BusinessObjects Portal Integration - iView Template Missing
Hello
I have installed my BusinessObjects for Portal as follows:
1. We already have BI 7.0 on SQL 2005 on BIDEMOSER SERVER.
2. Installed BusinessObjects Enterprise 3.1 , Crystal Reports 2008, SAP GUI 7.1 and SAP Integration Kit on this new server name : BODEMOSER.
3. We already have EP 7.0 on Oracle 10.2 on EPDEMOSER SERVER.
I have installed the BOE 3.1 and Integrated with the BI Server and imported the roles and all the functions are working fine between BO and BI.For Portal Integration i have transferred the masterview file from BODEMO SERVER com.businessobjects.pct.masteriview.par to the EPDEMOSER SERVER.
And it was uploaded in the EPDEMOSER SERVER System Administration--> Support --> uploaded successfully.And I have followed the SSO configuration as per te guide. And values in the Web.xml files are properly as per the guide.
After the uploading the masterview par file i could not able to view the iView template in the System.I have cleaned the cookes and all temp files.
As per the guide I have created an folde name BI_BO and SYstem name as BI_BO_DEMO.Now when I started creating a iView Template by right clicking the System name BI_BO_DEMO and provided the following parameters for each Property Category.
CRYSTAL Enterprise server:
Host Name of Crystal Enterprise Server : BODEMOSER.srv.com:8080
Path of Crystal Enterprise Server : /SAP
Protocol of Crystal Enterprise Server : http
User Management
Authentication Ticket Type : SAP Logon Ticket
Logon Method : SAPLOGON TICKET
User Mapping Fields
User Mapping Type
Connector
Application Host : BIDEMODER.srv.com
Gateway Host : BIDEMODER.srv.com
Gateway Service : sapgw00
Logical System Name : BIDCLNT001
Remote Host Type : 3
SAP Client : 001
SAP System ID : BID
SAP System Number : 00
Server Port
SNC Library Path
SNC Mode - Select -01
SNC Name
SNC Partner Name
SNC QOP (Security Level) : 0
System Type : SAP_BW
Trace Mode : 0
System Alias
Created a System Alias as : SAP_BW
And tested the connection where it gives as
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
Whether i should install the BO Integration kit in EP portal also or any Portal Inetgration kit is available.
Regards
Bala
Hi,
1. Whether Integration kit for SAP should be installed in EP Server also ( which has been installed in BO server for BI and the SSO for BI and EP STRUSTSSO2 also works fine.
- the portal is acting as the frontend for viewing content and yes there needs to be trust between your portal and your BW system
2. the connector parameter and the iview template object parameter as correct as per the distributed enviorment.
When i checked with portal; admin they asked doubt what should be crystal enterprise server ( BO) and the what is the server should connector parameter should have.
- the Crystal Enterprise parameter do not influence the connector properties and do not lead to the point that the connector settings fail. the Crystal Enterprise parameters are only relevant when viewing SAP BusinessObjects related content.
Make sure you connector settings work even without the Crystal Enterprise parameters first.
ingo
Similar Messages
-
Hi
I have successfully deployed the com.businessobjects.pct.masteriview.par in Portal
I had taken the PAR file from the installation KIT folder of SAP Integration KIT
I have ONLY deployed the PAR and deployment was successful
I am using SAP EP 7.0 SP21
After the deployment I can not see the BusinessObjects Integration Kit -iView template in the iView creation template
I have refresh the browser, logoff and login number of times, clear the browser cache and history also.
Any suggestion what I need to do to get the BusinessObjects Integration Kit -iView template
Regards
Janak MehtaHi,
Do check the below forums for more details:
Do not see BusinessObjects Enterprise Integration Kit - iView template
IView Template Missing
Hope this may help you.
-Noor. -
Outlook Integration - Snapshot templates missing when upgrade to 8.8 PL14
hello all,
We have a problem when upgrade from B1 8.8 PL10 to PL14, the snapshot template missing. We had no problems to generate snapshots in B1 8.8 PL10.
All the snapshot templates has been installed on <Servername>\B1_SHR\AddOn\Microsoft Outlook Integration\Templates\Default
And in the -GoTo meny- and select -create default templates- could not be started.
Grateful for all help.Hi Jorg,
I quote a solution for similar case but the solution is based on client PC :
OI: Failed to create snapshot template in client machine
Symptom
You start up Outlook integration Addon in client machine. When you want to create a snapshot template, you get an error that can not create it.
