Business system transport problem.
Hi,
I am trying to impor the objects in directory system but i ma getting below erroe message while transport.
Business system XXX is not assigned a business system in group YYY.
where YYY is production group.
Wat i can figure out is I need to create the new business system and assigned that new business system to Production group in SLD.
Let me know whether I am correct or not?
chirag
hello Chirag,
1)First Create the Business Groups on Both the Server (DXI ,QXI,PXI )
- DEV_GROUP for Development Environment
- QA_GROUP for Quality Environment
- PRD_GROUP for Production Group
2) Assing the Business Groups to respective Integration Servers
3)Assign the Quality Business Systems to QA_GROUP and Production Business systems to PRD_GROUP
Automatically all the Business Systems are assigned to respective Integration Servers.
4)Select the Business System Ex : DB2QA00. Under the Details select Transport :
Click on the Add/Change Target..
5) On Click of Button we will see the Target Group and Target Business System.
Here for DB2QA00 target Business System is DB2PRD00 under PRD_GROUP.
regards
Gangaprasad
Similar Messages
-
SLD Business System Mapping Problem
Hi Experts,
i am facing a problem in Quality Environment, we have imported the all ir and id objects in to QA ,
my problem is the business system showing on integration directory ECCSystem (QA1CLNT400) but actual Business System want to show on integration directory is ECCSystem(QA0CLNT400) , some where the SLD Mapping we got a problem. Please help me out how to fix this issue. ,
1. How to Map Exact Business System in SLD. ?
2. To refelect the SLD Changes in ID we need restart ?
Thanks and Regards
G.Praveen Kumar> my problem is the business system showing on integration directory ECCSystem (QA1CLNT400) but actual Business System want to show on integration directory is ECCSystem(QA0CLNT400) , some where the SLD Mapping we got a problem. Please help me out how to fix this issue. ,
>
first check in dev SLD what is the trasported target defined for Dev bussiness system .
> 1. How to Map Exact Business System in SLD. ?
If trasport target defined as QA1CLNT400 then change it to QA0CLNT400 in Dev SLD.
> 2. To refelect the SLD Changes in ID we need restart ?
>
no need to restart anything.
refer my blog
/people/rajasekhar.reddy14/blog/2011/02/21/transport-targets-and-groups-in-the-sld
Regards,
Raj -
Regarding Business System Transport
Hi,
I have some queries with Exporting the Business System between the DEV and QTY servers
I have gone through this Help file and have few queries
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
We are in 2 seperate SLD's
In DEV Server
I have created BS as SAP_Dev
I want the BS naming in Quality server as SAP_Qty.
Queries:
1) Do i need to create the Quality BS i.e SAP_Qty in DEV Server inorder to configure Transport Groups??
2) Do i need to create the Quality BS i.e SAP_Qty in QTY Server????
RegardsHi Bopanna,
Go through this links..
File transport method:
http://help.sap.com/saphelp_nw04/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/frameset.htm
CMS transport method:
http://help.sap.com/saphelp_nw04/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/frameset.htm
CMS for SAP Exchange Infrastructure:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
How to handle Xi with CMS:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
Configuration of CMS in Central NWDI & SLD to transport XI objects:
/people/praveen.mayalur/blog/2007/05/31/configuration-of-cms-in-central-nwdi-sld-to-transport-xi-objects
XI Software Logistics Solution III: CMS:
/people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
In ID u need to change the communication parameters manually.
Reward points if it isuseful..
Thanks,
Satya.. -
Obligatory transport target for business system SAPR3D not found in System
HI All ,
We have installed New PI 7.1 system and stared migrating the interfaces from XI 3.0 to PI 7.1 . in Devlopement system .
IR object have been successfully deployed but while delopying ID objects got the following error . Obligatory transport target for business system SAPR3D not found in System Landscape Directory.
When I checked with business system transport target was not defined ., Please suggest how to go ahead further .
