Business System or Business Service for ORACLE system

Hi all
We are creating a configuration scenario which includes a oracle database as receiver .Please clarify me whether to create a Business System or Business Service for the oracle system.
Full Points will be awarded
Thanks and Regards
Uday

Hi,
We use Business system when we know the SLD Details(PRD,SWCV & TS)
We will use Business Service when we dont know the SLD details and we know Partially
We can create the Business system in SLD
We can create the Business service in ID itself
Difference between Business System and Business Service
So Decide your self now to create the Business system OR Business Service
REgards
Seshagiri

Similar Messages

ATP Check Issue - No business system could be determined for logical system

Dear all
Got an issue while executing ATP check on a planned order in product view,
with a message: "No business system could be determined for logical system"
CIF setting wise:
regular business system group maintained and assigned in place,
master data wise:
business system group info fine in product master,
Is there anywhere suggested to check under ATP setting:
category, check mode, business event, check control/check instruction?
Your kindest enlighting is appreciated,
Thank you,
mandy

Dear Mandy,
usually this error is caused by a missing customizing entry:
spro:
Integration with SAP Components
   Integration via APO Core Interface (CIF)
     Basic Settings for Creating the System Landscape
       - Maintain Business System Group
       - Assign Logical System and Queue Type :
Please read the documentation for these two transactions and create the systems.
You need to specifiy there all systems that are in your BSG. The documentation for the customizing of 'name logical system' in APO says:
To enable the transfer of data between SAP R/3 and SAP APO, you need to name both the SAP APO system in which you are working and the SAP R/3 system to which you want to transfer data as logical systems.
I hope this helps.
Regards,
Tibor

Can i use technical system type 'third party' for r3 system in idoc2file sc

Hi,
i am doing a sample out bound scenario (idoc 2 file), distributing idoc from sap system to csv file (in same network). in this can i use thchnical system type 'third party' for R3 system. will the scenario work properly or not.
And some times some of the business systems in SLD are not visible in ID, when assigning business system in ID.can any one tell reason for this.
can any one suggest me,........ Thanks in advance & would be appreciated.
Regards
Rajesh

Hi,
<i> can i use thchnical system type 'third party' for R3 system. will the scenario work properly or not.</i>
--- No u can't use this...Ur technical system must be "WebAS ABAP" only. For file system you use 3rd party system. means ur technical system like follows.
sender
R/3 -- WebAs ABAP
Receiver
File - 3 rd pary system
<i>And some times some of the business systems in SLD are not visible in ID, when assigning business system in ID.can any one tell reason for this.</i>
Click "Clear SLD cache" repeatly for some time in ID, it will come.
regards,
Ansar.

Is it possible to build a project with Labview 2010 on a Windows XP system, that is useful for a system with windows 7 on it?

Hi there,
I am planning to use Labview 2010 in a short time.
But before I'm going to use it I have some questions.
I know it is possible to run Labview 2010 in an XP environment. But is it also possible to, when running Labview 2010 on a XP system, to build a project to a version that is useful in a Windows 7 environment?
Or do I have to run Labview 2010, when I want to build a project that is useful on a Windows 7 system, on a system with Windows 7?
Please give me some information.
I hope to hear from one of you soon.
Regards,
Kenny
Solved!
Go to Solution.

Is it possible to build a project with Labview 2009 on a Windows XP system, that is useful for a system with windows 7 on it?
Thanks.
Philippe B.
Certified Associate Developer / Dépt Moyens d'essais
www.ingenia-system.com

Configuring Web Services for Oracle XML DB

Hi all...
I think I need some help one this subject....
We have a 10G Release 2 Oracle single instance ( not RAC) install on a Linux Redhat v5.3 64 bit server. Are developers are user Visual Studio .Net and wnat to send xml files to a web service so that the xml file (containing data) can call a PL/SQL package (to be written) which will take the data out of the xml input file and insert rows into a prefined table within the instance. Now they have browsed the web and have come upon the following links...
http://docs.oracle.com/cd/B28359_01/appdev.111/b28369/xdb_web_services.htm
http://docs.oracle.com/cd/B28359_01/appdev.111/b28369/xdb22pro.htm#i1026724
Currently, within the database I looked at the schema XDB and have unlocked the account and connected as the user XDB. There are some 680 objects in the following groups...
SQL> select object_type, count(*) from dba_objects where owner='XDB' group by object_type;
OBJECT_TYPE COUNT(*)
SEQUENCE 2
PROCEDURE 5
OPERATOR 8
LOB 334
LIBRARY 12
PACKAGE 20
PACKAGE BODY 17
XML SCHEMA 25
TYPE BODY 5
TRIGGER 12
TABLE 36
INDEX 51
FUNCTION 5
INDEXTYPE 2
VIEW 2
TYPE 144
16 rows selected.
Now in the links above it mentions that the xdbconfig.xml needs to be altered etc. However, I have searched the entire $ORACLE_HOME and there is no file definition of that description.
From a DBA prospective...what do I have to install on the Linux server? I assume from the Oracle Database 10g Companion Products I need to lay down Oracle HTTP Server in a new Oracle home as the first step...or not? Does the HTML DB need to be installed as well?
And for Configuring Web Services for Oracle XML DB...what else has to be installed? And from what product line?
Thanks in Advance....
Cheers
Roegr

