BusinessObjects Edge 3.1 - Hardware Requirement

Hello Group,
I am looking to get Hardware requirement for BO Edge 3.1 server (Web, App, DS and DB).
Servers are VS and hosted in the cluster resources.
Thanks,

You'v just quoted the minimum requirements here and I would not advise that. For a start from the XI3.1 side, Tomcat and OS alone will need 1GB RAM, which leaves 1GB for the application. 4GB minimum in my experience.
You should really do some sizing of users, usage and report sizes - http://service.sap.com/sizing > Sizing Guidelines > Anlaytics and pick the XI3.1 zip file. You don't have to spend hours on it but do some background.
For DS, it will totally depend on how many developers and how much throughput and response time required. Again, anything less than 4 GB would be false economy I think.
As it's virtual you can start with 8GB for the application and test it - you can allocate more later. More CPU will help things along - I would start with 4 vCPU's.
30GB space is not enough by any means as you have patch space, file space for FRS and possible files for DS. I would allocate 100GB.

Similar Messages

Edge server role hardware requirements

I'm new to Exchange Server 2007 and am in the early stages of planning the installation and deployment. This server will be used in a company with approximately 25 users.
My plan is to use a one machine for Client Access, Hub transport, Mailbox, and Unified messaging.
What are the hardware requirements for the machine that will be running the Edge Server role? Are they different than the machine that will be running the other four roles?
Would 25 CALS be required for the edge server and 25 for the server running the other four roles?
Thanks

You will find all Hardware requirements here (all roles)
http://msexchangeteam.com/archive/2007/01/16/432222.aspx
All clients only need one CAL for all Exchange server
I don't even think that you need a CAL for the EDGE server
You do need an Exchange Server License for every server you have
Deli

Hardware for BusinessObjects Edge 3.1

Hello experts,
Is there any Hardware recommendation for Business Objects Edge 3.1 for 20 Users?
Is Fujitsu RX600 S4 suitable for this?
where I can get any information about the hardware requirement for my problem?
Regards,
Andriy Kabalkin

Please refer to supported platforms document (available in service market place) for finding the minimum hardware document and installation and other guides at http://help.sap.com/content/bobj/bobj/index.htm
Thanks
Subhodeep

Hardware requirements for BOE XI 3.1

Hello,
I am looking for the hardware requirements to install BOE XI 3.1, but could not find any information in Installation guide as well as deployment guide.
The information given is something like below, but if I click the link it will be redirected to SAP service market place.
================================================
System requirements
For a detailed list of supported environments and hardware requirements,
consult the Products Availability Report (PAR) document available on the
Business Objects support site http://support.businessobjects.com/documen
tation/supported_platforms. This document includes specific version and
patch-level requirements for web application servers, web browsers, and
operating systems. For information related to the planning of a
BusinessObjects Enterprise deployment, consult the BusinessObjects
Enterprise Planning Guide.
================================================
Where can I get the correct document?
Thank you in advanced!
rgs,
Hiroshi

Hi,
go to [http://service.sap.com/bosap-support] and navigate to Documentation->Supported Platforms->BusinessObjects XI 3.1
Keep in mind that what you see there are the minimum HW requirements. And if you are planing on deploying BOBJ on a virtual machine, make sure that it gets enough CPU and RAM and that the disk I/O on the host has a decent throughput.
Regards,
Stratos

The difference SAP BusinessObjects BI Suite and SAP BusinessObjects EDGE BI Suite

Hi all,
Would you please explain what is the difference of SAP BusinessObjects BI Suite and SAP BusinessObjects EDGE BI Suite..?

Key difference:
Edge BI Suite does not allow you to do clustering of nodes, but the BI Suite does. This flexibility is restricted in Edge - so it's a single server setup.
Both SAP BusinessObjects Edge BI and SAP BusinessObjects Enterprise share the same underlying platform and tools. The difference is that Edge BI is designed and priced for mid-sized organizations, and is therefore licensed differently.
SAP BusinessObjects Edge BI is licensed for both named-user licenses and concurrent access licenses (CAL). While named-user licenses are appropriate for users who are active in the system throughout most of the day, the concurrent access license provides an economical way to support casual system users. A single CAL license will typically support 5-10 users, depending on the type of usage they require.
While Enterprise (BI Suite) can be implemented for unlimited users across multiple servers and includes clustering and failover capabilities, Edge BI is restricted to a single server and a user count more appropriate for mid-sized organizations.
You can always upgrade to SAP BI Suite if requirement grows and easily migrate all of your BI content including users, groups, reports, dashboards and universes.
The decision now depends on your investment and the allocated budget. I hope this helps.