Thanks ,
PrakashHi Ravi,
Please go through below disucssion it is on the same line of your question.
Transport target for business system not found in System Landscape Director -
Error while exporting/transporting the Business system from Dev to Quality
Hi,
We are getting the following error whil exporting/trsnporting the Business system from development(SLD) env to quality(SLD) environment. The error is
404 Not Found
The requested resource does not exist.
Details: Go to main page of this application!
We have followed the following procedure to export :
1. opened the business system.
2. Clicked on export option
3. tried to download
then we got the above error message.
Please provide your precious inputs to resove our problem.
Thanks
RameshGo through the following links for transporting XI objects.
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
ere's a good link for what you are looking.
Re: Transport design and configuration objects
Here are some blogs.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Pls reward if useful -
Transport does not map business systems
Hello,
we have a problem when transporting XI configuration objects (via normal file export/import, not CMS). In the SLD, we have configured business systems
T01CLNT010, belongs to group dev and has transport target PROCLNT010
T01CLNT020, belongs to group dev and has transport target PROCLNT020
the strange thing is the first business system is not converted correctly to the prod business system after transporting the XI config from XI dev to XI Prod. For the second business system, that works fine. I compared the entries in the SLD, both look fine. But one does not work, the other does.
For the one that does not work, the transport goes fine, does not show any error, but just does not convert the name. (which of course will lead to an error when trying to activate the objects, because T01CLNT010 does not exist in XI prod). So it seems it cannot find the SLD transport target for that object.
Does anyone know how XI exactly finds out how to convert the business system while transporting it to production ? How does it find the connection between the XI business system object and the corresponding SLD entry ? Just by name ? Or is some kind of internal GUID used which may have been broken ? Can I see that anywhere ?
Is it safe to re-associate the SLD business system to the XI business system in the XI integration builder ? Or are dependent objects (e.g. receiver det.) then lost ?
CSYDoes anyone know how XI exactly finds out how to convert the business system while transporting it to production ?
The only thing that matters here is properly defining the Transport Targets.
How does it find the connection between the XI business system object and the corresponding SLD entry?
Not sure about this but I think the name in the transport target would suffice for this requirement. Also, make sure that the groups are properly defined and target SLD has all business systems properly maintained.
Is it safe to re-associate the SLD business system to the XI business system in the XI integration builder ?
How will you be doing this re-association? If you are thinking of changing the Business system name in ID manually, then it would mean almost complete development in ID.
Regards,
Prateek -
Hi,
I am facing a quite interesting scenario. The business systems in QA and PROD were manually created and only the IR objects were transported using File system.
Now we have 10 new business sytems in Dev and I do not want to do the old process (which is also not the suggested approach). I have set up the transport groups for dev and QA in dev. My question is I have set up transport groups for the business systems already in QA. While transporting the SLD( which is being done for the first time), will the business ssytems being transported have any impact of the applications running in QA??
My main concern is will the difference in GUID's impact the applications. If I am too confusing here is a small example. Business system BA1 was created manually in QA and has interfaces using it in QA. Now I have a new Business system BA2 and I want to do the SLD transport in the actual way. So I have set up transport groups for BA1, BA2 in DEV. After transporting it to QA, will the transported BA1 from DEV to QA impact the interfaces using it in QA.??
-KenHi Ken,
I had to do the same long ago. It did not pose any problems. Did not try it with latest versions though.
