BusinessPartners Properties and BusinessPartners Groups with DTW 2005

Hi,
I want to use DTW 2005 to import BusinessPartners Properties and BusinessPartners Groups.
Can you help me?
I don't find these objects in the combo box?
Thanks

Hi Andrea,
I do not think it is possible to import BP Properties as they already exist and it is basically just the descriptions that need to be updated. You can import Business Partner Groups if you select oBusinessPartnerGroups in the drop down list.
Hope it helps,
Adele

Similar Messages

Error importing oBusinessPartners with DTW 2005.0.16

I can not import BusinessParters with DTW 2005.0.16. For objects like Items ... it works as usual. With oBusinessPartners the Source data is shown empty, resulting in 0 imports and in 0 errors. If I open the dialog "Maintain Interface" to see the field database, it is empty within the oBusinessPartners.
How can I correct this?
Thanks
Franz

hi all,
Franz is right with his interpretation: It is about participating in the Ramp-up program for SAP Business One 2007 A:
Customer upgrade projects will not be able to participate in the 2007 A Ramp-Up if PL23 (or higher) on SAP Business One 2005 A SP01 have been applied. This is because Enhancement Package content has been introduced with PL23 which, due to compliance rules that SAP must follow, SAP can only add to SAP Business One 2007 A once this new release has been assigned general availability status.
Necessary details for SAP partners can be checked at (as previously mentioned in this thread):
http://service.sap.com/~sapidb/011000358700000173412007E
Hope this clarifies,
Heike

How does schedule with RESTful API a Webi report for a group of users ("Schedule For" to "Schedule for specified users and user groups" with one or more users/groups)?

SAB BO 4.1 SP1
Does it have an RESTful API to schedule a Webi report with the parameter to specify a group of users ("Schedule For" to "Schedule for specified users and user groups" with one or more users/groups)?

Hello Ricardo,
have you try a call like this one ?
    <schedule>
      <name>"test"</name>"
      <format type=\"webi\"/>
      <destination>
        <inbox>
         <to>userId1,userId2,userId3,groupId1,groupId12</to>
        </inbox>
      </destination>
    </schedule>
Regards
Stephane

Error importing VAT Groups with DTW

Hello,
I have a problem with importing with DTW VAT Groups. The error I am getting is:
"" is not a valid value for field Category. The valid values are 'O' - Output tax and 'I' - Input tax. This error appears even if in my csv in the Category column I have set up O for outputs and I for imputs.
If i don't put anything in field Category, it imports them fine, but all of output type.
Am I missing something or this is a bug?
Thank you,

Irina,
The DTW uses the same properties as the SDK objects. If you look at the VatGroups object in the DI API help documentation for the SDK, you do not use an "O" or "I", you use and enumeration to signify whether the tax is for input or output depending on the document type. You will want to look at the VatGroups business object in the SDK help and specifically for the Category property the BoVatCategoryEnum Enumeration.
HTH,
Eddy

Customer and customer group with different credit limit.

HI All,
we have customers belonging to a group. Every single Customer of the group must have its own credit limit and the group must have another credit limit too. Example.
Customer 1: Limit u20AC 100.000
Customer 2: Limit u20AC 350.000
Customer 3: Limit u20AC 400.000
Group 1: Limit u20AC 700.000
I used the customer hierarchy and now each customer have the high-level customer "10000":
Group 1 = Customer "10000" (Account Group 0012)
so Customer 1 + customer 2 + customer 3 limit can not exceed limit group 1 (u20AC 700.000)
How can fix ?
Thanks in advance.
Antonio

thank you for your reply
in my system, each customer is paying, but the group 1 no. The credit limit is not shared but different. If CLI1 exceeds its limit, I lock the sales orders, but if an individual does not exceed the limit I have to check the sum of CLI1 CLI2 CLI3 exceeds the limit of u20AC 700,000.
example:
CLI1: Limit u20AC 100,000
CLI1: credit exposure u20AC 55,000
Group 1: Limit u20AC 700,000
CLI1 CLI2 CLI3: credit exposure u20AC 670,000
New Customer Order CLI1: value u20AC 35,000
The sales order is blocked because it does not exceed the limit CLI1 (100,000 u20AC) but exceeds the limit of a Group (700,000 u20AC)
Thanks
Antonio

