

You have to use 2 services (Business system in SLD for application system).
Business System for role as Integration server has to be there.
Not to confuse you more you will have 3 business system in SLD.
2 for the target and source system as a role of application syetem and one for XI integration server.
Hope it helps,
Cheers,
Satish

Same Technical System multiple Business systems?

Hello,
We have a unique (atleast i felt it) landscape where we have 2 Prod PI system. We have divided out interfaces logically into 2 categories and they will run on the respective prod system. Both this prod have its own SLD and hence there is no issue here.
The issue is with the Pre-Prod where like prod we have 2 PI systems (and 2 integration servers) but they both share the same SLD. We have only one SAP R/3 backend system and hence we have only one technical system in the SLD but this SAP R/3 system has to connect to both the Pre-prod systems for different interfaces. For this to happen we have to create 2 Business systems with the respective PI pre-prod Integration Server. But SLD doesnt allow to create 2 business systems for the same technical systems.
Is there any way around this as we cannot change the SAP R/3 system and also cant have different client in R/3 for each of PI Pre prod.
This is a major roadblock and requires your expert advice on how to proceed in this scenario.
Regards,
Yash

Shitij,
You are correct in understanding that the requirement is to create 2 business systems for the same technical system with same SID (S*1) and same client.
The reason i need this is because I have 2 PI system P1 and P2 with 2 different integration server which share the same SLD. Now when i create a business system for S1 i specific the inegration server for P1 and add this business system in the transport target for P*1.
How will i do the same for P2? I cannot create a new business system for S1 with integration server of P2 and add it in the transport target for P2. If i dont do it i cannot do any transports as it will give error like no Business system found in SLD.
Hope i made it clear.
Yash

Business System não aparece Integration Builder

Similar Messages

Maybe you are looking for