I think the new GUID will be overlaid on the old one, do not remember exactly.
regards
Shravan -
Obligatory transport target for business system BS_DEV in SLD
Hi all,
We are moving receiver detrmination from QA to PRD, there we are getting one error
"com.sap.aii.ibtransportclient.XiTransportException: caused by: ClientServerException exception:Impo
>>>rt failed because of business system transfer of object Receiver Determination BS_DEV
>>> * *: Obligatory transport target for business system BS_DEV not found in Sys
>>>tem Landscape Directory caused by: com.sap.aii.ib.core.transport.api.PostprocessingException: Import
>>>failed because of business system transfer of object Receiver Determination BS_DEV
*: Obligatory transport target for business system BS_DEV not found in Syste
>>>m Landscape Directory caused by: com.sap.aii.util.hmi.api.HmiMethodFault: caused by: ClientServerEx
>>>ception exception:Import failed because of business system transfer of object Receiver Determination
>>> BS_DEV * *:Obligatory transport target for business system WP
>>>C_Dev not found in System Landscape Directory caused by: com.sap.aii.ib.core.transport.api.Postproce
>>>ssingException: Import failed because of businesssystem transfer of object Receiver Determination
>>> BS_DEV * *: Obligatory transport target for business system BS_
>>>DEV not found in System Landscape Directory"
I am moving the same object from development to production, i feels ther is some problem in setting transport target.
BS_DEV target system is BS_QA, in development sld
BS_QA source system is BS_DEV anf target system Is BS_PRD in Quality sld
BS_PRD source system is BS_QA, in production.
The above error occurs when we are moving same object which i moved from development to quality to production.
whether i need to take obejct from quality and need to move that one to production, or i can use the same development object to production...?
Regards
Pradeep P NHi,
Even I am facing the same problem.
we have given the Transports Target as mentioned, but still facing the same error:
Deployment
Transport request : DPIK900141
System : QPI
tp path : tp
Version and release: 375.30.25 710
CTS Deploy Service - Version 0.92 06.03.2007
========================================================================
Deploy Web service destination = CTSDEPLOY
Directory = /usr/sap/trans/data
SDM Deploy URL =
SLD Deploy URL =
XI Deploy URL = http://sqnpi1.sap.sgroupit:51600
Double-stack system QPI
Deploy for XID
Deploy File = 2f8021d0f9ca11dea81e001a64925608
Start of Web service log
Deploy Service called with following parameters:
CommunicationData-Type:1
CommunicationData-Address:http://sqnpi1.sap.spoolzgroupit:51600/dir
CommunicationData-Host:sqnpi1.sap.sgroupit
CommunicationData-Port:51600
CommunicationData-User:'filled'
CommunicationData-Password:'filled'
Deployable(0)
Deployable-Type:1
Deployable-Id:/usr/sap/trans/data/DPIK900041/2f8021d0f9ca11dea81e001a64925608
com.sap.aii.ibtransportclient.XiTransportException: caused by: ClientServerException exception:Impo
>>>rt failed because of business system transfer of object Receiver Determination DPI SI_POS_CH_SN
Returncode:'8'
Deployment
End date and time : 20100105151741
Ended with return code: ===> 8 <===
Can anyone guide to solve it. -
Transport of config objects...business system prblem...
Hi Gurus,
We want to transport dev and config objects from XI qua to a XI test server... we hav successfully transported all design objects...but we are facing problem while transporting the config objects because of business and technical system issue....the business system in quality points the ECC quality....how can i tranposrt the config objects with same business system name....is there any way??
Thnx in advance...Hi,
This will be Maintained in SLD .You know what will be Business system name in Quality or Production.
While Creating Business system you need specify in the Transport Tab which is your Target Business System and also the Group like Production or Quality ,
When you do transport from Development and for the Dev_Bs (Bussiness system ) if you assign the Qaulity System Bussiness system ,it automatically move the object under Quality Business System.
if this setup is done in SLD when you do transport the Configuration Object It Automatically assigns the Quality and production Business System if you are doing Transport from Dev Respectively.
hope this helps.
Thanks,
Madhu
Edited by: Madhusudhan Honnappa on Sep 3, 2009 8:11 PM -
Can there be more than one transport targets for a business system in sld
Hi All,
I have a question about transport targets in sld for sap xi 3.0 sp19.
We have a requirement where a business system needs to have two transport targets.In SLD i see that only one transport target can be assigned. Is there any way to assign more than one transport target to a business system?