Can not synchronize the SAP NW UME users and system groups with SSM

We have created a demo enviroment for a client demo.
In SAP NW UME:
1. Create the system group.
2. Asing the goup created to the admin user (pipadmin).
In Administrator's user interface:
3. Acces to Administration > Set System Defaults in order to synchronize user tables. The data informed in the fields are:
SSM Administrator = pipadmin
Cache directory = C:Program FilesSAPSSMInternetPubcache
Global cache setting = Enable
End point = <IP:port>
User name = pipadmin
pasword = ······
cache = Enable
Then we click on syncronize tables (Administration > Set System Defaults). The "Update compled" message is showed but users and application group don't appear in the Administration > Manages Application Groups.
Note: We tried to syncronize yesterday and we recieved the message: restart the SSM Extended listener.

Thank you for your answer Bob.
Yes, I restarted the SSM Extended listener after all the steps.
Do you know if there is another missing step?
Regards,
Santiago

Reg: Report on GR Returns and IR Returns with PI 2005.1 700

Hi,
   I would like to report on GR Returns and IR retuns from Purchasing Datasources i.e. 2LIS_02_SCL(total returns).
   I created GR with 101 movement and GR with 102 movement. I checked in RSA3, i could see data with Procecs Key 002. But, i don't see any entry with process key 006. <u>Does any body investigated how these process keys attached to document changes? am i missing some thing?</u> I can able to calculate Actual Delived Qty and Invoice Qty, but i could't able to calculate total GR and IR Returns?.
We are on ECC 6.0 and PI 2005.1 700 and BI 7.0 .
Does any body have any idea about this.
Note: as of now i don't want to look into IM for return quantity. we don't have any Plans to implement IM.
Thanks in advance!
Nagesh Ganisetti.

Chetan,
   Both notes won't help... as you didn't understood my Issue. I was able to get actual Delivered or Invoiced Qty or Values. 1st won't help in my Case (This note is for how to calculate Invoice or GR value with Current Exachnge Rate instead of Original Exchange Rate).
I did all the settings for Purchasing. Some reason i couldn't able to generate any Entry with Process Key '6' or '7'.
Any idea where these process keys attached to these Documents. I want to debugg this, as you know i need to debugg while filling setup tables.
I would be very happy if you can share any Document on BI Objects Naming Conventions (Query or Cube or any BI Object).
Nagesh Ganisetti.

Accessing the Permission,Properties and Subscription tab with Direct URL.

Hello,
I am trying to accessing the permission tab with direct url, but i could not able to find a way to access it.
we can access this permissions tab browsing through Details - > Settings -> Permissions , the similar way Details - > Settings -> subscriptions.
But i wanted to use a single(i.e direct url) which can open these tabs.
Could you please help me on this.
Thanks
Best Regards
Manoj K

Hello,
I have resolved this issue by myself.
You can access the subscription interface directly using the below url.
http://<hostname>:<port>/irj/go/km/details/documents?isp=subscription&Standalone=true&StartPage=StandaloneDetailsPage
or
https://<hostname>:<port>/irj/go/km/details/documents?isp=subscription&Standalone=true&StartPage=StandaloneDetailsPage
And for the properties interface by using the below url.
http://<hostname>:<port>/irj/go/km/details/documents?isp=properties&Standalone=true&StartPage=StandaloneDetailsPage
For the permissions interface.
https://<hostname>:<port>/irj/go/km/details/documents?isp=permissions&Standalone=true&StartPage=StandaloneDetailsPage

Home Network and Home Group with HH3

Can anybody help me with this. My families various computers (win 7 and apple) and access the internet OK but none can see the other on either the Network or on the HomeGroup. All have same workgroup name. The HH3 manager can see all the computers and their mac addresses but for some reason is not allowing them to communicate together. BT Broadband Help shows the wired computers and the pc that is running the help but none of the other wireless pcs.
Next step it to disconnect the HH3 box and plug in a DLink box I have but I would rather get the HH3 to work since I am paying for it. BT say that they do not support home networking!

If any are on wireless, I would check the firewalls to ensure they are not showing the wireless as a public network. I use Kaspersky and it always seems to set the wireless as public and therefore limits access/use etc.

