Business systems are not reflecting in Int. Directory

Hi All,
I am getting a problem regarding business systems. Any business system which i have in SLD is not showing up in the ID when I am doing the configuration.
Somebody suggested SLDCHECK...
When I run this transaction I get the message that "Connection with SLD does not work". Is it related ?
Many Thanks,
Mona.

Hi,
The Integration server is not connected to the SLD.
Please check if you have done the following
1. Updated transaction SLDAPICUST with SLD server details information
2. Create TCP/IP connection in LCRSAPRFC and SAPSLDAPI in the trnsaction SM59
3. Create the same in the visual admin.
All the details are given in the SAP XI configuration Guide.
Regards
Vijaya

Similar Messages

  • Changes are not reflecting in Int Directory. Pls suggest

    Hi All,
    I made changes in my Integration Directory.
    I run the scenario. Changes are not reflected in sxmb_moni.
    I do SXI_cache, CPA Cache and then again run scenario.
    Changes are reflected.
    What steps to do so that I do not have to do SXI_cache, CPA Cache again to get my changes reflected.
    Regards

    Hi,
    I have done the post installtion steps.
    My XI was working fine initially
    But yesterday it stopped working properly.
    My ID changes were not reflecting.
    Then I did SXI_cache, CPA Cache.
    Then my ID changes again started working properly.
    Since my scenario has to go in production:
    Pls tell me what steps to do so that
    I do not get this SXI_cache, CPA Cache problem again.
    Regards

  • Business system is not displaying  in Integration  Directory

    Hi Friends,
        i'm doing RFC  to RFC scenario..  here.. upto IR(Integration Repository ) i did  every thing fine.. but in  ID(Integration Directory )  for assiging business systems i did't get   one  business systesm. in SLD part every thing i'm getting.. but here  for adding the  system into my scenario  only  i'm not getting   particular one  business system  in OBJECTS  list...
      is it any authorisation problem... because  for other  users it was getting  .. plz suggest me the solution.. for getting
    thanks
    Babu

    Hi Babu,
      Once the business system is imported from sld then you can assign that business system in any number of scenarios. You are telling tat other users are using it and if so then it should be listed in the object list..check if any one might have deleted the business system instead of removing from their scenario...and if so...you can see the business system in the imported objects from sld.
    Thanks,
    Prasanthi.

  • Standard business contents are not installed in BI system

    I am new to SAP Basis Team,  Consultants are saying  that standard business contents are not installed in BI system. What package should I install or what is the steps I should Do. Following is the content of SAINT
    FINBASIS  --  600             -- 0013   -- FINBASIS 600 : Add-On Installation
    PI_BASIS  -- 2006_1_700   -- 0006  -- Basis Plug-In (PI_BASIS) 2006_1_700
    SAP_BW  -- 700                -- 0017  -- SAP NetWeaver BI 7.0
    SEM-BW   -- 600               -- 0013  -- SEM-BW 600 : Add-On Installation
    ST-A/PI     -- 01K_BCO700  -- 0000  -- Servicetools for other App./Netweaver 04
    ST-PI        -- 2005_1_700    -- 0006  -- SAP Solution Tools Plug-In

    I'm not on a 7.x system ... but on my 3.x system, the component BI_CONT is for the business content data.
    Brian

  • Business system RD1 Not Found

    Hi All,
    when i was trying to import the tpz from XI Dev into QA (XI Dev and XI QA are using the same SLD)
    i get the error:
    Import failed because of business system transfer of object Service | RD1: Obligatory transport target for business system RD1 not found in System Landscape Directory
    But i already have the RD1 in the SLD and define the transport target, the target business RQ1 is already in it.
    what's more SLDCHECK is fine, and i try to clear sld cache but without any luck.
    Please help
    thanks a lot

    Hi,
    It seems like you have different GUIDs for SCV within XI system and SLD. Thus while transporting it will create the problem, as the GUID conflicts with SLD side GUID.
    Changing the GUID is possible but must be done in a consistent way within the XI system and SLD
    A comprehensive guide about how to change SWCV-GUIDs for XI
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/adb8f911-0d01-0010-82b9-a8134d7d89d5
    Thanks
    Swarup