I know that there can be more than one source for a business system where more than one different business systems have the same business system as the target.
I am not sure if a business system can have more than one transport target .If yes , what is the way to add more than one ?
Please help .
Thanks,
PadmajaHello,
I know that there can be more than one source for a business system where more than one different business systems have the same business system as the target.
As far as I know, you would have to change the target everytime you will transport it to a different target e.g 3 target systems = 3 times you change the transport target in SLD.
Regards,
Mark -
Problem in Assigning the Business System
Hi,
I have problem in Assigning the Business System at Configuration when I am trying to configure the Communication Channel. I had created two Software Components and also Two Technical Systems (Third Party) and Business System and I imported the SWC into repository and done with the design and now I am not able to Configure, can anyone help me out as this is very urgent.
Thanks in advance
AndyHi Andy,
Check if you have created you business system according to the steps given here, maybe you missed out on something.
Configuring a Business System
http://help.sap.com/saphelp_nw04/helpdata/en/ae/e3bd4f6b61e146ad1384954ecabb41/content.htm
Defining a Business System as a Service
http://help.sap.com/saphelp_nw04/helpdata/en/3e/60653f0c9fa075e10000000a114084/content.htm
Regards,
Chandra -
Problem in assign business systems in IB configuration
Hi ,
I have defined Technical systems,business systems properly in SLD and i also able to import my software components in Integragion Repository. i have defined all the data type , msgs types ,msg interface,msg mappings properly in IR.
But my problem is when iam trying to assign business systems in IB configuration scenario.
Business system list is not appearing in IB configuration.
Thanks
HariHi,
Check the following..
1) Check Whether that BS is already is Assigned to Another Scenario
2) If it is Assigned to another scenario means, goto Objects TAB -
Expand Service With out Party
Business sysemRight click---Add to scenario( Select ur scenario)
3) Do SLD Cache through Envoronment----SLD Cache
once you do this..
1) Expand Your Config Scenario--Service Without Party-Business SystemRight clickAssign
2) Say Continue-Say Continue Select ur BS
3) Un check the Check Box Bottom of the Window
go throgh these blogs too..
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
/people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
Thanks,
Vijaya. -
How to make an entry in transport tab of business system in SLD
Hi gurus,
In PI, in SLD we maintain Business systems. In this business sytem if we go to have a detail look there is a Transport tab.
What is this used for and how to make an entry here.
I'm a basis person and i'm configuring XI for the first time. Kindly help.
Regards,
Priya1. Yes , you have to maintain target business system for the EACH BS in PROD system.
2. Normally we do have 2 different sld one is explictly for production system. another one is for dev and QA system. Once u done creating all the systems needed for the project. we will copy all business from the dev server to production server. So production server will have all BS from Dev and BS of production server.
3. i am not sure about this. i dont have particular docuemnts . normally we assign target business system in transport tab. and in Intergration Directory we will export the business system from DEV and and import the business system in production system.
Regards,
Balaji
Edited by: Balaji Pichaimuthu on May 19, 2010 9:06 AM -
Transport target for business system not found in System Landscape Director
Folks,
We have new installed new PI 7.1 system and importing interfaces from the OLD XI 3.0 system in to new PID 7.1 system.
We are getting following error when we try to import an interfaces in to new PID system:
Import failed because of business system transfer object
Communication component XID_FileSystem: Obligatory
transport target for business system XID_FileSystem not found in
System Landscape Directory
We are yet to install PIQ system.
All the interfaces in the old XID system have transport target of XIQ system. I removed the transport taget for the interface, but transport target is still showing in the Business system under transport target head.
How can we overcome this issue as we will not have PIQ system atleast for two weeks.
Thanks in advance,
Regards
ChanduHi,
You need to maintain Transport Groups and target for business systems while SLD transports between your XI system and PI 7.1
Illustrated with DEv & PRD here.
