Business systems for Soap to file scenario

Hi Experts,
I am working on a soap to file scenario.Which type of business systems shall i create i.e Third party,As ABAP,As Java etc.Please suggest.
Thanks
Veeru

Hi,
Normally Business systems are created in SLD when you are provided with relevant system details. A business service is used in case of the system being an abstract unit.
In your case, it is better to go for Business service because you generally don't have such details for third party system.
Just go through this link for more understanding...
Difference between Business System and Business Service
Regards,
Chandra

Similar Messages

Business Systems for File to File Configuration

Good day.
We need to created two (2) Business Systems for our File to File Configuration.
Configuration Details:
SWCV must be attached to a Product.
Technical Systems must be Third Party.
Business Systems must be identified as an Application System.
Problem is that i don't know where to start. Can you help me.
Thanks.

Hi Abe
Pls. follow below steps -->
In SLD
1. Create the Product & Software Component for File Systems.
2. Create the Technical systems as Third Party & select the Installed Products for File systems accordingly.
3. Create the Business Systems & select the corresponding technical system.
In IR
1. Import the SWCV from SLD using Tools --> Transfer from SLD option
2. Create the Data Type & Message Type for source & destination .
3. Create the Inbound & Outbound message interfaces
4. Create the Message Mapping & interface Mapping.
In ID
1. Create the scenario
2. Using context menu of Business System. Assign Business system for Source & target systems
3. Create the Sender & receiver file adapter.
4. Create the receiever determination, interface determination
5. Create the Sender & receiver agreement.
- Lalit -

Doubt Regarding SOAP to File Scenario

Hi All,
I am trying to create a SOAP to File scenario .These are the following things I have done so far :
IR - 2 datatypes ( 1 for soap message and 1 for file message )
       2 message types for the corresponding messages
      2 Message interfaces, both are asynchronous
      1 message mapping
      1 interface mapping
ID- 2 business systems (1 to send soap, 1 to recieve file )
    2 communiccation channel (soap sender, file receiver )
soap sender adapter parameters - Interface Name - Message interface for soap message
                                                  interface namespace - scenario namespace
Then, i generated a wsdl file to expose the outbound message interface for soap message as a web service, url for message interface : http://host:port.XISOAPAdapter/MessageServlet?:service:channel.
After generating the wsdl file, i imported it in external definition
Could anyone plz. tell me, is this the right approach to creat this scenario ? how can I test this scenario?using altova spy ?

Hi,
The URL you have mentioned to genarate WSDL is not a valid one
http://host:port.XISOAPAdapter/MessageServlet?:service:channel.
Check the below valid URL
http://host:port/XISOAPAdapter/MessageServlet?channel=:service:channel.
You no need to import this to the Eexternal Definition as you already have DT,MT and MI, Any way this dosn't make any difference.
You can use SOAPGUI Tool to test:
->Create New Project -> provide WSDL you have genarated.
->Select Request and provide username and password and click the green button on top(Submit request to end URL).
Using altova spy:
Select SOAP Menu->Create New SOAP Request and provide your WSDL file and
SOAPMenu->Send Request To Server
Then you will get response..
Regards,
Prasanna

Multiple Business Systems for Multiple Receivers?

hi,
idoc > xi -> multiple receivers with xml payload
I have a scenario where i have to configure multiple receivers for each Supplier from an IDOC. All the receivers will be either HTTP or SOAP.
When the mapping would be the same for all the Suppliers but during configuration we have to determine the receiver based on an IDOC value to route the xml via HTTP or SOAP
For this to achieve do we have to create multiple business systems for each receiver?
If i create a receiver in the business service how can we determine the interface mapping in this scenario?
Thanks,
Tirumal

Hi Tirumal,
<i>For this to achieve do we have to create multiple business systems for each receiver?</i>
As you know,Business system is a logical name for the Techincal Systems, Theoretcially it is not required to create different Business systems for the each receivers.
Generally Business Systems are grouped/created based on the Business Process/Functionality/Type of Receivers etc.
So if you think, your each receiver is of type different type/process then create different Business systems.
It depends~
If you create Business Service, then you need to add your Message Interfaces explicitly into the Business Service( By open the Business Service->You can see the Sender/Receiver Interface tabs).
Hope this helps,
regards,
moorthy

Integration server as logical system in IDoc to file scenario

Hi,
Will we configure integration server as logical system in IDoc to file scenario or the RFC destination related to the port will be suffice?
For which logical system will the outbound partner profile configured?
Regards,
Gajendra.