  • Business system does not exist in the SLD

    hi,
    I am trying to export the ID objects into QA, when i get the error saying that "Business system D01 does not exist in the SLD".
    I have created the Transport target for the D01 business system in the SLD to point to the QA system T01.
    When i try to export the objects and reimport them into QA i get the above error.
    Any ideas what could be missing?
    Thanks,
    Tirumal

    hi,
    Prashant -
    I did refresh the cache but no luck. I still see only the QA Business system but not able to see the Dev SLD Business systems at all.
    Stefan -
    They are pointing to the same sld. If i do an sldcheck from QA XI Server it directs me to the dev SLD. So this is good.
    I am using only 1 SLD. Is there a way that i can tell QA to look for DEV SLD instead of QA SLD?
    Thanks,
    Tirumal

  • Changes are not Reflecting in WAD

    Dear Gurus,
    I got a problem in WAD. Changes are not Reflecting in My WAD. When i created NewQuery in WAD by just placing Chart & Saved it. After executing Chart is displaced.Again I updated the same query by placing table and saved it. After Executing Table is not displayed only previously saved Chart is displayed. Could any one Kindly solve my Problem.
    Thanks,
    Sony

    Hi Sony,
    SAP BI has HTTP Cache and the web templates are stored in the HTTP cache of the server. So, when you change a template and execute it again - the previous version which is stored in the HTTP cache is being retreived.
    To correct this, go to TCODE SMICM in the menu bar >> Goto >> HTTP Server Cache >> Invalidate -> Global in system
    Once this is done, ask basis to restart the java engine.
    I hope this helps you.!
    -Pradnya
    Edited by: Pradnya Rane on Sep 29, 2009 8:05 AM

  • Changes made in LR 1.3 to psd files are not reflected in ACR 4.3, Bridge 2.1.1.9, or Photoshop CS3

    I have repeatedly imported several psd images into LR 1.3, made changes in the develop mode, and saved metadata to file manually in addition to having the auto write metadata option on in LR and ACR. Any changes I have made in LR are not reflecting in Bridge previews or in ACR or Photoshop. I don't believe I should have to utilize the write to xmp options (even though I have been) since the files in question are psd and the metadata gets written directly into the file. If I delete the photo from LR, and even delete the LR catalog (new user trying to make it work with 1 photo at least before importing all images) and re-import the psd to LR it appears with the changes and can backlog in the history panel to it's original state upon import into LR. I would have to be in LR though to know that anything was altered as the other Adobe programs will not display the changes.
    If anyone has any help - I would greatly appreciate it!
    Thanks,
    Ann
    System=
    160 GB hard drive
    Intel core duo T7500
    2 GB Ram
    Windows Vista 32 bit
    ACR 4.3
    LR 1.3
    Bridge 2.1.1.9
    PS CS3 (updated last week)

    I don't think the problem lies in the name. LR is after all meant to function as a data base of images and be a companion program to PS - with PS doing the heavy editing lifting. I do understand that PS is a pixel editing file and LR is not. I like the idea of the non-destructive editing that LR has to offer and for a lot of image "developing" I prefer LR's interface to ACR.
    In my humble opinion, I just think that the Photoshop family of products should all be able to read the same metadata. If I am starting in LR with a psd file (with layers) and I continue to process the image further in LR and save the metadata - therefore saving the changes - I want to be able to open that same file (not another copy) in ACR, PS, or Bridge and have those changes reflected. The only way to do that currently is to export the file and when you do that you lose the PS layers and the LR history panel or another way around it is you can have edit copies of the same file. If at a later date you wanted to go back and change something, you can't just pull out a layer in PS or undo a history state in LR and with the multiple copies of essentially the same image you end us with any editing history scattered amongst multiple files. I already keep 2-4 (original, psd, jpeg print, jpeg web) files for one image which I think is more than adequate. Which is why I find the current set up so frustrating. For now I have just settled for exporting jpegs so I can see the changes.

  • LPA changes are not reflected fully in 2LIS_02_SCL

    The changes done to scheduling agreement, schedule lines are not reflecting in 2LIS_02_SCL, and there by resulting errors in delta update in BI system.
    For example
         LPA     RM     SCL     Quantity                                    (2LIS_02_SCL)
    ODS(A)      3001             15          800
    ODS(C)     3001     X     15          300
         3001          15          800
    PSA       3001     X     15          400
            3001             15          900
    As we are using the Update type Addition,
    From PSA, it is clear that the change is 500; this change got reflected in ODS properly.
    But when I compare ODS data with EKET data,
    LPA     SCL     ODS(Active)          EKET
    3001     15     800               900
    As you can see wrong validation results between BI & R3
    I am missing the below  changes happened to SCL in the extractor
         3001     X     15          300     
         3001          15          400
    The missing above entry is resulting errors.
    Does anybody know how the EKET line changes can be tracked?
    How to check the V3 Update, we checked the program: RMBWV302
    Does anybody have idea where to track this error.
    Note: the above case is happening to only a for few documents
    Regards,
    NK.A
    Message was edited by:
            nandakumar a