Procedure:
1) Call Integration Builder screen on DEV Server with http://hostname:J2ee Port/rep
2) Call SLD (System Landscape Directory) Component from the Integration builder
Save all the Following .zip files on the Local Desktop
3) Select the Software Component & say Export that you want to Export from DEV
Server to Production server and which is going to use in the IR of XI
4) Also Select the Product of the above SWC and say Export
5) Select the Technical Systems (TS of XI & TS of the SAP R/3) and say Export
6) Select the Business System(s) & say Export; those are associated with above Exported
Technical systems.
In Production Server
1) Logon to the SLD of the Production Server.
2) Create a Technical System and Business system which points to the Production SAP R/3
3) Go to Administration TAB in the main page of SLD
4) Select the Import option to Import the SWC , PRD, TS,& BS which we Exported Earlier in DEV Server
5) Click on Browse and select the .zip files that is to Import into Production Server,
Which were stored on the local desktop at the time of DEV Server Export
And say Import Selected File Option
By this we exported and imported the SLD Objects
Now we have to create transport groups and transport targets in the Production server of SLD
Creation of Transport Groups
Edit GroupsGroup1) Select the Business systems
2) Click on New Group and give the name of the group as DEV_group & select the
Corresponding Development serveru2019s integration Server
3) Similar way create another group for Production serveru2019s business system as
PRD_group and select the Production serveru2019s integration Server
Creation of transport targets
This is to Define which business systems in two different groups correspond to each other
1) Select each Business system in the SLD and select transport TAB---click on
Add/Change Target and select its corresponding target business system.
For Example:
If you select the business system of Production XI server means
In the target you have to select group as DEVGROUP and the business system of Development XI server.
Like this do the same for other business systems also
Ex:
BS_PRD_Integration Server----
BS_DEV_Inetration Server
How to create Transport Groups & transport Targets
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
Regards
Seshagiri -
Problem by Maintaining a Business System for the Integration Server
Hi to all,
I have the following problem. I tried to change some Business systems configuration in SLD but accidentally deleted defined Business System for our Integration Server. After that I tried to create that business system again but I have the following error:
Integration Server already defined. There is already an integration server defined for the selected technical system. Please select role Application System.
Since than Im receiving the following error message when I try to refresh my adapter engine cache:
com.sap.aii.ib.server.abapcache.CacheRefreshException: Unable to find an associated SLD element
Do you know how can I define the Business System again currently I can't see it in SLD Business systems?
Ive also checked the IS URL (TR: SXMB_MONI) and it seems that its ok.
Regards
NaychoHi Naycho,
i think you have to clean up some sld rubbish
Go to SLD / Administration / Content Maintenance. Choose left side "all classes" or "landscape description" and right side "business system". Delete all entries you find for your business system, after that try to recreate it.
Regards,
Udo
Maybe you are looking for
-
Can't import songs to iTunes library
So, I've looked around and seen that other people have experienced this same problem. However, the solutions provided in those various discussions proved to be useless for me. My issue is that when I try to add songs to my iTunes library, nothing hap
-
Z77A-GD65 - fast ram and Intel Rapid Start don't work together??
Greetings. I have got 2x4Gbyte G.Skill CL10 2400Mhz ram. When running this ram at its default speed at 2400Mhz, Intel Rapid Start don't work. When I shut it down, it acts normal until the point where the system "wakes up" for a few seconds to write t
-
Reading newly opened command prompt output
I need to use SSH to connect to a server. Rather than downloading a third party SSH API, I would like to use Putty which is already on my computer. The problem is that when using Putty from the command line to connect to a server it opens the connect
-
HI GUYS, CAN ANYONE PLS HELP ME OUT HANDLING EVENTS IN ALV(OOPS)....iS THERE ANY CLASS TO BE DEFINED ?????? PLS HELP IF ANYONE HAS THE CODE FOR THAT...........
-
I can drag music onto my ipod touch from iTunes on my pc but it wont fully load - greyed out with circular arrow symbol -any ideas what the problem is?