Hi Marco...
First of all ...thanks for the reply.
I followed the link and the infor in that web page. However, there were a few things that did not work....
1. The http://localhost:8080/ as is brought up a web page withe the heading as
==========
ORACLE DATABASE 10g EXPRESS EDITION LICENSE AGREEMENT..
==========
The other browser test ftp://localhost:2100/
did not find any page?
2. Then I went onto running (as the sysdba) the pl/sql to enable the ORAWSV Entry Service
however it error out. So I did a describe on DBMS_XDB and the function deleteServlet does not appear
then I had a look and this link to > http://www.liberidu.com/blog/?p=471
was for 11G and the other link > http://docs.oracle.com/cd/B28359_01/appdev.111/b28369.pdf
was for 11G.
However, we are on 10G
=================
SQL> select * from V$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for Linux: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
==================
So is there must be other sql for 10G?
Cheers
Rog

Idoc adapter - No service for a system in Integration directory

Hi,
I'm trying to send a custom IDOC from an R3 system to an XI instance.
All settings that I can see using transactions IDX1 IDX2 and IDX5 seems to be correct, but the IDOC doesn't reach the IS.
SM58 in the sender system reports the error:
"No service for system SAPXXX, client nnn in Integration Directory".
Do I have to create the service? How?
Thanks for any suggestion.
Simona

Hi Simona,
you have to create the service. Create first the technical system and the business system in the SLD. Look for the right "Logical System" (Transation SALE in R3).
In the Integration Builder Directory go to "Environment/Clear SLD Data" and create the service by "Objects/Service without party/Business System/Assign Business System".
Regards, Udo

How to create a service for Oracle HTTP Server

Hi,
I hope someone can help me.
I would like to create a service for an Oracle HTTP Server.
We are running APEX 3.2 on an 10.2.0.4 database (not XE).
We have a Windows XP system.
To run APEX on a 10g we need the HTTP Server.
Unfortunately no service was created while the installing of the Oracle HTTP Server.
How can I create a service later. After the installation.
I know that you can create a service with Instrsrv.exe and Srvany.exe. But I dont know wheather I can use this in this case.
I need an .exe file for that.
The HTTP-Server has the opmnctl.exe.
But I have to write opmnctl.exe startall when I start or opmnctl.exe stopall when I want to stop it . How can I realize that in a Service?
Thanks for your answer
Jens

Hi,
I hope someone can help me.
I would like to create a service for an Oracle HTTP Server.
We are running APEX 3.2 on an 10.2.0.4 database (not XE).
We have a Windows XP system.
To run APEX on a 10g we need the HTTP Server.
Unfortunately no service was created while the installing of the Oracle HTTP Server.
How can I create a service later. After the installation.
I know that you can create a service with Instrsrv.exe and Srvany.exe. But I dont know wheather I can use this in this case.
I need an .exe file for that.
The HTTP-Server has the opmnctl.exe.
But I have to write opmnctl.exe startall when I start or opmnctl.exe stopall when I want to stop it . How can I realize that in a Service?
Thanks for your answer
Jens

Web Services for Oracle 8i

Is there any means for the Oracle 8i Platform to implement a Webservice to
access Business Logic in stored precedures?
We were evaluating IONA's XML Collaboration Suite and their Oracle Adaptor
but we are not satisfied with the level of control the adaptor provides.
Do you have any suggestions?
Best regards,
Andreas

Yes, you can publish stored procedures as Web services. Two approaches:
1. Check out the new Web services sample that came out the other day, example two where SQLJ is used to wrap a Java class as a stored procedure, the connection is then wired into the generated class and finally it is published as a Java Web service using Oracle9i JDeveloper 9.0.2. See:
http://otn.oracle.com/sample_code/tech/java/web_services/
and look at the Tax Calculator viewlet/code.
2. This is essentially the same way that the OC4J PL/SQL Web service samples work too (using SQLJ to generate a Java PL/SQL proxy), but the OC4J sample (url below), provides a more parametric way to pass the connection information to the proxy by using a parameter in the web.xml file. Check out:
http://download.oracle.com/otn/java/oc4j/how-to-web-services.zip
See the readme and work with the sample in plsqlws.zip
This one is a both better and worse from a developers perspective compared to the first Oracle9i Jdeveloper oriented example. The good part, depending on your perspective, is that it is all command line based (some people like this, some people don't) and uses the longer term approach to publishing stored procedures as Web services for Oracle9iAS with the parameters passed in via the web.xml. The bad part is the example is a little hard to follow because many of the pieces are already created for you rather than explaining how they were created. The first example at least shows pretty much all the steps but doesn't quite elegantly solve the connection problem that the OC4J sample does.
In July/August, Oracle9i JDeveloper will be updated to publish stored procedures using the Oracle9iAS infrastructure (basically the web.xml fix) ... although once you understand it, it is fairly easy to manually do it inside of JDeveloper.
Hope this gets you going.
Mike.