    Hi Renjith,
    Thanks for the reply. Can you please let me know few more answers to the below points.
    As the datasource 2LIS_02_SCL does not takes this event into account (only MA, MB, MC and MD), this field is not passed to BW (you can see the events per datasource in transaction LBWE)
    You are referring to posting of the Material Ledger posting right ? Can you please give some more information about MA MB MC MD as I have verified in LBWE and could not find anything about it except that its picking that GLMNG value from MCEKET table.
    Renjith, Please update your views on the below query. I am not able to get any answers from anyone on this query. I appreciate your reply.
    In my opinion you would be able to fill it in the customer-exit of LIS (EXIT_SAPLEINS_001) or BW (EXIT_SAPLRSAP_001)
    If I add a zfield to the SCL DS and then populate that field with the code in the include ZXRSAU01 , EXIT_SAPLRSAP_001 in that going to help.
    Do I have to verify the events MA MB MC and MD while populating this zfield or I can just do a direct lookup on EKET
    select single * from EKET
    where EBELN = l_MC02M_0SCL-EBELN
    and EBELP = l_MC02M_0SCL-EBELP
    and ETENR = l_MC02M_0SCL-ETENR will do ?
    So when ever the ds fields are getting populated in the org DS ...it will find this zfield in the same structure and will fill this field. Is that going to fix it ? I have also found couple of SAP Notes on the same issue and do you think implementing those notes will fix the problem without the zfield or code.
    Could you please check out these notes 100690 and 431145. Please suggest.
    Thanks,
    Daniel

  • Changes are not reflect in PRD

    Hi All,
    i have an issue that is
    i want to be small change correction in one report in BI DEV system,the changes had done successfully with one transport request,when i transport the request into BI PRD which has been not reflect but in quality changes been accommodate
    suggest any one
    Thanks In Adv
    muraliv

    hi bhanu thank you for your response
    sap doesn't do magic i know ,but cahnges are not reflected into my production system ,it was the fact,i am not here to waste my time to post the unreliable things
    the released transport request ended with RC 4 but i didnt find any chane but in quality its getting reflected,
    i am also tried one more new request to my query and then release but i didnt work
    thnak you

  • Changes are not reflecting in QA after transport

    Hi Everyone,
    I am having an issue with the transport in PI. After making the changes in development, i exported the tpz file to Quality. The changes got reflected. Then for testing purpose some changes were done in the Quality IR. Now i again exported the tpz file from dev to QA. But the same changes are not reflecting.
    Has anyone faced such a problem? Need your help experts.

    Hello,
    Check in IR > Environment> cache status overview. Is it in green status??
    Check if the import of .tpz file is successful in quality IR??
    >>Then for testing purpose some changes were done in the Quality IR
    Also, check if there are any conflicts in the IR of quality system??
    -Rahul

  • Changes are not reflecting in Quality server

    Dear All,
    We have recently installed the Portal 7.4 servers.
    Currently we are having two servers Development and Quality.We have Configured NWDI using CMS and created tracks(Defined run-time systems as Development and Consolidation)  we are able to checkin the activities at NWDS , when we are selecting the component in the consolidation and on  click of  import we are getting the message as import finished, but the changes are not reflecting at the Quality server. i.e in earlier 7.01 version when we imported , the ear was deployed automatically in quality but it is not getting deployed in the new version 7.4
    Regards,
    Ramana.

    Dear Ervin/Jun Wu,
    Thanks for the Responce.
    As per the given link the track is configured  with out any issues (When we are clicking on Deployment in the Transport studio it is opening new tab like below and we are not having any errors when we click on Start deployment nothing is happening)
    http://hostname:50000/webdynpro/dispatcher/sap.com/tc~SL~CMS~WebUI/Deployer?BS=EPD_PRTADEV_C
    Please check the below log regarding deployment when we do the import
    SDM-deployment-notification  Log file.
    20141028125231 Info :Starting Step SDM-deployment-notification at 2014-10-28 12:52:31.0994 +5:00
    20141028125231 Info :Deployment is performed asynchronously.
    20141028125231 Info :Following DCs are marked for deployment (buildspace = EPD_PRTADEV_C):
    20141028125231 Info :
    20141028125231 Info :RequestId: 152
    20141028125231 Info :==> no resulting DCs for deployment
    20141028125231 Info :Follow-up requests:
    20141028125231 Info :
    20141028125231 Info :
    20141028125231 Info :Step SDM-deployment-notification ended with result 'success' at 2014-10-28 12:52:31.0995 +5:00
    Regards,
    Ramana.