Product: BusinessObjects Edge Series 3.0 -- Error 2902. Operation ixfAssemb

Good Afternoon.
I want to upgrade XIR3 to XIR3.1 for enabling IIS+SSO with Active Directory.
But when I want to upgrade my system, I have the Following error:
Product: BusinessObjects Edge Series 3.0 -- Error 2902. Operation ixfAssemblyCopy called out of sequence.
Windows Server 2003 SP2 (Fully Patched)
BusinessObjects Edge Standard XI 3.0 Windows (working)
Patch I want to Install: 51036069.exe ,BusinessObjects Enterprise XI 3.1 FixPack 1.1 - WIN - INTL
Thanks in advance for your help

Hi All,
Please clarify my following doubt,
We are migrating from BO 6.5 to BO XI 3.1 intergrating with our application.
I want to use the COM XI 3.1 SDK for the Desktop Intelligence. I did some code changes in the previous 6.5 SDK which we already used.
Say, I changed the LoginAs() method to Logon() in the C++ file.When I tried to create the .dll file using Visual Studio 6.0, I got the following error,
'Logon' is not the member of Application class.
From this message, I understood that, still Application class of BO 6.5 was used and not BO xi and some libraries were also missing.
Please correct me, if my understanding is wrong.
Where can I get the BO xi 3.1 com SDK for DESKI? When searched in SAP portal, I get only the API reference and Developer guides.
Thanks.

Oracle EPM 11.1.2.3 Hardware Requirement and best practice

Hello,
Could anyone help me find the Minimum Hardware Requirement for the Oracle EPM 11.1.2.3 on the Windows 2008R2 Server? What's best practice to get the optimum performance after the default configuration i.e. modify or look for the entries that need to be modified based on the hardware resource (CPU and RAM) and number of users accessing the Hyperion reports/files.
Thanks,
Yash

Why would you want to know the minimum requirements, surely it would be best to have optimal server specs, the nearest you are going to get is contained in the standard deployment guide - About Standard Deployment
Saying that it is not possibly to provide stats based on nothing, you would really need to undertake a technical design review/workshop as there many topics to cover before coming up with server information.
Cheers
John

Questions on the Hardware requirement mention in the 12c installation guide

Hello experts,
I have a confusion on the Hardware requirements mentioned in the 12c installation guide where they mentioned as below.
RAM with ADP1, JVMD2 8 GB 12 GB 20 GB
1 ADP Manager is Application Dependency and Performance
2 JVMD is JVM Diagnostics
Question 1: what does this RAM with ADP or JVMD mean. is it just the additional RAM space required in the server or does is that special requirement ??
Oracle WebLogic Server JVM Heap 1.7 GB 4 GB 8 GB
Size
Question 2: What is this JVM Heap size ? how do we configure this in the server ??
Thanks in Advance for your Help.

Hi,
#1: It means if you also want to install ADP and JVMD, the total RAM required is a small (e.g. < 1000 targets), medium (e.g. > 1000 targets and < 10000 targets), large EM deployment (e.g. > 10000 targets) is 8 GB, 12 GB, 20 GB, respectively. That is the memory requirement for an OMS host.
#2: The heap size for the OMS java process. You can adjust the heap size by changing the -Xmx<heapsize> (see an example below) in the following file:
<middleware_home>/gc_inst/user_projects/domains/GCDomain/bin/startEMServer.sh
An example of OMS heap size setting of 2048 MB:
if [ "${SERVER_NAME}" != "EMGC_ADMINSERVER" ] ; then
USER_MEM_ARGS="-Xms256m -Xmx1740m -XX:MaxPermSize=768M -XX:-DoEscapeAnalysis -XX:+UseCodeCacheFlushing"
if [ "${JAVA_VENDOR}" = "Sun" ] ; then
if [ "${PRODUCTION_MODE}" = "" ] ; then
USER_MEM_ARGS="-Xms256m -Xmx2048m -XX:MaxPermSize=768M -XX:-DoEscapeAnalysis -XX:+UseCodeCacheFlushing -XX:+UseConcMarkSweepGC -XX:+UseParNewGC -XX:+CMSClassUnloadingEnabled -XX:CompileThreshold=8000 -XX:PermSize=128m"
Regards,
- Loc

PI 7.0 Hardware Requirements & Confirguration

Hello,
We are planning to install PI 7.0 on the AIX 5.3.x(64 bit) with database DB2 UDB 8.2.x.(64 bit) for a Sandbox environment.
I am new to the XI area. I need some small/detailed information regarding following requirements( from PI BASIS point of view)
1) Hardware requirements
2) Memory requirements
3)Any hardware or platform constraints for the AIX & DB2.
4) PI 7.0 Configuration.
5) Idoc Interfacing.
6) Architectural considerations for Integration server, Java AS, SLD etc.
7) Authorizations in XI
you can mail me on [email protected]
Thanks,
Dnyandev

