Business Warehouse - Repair infoObjects during transport

Dear all,
I am transporting InfoObjects from BW Development server to BW Production server. Upon collecting 2 infoObjects (0GL_ACCOUNT and 0RC_ACCOUNT) and creating transport request, it results in a notification ' Carry out repairs in non-original system only if they are urgent' . It lets me create a new transport request but upon release, these InfoObjects do not get transported to BW production. They are still in-active.
In se09, transport type is 'Repair'.
These (and dependent) infoObjects are Active in DEV. I have tried using RSRV to repair, but how to find out which InfoObjects need to be repaired?
Any suggestion would be helpful.
Regards

Hello Abhishek,
I have performed these steps, which results in no errors.
The problem is, as I mentioned in my question, that the request is of 'repair' type and and when I expand the column for InfoObjects in se09, I dont get the list of IngoObjects I collected for transport.
Screen shot is attached for reference.
InfoObjects collected for this request were:
0GL_ACCOUNT
0RC_ACCOUNT
0MEASURE
0SEM_POSIT
0SIGN_REV
0SEM_POSCAT.
In se09:
Regards
Ather Iqbal

Similar Messages

How to invoice costs when damage occurs during transportation

Hi,
If there is damage during transportation such as loss, accident..., we have to create an invoice to the shipping company with a cost based on the weight of the damaged product for insurance purposes.
Have you ideas to set up this process in SD 4.7 because we want a link between the delivery or the order and the invoice created for damage.
Thanks
Jean Luc

Hi Jean,
When the goods get back to the warehouse, we treat this process in Returns which u r quite aware.
You can use the below scenario.
Say, the customer did not return the goods back may b bcause of the cost of sending the goods back involves more money in such a case he informs the business abt the damage of goods. in such scenerios we create a credit memo request w.r.t invoice then we give credit note(invoice) here no returns delivery is required as we have nt received any goods physically from the customer.

How to avoid hardcoding in RFC Lookup and JDBC Lookup during transport...

Hi All,
We have RFC and JDBC Lookups in some of our scenarios(JDBC to RFC synch)....Now problem is during transport of design objects, we have to change the business system and channel name manually in UDF in target environment....as it wont change although we define the target group in SLD.....we want to avoid this hardcoding.....one idea is we can use a business service inspite of business system and assign the comm channel to it.....this business service will be generic for all environment(dev,qua and prod)...and hence we dnt hav to hardcode....pls let me knw how to achieve or its possible or not....
waiting for ur inputs....
Regds,
Pinangshuk.

Hi,
For RFC lookup you might be doing hardcoding for Business system and RFC channel name.
Options are
1) Create value mapping for Business system. So you can maintain it in Directory part.
2) Keep the RFC channel name same for all system (Development, Quality, Production)
The details of channel can be changed in the Directory part of the respective system

Error during transport of info object

Dear all,
We are using BI7.0 During transport of the infoobject "0MAINTPOS" the following error is appearing.
Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Activation Mode)
Characteristic 0CM_CTAR: Unit 0UNIT_DIM no allowed in compounding
Characteristic 0CM_SHAR: Unit 0AREA_UNIT no allowed in compounding
Can anyone tell what has to be done to get this error solved.
Regards,
M.Magesh

MM,
Please refer
Re: inactive info objects in BI Content
Re: Unit no allowed in compounding
Hope it helps.

Benefits of SAP Business Warehouse Reporting compared with the Query-tools?

Hello experts,
I've been creating reports with SAP Query tools, but been faced with few problems. First of all, there are restricted possibilities in terms of joining tables, and thus I cannot include all the data required for the report.
One solution for this would have been to create separate queries and join the data together in Excel. The problem with this is that there exists no common field that would make sense as for a selection criterion. If the selection criterion is different in different queries, there is the danger of combining false data together, which would eventually result with distorted data.
So I was wondering, could anyone briefly tell me if SAP Business Warehouse reporting would solve these problems? And what other benefits would it provide compared with the SAP Query? I'd urgently need to know if it would be a beneficial investment for the company, since I haven't found solutions for the problems occurred in the creation of reports.
Thank you in advance for you help!
Maria

The answers are yes - and thousands of companies have gone down this route
Puttingin BW is a strategic aim of the comapny and not to be thought about and discussed in a BI forum such as this
The costs of implementation and hardware will no doubt make your eyes water.
To be quite honest SAP BI is a "no brainer" as most of the new e-SOA and new R3 modules reply on BW for their reporting needs