  • Changes are not reflecting in the Quality

    Hi,
    These are standard SAP Components. I have imported the ESS and MSS Packages.
    Actually 3 Development Components are using in my application (Tra,TraTri and TraTre).Tra is the root DC.
    I have made  changes  to those objects and sucecessfully  build  without errors.
    After check-in all  activities  those activities are working fine in Development system.
    But those changes not refclecting in Quality system. So i was founded build log error in Consolidation.
    I was fixed the error in the Development system and build the components without build error.
    still now changes are not reflecting in the quality system.
    But out of 3 DCs(Tra,TraTri,TraTre) Tra and TraTre are working fine in Quality(changes are  reflecting) only problem in TraTri DC (changes are not reflecting in the Quality)..
    Please help me as soon as possible....Its very help full for me
    Regards
    Sudhakar Reddy A

    Hi Slava,
    very very thanks to you for the fast reply. but one thing in my side.
    When i release the activities after successful build, i export those changes and place them in the import queue of the consolidation system in the CMS.
    The export in the SAP NetWeaver Developer Studio packs all selected activities into a change request, and then places them in the import queue of the consolidation system.
    When the my system administrator imports this request into the consolidation system, the released changes are integrated into the DTR workspace of the consolidation system; the build server compiles the modified components.
    my system administrator findout build error in consolidation system:
    [wdgen] [Error]   .PersonnelNumberCheck: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
         [wdgen] [Error]   .PersonnelNumberCheck.I_Employeenumber: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Output [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
         [wdgen] [Info]    com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Output [supplyingRelationRole]: Supply function or supplying relation role missing (Hint: A child node which is not mapped must have either a supplying relation role or a supply function or one of its parent nodes must have a supply function.)
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.E_Name: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Et_Return [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
         [wdgen] [Info]    com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Et_Return [supplyingRelationRole]: Supply function or supplying relation role missing (Hint: A child node which is not mapped must have either a supplying relation role or a supply function or one of its parent nodes must have a supply function.)
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Type: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Log_No: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Field: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.System: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V1: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V3: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V2: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Log_Msg_No: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Number: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V4: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Parameter: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Id: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Row: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextValueAttribute EmployeeName [readOnly]: The context attribute has to be read-only. (Hint: As the mapped context attribute is read-only this attribute has to be read-only, too.)
    I was fix error in my development system with out any build errors. still now not working ...pls give me any suggestion.i dont have access to consolidation system.
    Regards,
    Sudhakar

  • Changes to subtasks are not reflected in the summary task

    I use Project Professional 2013.
    Changes to subtasks are not reflected in the summary tasks. This includes both work and actual work as well as % complete. The tasks are all auto scheduled. Is there a setting that I need to change?

    The only way I know to make that happen is if calculate project after every edit is disabled (See Options, Schedule tab).
    Does this happen in all project files, for other PCs near you and do you have SP1 installed for Project 2013?
    Rod Gill
    Author of the one and only Project VBA Book
    www.project-systems.co.nz

  • Model layer customization are not reflecting on sandbox.

    Hi 
    we are doing some changes to model layer in the seeded code, for the fusion apps.
    But our changes are not reflecting on fusion apps instance, even those are small validation changes, and these changes are going fine on sandbox (xml file),
    But when we are running the application these changes are not reflecting, do need to restart the server to get the model layer changes reflected.
    Is there any way to debug our changes in the fusion apps instance.
    Thanks
    Vipin

    But when we are running the application these changes are not reflecting, do need to restart the server to get the model layer changes reflected.
    Is there any way to debug our changes in the fusion apps instance."
    I am sure if you mean that it works after you restart the sever or you are asking if it will work on doing system restart.
    In any case, model layer changes are always done at GLOBAL layer and these changes only reflect after restarting the application. So, server bounce is not needed but application restart is required for changes to be picked up.
    Hope this helps
    Thanks
    Vik
    http://blogs.oracle.com/fadevrel

Maybe you are looking for