Business system not in dev but in QA

Hi,
we have a scenario where ECC sends a message to PI which sends a web service request out to a provider.
We have a only 1 ECC system in DEV but 2 ECC systems in QA ... one for QA and 1 for training.
Now we want both ECC systems to be able to send messages to the same PI system in QA and PI has to route the request to the right web service provider. How can we configure this in DEV and transport if there is only 1 ECC system in DEV ?
Is there a way to create a virtual business system for training in DEV (I.E no technical system) and then configure with this system in DEV and then transport in QA where the real training system is... that is , the one which has a technical system.
Thanks.

Hi Thierry
For QA ECC 1
1) Export full SDL from DEV to QA.
2) Create T.S & B.S for QA ECC 1.
3) Create Tranport Group & provide Transport Target in QA SLD for Dev B.S.
This will automatically convert your dev B.S to QA B.S in Configuration .
4) Import all objects in IR & ID.
For QA ECC 2.
1) Create New Business system for Training ECC in QA SLD.
2) Since we can't give 2 trasport targets for 1 dev B.S, you have create a new configuration scenario and import your new B.S .
3) You have to do seperate configuration for sender B.S as your new B.S
4) your I.R objects will be same for both configuration.
Also Import the idoc metadata from both ECC in IDX2.
When an idoc is triggred from ECC1 or ECC2 in QA, it will use the same mapping and data will be transfered to Target system.
Regards
Abhijit

Similar Messages

SPROXSET ...Unable to rectify Business systems not found issue..

Hi,
On doing a test of my proxy I am frustrated with an error " Business system not found". I have maintained SPROXSET values as IFR_aDDRESS = XI.XYZ.COM, IFR_PORT = 51000, IFR_USER = PIAPPLUSER and IFR_PASSWORD = XIPASS.
I encounter this error whenever I do a test on SPROXY and I can't see the business systems from the SLD. What am I missing here? My sldcheck , sldapicust are all good. The only error in sldcheck is LCR_SAP_BUSINESS_SYSTEMS gives a retuen code fo 4. Please advise on what I am missing here.
Teresa

Check RFC destination
The below links may be useful
How do you activate ABAP Proxies?
How do you activate ABAP Proxies? - Activate Proxy
ABAP Server Proxies - ABAP Server Proxy
ABAP Proxies in XI(Client Proxy) - ABAP Client Proxy
BSP a Developer's Journal Part XIV - Consuming WebServices with ABAP
File to R/3 via ABAP Proxy - ABAP Proxy
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm

Business system not found in CPACache

Sceinario was working fine before XI system crash. After the system is reestablished the scenario not working. Giving RFC error "Service: SAPESRI not found in CPACache" in R3 system
CPAcache refreshed for dela as well as full
Adapter specific identifiers are fine
SLD cache cleared in IR ID
Business System name is found in CPAcache
error repeated
Business System deleted from SLD. New business system Created. Entire scenario reconstructed. All the above are also fine.
Still error is repeating.
Can anybody give a solution for this problem please?
Regards,
Venkat

Hi Venkat,
The subject of the problem & the problem explanation is varing i.e *Business system not found in CPACache*
However, the problem still lieing with SLD. So, test the SLD and activate the scenario. Also without refreshing CPA cache you will have to perform execution.
Regards
Pothana

DEV- QAS : Obligatory transport target for business system not found

Hi guys!
I have read all the other threads about this subject, but since I still have no success, I´m feeling obligated to ask you for a help (deadline approaching fast!)
I´m trying to transport a Communication Channel, from DEV environment to QAS. I'm having the 'usual' error:
Import failed because of business system transfer of object Communication Channel * | SIGA | SOAP_SYNC_SENDER: Obligatory transport target for business system SIGA not found in System Landscape Directory
Here were my steps:
Keep in mind that in DEV, everything was up and running: Software Component, Product, Technical System and Business System for this name "SIGA".
1 - In DEV, I created a new Technical System, named "SIGA_QAS", pointing to my QAS server. (Keeping in mind I already had a "SIGA" pointing to my DEV server.)
2 - Still in DEV, I did create two groups: GROUP_DEV and GROUP_QAS, one points to INTEGRATION_SERVER_DX1 (DEV) and the other INTEGRATION_SERVER_QX1 (QAS).
3 - Still in DEV, I created the Business System called "SIGA_QAS" also, pointing to my QAS server.
4 - Still in DEV, I went inside both Business Systems and put: "SIGA_QAS" as TARGET BS of "SIGA" (which automatically puts "SIGA" as SOURCE BS of "SIGA_QAS")
If I look at my QAS SLD, I can see all of these objects already there, since my BASIS team did activate the 'sync' between these two environments. So, I dont need to create anything 'new' in my QAS SLD, all the objects are there, same as DEV SLD.
If I try to EXPORT/IMPORT a simple Communication Channel (using file system or even CTS - I tried both) I get the error mentioned above.
But this is 'wierd' for me, since the error says: "business system SIGA not found in System Landscape Directory", but it is there, in both SLDs.
Am I missing something here?
Thanks!
Ricardo Sancio Lóra
Brazil