Diff b/w Data warehouse and Business Warehouse

Hi all,
what is the Diff b/w Data warehouse and Business Warehouse?

hi..
The diferrence between Datawarehousing and Business Warehouse are as follows.
DataWarehousing is the concept and BIW is a tool that uses this concept in Business applicaitons.
DataWarehousing allows you to analyze tons of data (millions and millions of records of data) in a convinent and optimum way, it is called BIW when applied to Business applications like analyzing the sales of a company.
Advantages- Consedering the volume of business data, BIW allows you to make decisions faster, I mean you can analyze data faster. Support for multiple languges easy to use and so on.
Refer this
Re: WHAT IS THE DIFFERENCE BETWEEN BIW & DATAWAREHOUSING
hope it helps...

Error during Transporting ID objects in PI 7.1

Hello Experts,
I am facing error during transportation of ID objects MY PI is 7.1 version In IR i have exported SWCV it generated .tpz file but in ID if am exporting it is throwing error
Export failed:Internal error during pvc call:Parameter version Specifier or version has the invalid value null
Please suggest me where would be the error any help is highly appreciated
Regards
Praveen

HI,
Problem is with all the folders in Integartion Directory while exporting objects from PI DEV it is throwing error like
com.sap.aii.utilxi.misc.api.ResourceException: Export failed: Internal error during pvc call: Parameter versionSpecifier or version has the invalid value null
     at com.sap.aii.ib.server.transport.impl.utils.PvcUtils.throwRootCause(PvcUtils.java:86)
     at com.sap.aii.ib.server.transport.impl.utils.PvcUtils.createPropagationList(PvcUtils.java:58)
     at com.sap.aii.ibdir.server.transport.impl.service.DirTransportServiceSeImpl.createExportVersionset(DirTransportServiceSeImpl.java:98)
     at com.sap.aii.ib.server.transport.impl.service.TransportServiceImpl.exportXiObjects(TransportServiceImpl.java:655)
     at com.sap.aii.ib.server.transport.TransportServiceBean.exportXiObjects(TransportServiceBean.java:317)
     at sun.reflect.GeneratedMethodAccessor2467.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:592)
Regards
Praveen
Edited by: Maareddy Praveen Reddy on Nov 1, 2011 11:59 AM

Long DDIC Activation for Master Data Change During Transport

Good Morning Folks,
During transport of a change to a custom master data object to production, the data dictionary activation is taking a very long time and using a very large amount of space.
The change to the master data object was adding three additional navigational attributes. This master data is not time-dependant. The master data contains about 1.2 million records and has 49 active navigational attributes u2013 including the three new ones. The Data Dictionary activation is executing report SAPLRSDU for more than 8 hours and is using upwards of 52GB of temp filespace (of 92GB allocated) during this time. To the best of our knowledge, it looks as if it is trying to recreate or repopulate the /BIC/Pxxxx table of the master data. It looks like it's reading billions of records (probably the same 1.2 m records over and over.)
There are no errors in any logs that we can see.
Previous changes to this master data object have been successful, and reasonably fast. And the transport of this change from Dev to our QA environment was very fast.
We still need to get this change in, as well as additional changes that are dependant. Why would this take so long, and is there anything we can do to get this to run faster?
BTW: We are on 3.5 (but looking forward to NW7.)
Thanks, Brian

Brian,
Usually adding nav attributes would mean that the X and y tables get regenerated...
Also do you notice reads only on the P-Table or other tables which have this object as well..?
If it is only the P Table - try refreshing the stats for the same...

Portal Activity Reporting and SAP Business Warehouse

Hi,
Does anyone out there know if SAP has or plans in the near future to deliver Portal Activity Reporting content via SAP Business Warehouse?
I would have thought BW would have been the ideal solution to enable some "out of the box" Portal Content in terms of extracting the data from the tables used for the Portal Activity reports, and then extracting them to BW for slicing/dicing & Presentation.
The current standard Portal Activity reporting does not supply what we need. We don't want to spend time and money developing this ourselves if SAP has plans to deliver it in the near future.
Any news please?
Cheers, Phil G.