Other terms
SAP Business One, Add-on, Outlook integration, OI, snapshot template, Index, Host, U_Host, BOOSTP , failed to create
Reason and Prerequisites
The index on user defined table [@BOOSTP] is not right. It does not include column U_Host.
Solution
You can run below script to fix it,
IF EXISTS (SELECT 1 FROM CUFD
WHERE AliasID = 'Host'
and TableID = '@BOOSTP')
BEGIN
IF EXISTS (SELECT name FROM sys.indexes
WHERE name = N'@BOOSTPBOOSTPI1')
DROP INDEX [@BOOSTP].[@BOOSTPBOOSTPI1]
IF EXISTS (SELECT name FROM sys.indexes
WHERE name = N'BOOSTPI1')
DROP INDEX [@BOOSTP].[BOOSTPI1]
ALTER TABLE [@BOOSTP] ALTER Column U_Host nvarchar(200)
CREATE INDEX BOOSTPI1
ON [@BOOSTP](U_TplName, U_Language, U_CatID, U_Host)
IF NOT EXISTS (SELECT 1 FROM UKD1
WHERE tableName = N'@BOOSTP' and SubKeyId = 3)
Insert into UKD1 values('@BOOSTP',0,3,'Host')
END
ELSE
Print 'There is no U_Host column in @BOOSTP table!'
if the above solution can't solve it, log a message to SAP support.
JimM -
Iview Template missing for Webdynpro-Java application
Hi All,
I wanted to create an iview out of my webdynpro component . I followed
the steps given in the following document ---
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0c7b2f25-0c01-0010-f2a2-f8a65a9dcad9
But unfortunately i couldn't find any template to create iview from webdynpro-java
application . Can any one help me out ? Is there any customization for the same or
this feature is not available for CE7.1--Sneak Preview version ? Any suggestion will
be of great help to me.
Thanks and Regards
AshisHi Ashis,
please refer to thread
Has anybody created Iview from "Webdynpro Java" component in CE7.1 ?
and by the way...there is a portal included under ../irj
greetings jens -
Bi7.0 to portal integration using template installer
hi frnds,
i change my connectivity step to bi to ep 7.0
now i m using template installer for full bi installation
all the step are successfully completd.
when i am cheking with java based
Note 937697 - Usage of SAP NetWeaver BI Diagnostics & Support Desk Tool
http://XX:50000/irj/servlet/prt/portal/prteventname/HtmlbEvent/prtroot/com.sap.ip.bi.supportdesk.default
it gives me three error like
1.Validity (Fri Jul 25 08:00:00 IST 2008/Sat Jul 25 08:00:00 IST 2020) of J2EE certificate SAPLogonTicketKeypair-cert is different to validity (Fri Jul 25 02:30:00 IST 2008/Sat Jul 25 02:30:00 IST 2020)of imported J2EE certificate in ABAP system
2.Call ABAP->Java for function RSWR_RFC_SERVICE_TEST failed for destination 'ABI_BSE_EPT'
3.Call ABAP->Java for function RSRD_MAP_TO_PORTAL_USERS failed for destination 'ABI_BSE_EPT'
can any1 help me??
regards
vipul a kapadiahi bro,
i solve that problme
1.Goto TCODE u2018STZACu2019 and set the System Time Zone and Useru2019s Default Time Zone to india(whatever u want)
2. give the permission to portal folder's.u can find PDF for that using search string "How to configure permission for portal" in google.
give all the permission as PDF says.
give rewards points
regards
vipul kapadia. -
MISSING Template Selection - BusinessObjects Enterprise Integration Kit
Hello,
I have the "com.businessobjects.pct.masteriview.par" imported. According to the description should now when you create a new iView in the selection of templates "BusinessObjects Integration Kit iView template" is available. This does not work! I did not see this option available.
Can someone help me? I went in front after this documentation (C5)
http://wiki.sdn.sap.com/wiki/display/BOBJ/CreateBOEXI3.1IntegrationKitIViewTemplateintoSAPEP+Portal
Regards
J.V.
Edited by: Jana VOGL on Nov 9, 2010 1:23 PMHi,
the portal runs on a server. What is wrong? I have done everything exactly as documented.
Regards
J.V.
Edited by: Jana VOGL on Nov 11, 2010 8:13 AM -
Moved: Creation of new iViews not possible because templates missing
Hello,
sorry I moved this issue to "Portal Content Development"
Creation of new iViews not possible because templates missing
Regards
Alex
Message was edited by:
Alexander LepkaAlex,
I'd be curious to know what SAP says. We have the same problem. Not sure how/if we broke it, but we can no longer create iviews using the wizard. I opened an OSS msg a while ago, but did not get much assistance.
