Business system not seen

Hi all,
I am working on a JDBC-XI-Idoc scenario.
I have created a business system and a technical system. I have also completed all my design in the repository.
When i try to create a new object in the Directory, it is asking for the business system. But the business system which i had created in the SLD is not seen in the list of business systems which is getting displayed.
Can anybody help me in this?
Thanks in advance,
Divija.

Hi,
you need to assign the business system first
1. you can do it in the directory - open business systems without party and right click and assign business system
2.if you won't see your business system there
refresh sld first (from the manu in directory)
and repeat the step 1.
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Similar Messages

SPROXSET ...Unable to rectify Business systems not found issue..

Hi,
On doing a test of my proxy I am frustrated with an error " Business system not found". I have maintained SPROXSET values as IFR_aDDRESS = XI.XYZ.COM, IFR_PORT = 51000, IFR_USER = PIAPPLUSER and IFR_PASSWORD = XIPASS.
I encounter this error whenever I do a test on SPROXY and I can't see the business systems from the SLD. What am I missing here? My sldcheck , sldapicust are all good. The only error in sldcheck is LCR_SAP_BUSINESS_SYSTEMS gives a retuen code fo 4. Please advise on what I am missing here.
Teresa

Check RFC destination
The below links may be useful
How do you activate ABAP Proxies?
How do you activate ABAP Proxies? - Activate Proxy
ABAP Server Proxies - ABAP Server Proxy
ABAP Proxies in XI(Client Proxy) - ABAP Client Proxy
BSP a Developer's Journal Part XIV - Consuming WebServices with ABAP
File to R/3 via ABAP Proxy - ABAP Proxy
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm

Business system not found in CPACache

Sceinario was working fine before XI system crash. After the system is reestablished the scenario not working. Giving RFC error "Service: SAPESRI not found in CPACache" in R3 system
CPAcache refreshed for dela as well as full
Adapter specific identifiers are fine
SLD cache cleared in IR ID
Business System name is found in CPAcache
error repeated
Business System deleted from SLD. New business system Created. Entire scenario reconstructed. All the above are also fine.
Still error is repeating.
Can anybody give a solution for this problem please?
Regards,
Venkat

Hi Venkat,
The subject of the problem & the problem explanation is varing i.e *Business system not found in CPACache*
However, the problem still lieing with SLD. So, test the SLD and activate the scenario. Also without refreshing CPA cache you will have to perform execution.
Regards
Pothana

Business Systems not appearing in the Integration Builder (Configuration)

Hi Experts,
I have created new business systems in the Integration Builder of my PI System.
This is not appearing in the Integration Builder.
I executed the delta cache in transcation SXI_CACHE but the issue is same. Please let me know what should I do to get the business systems.
Thank you.
Thanks
Kasee

Business system from SLD not visible in Integration Directory

Business systems not showing in I.D( Integration Directory)

Hi Guys,
I Completed the Configuration up to I.R( Integration Repository). in integration Directory i created a scenario. under Service without party when i am trying to assign Business systems. it is not showing any Business Systems. i already Created Business systems in S.L.D. any body have any idea why it is Happing. Thanks in advance.
Thanks
Kiran.B

Go to Objects tab and find your Buss. System. Right click on this and select add to scenario. Buss. system should be imported into ID only once.
If you cant find your Buss system in ID, then use the menu Environment --> Clear SLD data Cache.
Regards,
Jai Shankar

SLD Business system not appearinn in Integration Directory Configuration

Hello,
I have configured a business system in SLD(defined a Technical system,assigned it to a business system),but when i go to
Integration directory and assign a business system without a partner,I am not able to see this business system.
can any one please help.
regards
kaushik

environment -> clear SLD cache

Business System not reflecting the XI Content for SRM

Hi,
We are currently working on the SUS-MM scenario.
The landscape includes PI 7.11, SRM 7.0 and R/3 4.6C. SLD Communication is working fine between these systems.
Integration Builder has SRM Server 7.0 and SRM Server IC 7.0 imported.
The current status:
We can successfully transfer vendors from SAP R/3 to SUS
We cannot transfer transaction data from SAP R/3 to SUS, e.g. purchase orders etc
Our Main Issue:
The Business System INTEGRATION_SERVER_<SID> is imported into the Integration Builder from the SLD.
On the Display communication component screen, the receiver and Sender tabs are not showing any of the SRM Server or IC components that have been imported into the ESR. However is displaying only the BASIS components that was imported during inital install.
Because of this, we are not able to proceed with the configuration though the interfaces being available in the ESR. We are not sure what is that we are missing that is preventing the XI content for SRM from being displayed. Also, the PI business system in the SLD has the SRM Content listed under the installed products list.
Any help would be appreciated.
Thanks
Venkat.

Hello,
do you have a solution? I'm facing the same issue.
Regards,
Sven

Model Configurator - Business System not listed

Hello,
I have the following problem when using the model configurator to create a configuration scenario based on an integration scenario.
I want to assign a communication component to a product. However the according communication component is not listed in the value list for a specific product.
I have added the product to the business system (installed) in the SLD and also cleared the SLD cache. However the communication component is still not listed.
Any idea what else I could try?