Generate Excel which Shows ADUsers and his Groups in a Matrix with AllGroups

Hi There.
I Need an Excel table for managemet, which Shows the following:
The Colums should be named as Username ActiveDirectory and some Properties and ALL Groups which are availible in Active Directory
Each row should then contain Username and in the Column of Group an "X" or somthing else, if the user is in the Group - like a Matrix.
Username,Firstname,Lastname,Group1,Groups2,Group3,Group4...
Username1,Firstname1,Lastname1,,x,,x.. -- User1 is in Group2 and Group4
Username2,Firstname2,Lastname2,x,x,x,x... -- User2 is in Group 1-4
I thought about generating an Hashtable with all AD-Groups and a Hashtable with User and his AD-Groups, but I don't know how to match them.
Have anyone an idea?
Thanks.

Hi,
I would like to suggest you go through the below link:
http://bradkingsley.com/using-powershell-to-list-group-membership-from-active-directory-ad/
Please try the script in it.
Hope this helps.
Regards,
Yan Li
If you have any feedback on our support, please click
here
Cataleya Li
TechNet Community Support

Sending to a shared contact group with subgroups fail

Hello all,
I am hoping someone can help me with this one, as I have researched non stop and cannot find an answer.
SCENARIO:
Outlook 2010 (with all the latest updates)
Exchange 2010
Windows 7 x64
We are a group of 15 users. All 15 of us add a shared mailbox used for communications into our Outlook client so we can access and monitor the entire mailbox, including contacts.
When trying to send a communication to a Contact group that is in the shared mailbox contacts, it will work fine unless there is another contact group within that group (subgroup). The email will bounce back with the following error:
[email protected] #550 5.4.4 ROUTING.NoConnectorForAddressType; unable to route for address type ##
If you send to a contact group with a subgroup from your own local contacts, it works fine.
If you send to a contact group without a subgroup, it works fine.
If you log directly into the shared mailbox and send from there, it works fine.
This issue appears ONLY to occur when sending to a contact group that has a subgroup within it from a shared contact list.
Based on my investigation, it appears that Outlook is trying to look for the subgroups within the local contact list, not the location of the actual contact group itself. Perform the following steps:
Add an additional (or shared) mailbox to your Outlook profile.
In the shared mailbox contact list, create 2 contact groups. (Test 1 and Test 2).
Add Test 2 into the Test 1 group. In Test 2 group, create/add a contact. (This may easiest be done by the shared mailbox itself)
Ensure you are logged into your original profile, and Right click the Test 1 group and Create->Email.
You will notice right away if you expand the Test 1 group, it will show up Test 2 (Unknown) and if you try and double click Test 2 to see it's properties, it says it cannot find it. If you perform this same step while logged into the shared mailbox directly,
it is able to locate the contact.
Any information I have found on this bounceback references a bug where a link in an email who try to send to a contact using MAILTO instead of SMTP. However, this is not the scenario I am in.
It is currently not feasible to have everyone add all these contact groups into their own contact list, as these groups change all the time.
If anyone has any ideas how this could be fixed, or have maybe other suggestions of how to use and access groups with subgroups for communications without logging into the shared mailbox, that would be great. We are unable to login to the shared mailbox
directly anymore as we are doing away with shared passwords.
Thanks all

Hello,
How did you select the recipients when composing email? Did you click the To button and select it from the Address Book or use the auto-complete list? If you select from the auto-complete list, please try deleting the contact group from the auto-complete
list and then test again.
In addition, since the bounceback error is similar to the MAILTo bug, we may try to install the hotfix to take a chance.
http://support.microsoft.com/kb/2597052
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

How do i copy and print groups from my address book?

How do I copy and print groups(with contact information) from address book? I want to copy a group of contacts in list form that ideally I can paste into Excel.

I'm not sure exactly what you are asking. If you are coming from pre-Mountain Lion, then Address Book has changed to Contacts.
Open Contacts.
Select an Account in the group list, if you want the contact in a specific group. If Groups aren't showing, you can display them from the View menu.
Click the Add card button ( + ).
Enter the information for the contact.
If you need multiple entries for a particular field type, a new blank entry will show up below the one you are adding.
If you need other fields, use the Card menu to Add a new field type.
If you want to change the default fields available when you create a new card, choose Edit Template…
If you have sent emails to someone and you want to get that address to add to a Contact, use the Previous Recipients command in the View menu in Mail.
If you need to add a new Group, hover the cursor over the account name, and a + button will appear. Click it.