Hello,
I feel that the RFC destination linked to the port is the key here.
Because the scenario (IDoc to File) works in both the cases:
Case 1: Used the logical system as Integration server
Case 2: Used the logical system related to the file (third party) in the SLD.
In both the above cases the RFC destination points to the integration server.
Is this the case that in the XI scenarios (where IDoc are sent) the logical system name in the partner profile is just dummy and has not much significance??
It is the port that matters and once the Idoc reaches XI the routing takes place based on the configuration in ID.
Thanks.
Regards,
Gajendra.

File to Web service (SOAP) to File scenario with out BPM in PI 7.1

Hi All,
I have scenario File to Web service (SOAP) to File scenario with out BPM.i am getting the below error:
1) Error MP: unexpected exception caught com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException: Value of key must not be null: ObjectId
2) Error ROB: error during processing: com.sap.aii.af.lib.mp.processor.ModuleProcessorException: Processing Error
PI server is 7.1 with SP:8
I have configured the scenario like this
1) 2 File channels - Sender & Receiver ,1 RFC channel - Receiver. We need to note that, the additional Module parameters need to be added only for sender File channel
2) Created Sender Agreement
3)Created Receiver Determination
4)Created Interface Determination
5)Created Receiver Agreement
Regards,
Ramesh

Hi,
Thanks for your reply!!
My Scenario is File to SOAP to File.
Configred modules in Sender channal below:
Prcessing sequence:
Number       Module Name                                        Module Key
1..........       AF_Modules/RequestResponseBean.......1
2..........       CallSapAdapter..........................................2
3..........       AF_Modules/ResponseOnewayBean.......3
Module Configuration:
Module Key                                       Parameter Name                                       ParameterValue
1                                                        passThrough                                            true
3                                                        receiverChannel                                       receiverChannel name
3                                                        receiverService                                        receiverService name
please tell any more confiration requered.
Regards,
Ramesh

Can we define two business system for a Client.

Hi XI Experts,
          We are facing problem regarding the Technical & business system in SLD.
          For deploying the readymade .tpz files , we have to define a technical system as ABAP in SLD.
          under this Technical system one Business system with specific name to be defined.
           But problem is that in Custmor's landscape they have already defined a Technical system & corresponding Business system for a specific client 250.
so while adding the new business system to existing technical system we are facing error:--
        Business system is alredy define for this client , choose another client.
    as a second option we defined a new technical system and when we try to define the new business system under this it also throw error:-
         Client is associated with Logical system name of existing business system.
        suggest the solution .

Hi Sudhir, I think in XI there is 1:n relationship between Technical sysytem and business system.
Means for a technical system we can define a no. of business system , but only limitation is that for a Specific client we can define a single busines system with a logical system name.
so i am looking for any way around. for my scenerio is to add a another business system to the client which has already defined business system.
suggest if any alternative solution is there.
with thanks.

JCO problem in SOAP to file scenario

Hey guys
i m doin a SOAP to file scenario and getting a JCO error in moni,the status of my queue in SMQ2 is SYSFAIL,when i check the TCP/IP connection in SM59 i find error in two places
AI_DIRECTORY_JCOSERVER and AI_RUNTIME_JCOSERVER .when i test connection for both of them i get the followin error "Error opening and RFC connection".
is this error dues to some server problem of something wrong in my scenario.?
the SOAP adapter in RWB is green.
i tried to unlock and delete the queue in SMQ2 but when i execute my scenario again,it gets SYSFAIL error.
thanx
ahmad

Hi,
If you restart the J2ee engine, it will work.
But The error may because of many reasons
-Might be because of lots of messages are to be processed simultaneously.
-Increasing the number of processes in VisualAdmin (VisualAdmin>JCO RFC Provider>AI_RUNTIME_<SID>) and see if that helps.
-This SAP Note may help u -709140.
Hope this helps,
Regards,
Moorthy

Error in SOAP to file scenario

Hey guys
i m doing a SOAP to File scenario and getting the following error.
<SAP:Stack>"COMMUNICATION FAILURE" during JCo call. Error opening an RFC connection.</SAP:Stack>
any idea where should i look ?
thanx
ahmad

Hey
i m still getting a red flag in MONI,the error is
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">JCO_COMMUNICATION_FAILURE</SAP:Code>
<SAP:P1>Error opening an RFC connection.</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>"COMMUNICATION FAILURE" during JCo call. Error opening an RFC connection.</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
i checked my mapping by copyin payload from MONI,its working fine.
thanx
ahmad

How To Create A Technical And Business Systems For Web AS ABAP ???