We have recently upgraded to 2004s and it did not resolve the issue as I hoped it would.
If SAP provides a solution for you, please post it.
Thanks,
Shelly -
Hi!
I am about to integrate SAP BI into SAP EP 7.0.
All the necessary steps with the program "RSPOR_SETUP" I already executed.
Unfortunately when I try to execute a Query on Portal I get the following error:
iView not found: com.sap.ip.bi.web.portal.integration.launcher
Can some one help me to solve this error?
Thank you very much!
regards
Holger Thomassonhi Thom,
Make sure that you have already installed the BI 7.0 web templates as per the oss note 990321.
If not, install the BI 7.0 web templates according the note. BI 7.0 templates are :
0ANALYSIS_PATTERN
0ANALYSIS_PATTERN_EXPORT
0INFO_CONSUMER_PATTERN
0ANALYSIS_PATTERN_ICP
0ANALYSIS_PATTERN_INFO
0QUERY_TEMPLATE_BROADCAST_PDF
0ANALYSIS_PATTERN_HEADER
0ANALYSIS_PATTERN_FOOTER
0ANALYSIS_PATTERN_FILTER
Web Item
0PATTERN_BARCHART_STANDARD
Thanks. -
Creation of new iViews not possible because templates missing
Hello,
I do troubleshooting to this problem but still didn't found a solution. Before this problem came up an creation of iViews were possible. I'm not able to reproduce what was changed since then.
I'm using an NW04s Portal SP09:
If I try to create a new iView I get no selection of different iView templates. The step 1 of Template selection shows the message:
"No templates to display. You are not assigned to any existing templates."
I checked the template folder in PCD and found my role has access to it and to the templates objects. I gave me super_admin role but nothing changed. I think the problem is maybe a configuration issue or something with wrong access rights (security zones?).
Please, do someone know what I could check next?
Thank you very much for every response.
Regards
AlexAlex,
I'd be curious to know what SAP says. We have the same problem. Not sure how/if we broke it, but we can no longer create iviews using the wizard. I opened an OSS msg a while ago, but did not get much assistance.
We have recently upgraded to 2004s and it did not resolve the issue as I hoped it would.
If SAP provides a solution for you, please post it.
Thanks,
Shelly -
BI System Integration using EP iView Template
Hi,
Can u plz provide me POC, step by step process of below 2 que.
1. BI System Integration using EP iView Template.
2. BI System Integration using Federated Porta
Thanks
PrakashHi,
select your workset or folder where you should create the iview. Right click, it show you context menu, put create iview. You will have any options, one is BI, select this option.
Best Regards,
Conrado
www.forosap.com spanish forums -
Unable to install the BusinessObjects XI Portal Integration Kits on shrepoi
Hi all,
I am attempting to install the following kit onto my sharepoint 2007 installation:
BusinessObjects XI Release 2 SharePoint 2007 Portal Integration Kit
Download BusinessObjects XI Release 2 SharePoint 2007 Portal Integration Kit - ZIP 5MB
My Sharepoint is fully up to date and is version 12.0.0.6335.
Each time i try to install, I get the message:SP3 Patch is required to install Sharepoint 2007 Integration Kit. I believe that this is already installed as whenever I try to install the SP3 Patch I get:
The expected version of the product is installed on your system.
I have checked and it looks to me that version 12.0.0.6335 is the most up to date and surpasses the SP3.
Can anyone assist?
Kind Regards,
GCan you confirm the version of XIR2 from CMC application -> settings tab.
XI R2 SP3 version start with 11.5 not with 12, please check you have installed the correct version of BOE.
Thanks,
Shivanand -
IView Template used when uploading role from R/3 to Portal
Hi all,
I was wondering what iView template is used when you upload a role from R/3 that contains Web Dynpro ABAP applications. I want to change some of the default parameters in the template, more importantly, close the Detailed Navigation panel on the left.
Hope this makes sense,
Thanks,
KevinHi Kevin,
From your explanation, it seems you can see the iViews in Portal role editor under Content Administration.
Under Content Administration
Open the Role for Editing
In the Editor, select the iview and Click on OPEN button.
Now, you should be able to see the properties of the iView in the Editor.
Please check for the property "Code link", which give you the details of the class or template in use.
Hope, this will help
Cheers!!!
Biroj -
Missing iView templates from creation wizard
I have just installed a test instance of EP based on Netweaver 7.3. When I try to create an SAP transaction iView, the template does not show up in the creation wizard. The template exists in the system, and seems to work in the preview window. How can I get the template to show up in the iView creation wizard?