Field Symbols, Field String, and Field Group.

Hi,
Can you differentiate between filed symbols, field strings and field groups,
With regards,
Bharath Mohan B

Hi,
Field Symbols
Field symbols are placeholders or symbolic names for other fields. They do not physically reserve space for a field, but point to its contents. A field symbol cam point to any data object. The data object to which a field symbol points is assigned to it after it has been declared in the program.
Whenever you address a field symbol in a program, you are addressing the field that is assigned to the field symbol. After successful assignment, there is no difference in ABAP whether you reference the field symbol or the field itself. You must assign a field to each field symbol before you can address the latter in programs.
Field symbols are similar to dereferenced pointers in C (that is, pointers to which the content operator * is applied). However, the only real equivalent of pointers in ABAP, that is, variables that contain a memory address (reference) and that can be used without the contents operator, are reference variables in ABAP Objects.
All operations programmed with field symbols are applied to the field assigned to it. For example, a MOVE statement between two field symbols moves the contents of the field assigned to the first field symbol to the field assigned to the second field symbol. The field symbols themselves point to the same fields after the MOVE statement as they did before.
You can create field symbols either without or with type specifications. If you do not specify a type, the field symbol inherits all of the technical attributes of the field assigned to it. If you do specify a type, the system checks the compatibility of the field symbol and the field you are assigning to it during the ASSIGN statement.
Field symbols provide greater flexibility when you address data objects:
If you want to process sections of fields, you can specify the offset and length of the field dynamically.
You can assign one field symbol to another, which allows you to address parts of fields.
Assignments to field symbols may extend beyond field boundaries. This allows you to address regular sequences of fields in memory efficiently.
You can also force a field symbol to take different technical attributes from those of the field assigned to it.
The flexibility of field symbols provides elegant solutions to certain problems. On the other hand, it does mean that errors can easily occur. Since fields are not assigned to field symbols until runtime, the effectiveness of syntax and security checks is very limited for operations involving field symbols. This can lead to runtime errors or incorrect data assignments.
While runtime errors indicate an obvious problem, incorrect data assignments are dangerous because they can be very difficult to detect. For this reason, you should only use field symbols if you cannot achieve the same result using other ABAP statements.
For example, you may want to process part of a string where the offset and length depend on the contents of the field. You could use field symbols in this case. However, since the MOVE statement also supports variable offset and length specifications, you should use it instead. The MOVE statement (with your own auxiliary variables if required) is much safer than using field symbols, since it cannot address memory beyond the boundary of a field. However, field symbols may improve performance in some cases.
check the below links u will get the answers for your questions
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3860358411d1829f0000e829fbfe/content.htm
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/field_sy.htm
http://searchsap.techtarget.com/tip/1,289483,sid21_gci920484,00.html
Syntax Diagram
FIELD-SYMBOLS
Basic form
FIELD-SYMBOLS <fs>.
Extras:
1. ... TYPE type
2. ... TYPE REF TO cif
3. ... TYPE REF TO DATA
4. ... TYPE LINE OF type
5. ... LIKE s
6. ... LIKE LINE OF s
7. ... TYPE tabkind
8. ... STRUCTURE s DEFAULT wa
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See Cannot Use Untyped Field Symbols ad Cannot Use Field Symbols as Components of Classes.
Effect
This statement declares a symbolic field called <fs>. At runtime, you can assign a concrete field to the field symbol using ASSIGN. All operations performed with the field symbol then directly affect the field assigned to it.
You can only use one of the additions.
Example
Output aircraft type from the table SFLIGHT using a field symbol:
FIELD-SYMBOLS <PT> TYPE ANY.
DATA SFLIGHT_WA TYPE SFLIGHT.
ASSIGN SFLIGHT_WA-PLANETYPE TO <PT>.
WRITE <PT>.
Addition 1
... TYPE type
Addition 2
... TYPE REF TO cif
Addition 3
... TYPE REF TO DATA
Addition 4
... TYPE LINE OF type
Addition 5
... LIKE s
Addition 6
... LIKE LINE OF s
Addition 7
... TYPE tabkind
Effect
You can define the type of the field symbol using additions 2 to 7 (just as you can for FORM parameters (compare Defining the Type of Subroutine Parameters). When you use the ASSIGN statement, the system carries out the same type checks as for USING parameters of FORMs.
This addition is not allowed in an ABAP Objects context. See Cannot Use Obsolete Casting for FIELD SYMBOLS.
In some cases, the syntax rules that apply to Unicode programs are different than those for non-Unicode programs. See Defining Types Using STRUCTURE.
Effect
Assigns any (internal) field string or structure to the field symbol from the ABAP Dictionary (s). All fields of the structure can be addressed by name: <fs>-fieldname. The structured field symbol points initially to the work area wa specified after DEFAULT.
The work area wa must be at least as long as the structure s. If s contains fields of the type I or F, wa should have the structure s or at least begin in that way, since otherwise alignment problems may occur.
Example
Address components of the flight bookings table SBOOK using a field symbol:
DATA SBOOK_WA LIKE SBOOK.
FIELD-SYMBOLS <SB> STRUCTURE SBOOK
DEFAULT SBOOK_WA.
WRITE: <SB>-BOOKID, <SB>-FLDATE.
Related
ASSIGN, DATA
Additional help
Declaring Field Symbols
FIELD GROUPS
are used to hold/handle large amount of data when the internal table are not useful
we use EXTRACT statement, HEADER structure in them
see the example
REPORT demo_extract.
NODES: spfli, sflight.
FIELD-GROUPS: header, flight_info, flight_date.
START-OF-SELECTION.
INSERT: spfli-carrid spfli-connid sflight-fldate
            INTO header,
          spfli-cityfrom spfli-cityto
            INTO flight_info.
GET spfli.
EXTRACT flight_info.
GET sflight.
EXTRACT flight_date.
END-OF-SELECTION.
SORT STABLE.
LOOP.
    AT FIRST.
      WRITE / 'Flight list'.
      ULINE.
    ENDAT.
    AT flight_info WITH flight_date.
      WRITE: / spfli-carrid , spfli-connid, sflight-fldate,
               spfli-cityfrom, spfli-cityto.
    ENDAT.
    AT flight_date.
      WRITE: / spfli-carrid , spfli-connid, sflight-fldate.
    ENDAT.
    AT LAST.
      ULINE.
      WRITE: cnt(spfli-carrid), 'Airlines'.
      ULINE.
    ENDAT.
ENDLOOP.
FIELD STRING is nothing but a string with one row of records.
Reward points if useful
regards
Anji