Hi, I have the same issue. How did you make it show up in the value list? The input box on Model Configurator won't simply let you type it in.

Transport target for business system not found in System Landscape Director

Folks,
We have new installed new PI 7.1 system and importing interfaces from the OLD XI 3.0 system in to new PID 7.1 system.
We are getting following error when we try to import an interfaces in to new PID system:
Import failed because of business system transfer object
Communication component XID_FileSystem: Obligatory
transport target for business system XID_FileSystem not found in
System Landscape Directory
We are yet to install PIQ system.
All the interfaces in the old XID system have transport target of XIQ system. I removed the transport taget for the interface, but transport target is still showing in the Business system under transport target head.
How can we overcome this issue as we will not have PIQ system atleast for two weeks.
Thanks in advance,
Regards
Chandu

Hi,
You need to maintain Transport Groups and target for business systems while SLD transports between your XI system and PI 7.1
Illustrated with DEv & PRD here.
Procedure:
1) Call Integration Builder screen on DEV Server with http://hostname:J2ee Port/rep
2) Call SLD (System Landscape Directory) Component from the Integration builder
Save all the Following .zip files on the Local Desktop
3) Select the Software Component & say Export that you want to Export from DEV
Server to Production server and which is going to use in the IR of XI
4) Also Select the Product of the above SWC and say Export
5) Select the Technical Systems (TS of XI & TS of the SAP R/3) and say Export
6) Select the Business System(s) & say Export; those are associated with above Exported
Technical systems.
In Production Server
1) Logon to the SLD of the Production Server.
2) Create a Technical System and Business system which points to the Production SAP R/3
3) Go to Administration TAB in the main page of SLD
4) Select the Import option to Import the SWC , PRD, TS,& BS which we Exported Earlier in DEV Server
5) Click on Browse and select the .zip files that is to Import into Production Server,
Which were stored on the local desktop at the time of DEV Server Export
And say Import Selected File Option
By this we exported and imported the SLD Objects
Now we have to create transport groups and transport targets in the Production server of SLD
Creation of Transport Groups
Edit GroupsGroup1) Select the Business systems
2) Click on New Group and give the name of the group as DEV_group & select the
Corresponding Development serveru2019s integration Server
3) Similar way create another group for Production serveru2019s business system as
PRD_group and select the Production serveru2019s integration Server
Creation of transport targets
This is to Define which business systems in two different groups correspond to each other
1) Select each Business system in the SLD and select transport TAB---click on
Add/Change Target and select its corresponding target business system.
For Example:
If you select the business system of Production XI server means
In the target you have to select group as DEVGROUP and the business system of Development XI server.
Like this do the same for other business systems also
Ex:
BS_PRD_Integration Server----
BS_DEV_Inetration Server
How to create Transport Groups & transport Targets
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
Regards
Seshagiri

Business System Not coming up in configuration

Hi All,
I am new to SAP XI.
I was trying to create a scenario for transfering the data from IDOC on to an flat file.The business system which I created in SLD is not coming up while assigning the same in the configuration part.
I had the following doubts:
1.When the IDOC is send from the ECC system the business system needs to be configured to ECC,right?
2.If the above statement is true, can you please suggest the reason why it is not coming up in the configuration part?Is there any way to find what the reason would be?
Regards,
Rupesh.

Hi,
Business system needs to be created in XI SLD.
You have to done following configuration for Idoc scenario:
- Sender system:
SALE (define logical system, model configuration etc) /people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
- XI system
SM59 RFC destination for sender system
IDX1/IDX2 port and metadata.
business system configuration on XI SLD
Regards,
Gourav
Reward points if it helps you

Business system not known to SRM

Hi,
We are able to send and xml PO to SRM server, but we are getting ABAP Application error in the pipeline service of the IE of SRM.
In SXMB_MONI in SRM:
Under Trace:
<CONTROLLER />
<FAULT_TEXT>An error occured within an XI interface: SLD system QA2_220 is not known Programm: SAPLBBP_BD_MAPPING_SAPXML1; Include: LBBP_BD_MAPPING_SAPXML1F1Y; Line: 92</FAULT_TEXT>
<FAULT_URL />
<FAULT_DETAIL />
Under Error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="http://sap.com/xi/SRM/Basis/Global">StandardMessageFault</SAP:ApplicationFaultMessage>
<SAP:Stack>The application triggered an exception</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
QA2_220 is defined in the XI SLD, and it is the sender service. I am not sure why it is saying "QA2_220 is not a known programm." Does anyone know why we are getting this error?
Any help is appreciated.
Thanks,
Karma

You need to associate the Logical System in SRM with the SLD Business System.
This is how to do it.
In the SRM system, go to the IMG through SPRO:
Goto SAP Implementation Guide->Supplier Relationship Management->SRM Server->Technical Basic Settings->Define Backend Systems
You should have the logical systems defined there. Scroll to the right and add the SLD Business system name under the "System Landscape Directory Name"
This should do it. Now when SRM tries to process the message from the Business system, it will look up the corresponding logical system from this entry.
Regards,
Jay

Business system not found

What actions should you take if your Business System does not show when attempting to "Transfer from the SLD"?

