Business System not imported to Integration Builder
Hi,
I have created the Business System in SLD and when I imported that into the Integration Repositoty, I am unable to locate the same. Could anyone let me know the problem in this?
Regards,
Ram Mohan Naidu
hi,
you don't import business systems into repository
you can import them into Directory
you can only import <b>Products</b> ans software components into Repository
Regards,
michal
Similar Messages
-
SLD Business system not appearinn in Integration Directory Configuration
Hello,
I have configured a business system in SLD(defined a Technical system,assigned it to a business system),but when i go to
Integration directory and assign a business system without a partner,I am not able to see this business system.
can any one please help.
regards
kaushikenvironment -> clear SLD cache
-
Business System não aparece Integration Builder
Boa Tarde Pessoal,
Criei um novo Business System no SLD do ambiente onde estou configurando a NFe 2.0, porém quando tento atribuí-lo no Integration Builder o mesmo não aparece na relação.
O novo Business System não está atribuído a nenhum Business Service uma vez que acabei de cria-lo no SLD.
Existe algum procedimento que estou deixando de executar?
Desde já grato,
GuilhermeGuilherme,
Você já tentou limpar o SLD cache ? Você pode fazer isso através do seguinte caminho no Integration Builder: Environment -> Clear SLD Data Cache
Após isso, tente entrar na aba Objects do Integration Builder e abrir o item Service Without Party , clique com o botão direito sobre a opção Business System e após Assign Business System, deverá aparecer para seleção seus Business System na opção: "3. Select Business System".
Espero ter ajudado.
Abs.,
Cristian -
Error: System not configured as Integration Engine
Hi ,
I was trying to simulate the following scenario in SAP XI:
HTTP--> SAP XI --> (RFC/BAPI)SAP R/3
Let me clear what i did.
I have to call a BAPI using RFC adapter in XI to display some information on a request of some Http app.
1. I have Imported the RFC BAPI into IR.
2. I have created the XSD files for http Re and res messages.
3. I have created the XSLT mapping programs and put them in a zip file and imported into IR.
4. I have created a Interface mapping and assign the created messages and mapping programs.
5. In ID i have created a Business service for my web application.
6. Receiver determination created in Id and Interface determination and receiver agreement in ID and activated the changes.
7. I have tested the same by sending the request from my web application to xi plain http adapter as follows:
http://grserver:8000/sap/xi/adapter_plain?bs=XIWS_web&namespace=urn%3Axi%3Asap%3Awebapp&interface=HTTP_out&qos=BE
and in the result i have got the following error:
"System not configured as Integration Engine"
but i have tried it many times and some times it gives me correct results but after that the same error ios coming.
so can you tell me what could be wrong in the configuration of XI of what is the solution for this problem.
Reagrds
Gopesh Kumar AgarwalHi,
What is the version of XI you are using? If u are usign XI2.0, ur URL is correct. But if you are using XI3.0 then use <b>service</b>=<SENDERSERVICE>instead of
<b>bs</b>=<SENDERSERVICE> parameter in your URL.
<b>bs</b> is replaced by <b>service</b> in XI3.0
Your URL will be http://grserver:8000/sap/xi/adapter_plain?<b>service</b>=XIWS_web&namespace=urn%3Axi%3Asap%3Awebapp&interface=HTTP_out&qos=BE
Hope this helps you.
Cheers,
Siva Maranani.
Message was edited by: siva maranani
Message was edited by: siva maranani -
How can ID automatically change the business system while importing?
Hi gurus,
There are many scenarios in our PI system. It will be a tedious work if we don't use transport system(CTS+).
You know we have to create the scenarios manually in Integration Directory since the business system is different.
The question is as below (BTW:We are using local SLD for dev,qas,prd separately):
If we don't use transport system, and only use export and import functionality, and create business system group, can we make the ID automatically change the name of business system while importing?Hi Xinjiang,
You can follow below method.