Hi,
If you not tried this then try it. Delete the Business System SIGA from Integration Directory in your QAS system and then again import the business system from SLD. Acitvate the changes and then import the CC from Dev to QAS.
Regards,
Sarvesh

Transport target for business system not found in System Landscape Director

Folks,
We have new installed new PI 7.1 system and importing interfaces from the OLD XI 3.0 system in to new PID 7.1 system.
We are getting following error when we try to import an interfaces in to new PID system:
Import failed because of business system transfer object
Communication component XID_FileSystem: Obligatory
transport target for business system XID_FileSystem not found in
System Landscape Directory
We are yet to install PIQ system.
All the interfaces in the old XID system have transport target of XIQ system. I removed the transport taget for the interface, but transport target is still showing in the Business system under transport target head.
How can we overcome this issue as we will not have PIQ system atleast for two weeks.
Thanks in advance,
Regards
Chandu

Hi,
You need to maintain Transport Groups and target for business systems while SLD transports between your XI system and PI 7.1
Illustrated with DEv & PRD here.
Procedure:
1) Call Integration Builder screen on DEV Server with http://hostname:J2ee Port/rep
2) Call SLD (System Landscape Directory) Component from the Integration builder
Save all the Following .zip files on the Local Desktop
3) Select the Software Component & say Export that you want to Export from DEV
Server to Production server and which is going to use in the IR of XI
4) Also Select the Product of the above SWC and say Export
5) Select the Technical Systems (TS of XI & TS of the SAP R/3) and say Export
6) Select the Business System(s) & say Export; those are associated with above Exported
Technical systems.
In Production Server
1) Logon to the SLD of the Production Server.
2) Create a Technical System and Business system which points to the Production SAP R/3
3) Go to Administration TAB in the main page of SLD
4) Select the Import option to Import the SWC , PRD, TS,& BS which we Exported Earlier in DEV Server
5) Click on Browse and select the .zip files that is to Import into Production Server,
Which were stored on the local desktop at the time of DEV Server Export
And say Import Selected File Option
By this we exported and imported the SLD Objects
Now we have to create transport groups and transport targets in the Production server of SLD
Creation of Transport Groups
Edit GroupsGroup1) Select the Business systems
2) Click on New Group and give the name of the group as DEV_group & select the
Corresponding Development serveru2019s integration Server
3) Similar way create another group for Production serveru2019s business system as
PRD_group and select the Production serveru2019s integration Server
Creation of transport targets
This is to Define which business systems in two different groups correspond to each other
1) Select each Business system in the SLD and select transport TAB---click on
Add/Change Target and select its corresponding target business system.
For Example:
If you select the business system of Production XI server means
In the target you have to select group as DEVGROUP and the business system of Development XI server.
Like this do the same for other business systems also
Ex:
BS_PRD_Integration Server----
BS_DEV_Inetration Server
How to create Transport Groups & transport Targets
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
Regards
Seshagiri

Obligatorytransport target for business system not found in SLD

Dears,
We implemented CTS+ in our PI three system landscape.
While implementation we configured local SLD and after that for dev and QAs we configured a central SLD.
And for Production we have seprate SLD.
In DEV SLD we have three buisness systems:
File_Dummy of type DEv
File_Dummy_Q of type QAS
File_Dummy_P of type PRD
Now in transport target group of File_Dummy I put File_Dummy_Q and in File_Dummy_Q I put File_Dummy_P but for BS File_Dummy_P target group is empty.
Now I put all these BS into a request and import them in QAS then I get error:
Obligatorytransport target for business system File_Dummy_P not found in System Landscape Directory
Now I am not getting what to put in transport target of File_Dummy_P as it is of type.
I tried to put their File_Dummy_P but we can not put PRD type BS there.
I also tried with dev and qas BS there but still same error.
Please suggest how to resolve this error.
Regards,
Shivam

Hi,
did you transported the associated technical systems of your business systems....?
Also I assume you have assoicated the targets foryour business systems in SDL..
like for D targets are Q and P
for Q source is D and Target is P
for P sources are D and Q... if not assoicate the same...
and also make sure the three groups are available for three environments...
HTH
Rajesh

Transport Error while transporting ID TR (Target Business System not found)

