Business sytem

Hi,
can i assign one business sytem to two scenarios in XI-ID, secondly can i assign one technical system to 2 business sytem in SLD.
regards,
Gayatri.

thanks a lot krishna, i will change the message interface and interface mapping every thing in new scenario, may be it will work, let me tell you my project. instead of this primitive questions let me explain u every thing about project.
1, i need to add the two fields in existing logic, scenario is RFC to .Net., so i added 2 new fields, and mapped with rfc. done, then started trouble, i need to transport this to Prd, suddenly i realized that Prd name space is different than Dev name space in IR.the configuration scenario name also diff in ID. so what to do.
2, then first thing is to upload the xsdl and change the name space and download to Prd name space, they said no no, you have to develop whole new scenario not touching the old scenario. if it works we will get rid of old scenario slowly, the rfc pointers and business system will be same, so  i developed  a total new scenario(name space) i mean copy old scenario in to new with same message interfaces under same SWCV. when i want to change ID objects it's not allowing me to change, any way I'm not going to trasport id in to Prd, i will manually give the business system and every thing. but i want to make sure that in prod also i can copy the objects, so i think ur advice will work, while coping the scenario in IR i will change all the names. may be then in ID it will alow me to point to same Business sytem. i will try it. this is all about the  My XI project. I'm basically an ABAP, not learned any XI, that is the main reason for this kind of primitive questions.

Similar Messages

  • Logical System Name is defined for which type of Business Sytem

    hi
    Can some one helps me on this question and explaination.
    Logical System Name is defined for which type of Business Sytem ?
    a.Third Party
    b.Web AS java
    c.WebAs abap
    d.Standalone java
    Thanks
    Chandra

    Hi ,
    Logical System Name is defined for the Business System type WebAS ABAP.
    It is used in ALE scenarios when exchanging IDOCs between the particular system and XI.  The IDOC adapter will pick up the information from the SLD and it can then be used in the configuration in the Communication Channel (Adapter Specific Identifiers).
    Refer to this How-To Guide for more info
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c09b775e-e56e-2910-1187-d8eba09c7a4a
    Regards
    Manish

  • Creating a business sytem for flat file

    i am using proxy  to file scenerio, where i am using a FTP server , i dont know how to create a business sytem for that in sld please help me in this, and i have one interface running for IDOC to JDBC already , where can i use this Busniess sytem same for Proxy , which is R/3 ,in my case sender service
    thanking you
    Edited by: sridhar loganathan on Nov 5, 2008 7:45 AM

    Hi Sridhar,
    You need to create a third part system for File System i.e. FTP
    in case you are using the FTP server which is same as of yours JDBC system then u can use the same.
    and for Proxy side you can use the same BS you used for IDOC.
    Check these blogs for better understaning:
    ABAP Proxies in XI(Client Proxy)
    Along came a File Adapter, Mr. 'FTP' and Rest of the Gang
    Sachin

  • Re: Business sytem availability in Integration builder

    Dear Techies,
    Iam trying out one preliminary test scenario to map between two flat files.
    I had defined only business system sender at starting phase and after building the mapping scenario I again gone back to the SLD and created the business system receiver. But while iam trying to generate configuration part in Integration Builder Iam unable to find the receiver business system which I had created after mapping scenario.
    How to find the business system in configuration of integration builder.
    Thanks in Advance.
    Regards,
    Kiran

    Dear Hareen,
    Thanks alot for your reply.
    After cleaning the cache also iam unable to find the reciver businees system which i  had defined in SLD while assigning the business system in integration builder
    Thanks in advance.
    Regards,
    Kiran

  • Regarding Technical system or Business sytem

    Hello,
    What is the difference between Technical system and Business system. What makes the difference between these two. Already we are taking physically located system as Technical system, So instead of using technical system directly in the scenario, why should we go for Business system. Is there any technical information.
    Thank you