<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b">Installation Guide</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm">User Roles in an XI Landscape</a>
The requirements depend on the operating system and the database used for the installation.
Go to http://service.sap.com/instguides -> SAP Netweaver -> Release 04 -> Installation -> SAP Web AS -> SAP Web AS 6.40 SR1 and Related Documentation -> Choose your database (Ex: Oracle ) -> Planning and Preparation -> Select SAP Web AS ABAP for Windows.
Look at Page 37, minimum RAM is 1 GB (because XI is Unicode), ABAP system 25GB.
You should check the same for Web AS Java also.
one more small thought...
You also need to find the how the end user will access your system. In case an end user access outside of the LAN (say via WAN or dial-up) using https, it will have additional requirements for your hardware as you will need compression enabled for improved response time for WAN. Adding compression or SSL may add additional hardware if you based your sizing based on LAN.
And also One easy approach is after you define your test case, run some load test on your QA/Staging system. Use the load test data and find out the hardware requirements based on load test. If your requirement is larger than the staging system, you may have to take a staged approach. In that case you roll-out the system to a certain number of users and monitor the system and plan for additional users based on the monitored results.
Also for RAM memory, HDD size you can check this document:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/unkown/sizing%20guide%20-%20sap%20xi%203.0.pdf
Also go through these links...
/people/susanne.janssen/blog/2005/06/09/efficient-sap-hardware-sizing-quick-sizer
http://service.sap.com/quicksizing

How to determine the hardware requirements based on the Services' payload

hello,Guys
i am wondering if i can calculate the hardware requirements based on the services' payload ?
what factors should i consider when to determine the hardware requirements?
is there any documents related to my questions? ;)
Thanks
Regards
Wen

Payload size is not the only factor while determining size of the system (h/w). You need to consider number of services, nature of services (sync/async), payload size, frequency of messages (load), peak load value, security constraints, performance requirements etc..
You may contact your local Oracle Sales Representative/ Oracle Support to get help in determining size of the system. They will provide you a sizing questionarre and on the basis of that they may suggest sizing as well (Oracle has an internal tool for proposing sizing)
Regards,
Anuj

Hardware Requirements to get Satisfactory Resolution and Reconstruction from a Kinect V2 Scan

I am new to the Kinect for Windows V,2 (KFW2) Sensor, and as a prospective hobbyist
I am finding it difficult to determine the ”best for me” hardware requirements to acquire a satisfactory resolution and reconstruction from a scan to use in a 3D printer.
Please excuse and correct any mistaken impressions I expose in the following overview of what I have learned so far.
It seems that the measure of success to achieve my goal is to achieve 30 Frames per Second (fps) using applications such as Fusion Explorer and 3DBuilder while making a acan.
After watching many video demos I have determined that the stated minimum system requirements published by Microsoft are focused on just getting the KFW2 sensor to actually “work” and have a mesh constructed regardless of quality. Beautiful models have been
build using these applications, but in many of them I have heard both explicit and implicit comments that the computer used was much more capable than the stated minimum. In fact, in one such video the Microsoft presenter said words to the effect that “…we
have some high-end computers here but you need more than that to get good results in real time...” In many cases a Surface Pro 3 was somewhere in the scene. Well I am using a Surface Pro 3 i7, and I do not get satisfactory results.
So my question is, “Has anyone achieved a frame rate of 30 fps with Fusion Explorer and/or 3D builder? If so would you mind sharing the make and model of the computer you used, or the specs of the components you used (CPU, GPU, USB 3.0 controller, etc.)
if you built your own custom computer.
Thanks in advance
jperry

Hi JPerry,
I have a laptop with a 4GB 680m and a intel i7-3820qm (USB 3.0 eXtensible) and get a solid 30 fps fusion which takes around 60% GPU load with a 640 vox/m 256x256x512 grid. FPS drops to 17-20 when I increase the numbers to 768 vox/m, 512x512x768 grid.
On my Surface Pro 3 256GB i5-4300U I can get a decent 20-25 fps with 384 vox/min 128x128x128.
Fusion is very memory intensive, hence the frame rate dependency on volume size. I think in the original Fusion paper they mention that each voxel element takes up 32bits of memory so for 512x512x512 it takes up 512MB of GPU memory.
I would say anything with 1.5GB of GPU memory, later than a (desktop) nvidia GTX 660 (or AMD equivalent) should get you a solid 30 fps unless you use huge volumes, then I would consider using some of the fusion alternatives such as Voxel Hashing or KinFu
Large Scale.
http://www.graphics.stanford.edu/~niessner/niessner2013hashing.html
http://pointclouds.org/documentation/tutorials/using_kinfu_large_scale.php
Although you may have to do some work getting those working with the v2.