Hi Gurus,
We are facing a issue with transports while transporting a ID transport to Prod from QA.(We are using CTS+)
Its our first transport to PROD and we have checked the configuration for BC Application Server in Administration ->Content Maintenance and all looks good .
Our SLD is looks as below
We have shared SLD for Dev and QA and it looks as below
Dev's BS has target business system of QA BS
And in Prod Sld looks like as below
QA's BS has target business system of Prod BS
When we transport from Dev To QA transport works fine but when we transport from QA to Prod its gives below error and in error its points that target for Dev business system is not found in Target SLD.
We thought we should try to point Dev BS ====>>Prod BS may be that might work work but its also giving error same error.
Below mentioned is the Error
class java.rmi.RemoteException:
ClientServerException exception:Import failed because of business system transfer of object Service BS_ACN_MDH_DEV:Obligatory transport target for business system BS_ACN_MDH_DEV not found in System Landscape Directory
com.sap.aii.ib.core.transport.api.TransportCsException: Import failed because of business systemtransfer of object Service BS_ACN_MDH_DEV: Obligatory transport target for business system BS_ACN_MDH_DEV not found in System Landscape Directory
#at com.sap.aii.ibdir.server.transport.impl.postprocessing.TransportPostprocessor.postprocessTransport(TransportPostprocessor.java:741)
#at com.sap.aii.ibdir.server.transport.impl.postprocessing.DirImportPostprocessor.postprocess30Import(DirImportPostprocessor.java:62)
#at com.sap.aii.ibdir.server.transport.impl.postprocessing.InternalPostprocessingService.postprocess(InternalPostprocessingService.java:205)
#at com.sap.aii.ibdir.server.transport.impl.postprocessing.PostprocessingService.doPostprocessing(PostprocessingService.java:171)
#at com.sap.aii.ibdir.server.pvcadapt.XIDirPropagationProvider.transportFinished(XIDirPropagationProvider.java:90)
#at com.sap.aii.ib.server.transport.impl.pvc.PvcTransport.pvcImport(PvcTransport.java:107)
#atcom.sap.aii.ibdir.server.transport.impl.pvc.DirPvcTransport.pvcImport(DirPvcTransport.java:74)
#atcom.sap.aii.ibdir.server.transport.impl.service.InternalDirTransportServiceImpl.pvcImport(InternalDirTransportServiceImpl.java:142)
#at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importZippedStream(InternalTransportServiceImpl.java:721)
#at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importXiStream(InternalTransportServiceImpl.java:500)
#at com.sap.aii.ib.server.transport.impl.service.TransportServiceImpl.importXiStream(TransportServiceImpl.java:265)
#at com.sap.aii.ib.server.transport.impl.hmi.CmsHmiMethods.process(CmsHmiMethods.java:306)
#at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:169)
#atcom.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.java:178)
#at com.sap.aii.utilxi.hmis.sbeans.HmisBeanImpl.process(HmisBeanImpl.java:86)
#at com.sap.aii.utilxi.hmis.sbeans.HmisLocalLocalObjectImpl1_0.process(HmisLocalLocalObjectImpl1_0.java:144)
#at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:290)
#at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:211)
#at com.sap.aii.utilxi.hmis.web.workers.HmisInternalClient.doWork(HmisInternalClient.java:70)
#at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletImpl.java:496)
Can you guys please help out in resolving this error.
Thanks in Advance.

Hi,
I assume you have two SLDs(SLD1 - for Dev and QA , SLD2 - for Prod) and PI 7.0 or XI 3.0.
In this case the ideal solution would be to
1. set up a SLD bridge between your Dev/QA SLD and Prod SLD. The bridge basically forwards all the Technical system SLD info to Prod. SLD.
2. Import Dev business systems information into Prod.
3. Then create transport target,
Make sure that you have created Business Groups for Dev/QA/Prod properly
Edited by: Nageshwar Reddy on Mar 17, 2009 8:29 AM

Business Systems not appearing in the Integration Builder (Configuration)

Hi Experts,
I have created new business systems in the Integration Builder of my PI System.
This is not appearing in the Integration Builder.
I executed the delta cache in transcation SXI_CACHE but the issue is same. Please let me know what should I do to get the business systems.
Thank you.
Thanks
Kasee

Business system from SLD not visible in Integration Directory

SLD Business system not appearinn in Integration Directory Configuration

Hello,
I have configured a business system in SLD(defined a Technical system,assigned it to a business system),but when i go to
Integration directory and assign a business system without a partner,I am not able to see this business system.
can any one please help.
regards
kaushik

environment -> clear SLD cache

Business system not known to SRM

Hi,
We are able to send and xml PO to SRM server, but we are getting ABAP Application error in the pipeline service of the IE of SRM.
In SXMB_MONI in SRM:
Under Trace:
<CONTROLLER />
<FAULT_TEXT>An error occured within an XI interface: SLD system QA2_220 is not known Programm: SAPLBBP_BD_MAPPING_SAPXML1; Include: LBBP_BD_MAPPING_SAPXML1F1Y; Line: 92</FAULT_TEXT>
<FAULT_URL />
<FAULT_DETAIL />
Under Error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="http://sap.com/xi/SRM/Basis/Global">StandardMessageFault</SAP:ApplicationFaultMessage>
<SAP:Stack>The application triggered an exception</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
QA2_220 is defined in the XI SLD, and it is the sender service. I am not sure why it is saying "QA2_220 is not a known programm." Does anyone know why we are getting this error?
Any help is appreciated.
Thanks,
Karma