In Quality system transport targets will be DEV(Dev pi system) ---> QEA(Quality PI system)
In Production system transport targets will be DEV(Dev pi system) ---> PEA(Production PI system)
This will ensure that you does not need to create separate request in Quality system. You can use the same request created in Dev to transport to production system. This will reduce your efforts of transportation. This is the same type of approach that is followed in ECC system as well or next solution is creating transport target in each sld system as you mentioned below,
we have three local SLD, so we need to create TS and BS for PI DEV in SLD QAS, and create TS and BS for PI QAS in SLD PRD,
Following link will help you for defining transport target.
http://help.sap.com/saphelp_nwpi71/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm -
SPROXSET ...Unable to rectify Business systems not found issue..
Hi,
On doing a test of my proxy I am frustrated with an error " Business system not found". I have maintained SPROXSET values as IFR_aDDRESS = XI.XYZ.COM, IFR_PORT = 51000, IFR_USER = PIAPPLUSER and IFR_PASSWORD = XIPASS.
I encounter this error whenever I do a test on SPROXY and I can't see the business systems from the SLD. What am I missing here? My sldcheck , sldapicust are all good. The only error in sldcheck is LCR_SAP_BUSINESS_SYSTEMS gives a retuen code fo 4. Please advise on what I am missing here.
TeresaCheck RFC destination
The below links may be useful
How do you activate ABAP Proxies?
How do you activate ABAP Proxies? - Activate Proxy
ABAP Server Proxies - ABAP Server Proxy
ABAP Proxies in XI(Client Proxy) - ABAP Client Proxy
BSP a Developer's Journal Part XIV - Consuming WebServices with ABAP
File to R/3 via ABAP Proxy - ABAP Proxy
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm -
System not configured as Integration Engine
Hi Friends ,
I have written an outbound client proxy for my interface . I am using XI to File Adapter scenerio .
When I run the zprogram in R3 then I get the error
System not configured as Integration Engine ...
Please suggest .
Best Regards
ChanHi Chane,
Go to SXMB_ADM->Configuration->Integration Engine COnfiguration->Choose your R/3 system as Application System
Refer this Configuration Guide - Page no 27
https://websmp102.sap-ag.de/~sapidb/011000358700001697502004E.PDF
Regards,
Moorthy -
Business system not found in CPACache
Sceinario was working fine before XI system crash. After the system is reestablished the scenario not working. Giving RFC error "Service: SAPESRI not found in CPACache" in R3 system
CPAcache refreshed for dela as well as full
Adapter specific identifiers are fine
SLD cache cleared in IR ID
Business System name is found in CPAcache
error repeated
Business System deleted from SLD. New business system Created. Entire scenario reconstructed. All the above are also fine.
Still error is repeating.
Can anybody give a solution for this problem please?
Regards,
VenkatHi Venkat,
The subject of the problem & the problem explanation is varing i.e *Business system not found in CPACache*
However, the problem still lieing with SLD. So, test the SLD and activate the scenario. Also without refreshing CPA cache you will have to perform execution.
Regards
Pothana -
Business Systems not appearing in the Integration Builder (Configuration)
Hi Experts,
I have created new business systems in the Integration Builder of my PI System.
This is not appearing in the Integration Builder.
I executed the delta cache in transcation SXI_CACHE but the issue is same. Please let me know what should I do to get the business systems.
Thank you.
Thanks
KaseeBusiness system from SLD not visible in Integration Directory
-
Business systems not showing in I.D( Integration Directory)
Hi Guys,
I Completed the Configuration up to I.R( Integration Repository). in integration Directory i created a scenario. under Service without party when i am trying to assign Business systems. it is not showing any Business Systems. i already Created Business systems in S.L.D. any body have any idea why it is Happing. Thanks in advance.
Thanks
Kiran.BGo to Objects tab and find your Buss. System. Right click on this and select add to scenario. Buss. system should be imported into ID only once.
If you cant find your Buss system in ID, then use the menu Environment --> Clear SLD data Cache.
Regards,
Jai Shankar -
Business System not reflecting the XI Content for SRM
Hi,
We are currently working on the SUS-MM scenario.
The landscape includes PI 7.11, SRM 7.0 and R/3 4.6C. SLD Communication is working fine between these systems.
Integration Builder has SRM Server 7.0 and SRM Server IC 7.0 imported.
The current status:
We can successfully transfer vendors from SAP R/3 to SUS
We cannot transfer transaction data from SAP R/3 to SUS, e.g. purchase orders etc
Our Main Issue:
The Business System INTEGRATION_SERVER_<SID> is imported into the Integration Builder from the SLD.
