Business System problem

Hello Folks,
I have created 1 business system in SLD and unable to view that business system in the scenario which i have created in configuration.
Could you please let me know the reason.
Thank U in advance
Usha

Usha,
Have u assigned the TS to BS while creating the BS.
Thnx
Chirag

Similar Messages

Problem in Assigning the Business System

Hi,
I have problem in Assigning the Business System at Configuration when I am trying to configure the Communication Channel. I had created two Software Components and also Two Technical Systems (Third Party) and Business System and I imported the SWC into repository and done with the design and now I am not able to Configure, can anyone help me out as this is very urgent.
Thanks in advance
Andy

Hi Andy,
Check if you have created you business system according to the steps given here, maybe you missed out on something.
Configuring a Business System
http://help.sap.com/saphelp_nw04/helpdata/en/ae/e3bd4f6b61e146ad1384954ecabb41/content.htm
Defining a Business System as a Service
http://help.sap.com/saphelp_nw04/helpdata/en/3e/60653f0c9fa075e10000000a114084/content.htm
Regards,
Chandra

Problem in assign business systems in IB configuration

Hi ,
I have defined Technical systems,business systems properly in SLD and i also able to import my software components in Integragion Repository. i have defined all the data type , msgs types ,msg interface,msg mappings properly in IR.
But my problem is when iam trying to assign business systems in IB configuration scenario.
Business system list is not appearing in IB configuration.
Thanks
Hari

Hi,
Check the following..
1) Check Whether that BS is already is Assigned to Another Scenario
2) If it is Assigned to another scenario means, goto Objects TAB -
Expand Service With out Party
Business sysemRight click---Add to scenario( Select ur scenario)
3) Do SLD Cache through Envoronment----SLD Cache
once you do this..
1) Expand Your Config Scenario--Service Without Party-Business SystemRight clickAssign
2) Say Continue-Say Continue Select ur BS
3) Un check the Check Box Bottom of the Window
go throgh these blogs too..
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
/people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
Thanks,
Vijaya.

Problem by Maintaining a Business System for the Integration Server

Hi to all,
I have the following problem. I tried to change some Business systems configuration in SLD but accidentally deleted defined Business System for our Integration Server. After that I tried to create that business system again but I have the following error:
Integration Server already defined. There is already an integration server defined for the selected technical system. Please select role Application System.
Since than Im receiving the following error message when I try to refresh my adapter engine cache:
com.sap.aii.ib.server.abapcache.CacheRefreshException: Unable to find an associated SLD element
Do you know how can I define the Business System again currently I can't see it in SLD Business systems?
Ive also checked the IS URL (TR: SXMB_MONI) and it seems that its ok.
Regards
Naycho

Hi Naycho,
i think you have to clean up some sld rubbish
Go to SLD / Administration / Content Maintenance. Choose left side "all classes" or "landscape description" and right side "business system". Delete all entries you find for your business system, after that try to recreate it.
Regards,
Udo

SLD Business System Mapping Problem

Hi Experts,
i am facing a problem in Quality Environment, we have imported the all ir and id objects in to QA ,
my problem is the business system showing on integration directory ECCSystem (QA1CLNT400) but actual Business System want to show on integration directory is ECCSystem(QA0CLNT400) , some where the SLD Mapping we got a problem. Please help me out how to fix this issue. ,
1. How to Map Exact Business System in SLD. ?
2. To refelect the SLD Changes in ID we need restart ?
Thanks and Regards
G.Praveen Kumar

> my problem is the business system showing on integration directory ECCSystem (QA1CLNT400) but actual Business System want to show on integration directory is ECCSystem(QA0CLNT400) , some where the SLD Mapping we got a problem. Please help me out how to fix this issue. ,
>
first check in dev SLD what is the trasported target defined for Dev bussiness system .
> 1. How to Map Exact Business System in SLD. ?
If trasport target defined as QA1CLNT400 then change it to QA0CLNT400 in Dev SLD.
> 2. To refelect the SLD Changes in ID we need restart ?
>
no need to restart anything.
refer my blog
/people/rajasekhar.reddy14/blog/2011/02/21/transport-targets-and-groups-in-the-sld
Regards,
Raj

Problem while creating business system...?