Can Central System administration be configured for JAVA systems?

I know, we can configure Central system administration (DSWP -> Solution -> Operations Setup) for ABAP and ABAP+JAVA systems.
Can some one tell me, can it be configured for JAVA systems like Portal?
Thanks
Aditya

Hello Aditya
Unfortunatelly Java only systems are not supported by CSA in EHP1. The CSA infrastructure is currently being overhauled and as a result of this, pure Java systems will also be covered starting with the next release of SAP Solution MAnager (SAP Solution Manager 7.1) The availability of this next release will be this year, but I am not yet sure when exactly. You can check further info in www.service.sap.com/solutionmanager -> in the last line of this page there is a link to get detail about this version Ramp-Up.

HP Blade System Enclosure Monitor Service hanging the system

Hello,
I noticed check the Memory usage on the RMS server
HPBladeSystemEnclosureMonitorService is using 26 GB RAM is it usual? should it be externalized?
it seems to take too much but not sure the needs.
HP BladeSystem Enclosure Monitor Service for HP c-Class BladeSystem Enclosures
SCOM 2007 R2 - 24 Enclosures
Thanks,
Dom
System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

This is the Service Manager forum. Looks like you are asking a SCOM question. SO head over to the SCOM forums instead. SCOM
Cheers,
Thomas Strömberg
System Center Specialist
Blog:
Twitter: LinkedIn:
Please remember to 'Propose as answer' if you find a reply helpful

Maximum number of services for Oracle 12c

can someone please give me a hint where I can find the limitations for number of services on Oracle 12c?
In the reference guide I found: maximum number of services per instance = 115
But that cannot be true because you can have up to 252 pluggable databases per database and each one is associated with a dedicated service.
If done some trials and currently I'm at 556 services. But I cannot find a document with the exact maximum.

Hi Friend,
Two Types containers are available in Oracle Database 12c
1. The ROOT container - - > This is first container and mandatory container.
2. Pluggable Database Container - - - > This is the container for application
So, Limit is - - > 253 PDBs in a One Container Database (CDB) it includes the SEED also and Services are 512 in a Container Database (CDB).
Check the following query to know the number of services
Select name, pdb from cdb_services;
Hope it helps...
Thanks
LaserSoft

Missing windows service for Oracle Enterprise manager

I have installed Oracle database 10G R1 (without seed database), and applied patchset 10.1.0.4. I have used the DBCA to create a database instance, which was created successfully (see note1).
However the windows service for the OEM DBconsole has not been created. I have tried to lookup the manuals how I can manually create this, but with no success. Please can somebody point out the correct procedure?
Best regards,
Jesmond
Note1:
If using DBCA the optional example schema are selected and saved to scripts, the calling script <ORACLE_SID>.sql must be amended to move the line below to the last entry:
@E:\oracle\product\10.1.0\admin\ebuscon\scripts\sampleSchema.sql
This is due to the fact that the sample schema script has an "EXIT" statement which will cause the creation script to terminate prematurely.

I think you have a similar problem as described in
Problem starting EM 10g
emca did not run, on Windows it also creates the corresponding service.

Generate sample CFC Service for Oracle 11g problem

Hello,
i am facing problem with Generating cfc from RDS datasource for oracle database 11g , i can borows the tables and fields
in the RDS Dataview but i cant Generate the CFC using the option of Generate from RDS datasoures , if i chose it it takes long time
and the flash builder is frazed and not responding if i try to select the table wich i want to create that CFC for . i have the correct
Oracle jdbc driver for that database version and also if i generate from template and try to create the return datatype it dosent
give me the correct datatype of the oracle table .. please help
thanks

The main problem that i am not able to select the table from the table lists to start generate the CFC
No there is no database objects in oracle starts with numbers , but most of thim having the ($) charactier in there names , i am not getting the correct datatypes , the num
bers datatype in oracle is presenting with Object datatype in flex .
i mean if you have a field with Number(6.2) in oracle the flash builder use Object datatype
and i am using the latest nightbuild of flash builder do i have to download something else ?

Importing Business Package more than once for different systems

Hi,
We have a demo portal (EP6 SP12) connecting to various SAP systems. We want to use the same Business Package for two different systems. Is there any way to import a Business Package a second time with a different system alias, without overwriting the first import, so we can point it to a different system?
Many thanks,
Jane

Prakash - I had thought of this, but I would then have to recreate the pages, worksets and roles manually. Also some BPs contain hundreds of iviews so it would be very time consuming to manually edit the system alias on each one.
Karsten - At the moment, we're interested in the ESS and MSS Business Packages but I would also like to know generally, since I'm sure in the future this will apply to other BPs for us.
Many thanks,
Jane

How does a business set up location services for their app?

We are an educational facility and would like the location services if the iPhone or iPad to show the availability of our app when a user is nearby.

You could use iBeacon. Google it.

Business System or Business Service for ORACLE system

Similar Messages

Maybe you are looking for