    Hi,
    Business system
    Business System is a logical rep of a Technical System. Technical system can be a physical machine, it have a IP. Can be a ERP, J2EE etc. A Business System is a logical term that we use into the Business Scenarios and represent these Technical System that we had created
    Technical system
    Basically Technical system is a physical system. That means a machine with certain machine mane. While on the other hand a business system is a virtual system which resides on technical system. So there is possibility that there can be more than one business system working on single technical system to make proper utilization of resources. Even though they a on same physical system there is no interference among them.
    So instead of using technical system directly in the scenario, why should we go for Business system. Is there any technical information.
    A very good question. Suppose if you are using the technical system directly in your scenario if any upgrade happens in the techincal system like if your ERP upgraded from 4.7 to ECC then you need to change every ever where you define your techincal system details. so for that purpose you define business system. If any upgrades happens you can make change only at the begning and then you are pointing it to business system it will take care every thing. Hope you understand
    Thanks
    Vikranth

  • SDL, transport and business sytem groups

    HI,
    i have test and qulity sap systems:
    BSD, XIT (test) and BSQ, XIQ (qulity)
    and also have 1 third party system, that is test and quality system at once. (HTTPCLIENT)
    i've created business system HTTPCLIENT at test business system group. how can i use the same HTTPCLIENT system as quality system group (or target system).

    Hi,
    Check these
    Create Transport Groups and Transport Targets
    http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
    Transport TS and BS From SLD
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
    Regards
    Seshagiri

  • About business system

    while creating a business system.
    there is the logical system name at step 2,
    there is the business system name at step 3.
    what do they feature respective and difference between logical system name and business system name?

    Hi,
    Business Sytem is the service  fro sender system or receiver system and Logical system is the system name where u want to send the data.
    suppose ur doing a snerio File to IDOC then that SAP Sytem logical system name SAP100 that sholud be given in Business system,if u dont give then data will not pass.
    Regards,
    Phani
    Reward Points if Helpful

  • PI 7.1 third-party business system and software component.

    Hi,
    I wish to know if it is possible to associate a third-party business system to a software version and therefore to a software component.
    This is importnat for me to know it applied to teh PI 7.1. I know that for abap and java this is possible.
    Any help will be well appreciated.
    Thanks in advance.
    Regards,
       Giovanni

    Hi,
    go to SLD.......go to Business system......click on new business system to create it.........then select your technical system for third party........then tell the sw component to be linked to the third party business system........then your third party business sytem will be linked to the sw component in PI7.1.
    Regards,
    Rajeev Gupta

  • How to make an entry in transport tab of business system in SLD

    Hi gurus,
    In PI, in SLD we maintain Business systems. In this business sytem if we go to have a detail look there is a Transport tab.
    What is this used for and how to make an entry here.
    I'm a basis person and i'm configuring XI for the first time. Kindly help.
    Regards,
    Priya

    1. Yes , you have to maintain target business system for the EACH BS in PROD system.
    2. Normally we do have 2 different sld one is explictly for production system. another one is for dev and QA system. Once u done creating all the systems needed for the project. we will copy all business from the dev server to production server. So production server will have all BS from Dev and  BS of production server.
    3. i am not sure about this. i dont have particular docuemnts . normally we assign target business system in transport tab. and in Intergration Directory we will export the business system from DEV and and import the business system in production system.
    Regards,
    Balaji
    Edited by: Balaji Pichaimuthu on May 19, 2010 9:06 AM

  • ABAP proxy client call PI with new client 120 in old business system

    Hi all
    We have a requirement to call PI from ABAP client proxy in synchronous mode via a CRM client 120.
    CRM client 100 is already configured in the Business system talked above but now we need the same business system to be configured for client 120 as well.
    My question is If we go to the SLD and
    |-> Click on Business System
    |-> Add new client 120
    Will it work or we need to do some extra configuration for communication channel.
    Also please let me know how to configure Integration Directory for sender agreement, Receiver Agreement and the communication channel.
    Thanks in Advance.