On the Display communication component screen, the receiver and Sender tabs are not showing any of the SRM Server or IC components that have been imported into the ESR. However is displaying only the BASIS components that was imported during inital install.
Because of this, we are not able to proceed with the configuration though the interfaces being available in the ESR. We are not sure what is that we are missing that is preventing the XI content for SRM from being displayed. Also, the PI business system in the SLD has the SRM Content listed under the installed products list.
Any help would be appreciated.
Thanks
Venkat.Hello,
do you have a solution? I'm facing the same issue.
Regards,
Sven -
Transport target for business system not found in System Landscape Director
Folks,
We have new installed new PI 7.1 system and importing interfaces from the OLD XI 3.0 system in to new PID 7.1 system.
We are getting following error when we try to import an interfaces in to new PID system:
Import failed because of business system transfer object
Communication component XID_FileSystem: Obligatory
transport target for business system XID_FileSystem not found in
System Landscape Directory
We are yet to install PIQ system.
All the interfaces in the old XID system have transport target of XIQ system. I removed the transport taget for the interface, but transport target is still showing in the Business system under transport target head.
How can we overcome this issue as we will not have PIQ system atleast for two weeks.
Thanks in advance,
Regards
ChanduHi,
You need to maintain Transport Groups and target for business systems while SLD transports between your XI system and PI 7.1
Illustrated with DEv & PRD here.
Procedure:
1) Call Integration Builder screen on DEV Server with http://hostname:J2ee Port/rep
2) Call SLD (System Landscape Directory) Component from the Integration builder
Save all the Following .zip files on the Local Desktop
3) Select the Software Component & say Export that you want to Export from DEV
Server to Production server and which is going to use in the IR of XI
4) Also Select the Product of the above SWC and say Export
5) Select the Technical Systems (TS of XI & TS of the SAP R/3) and say Export
6) Select the Business System(s) & say Export; those are associated with above Exported
Technical systems.
In Production Server
1) Logon to the SLD of the Production Server.
2) Create a Technical System and Business system which points to the Production SAP R/3
3) Go to Administration TAB in the main page of SLD
4) Select the Import option to Import the SWC , PRD, TS,& BS which we Exported Earlier in DEV Server
5) Click on Browse and select the .zip files that is to Import into Production Server,
Which were stored on the local desktop at the time of DEV Server Export
And say Import Selected File Option
By this we exported and imported the SLD Objects
Now we have to create transport groups and transport targets in the Production server of SLD
Creation of Transport Groups
Edit GroupsGroup1) Select the Business systems
2) Click on New Group and give the name of the group as DEV_group & select the
Corresponding Development serveru2019s integration Server
3) Similar way create another group for Production serveru2019s business system as
PRD_group and select the Production serveru2019s integration Server
Creation of transport targets
This is to Define which business systems in two different groups correspond to each other
1) Select each Business system in the SLD and select transport TAB---click on
Add/Change Target and select its corresponding target business system.
For Example:
If you select the business system of Production XI server means
In the target you have to select group as DEVGROUP and the business system of Development XI server.
Like this do the same for other business systems also
Ex:
BS_PRD_Integration Server----
BS_DEV_Inetration Server
How to create Transport Groups & transport Targets
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
Regards
Seshagiri -
Replication Business Systems not availble for Replication
Hi All,
We configured MDG 7 F workflows for all objects.
When We try Replication by Objection Selection option. ( Search GL Account--> Select Record --> Click on Replicate Button) , We are not getting target business sytem to select for the replication. This problem is occuring all finance objects like GL,Cost Center,Profit Center,Item,Company etc..
But, When we try Data Replication --> Replication by Objects option / Data Replication --> Replication by Replication Model options, We can see target business systems and able to replicate successfully.Hi,
It happens sometimes due to Meta Data Issue,
Go for SLD Cache :
To clear the SLD cache, from the Integration Builder main menu, choose Environment ® Delete Cache for SLD Data.
Once we have deleted the cache for SLD data, accessing objects in the SLD may take longer than usual initially.
Still If you are not able to see the Business System when trying to import the business system. Go to Objects tab in ID --> Business System and you will find the imported Business System --> Right Click and ADD to Scenario.