Hi All
My Scenario is RFC - To - File. For this i am trying to creating a business system with web as ABAP. I have specified all the parameters but when i click on next i am getting "The selected client has an associated logical system name that is already used for another business system. Select a different client" message.
Now how to create an another business system as web as abap with same server , client , installation number and all.... Could you please tell me...
I dont want to use the existing business system
Thanks & Regards
Ravi Shankar B

Sun,
yes, u have 2 option as Ramesh said...
There is no problem in reusing the business system.
The selected client has an associated logical system name that is already used for another business system. Select a different client" message. if u want to create another business system...give dirretent Logical System name
and different client
see here how to create Business system...step by step!!
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&
regards
biplab
**reward if it helps you!!

Problem with importing Business System

Hello All,
I scussfully exported and imported components and products and scussfully exported business system from pi7.0 server. I want to import this business system on another PI7.0 Server. I am facing problem while importing business system is Business group is not assigned to business system. How to create Business group. Plz suggest me how to import business system.
Thanks
San

SAP help defines it - http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
Also for more info,
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf - look into page 10 for a reference.

Problem while activating sender business system

hi,
when iam trying to activate my sender business system,iam getting the following error
" Check Result for Object ECC6_BS SAP system ID EC6 and client 800 already exist in service | ec6_bs_sap".
what would be teh problem ?
Thanks .
Mano

>
manoj murugesan wrote:
> hi,
>
> when iam trying to activate my sender business system,iam getting the following error
>
> " Check Result for Object ECC6_BS SAP system ID EC6 and client 800 already exist in service | ec6_bs_sap".
>
> what would be teh problem ?
>
> Thanks .
> Mano
there is already a Business system defined with the same details. That is the reason. ec6_bs_sap check that BS

Problem with business systems in SLD

Hey guys
i m doing a IDOC to file scenario and m creating two business systems in SLD
the first one uses the logical system name of the R/3 server and has been configured as WAS ABAP.
when i try to create the second one as a third party using the logical system name i defined in BD54(on R/3 server),i get the error sayin that a business system already exist with the logical system name.
i do have one businees system which is using the same logical system but that has been configured as WAS ABAP.
cant i assign two different business names to same logical systems?
thanx
ahmad
Message was edited by:
Ahmad

Hey
thanx ,now when i try to use the same business system name for the R/3 server in the second scenaario,i dont see the business system in ID,i did cache refresh,
also just want to make sure
i have configured my SLD as under for the first scenario
created two business system,first one is using the logical system name of the R/3 server configured as WAS ABAP and the second one is configured as third paarty and using the logical system name created in BD54.
do these setting looks good to u?
now can i use both these business system in my second IDOC to File scenariio?
thanx
ahmad

Problem Assigning Business Systems

Hi,
Landscape: New XI 3.0 SR1 Installation, W2K, oracle.
SLD: on a separate server with ABAP+J2ee. ABAP datastore for UME. Updated with new CIM, CR content.
Followed oss note: 768148 - Using a separate SLD for XI
We completed all the settings as per post-installation guide and XI configuration guide. We were able to connect & create the technical and business systems for XI and R.3 ECC 5.0 in the SLD.
SLDCHECK in XI server is fine, and shows the correct information about the SLD.
But when I am trying to assign a business system in Integration Directory - Service without third party, in the following wizard I am getting an error message
"Access to object list of type "BusinessSystem" using the InternalEOAService BusinessSystemAccessor failed"
Any help would be appreciated

Hi Rao,
The following links u may find it useful.
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
http://www.sap-press.com/downloads/h982_sample_chapter.pdf
*Please Reward points if u find it useful.
regards,
gyanaraj

Business system transport problem.

Hi,
I am trying to impor the objects in directory system but i ma getting below erroe message while transport.
Business system XXX is not assigned a business system in group YYY.
where YYY is production group.
Wat i can figure out is I need to create the new business system and assigned that new business system to Production group in SLD.
Let me know whether I am correct or not?
chirag

hello Chirag,
1)First Create the Business Groups on Both the Server (DXI ,QXI,PXI )
-     DEV_GROUP for Development Environment
-     QA_GROUP for Quality Environment
-      PRD_GROUP for Production Group
2) Assing the Business Groups to respective Integration Servers
3)Assign the Quality Business Systems to QA_GROUP and Production Business systems to PRD_GROUP
Automatically all the Business Systems are assigned to respective Integration Servers.
4)Select the Business System Ex : DB2QA00. Under the Details select Transport :
Click on the Add/Change Target..
5) On Click of Button we will see the Target Group and Target Business System.
Here for DB2QA00 target Business System is DB2PRD00 under PRD_GROUP.
regards
Gangaprasad