Hi,
The Following things u have to check
1) Check Whether that BS is already is Assigned to Another Scenario
2) If it is Assigned to another scenario means, goto Objects TAB -
Expand Service With out Party
Business sysemRight click---Add to scenario( Select ur scenario)
Thie will adds the BS to your scenario also
3) Do SLD Cache through Envoronment----SLD Cache
The Process to Assign the BS
1) Expand Your Config Scenario--Service Without Party-Business SystemRight clickAssign
2) Say Continue-Say Continue Select ur BS
3) Un check the Check Box Bottom of the Window
REgards
Seshagiri

DEV- QAS : Obligatory transport target for business system not found

Hi guys!
I have read all the other threads about this subject, but since I still have no success, I´m feeling obligated to ask you for a help (deadline approaching fast!)
I´m trying to transport a Communication Channel, from DEV environment to QAS. I'm having the 'usual' error:
Import failed because of business system transfer of object Communication Channel * | SIGA | SOAP_SYNC_SENDER: Obligatory transport target for business system SIGA not found in System Landscape Directory
Here were my steps:
Keep in mind that in DEV, everything was up and running: Software Component, Product, Technical System and Business System for this name "SIGA".
1 - In DEV, I created a new Technical System, named "SIGA_QAS", pointing to my QAS server. (Keeping in mind I already had a "SIGA" pointing to my DEV server.)
2 - Still in DEV, I did create two groups: GROUP_DEV and GROUP_QAS, one points to INTEGRATION_SERVER_DX1 (DEV) and the other INTEGRATION_SERVER_QX1 (QAS).
3 - Still in DEV, I created the Business System called "SIGA_QAS" also, pointing to my QAS server.
4 - Still in DEV, I went inside both Business Systems and put: "SIGA_QAS" as TARGET BS of "SIGA" (which automatically puts "SIGA" as SOURCE BS of "SIGA_QAS")
If I look at my QAS SLD, I can see all of these objects already there, since my BASIS team did activate the 'sync' between these two environments. So, I dont need to create anything 'new' in my QAS SLD, all the objects are there, same as DEV SLD.
If I try to EXPORT/IMPORT a simple Communication Channel (using file system or even CTS - I tried both) I get the error mentioned above.
But this is 'wierd' for me, since the error says: "business system SIGA not found in System Landscape Directory", but it is there, in both SLDs.
Am I missing something here?
Thanks!
Ricardo Sancio Lóra
Brazil

Hi,
If you not tried this then try it. Delete the Business System SIGA from Integration Directory in your QAS system and then again import the business system from SLD. Acitvate the changes and then import the CC from Dev to QAS.
Regards,
Sarvesh

Replication Business Systems not availble for Replication

Hi All,
We configured MDG 7 F workflows for all objects.
When We try Replication by Objection Selection option. ( Search GL Account--> Select Record --> Click on Replicate Button) , We are not getting target business sytem to select for the replication. This problem is occuring all finance objects like GL,Cost Center,Profit Center,Item,Company etc..
But, When we try Data Replication --> Replication by Objects option / Data Replication --> Replication by Replication Model options, We can see target business systems and able to replicate successfully.

Hi,
It happens sometimes due to Meta Data Issue,
Go for SLD Cache :
To clear the SLD cache, from the Integration Builder main menu, choose Environment ® Delete Cache for SLD Data.
Once we have deleted the cache for SLD data, accessing objects in the SLD may take longer than usual initially.
Still If you are not able to see the Business System when trying to import the business system. Go to Objects tab in ID --> Business System and you will find the imported Business System --> Right Click and ADD to Scenario.
Regards
Agasthuri Doss

Obligatorytransport target for business system not found in SLD

Dears,
We implemented CTS+ in our PI three system landscape.
While implementation we configured local SLD and after that for dev and QAs we configured a central SLD.
And for Production we have seprate SLD.
In DEV SLD we have three buisness systems:
File_Dummy of type DEv
File_Dummy_Q of type QAS
File_Dummy_P of type PRD
Now in transport target group of File_Dummy I put File_Dummy_Q and in File_Dummy_Q I put File_Dummy_P but for BS File_Dummy_P target group is empty.
Now I put all these BS into a request and import them in QAS then I get error:
Obligatorytransport target for business system File_Dummy_P not found in System Landscape Directory
Now I am not getting what to put in transport target of File_Dummy_P as it is of type.
I tried to put their File_Dummy_P but we can not put PRD type BS there.
I also tried with dev and qas BS there but still same error.
Please suggest how to resolve this error.
Regards,
Shivam

Hi,
did you transported the associated technical systems of your business systems....?
Also I assume you have assoicated the targets foryour business systems in SDL..
like for D targets are Q and P
for Q source is D and Target is P
for P sources are D and Q... if not assoicate the same...
and also make sure the three groups are available for three environments...
HTH
Rajesh

Business system not seen

Similar Messages

Maybe you are looking for