Regards
Agasthuri Doss -
Design Objects created in Enterprise Services Builder not appearing in Integration Builder
I am fairly new to PI, so hoping someone can help. I have created a number of design objects (DataType, MessageType, ServiceInterface, MessageMapping, OperationMapping). I had also imported an RFC object successfully as well that is used in the creation of the design objects. All have been saved and activated, and there are no apparent errors listed.
After saving and activating the objects, I went into Integration Builder, and created a new Configuration Scenario. However, when trying to add in the Interface Determination, Receiver Determination, Sender Agreement, and Receiver Agreement, I do not see the the RFC object or design objects that were created in the Enterprise Services Builder.
Can someone advise as to whether or not I have missed a step somewhere? Or perhaps there is something else that I need to do before I can get the design objects and imported RFC object to appear in the Integration Builder?.
Thanks in advance.
Tuan.Hi Tuan,
Are you using Business System or Business Component. If your using Business System you need to assign Software Component Version to Business System in SLD. If your using Business Component you have to add the Interface Name Manually to the Business Component. Please see the Below screen shot, you have to add Sender or Receiver Interface manually to proceed further step.
Thanks,
Satish. -
DEV- QAS : Obligatory transport target for business system not found
Hi guys!
I have read all the other threads about this subject, but since I still have no success, I´m feeling obligated to ask you for a help (deadline approaching fast!)
I´m trying to transport a Communication Channel, from DEV environment to QAS. I'm having the 'usual' error:
Import failed because of business system transfer of object Communication Channel * | SIGA | SOAP_SYNC_SENDER: Obligatory transport target for business system SIGA not found in System Landscape Directory
Here were my steps:
Keep in mind that in DEV, everything was up and running: Software Component, Product, Technical System and Business System for this name "SIGA".
1 - In DEV, I created a new Technical System, named "SIGA_QAS", pointing to my QAS server. (Keeping in mind I already had a "SIGA" pointing to my DEV server.)
2 - Still in DEV, I did create two groups: GROUP_DEV and GROUP_QAS, one points to INTEGRATION_SERVER_DX1 (DEV) and the other INTEGRATION_SERVER_QX1 (QAS).
3 - Still in DEV, I created the Business System called "SIGA_QAS" also, pointing to my QAS server.
4 - Still in DEV, I went inside both Business Systems and put: "SIGA_QAS" as TARGET BS of "SIGA" (which automatically puts "SIGA" as SOURCE BS of "SIGA_QAS")
If I look at my QAS SLD, I can see all of these objects already there, since my BASIS team did activate the 'sync' between these two environments. So, I dont need to create anything 'new' in my QAS SLD, all the objects are there, same as DEV SLD.
If I try to EXPORT/IMPORT a simple Communication Channel (using file system or even CTS - I tried both) I get the error mentioned above.
But this is 'wierd' for me, since the error says: "business system SIGA not found in System Landscape Directory", but it is there, in both SLDs.
Am I missing something here?
Thanks!
Ricardo Sancio Lóra
BrazilHi,
If you not tried this then try it. Delete the Business System SIGA from Integration Directory in your QAS system and then again import the business system from SLD. Acitvate the changes and then import the CC from Dev to QAS.
Regards,
Sarvesh
Maybe you are looking for
-
Vendor closing balances busienss area wise
Dear Guru's Please suggest me, i am executed this report S_ALR_87012082 vendor balance with local currency, i have given business area in dynemic selection, here my problem is - if i am given business area or if i am not given business area also
-
Is there any way to transfer photos, music from my PC to my new iPad(3)?
Is there any way to transfer photos, music, from my PC to my new iPad(3)?
-
Photoshop elements 11 download error
As soon as i type my country of residence and serial number in i receive a message saying that an error has occured with the download and that i must try again. please help. i have now retried a number of times without success. Thank you
-
Receiving messages from people not in my contacts list
Hello, For the past week I have been receiving messages/calls from people who are not in my contact list.My security settings clearly were set to only allow contacts from my list only to message and call me.Why is this happening?It's kind of annoying
-
Are there any versions of the portal that have native support for communications to Web Services? Is it going to be eventually possible to dynamically discover channels via a discovery method like UDDI?