Missing business systems in model configurator

Hello,
i am on PI 7.1 and have to configure a SRM scenario. In step "assign communication component" (business system) in the model configurator all business systems are missing.
Please the screenshot:
[http://img211.imageshack.us/i/bild1m.png/]
What configuration is missing? In SLD all business systems with software are maintained.
Thanks for help
Regards, Trevor

Dear Trevor,
Let me solve your problem,
In the snapshot it says clearly that "Search Criteria" Communication Component Selection "Value" for Product SAP SRM 7.0
Which means in SLD it will search for the Business Systems which got assigned with Product SAP SRM 7.0.
So please check your SRM Business System "MSRCLNT001_SRM" and assign the Product SAP SRM 7.0 to it in SLD.
If you couldn't find the Product in the SLD then you must update your Content Repository to latest level SAP_CR 6.6 in SLD.
Please check the note for SAP CR Update:
SAP Note 669669 - Updating the SAP Component Repository in the SLD
Similarly you may face the problem for your ERP as well, so select Product SAP ERP 6.0 EHP 4 if you are implementing the same.
Hope this is helpful.
Regards
Praveen K

** SPROXY is not working properly in Business System

Friend
My SAP Business System is having Ver 7.00. This system is already connected with our XI server. I face 2 problem when execute SPROXY tcode in this system.
1) System asks username & password for every click.
2) Whatever I have created SWCVs in IR, only SWCV names are displayed there are no objects under that.
I troubleshooted the following things.
I have run the following reports.
1) SPROX_CHECK_HTTP_COMMUNICATION - HTTP Communication is working fine.
2)SPROX_CHECK_IFR_RESPONSE - We get the response.
3)SPROX_CHECK_IFR_CONNECTION - Integration Builder connection is working properly and Data understood.
When I run the 4th report, SPROX_CHECK_IFR_ADDRESS, the data in the SPROXSET table is not shown.
Actually when I checked the data in the SPROXSET table, there is no data in that table.
Friends, how do enter data in SPROXSET table ? How to bring all the objects in SPROX under SWCVs.
Could you kindly help me to solve the above 2 issues ?
Thanks in advance.
Kind Regards,
Jegathees P.

Actually
when you run the SPROXY it does 2 things
1. can take the rep information from the table
2. can take the rep info from the exchange profile in the SLD
if you want the sproxy to take the data from the exchange profile do the following:
RFC Dest: should work fine.
LCRSAPAPI
SAPSLDAPI
SLDAPICUST should work fine?
Also in RZ70 TC you should point to the SLD.
This 2 RFC are Registered Programs, if this RFC is working then your Application system can ping to the SLD where the exchange Profile is present.
Message was edited by:
n Khan

Error When Assigning a Business System in ID

Hi,
I'm using PI 7.1. and when I'm trying to assign Business System from our SLD (menu path Business System --> Assign Business System). it throws me the following error:
Access to object list of type "BusinessSystem" using the InternalEOAService BusinessSystemAccessor failed
What are the steps to debug this?
Thanks.
Prema Boodi

The problem is solved using below solution:
We should have USERS: PIDIRUSER & PIREPUSER
with Roles:
SAP_XI_ID_SERV_USER
SAP_XI_MONITOR_J2EE
And User Type must be service.
Also check the users are not locked.
And passwords for PIDIRUSER & PIREPUSER users should have same password in Local SLD & in Central SLD. (if you are maintaning more than one SLD)..

Error while exporting/transporting the Business system from Dev to Quality

Hi,
We are getting the following error whil exporting/trsnporting the Business system from development(SLD) env to quality(SLD) environment. The error is
404 Not Found
The requested resource does not exist.
Details: Go to main page of this application!
We have followed the following procedure to export :
1. opened the business system.
2. Clicked on export option
3. tried to download
then we got the above error message.
Please provide your precious inputs to resove our problem.
Thanks
Ramesh

Go through the following links for transporting XI objects.
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
ere's a good link for what you are looking.
Re: Transport design and configuration objects
Here are some blogs.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Pls reward if useful

Business System problem

Similar Messages

Maybe you are looking for