You need to associate the Logical System in SRM with the SLD Business System.
This is how to do it.
In the SRM system, go to the IMG through SPRO:
Goto SAP Implementation Guide->Supplier Relationship Management->SRM Server->Technical Basic Settings->Define Backend Systems
You should have the logical systems defined there. Scroll to the right and add the SLD Business system name under the "System Landscape Directory Name"
This should do it. Now when SRM tries to process the message from the Business system, it will look up the corresponding logical system from this entry.
Regards,
Jay

Business system not seen

Hi all,
I am working on a JDBC-XI-Idoc scenario.
I have created a business system and a technical system. I have also completed all my design in the repository.
When i try to create a new object in the Directory, it is asking for the business system. But the business system which i had created in the SLD is not seen in the list of business systems which is getting displayed.
Can anybody help me in this?
Thanks in advance,
Divija.

Hi,
you need to assign the business system first
1. you can do it in the directory - open business systems without party and right click and <b>assign business system</b>
2.if you won't see your business system there
refresh sld first (from the manu in directory)
and repeat the step 1.
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Replication Business Systems not availble for Replication

Hi All,
We configured MDG 7 F workflows for all objects.
When We try Replication by Objection Selection option. ( Search GL Account--> Select Record --> Click on Replicate Button) , We are not getting target business sytem to select for the replication. This problem is occuring all finance objects like GL,Cost Center,Profit Center,Item,Company etc..
But, When we try Data Replication --> Replication by Objects option / Data Replication --> Replication by Replication Model options, We can see target business systems and able to replicate successfully.

Hi,
It happens sometimes due to Meta Data Issue,
Go for SLD Cache :
To clear the SLD cache, from the Integration Builder main menu, choose Environment ® Delete Cache for SLD Data.
Once we have deleted the cache for SLD data, accessing objects in the SLD may take longer than usual initially.
Still If you are not able to see the Business System when trying to import the business system. Go to Objects tab in ID --> Business System and you will find the imported Business System --> Right Click and ADD to Scenario.
Regards
Agasthuri Doss

Interface on Business System not found

Hi,
I have the following scenario:
RFC --> XI --> Webservcie
I import the RFC interface and use it directly as interface.
At the development system it work's fine productively it doesn't work.
Has anybody a hint for me?
PS: I compared all.
Regards Johann

Johann,
check the Dev Technical System in SLD. See all the Products that are installed in it.
Then, go for the Dev Business System in that Technical System, and check which SWCV you have for the installed products.
One of these SWCV is the one that contains the imported RFC that you uses in your integration. You need to add this SWCV to Prod Business System for the interface to be available in Integration Directory. Check what is the Product which contains this SWCV.
Now, for the Prod Technical System, check if it has the Product which contains the SWCV you need. If not, add the Product to that Technical System. Then, go for the Prod Business System, mark the newly added Product and select the SWCV you need. Make sure to save the modifications.
That's all. You should be able to see the interface in Integration Directory (if it was properly transported into Integration Repository).
Regards,
Henrique.

My business system not visible

Hi all,
I created one business system using 3rd pary when I
am going to assign in "Integration Directory" it is not
coming in list. Then when I am trying to create the BS
in SLD with same name and Logical system then it is
showing "Already exits". But in SLD also not
visible...??? What will be reason. How to get my BS in
ID?
regards,
Khaja.

Hi,
It is not added in any other scenarios. When I done "Cache Notification" then I am getting this Error
"com.sap.aii.ib.server.abapcache.CacheRefreshException:
Unable to find an associated SLD element (source
element: SAP_XIIntegrationServer, [CreationClassName,
SAP_XIIntegrationServer, string, Name, is.01.apollo,
string], target element type: SAP_BusinessSystem)
Regards,
Khaja.

Business systems not showing in I.D( Integration Directory)

Hi Guys,
I Completed the Configuration up to I.R( Integration Repository). in integration Directory i created a scenario. under Service without party when i am trying to assign Business systems. it is not showing any Business Systems. i already Created Business systems in S.L.D. any body have any idea why it is Happing. Thanks in advance.
Thanks
Kiran.B

Go to Objects tab and find your Buss. System. Right click on this and select add to scenario. Buss. system should be imported into ID only once.
If you cant find your Buss system in ID, then use the menu Environment --> Clear SLD data Cache.
Regards,
Jai Shankar

Business system not in dev but in QA

Similar Messages

Maybe you are looking for