Hi,
Check this blog which tells about the future of Activity Reporting..
The Final Word (Hopefully) on the Portal Activity Report
John

Problem during transport

Dear All,
Now i meet a problem during transport my ABAP in dev to prod server. Not sure is BASIS or my problem.
The error is "Request after end mark"
One more question is for the transaction code STMS, the status for production server should be LOCK or IMPORT QUEUE IS OPEN? If it should be IMPORT QUEUE IS OPEN, how i going to do it cos now our status is LOCK?
Thanks for ur help....
regards;
jee

Hi,
The "Request after end mark" will be displayed due to the following:
Requests after the end mark are not imported during the next import. The end mark is automatically deleted only when the next import has completely ended. Afterwards, the requests can be imported. You can see the legend information in the following website:
http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a3847acc11d1899e0000e829fbbd/content.htm
However, as per your questions I understand that the TMS configuration is not proper. Can you check the r3trans and the transport routes/layers again and see what is missing?

Query on view cluster event trigger during transport

Hi SAP Gurus,
I would just like to ask if the subroutines set in events for view clusters would also get triggered upon transport.
We had created a function module which is meant to regenerate a dynamic program when changes are made to a particular table. We're planning to call this function module in a subroutine that is called during an event in the view cluster (set to "before saving the data to database"). However, we would also like for this dynamic program to be regenerated automatically once the table changes are transported to the test/prod systems. Thus, I wondered if setting up the event is sufficient, and that it would also be triggered automatically prior to saving the changes to the database during transport, or if we still need to set up XPRA for this.
Thanks!

Some events are triggered when exportingthe changed data,
- 10 After creating the change request header entries (E071)
- 11 After changing a key entry in the change request (E071K)
- 12 After changing the key entries in the change request (E071K)
which are suitable to add a XPRA entry in the request
But many events (AFAIK those without dialog) are triggered during import (and we can check if the program is called via transaction or import via flag VIM_IMPORT_MODE_ACTIVE, eg. do not execute a form which fill hidden fields like created by and created at.)
Regards,
Raymond

Inactive InfoObject after Transport

We modified an InfoObject and transported the change; however, our BWQ system still does not recognize the InfoObject has active. And the InfoObject is active in BWD.
Our BWD system has the automatic transport connection active; then we went back and manually assigned it to a transport using RSA1 (Before and After) grouping mode.

Yes it should not require a deletion of data. But can you tell me what the error message is?? It might be that you have to transport just the object first without turning on nav. attr and then send nav.attr turned in the next transport.
Let me know if you resolved it, or if you are facing the same problem.

Need for helps in Business Warehouse

Hihi,
I would like to request for experts out there to help me up on this problem:
Step 1 : From Business Warehouse, i tried to pull the records (infopackage) from ECC with the tariff code "abc123" -> failed
Step 2: I tried again by set the conditions to pull the records with tariff "abc123" and date : before april -> it is work!!
As per above description, it proved that the failure in data pulling is not because of the tariff code, does you all have any solution for me on this? I need this urgently.
[I confirmed the data for APRIL, MAY have no problem and in ECC (RSO2) - the function module do pick up those records (which didnt show up in BW site)].
Hope can hear from you all soon.
Edited by: MOPZ Narayanan on May 18, 2010 10:06 AM

Hello,
Are you getting any ST22 dumps while loading data? Please check ST22.
You may try to load data by reducing the data packet size. Go to(Infopackage) Scheduler -> Data Source. Default Data Transfer and reduce the packet size there. Also try loading it till PSA only and then load above.
It would be difficult to analyze why there is error for only 1 record but most probably it would be the packet size, so try reducing it.
Also go through the below forum discussions to further drill-down into the issue details:
[Caller 70 is missing]
[Caller 70 is missing]
[Re: Error Caller 70" is missing when loading delta to DSO]
Hope it helps.. All the best.
Regards,
Pratap Sone

Error message when processing in the Business Warehouse

hi everybody!!
this was the error i got.plz let me know the correction process.plz explain stepwise.
thank u,
jack.
Error message when processing in the Business Warehouse
Diagnosis
An error occurred in the SAP BW when processing the data. The error is documented in an error message.
System response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update

Hi,
This issue is in BI when you are trying to load data from one object to other Object
example: ods to cube
We need the Log information which you can find that in the monitor screen Status tab "Push button"
Regards
Hari

Basic difference in installing R/3 and Business Warehouse server

What is the basic difference in installing R/3 and Business Warehouse server. What are the files that we use in each case.

Hi,
Pls check service.sap.com/instguides
Eddy
PS.
Put yourself on the SDN world map (http://sdn.idizaai.be/sdn_world/sdn_world.html) and earn 25 points.
Spread the wor(l)d!

Business Warehouse - Repair infoObjects during transport

Similar Messages

Maybe you are looking for