Hi,
Check standard iView templates exists under Content Administration -> Portal Content-> Templates->iView templates. also check Permissions .
Please refer this forum:[ iView Wizard - Template Selection not getting Displayed|Iview Wizard - Template Selection not getting Displayed;
Hope this helps!!
Regards
Vijay -
Hi:
Is it possible to "schedule" a webi report from the portal iview?
In my case, I am able to create an iview and link the report ID with it. This lets me see the webi report. Upon clicking EDIT I can go to edit mode (as of now I am investigating the warning netscape.javascript.JSException, but still it works on saing OK) as well and even save it in the Infoview with a different name. Now I am interested in exploring if I can also schedule the webi to run a certain time of the day via Portal.
Any technical help on this would be really appreciated.
Thanks,
SudiptHi,
We will be publishing a Crystal Report, WebIntelligence report and one Xcelsius dashboard. The Crystal report we already have the mechanism for (as you know, since you wrote the book on it!). With the WebI and Xcelsius documents we would like to consider the following scenarios:
1. Publish them as actual, visible reports in the portal. IViews?
>>> The steps would be the same - it is just a different ID for a different object. Make sure you use the option BusinessObjects Enterprise from the iView template.
2. Publish them as hyperlinks in a list of reports
>> You would have to create your own little application offering that or you could use Dashboard Builder as well. Logon to InfoView, go to Dashboards > corporate dashboard > where you have the option of Navigation List and Viewer.
3. Link the portal to InfoView and use it as the presentation medium for the reports and navigation between the reports.
>> possible but you might want to open InfoView in a new window because InfoView is not "made" to run in a frame.
>> Did you look at the KM Integration ? sounds like it would solve lots of items for you.
Since these reports will be interactive and the possibility exists that the WebI report will have to "run on open", what SAP portal complications might that present? -
GRC 10.1 to Portal integration steps review
Dear All
Could you let me know the below points for integrating the Portal with GRC 10.1 is correct?
a. GRC Portal Plug-in is deployed on Portal
b. Check if you can find the Web Service in WS Navigator on your Portal
c. Go to "Maintain Configuration Settings“
Parameter 1022 and 1046 to be added for your portal connector
d. create SM59 connection to point to portal.
e. maintain connectors & connection types for portal.
f. maintain connection settings for portal.
g. maintain mapping for actions & connection groups.
h. run sync program - GRAC_SCHEMA_UPDATE
i. run rep obj sync.
j. run auth sync.
k. check table GRACUSER & GRACCRLCONN.
After doing the above my requirement is as below:
a. Create Access request to provision users in Portal system using ARM.
b. Enable GRC ARA & ARM links to show up in Portal screen (not NWBC) so that portal users can run risks analysis & raise access requests from portal than going into GRC NWBC screen.
let me know if i have missed any steps specific portal integration.
RajuHi Neeraj,
Thx for your reaction. This unfortunately will not do the job as pasting the URL in the notification template will make it static. The problem is that the URL inserted by default is a dynamically created one which holds a variable pointer to a workflow object id.
Now i am researching if a custom build portal redirect application will do the job. But there must be others having the same problem if you want the GRC iview in the portal to be the 'one-stop-shop' for your GRC users...
Cheers,
Jim
Maybe you are looking for
-
Line Items are getting rejected in Sales Orders
Hi, I am creating sales orders using ORDERS Message type and for this I am using the Standard SAP Inbound Function Module to create sales orders. Idocs are getting processed successfully and sales orders are getting created, but line items in the sal
-
Mail Server Hosted on outlook freely but services for same getting shut from 31 july 2014
Dear Sir/ Madam, My Mail Server Hosted on outlook freely but services for same getting shutting from 31 july 2014, i want to continue the same product please advice me to get the same, i got the mail from outlook is follow Dear Outlook.com Customer,
-
I have a new Android tablet and can't seem to get my itunes downloaded on it. How to I do it? I
-
Photo "name" (ie: DSC_0001.jpg).
Many of my photos have the same "name" (ie: DSC_0001.jpg). When I try to batch change them to a blank name so I can copy them to a DVD, I get a message saying that there is already a photo with the name DSC_0001.jpg! What am I doing wrong? I have tr
-
HT4864 iPad acting weird out of nowhere
I keep getting a server error when I go to check my email ? I tried resetting all the settings still nothing .it also will just restart out of the clear blue and next thing you know I'm at the lockout screen ! Can some one please help me ?