    Hi Naina ,
    We have a requirement to call PI from ABAP client proxy in synchronous mode via a CRM client 120.
    CRM client 100 is already configured in the Business system talked above but now we need the same business system to be configured for client 120 as well.
    My question is If we go to the SLD and
    |-> Click on Business System
    |-> Add new client 120
    > hope the technical entry of CRM is already in SLD . So you just need to make a business system entry . point the business sytem to the technical system entry with the right client here 120 .
    Will it work or we need to do some extra configuration for communication channel.
    > since sender is client proxy you don't need to do anything in case of receiver proxy you will be needing reciver communication channel of XI adapter type .
    for proxy based communication your application system(other than PI/XI) should be able to make a proxy call to XI or receive a call from XI .for this purpose you need to make some settings at R/3( or CRM level)
    For this check blog  : /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
    Abap proxies ( Client and Server proxies)
    Other steps i.e Interface determination/receiver determination are as usual .
    Regards ,

  • Connect one Business system with two Integration Server

    Hello,
    Can we able to connect one Business System with two Integration Server?
    I have one Business system (ECC 6.0 with the client 900) and it is already connected with PI 7.0 system.Can I able to connect the same sytem (with same client) with PI7.1?
    I want to do the HTTP Connection for ABAP Proxy for this two XI system with one business Sytem ?
    Is this possible ?Is there any work around solution there?
    Thanks.

    Hello ,
    This document describes about connecting with Two PI7.1 system using Application Server 7.1 and Application Server 7.0 SP14  .
    I want to connect same ECC system via abap proxy with two different PI system .One is PI7.0 and another one is PI7.1 system.
    Is this possible if i use Application Server 7.1 or Application Server 7.0 SP14  ?
    Thanks.
    Lakshmi
    Edited by: Muthulakshmi Pandi on Apr 16, 2009 11:48 PM
    Edited by: Muthulakshmi Pandi on Apr 17, 2009 12:21 AM

  • Message interface not exist in any software components on business system

    Hi Experts,
    In development-environment we have an interface (SAP->XI->3rd party system) with a conditional receiver determination (based upon a fieldvalue in RFC that comes from SAP,  "CONTROL_RECEIPE_DOWNLOAD"). This functions properly in development.
    After transport to production environment this structure is not known when I try to use it in the Integration Directory when creating a conditional receiver determination. Double-click on the interface does result in the startup of the integration builder, but the interface itself can not be found. The following error-message appears:
    "Error message  Message interface does not exist in any software components installed on this business system"
    All design-objects have been put into production and in Integration Builder the structure is available. In IR it is not...
    In development In the business system of the sending SAP system, I can see the interface. In production, I don't see any interfaces at the business system....so this might be the problem but how can I add an interface manually to a business system?
    Can anybody please help?
    Thanks in advance
    William

    Hi William,
    One more thing. In Production, check the technical system of source. SWCV in which you have developed your interface, should be installed on the source system. If this SWCV is not in list of your installed products & SWCV then add it. Update the business sytem in ID again & it will work. I guess you have done a typo by saying that objects are not available in IR but in Integration builder its avaliable.
    Regards
    Sushil

  • Diff between Business service and Business System?

    HI Experts,
      Pls let me know wht is the difference between business service and business system??
    when we will have to go for business service and when for business system??
    thnx in advance..
    New XI