Correct Hardware Requirment for Educational Purpose

Goal:
Buy a new hardware for SharePoint development.
Purpose:
Increase my knowledgein SharePoint development. Today. I'm a junior SharePoint developer. I have experience in dot.net deveopment but not in SharePoint development.
Problem:
1.
Is Hardware requirements—database requirement below enough?
2.
Which software requirements I should use?
- Single server with built-in database,
- Server farm with a single server in the farm or
- Server farm with multiple servers in the farm
for a educational purpose. Each of these has different hardware requirement. (http://technet.microsoft.com/en-us/library/cc262485.aspx)
Information:
I have consider buying a new desktop och laptop computer with following criteria.
laptop with hardware requirement:
16 GB RAM
Intel processor i7
Desktop with hardware:
24 GB RAM
Intel processor i7
I gonna install windows 2012, SQL server 2012, SharePoint 2013 in VM Player's environment.

For development purposes, if you leave out SharePoint Search, you can get away with as little as 10GB RAM allocated to the SharePoint + SQL VM (given you restrict SQL to 1 or 2GB memory).
If you need Search functional, then go no lower than 16GB for a SharePoint + SQL VM.
Also make sure you get a separate disk for the SharePoint + SQL VM, SSD if you can swing it, otherwise, in a laptop, a 7200 RPM drive minimum.
Don't forget that you also need a Domain Controller in your environment running Active Directory. This should not be the same VM as the SharePoint server, but rather a separate VM (for many reasons). This VM can be small, with as little as 512MB RAM allocated
to it.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Guidelines on Hardware requirements for PeopleSoft 9.2 / 8.53

Hi-
Customer is looking for a realistic numbers or guide lines or sample sizes which can be used as a basis for hardware requirements estimation.
Details like
Total IOPS requirements for system
no of SQL transaction issued per min by light, medium and heavy weight users
CPU & Memory requirement in app server per user
CPU & Memory requirement in web server per user
CPU & Memory requirement in prcs scheduler server per user
CPU & Memory requirement in Database (oracle) per user (tpmc requirements for the same sample set)
I couldn't find any document which has any of these information.
Regards,
DMAC

Nicolas-
I have seen the previous thread, as it was for 9.1 thought if we have any updated documents for Application 9.2 with the latest tools 8.53, we are planning for the upgrade and want to build the new hardware, Just want to make sure we have good hardware resources in place before starting the upgrade process.
Regards,
DMAC

Oracle 10G in Linux server Hardware requirement

Hi,
I need to know the Hardware requirement of Linux dedicated server which oracle 10g have to instal. I need the best configuration including RAM memory. Very Urgent. Can u pls help me.
Regards,
Rajesh

800643 wrote:
I need to know the Hardware requirement of Linux dedicated server which oracle 10g have to instal. I need the best configuration including RAM memory. The answer is: A banana.
The reason is: Because a motorcycle has no doors.
And this is as a valid answer as any other to your question. You can run Oracle 10g XE on a notebook. You can run Oracle 10g Enterprise on a 64 CPU HP Superdome. You can run Oracle 10g RAC on a 60 blade servers, each with 8 dual-core CPUs and 64GB RAM.
So what is the best configuration? That depends entirely on WHAT you are planning to do using the Oracle RDBMS product. And it should be a concern that your approach is thinking that Oracle RDBMS is like Microsoft Excel and you can quickly and easily determine am optimal h/w and RAM config for it. Oracle RDBMS is not a desktop product like Excel. You do not fit h/w to it. You fit h/w to your requirements - as you would fit your choice of Oracle products to use to your requirements.
Very Urgent.We do not do "+Very Urgent+" here. This is a volunteer forum - where paid professionals are providing free opinion, advice and recommendations. That is without any warranty and guarantee. In a forum that does not provide SLAs or escalation procedures.
You want "+urgent+" support? Then pay for it and use http://support.oracle.com

Hardware requirement for Implementing RF

Hi Experts ,
Our client is looking forward to implement RF in Warehouse ;Can any one let me know what are the hardware requirements ( Servers required ) to implement RF.
1. If they intend to use a Character based hand Held device.
2. if they intend to use a GUI Based hand held devices.
Looking forward for reply
Regards
Albert.

Hi,
If you are having the User Id to use the service.sap.com, you will find all the documentation related to RF, if you don't have the User ID, please check out the following;
1. Apart from SAP Server, you need to install the Telnet Server, if you are using the SAP Console.
2. If you are using the Third Party interface for RF Scanners, they will install the third party interface software instead of Telnet software.
3. Recommended vendors for RF are; Techlogix, LXE, Intermec.
4. You need to make sure about the Screen formats and the network coverage and the range for the Access points which you use in the warehouse.
Hope it helps you.
Aktar

BusinessObjects Edge 3.1 - Hardware Requirement

Similar Messages

Maybe you are looking for