Struts - Application.properties and ApplicationResources.properties

Java Guru's,
Could some one tell me the difference between Application.properties and ApplicationResources.properties and which one shd i use in my application.
Thank you in Advance ..

Name it whatever you want. All that matters is the part before the .properties extension matches what you put in the struts-config.xml:

<message-resources parameter="com.company.app.MainResources"
null="true"/>

<message-resources parameter="com.company.app.AltResources"
key="altResourceKey" null="true" />
// and have the files...
appdir/WEB-INF/classes/com/company/app/MainResources.properties
appdir/WEB-INF/classes/com/company/app/AltResources.properties
// and use them with the bean:message tag...
<bean:message key="some.main.key" />
<bean:message bundle="altResourceKey" key="some.alt.key" />The only thing that matters is that several Struts tags, like the <html:errors /> for ActionErrors will only use 1 message resource file. The html:errors tag can specify an alternate resource file, but all the error keys used for that html:errors instance must be in that same bundle. So usually I put all my error messages in the main one and if it's a large app, I put several other resource files for different areas of the app.

Update properties in BP Master Data with DTW

Hi all,
I've a problem using DTW in SAP BO 2005 A:
I'm trying to update groups in properties, related to BP's in BP Master Data.
I'm using the template oBusinessPartners/BusinessPartners.txt with fields:
RecordKey, CardCode, Property8 (that is the one I want to update).
I populated Property8 with Y but DTW gives me back following error:
Invalid Item Name 'Y' in Enum 'BoYesNoEnum'65171
Is it a type of field problem?
Thanks in advance
Rgds

Hi Federico,
To update a property via DTW the value you need to enter in the spreadsheet is tYES or tNO.
Regards,
Adrian

BusinessPartners Properties and BusinessPartners Groups with DTW 2005

Similar Messages

Maybe you are looking for