    Hi,
    Difference between Business Service and Business System are :
    1) Business sytem require all details like login user id
    password require to create but in case of business service
    log in details does not require..
    2) A Business System  is purely for SAP-Systems and
    Business Service for Non-SAP systems
    3) Business service refers to any business applications where
    as the business system is defined in SLD(System Landscape
    Directory)
    4) When we have full details of application system the we are
    going to use the business system and it is created in the
    SLD so we dont have authorization to change the business
    system name.
    When we have partial details or no details of Technical
    system then we r going to use the business service. it is
    created in the ID. we can see and change it.
    5) A Business system is something that physically exists
    For example, if u want to download a file from a system
    ABC, by using file adapter and then want to update the
    content of this file into r/3 database by using RFc,then
    the system  abc and the r/3 will be ur business systems
    i.e. they physically exists. Business Systems are
    configured in SLD.
    Business service is mostly usedin B2B Scenario (cross-
    component),where you don't know the Business System of your
    partner. In other words business Service will be used only
    for those partners which do not have a physical landscape
    set up . Business servces do not have an entry in SLD.
    6) A Business Service is an Abstract Unit(which is not in
    System Landscape Directory) addressing Senders and
    Receivers of Messages.
    Physicals systems which use their communication channels
    and routing rules to communicate with other systems are
    called as Application Systems OR physical systems.
    7) In simple when u going for A2A integration then we define
    our Technical systems are Business system. If we r going
    for B2B integration then we dont know the complete
    information about the other end Business Landscape so, we
    configure it as a Business Services. Business system are
    created at SLD. Where as a Business Services are created at
    Integration Directory.
    8) Business systems:
      These are logical senders or receivers that exchange
    messages by using the Integration Server and that are
    entered in the System Landscape Directory.
    The business systems in the System Landscape Directory
    relate to a system landscape. The business systems of
    business partners are therefore not entered in the System
    Landscape Directory. To be able to address such business
    partners logically, use communication components in the
    Integration Directory. A business system is a way of
    specifying a communication component in the Integration
    Directory more precisely (business system component).
    Hope this will hwlp u..
    Regds,
    Pinangshuk.

  • SLD Business System with or with out Logical System If so, which Log system

    Hi
    I'm in confuse with the Logical System when creating a Business System in SLD.
    Our requirement is LEGACY -- PI/XI -- ECC.
    When I create Business sytem in SLD, I need to give a Logical System. Which system (Is it xi/pi or ECC ) Logical System to be provided?
    Thanks.

    >
    Pothana Yadav wrote:
    > Hi
    >
    > I'm in confuse with the Logical System when creating a Business System in SLD.
    > Our requirement is LEGACY -- PI/XI -- ECC.
    >
    > When I create Business sytem in SLD, I need to give a Logical System. Which system (Is it xi/pi or ECC ) Logical System to be provided?
    >
    > Thanks.
    if you are using File to IDoc scenario then need to define logical systems for both business systems you are going to create for
    i.e they will be used as sender and receiver partners in case of logical systems
    if need more details check the below blog
    /people/rajeshkumar.pasupula/blog/2009/03/16/unable-to-convert-the-sender-service-to-an-ale-logical-system
    check the same for how logical system are used in this case...
    note above will be helpful in case of only idoc scenario..else no need of creating logical systems even though target sysstem is ECC
    HTH
    Rajesh

  • RFC - Business Service

    Hi,
    I am using RFC adapter as the sender communication channel.  Can I achieve this using a Business Service or that a Business System is compulsory and needs to be configured in SLD.  Please suggest.
    Thanks.
    Krishnan

    Krishnan,
    That depends upon your clients specifications ie., when you have to use business service or business system.
    As michal suggested since it is RFC go for business sytem.
    Regards,
    ---Satish

Maybe you are looking for

  • Passing value of View Attribute from standard page to custom page

    Hi everyone, I have a custom page which needs to be called from a standard page. Now this custom page is based on some parameters whose value will depend on the dynamic selection by user. So how to get the currently executed value from VO. For ex: Ve

  • Converting Music on X-Fi Fatal

    Hi guys, I purchased my new X-Fi card last week and boy is it amazing but I have one problem I don't know how to sort out. I have a load of Mp3 files on my computer and would like to burn them on disc to play in my car. I want to know if its possible

  • Photos taken on my iphone are white/blank?

    I'm having trouble viewing the photos I've taken as well as my sister's Iphone. What happens is the photo are there but there are white and are white on the photo stream but when you access the photos through instagram the photos can be viewed. Why a

  • Newbie Question: Gererating a mapping xml file

    How is castor used, if even, to generate the mapping xml files from the classes generated by castor from an xsd? I have a(n) xsd that has many complex types and this called for the generation of many castor classes from that xsd...so, using these cla

  • Modal Form between the Form Events

    I create a modal form which is like the message box but with a textbox in it. What i mean here is, the modal needs to hold the form event while it's adding an Sales Order record. I have tried the Modal Form method as shown in SDK Sample 12.ModalForm.