Hi Experts,
How To Create A Technical And Business Systems For Web AS ABAP ???
Please Let me Know All the Step-By-Step Process to Create ????
Points Will be Given
Regards
Khanna

Hi Sumit,
When U Told the thing that first time to execute the RZ70 and All i Did this in XI System
So I got An Entry for the Technical System for XI System.
Now i Deleted that and Executed RZ70 in R/3.
When I Executed RZ70, I got this Error.
<b> "RFC Call failed: Error Opening an RFC Connection "</b>.
Now I am Unable to see Any Technical System Under Web As ABAP. It's Showing Empty Now.
Please Let me know
Regards
Khanna

Testing of SOAP to FILE Scenario

Hi all
I have done with SOAP to FILE scenario.
--> while defining web service what we need to give in the URL????
--> How to test this SOAP to FILE scenario to see wheather it is working fine or not, what are the all options
Thanks
Dheeraj

Hi Dheeraj,
Definitely you can test it through the microsoft infopath tool.
steps to follow:
Executing wsdl File Using Microsoft Info Path
1.>Click on the design a from template
2.>Select the Web service icon and click ok
3.>Select the radio button u2018receive and submit datau2019 and click on next.
4.>Enter the path of the generated wsdl which u have saved and click next.
5.>Select the interface and click next
6.>Select the interface and click next.
7.>Double click on parameters.
8.>Double click on the parameter (which you want to send as request). Then click on the query field and click ok.
9.>Click next. And click Finish
10.>Now drag the query fields on the data fields to the left side. And click preview.
Please follow these steps I hope you will be able to test it.
Thanks and regards,
Nutan

Soap to File Scenario with BPM

Hi Guys
I have create my Soap to File Scenario using BPM to split the file on "Transformation step" into 7 files and it must save these files to my FTP Server, when testing on sxmb_moni I don't get any errors but when checking on the FTP server no files are created, and I understand that it should be showing all seven processing on the sxmb_moni, but that is not happening.
I have used the ForEach mode on my Block.
What could I be doing wrong.
Thanks!!
Yonela

go to runtime work bench to see communication channel, especailly the receiver channel.
To see what happened on it

Individual business system for ABAP and Java Stack

Hi All,
I need to send message from a system to XI via ABAP proxy and Java proxy. The sender's ABAP and Java proxy use the same message interface to communicate with XI. Should I create one business system for the ABAP stack and one for Java stack of the sender system?
Thanks + Best Regards
Jerome

Are you sending same message type from ABAP proxy and Java Proxy to XI?
If you have ABAP proxy, why do you need Java Proxy? Actually you cannot create any Java proxies on ABAP bases systems. What kind of system sender is? Java proxies are created for pure Java based applications.
Let me know if I didnt understand your question correctly. If so, please explain in detail why you need both proxies and what is your sender application.
--Archana

Problem by Maintaining a Business System for the Integration Server

Hi to all,
I have the following problem. I tried to change some Business systems configuration in SLD but accidentally deleted defined Business System for our Integration Server. After that I tried to create that business system again but I have the following error:
Integration Server already defined. There is already an integration server defined for the selected technical system. Please select role Application System.
Since than Im receiving the following error message when I try to refresh my adapter engine cache:
com.sap.aii.ib.server.abapcache.CacheRefreshException: Unable to find an associated SLD element
Do you know how can I define the Business System again currently I can't see it in SLD Business systems?
Ive also checked the IS URL (TR: SXMB_MONI) and it seems that its ok.
Regards
Naycho

Hi Naycho,
i think you have to clean up some sld rubbish
Go to SLD / Administration / Content Maintenance. Choose left side "all classes" or "landscape description" and right side "business system". Delete all entries you find for your business system, after that try to recreate it.
Regards,
Udo

Business system for legacy system

hi guys,
Can we create business system for legacy system ?If yes what is the use?
satya reddy

Hi,
Yes you have to create Business system for legacy systems..
It may be the Standalone java . or Third party system..
When you are doing some POC or such type of things create Business Services
also..
A business service represents an abstract unit for addressing message senders and message receivers. You can use a business service to group interfaces.
It is useful to use business services when configuring cross-company processes. Usually, the interface descriptions of the business partners involved are made publicly available. The system landscape is only partly known, however.
See the below links..
http://help.sap.com/saphelp_nw04/helpdata/en/ae/e3bd4f6b61e146ad1384954ecabb41/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ae/e3bd4f6b61e146ad1384954ecabb41/frameset.htm
Regards
Chilla..

Business systems for Soap to file scenario

Similar Messages

Maybe you are looking for