Buss system, buss service

I have a scenario IDOC - SOAP
i configured the scenario using Business system on sender side and business service on the receiver side
Now I am planning to move it to Quality...
Can I import it to Quality using CTS+ such a way that only the business system on the sender side would change its name in the Quality and business service name remains same?
Is it possible?
Nikhil...
Edited by: Nikhil A on Mar 2, 2010 2:29 PM

Hi Nikhil,
Business service remains same in all system...
you can change the business system in Q environment as per your naming conventions....
in order to change the same using CTS+ there is concept called Groups and target business systems ..which needs to be exist in your SLD before import...
then you can assign there the target business system in Q system for your Business system in D..
Hope this gives you some idea..if neede more details on CTS+ regarding this..search the SDN
HTH
Rajesh

Similar Messages

Systems in Service Registry

SDN Team,
I am also facing the same error
( Specified provider system is not published in the Services Registry).
when i am trying to create a Provider system .which is available in Service Registry....what could be the reason?and one more doubt on Service Registry how can i get systems in Service Registry?What to be done to get the systems in Service Registry?
Regards
Srikanth
Edited by: srikanth d on Dec 24, 2008 9:19 AM

hi Srikanth,
Please go through this artcle, it may help u .
[https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/501bd56f-a5a6-2b10-4fbf-a61a64055fe4]
Thanks and Regards

Getting error when trying to create Exchange Connector in System Center Service Manager 2012

Getting error when trying to create Exchange Connector in System Center Service Manager 2012
The connection to the server was unsuccessful. Please check the server name and/or credentials entered.
Additional Information: The server URL is not accessible or the user does not have permission to access it (message: The request failed. The remote server returned an error: (401) Unauthorized.
Warm Regards, Pramod Kumar Singh Manager-IT

Someone sorted out this issue by installing API 1.2 and copying the dll files to the service manager server ,service folder and replacing it with API 2.0 dll files.
Also, your question is related to SCSM, please post at SCSM forum if you have further question.
Juke Chou
TechNet Community Support

IPad air not recognized in Windows 7: Error: \SYSTEM\CurrentControlSet\Services\Bonjour Service\Parameters. Verify that you have sufficient access to that key, or contact your support personnel.

Hello everyone.. I recently bought iPad air and I am trying to connect it to my windows 7 notebook. And so I am trying to install itunes in windows 7. But I keep on getting the error message:
"\SYSTEM\CurrentControlSet\Services\Bonjour Service\Parameters. Verify that you have sufficient access to that key, or contact your support personnel."
I already did this: http://blogs.msdn.com/b/astebner/archive/2006/09/04/739820.aspx that was given in this thread:
https://discussions.apple.com/thread/1558225?tstart=0
But unfortunately I still get the error message during installation. If I ignore that and continue installation, iTunes is installed and seems to work. But my windows does not recognize my iPad. I read somewhere that iPad driver is in iTunes.
Please help... thank you very much.

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
iOS: “Not enough free space” alert when trying to sync
http://support.apple.com/kb/ts1503
You may need to delete iTunes on your computer and then reinstall.
How To Completely Uninstall and Remove All Traces of iTunes
http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
 Cheers, Tom

System.Web.Services.Protocols.SoapException When Accessing Reporting Services

Hi. I have inherited a client's mission critical database + SSRS project that I am attempting to migrate from 32-bit SQL Server Express 2005 + SSRS on a Windows Server 2003 to 64-bit SQL Server Express 2008 R2 + SSRS on a Server 2012 R2 Essentials.
While I am not skilled in SQL Server I am having to learn quickly(!) and have managed to migrate the database and web application (with little change, apart from the web.config) and it is working fine. I have also migrated the SSRS database and can open
the Report Manager and generate reports OK.
However, the database's web application fails with a "Server Error in '/' Application" when it is used to generate a PDF report, with this exception:
System.Web.Services.Protocols.SoapException: Server did not recognize the value of HTTP Header SOAPAction: http://schemas.microsoft.com/sqlserver/2003/12/reporting/reportingservices/Render
(full text of error message given below).
My research has thrown up a few references to this, with the suggestion of changing the SSRS endpoint used by the code from ReportService.asmx to ReportService2010.asmx. This does not help, though, and neither does using the ReportService2005.asmx or ReportExecution2005.asmx
endpoints.
If I open the endpoint directly in a web browser using http://<ip address>:<port>/ReportServer/ReportService2010.asmx then it displays a sensible-looking XML document tree (but no associated style info).
I'm not really sure about where to go from here. Can anyone help?
PS: Here's the full error page referred to above:
Server Error in '/' Application.
System.Web.Services.Protocols.SoapException: Server did not recognize the value of HTTP Header SOAPAction: http://schemas.microsoft.com/sqlserver/2003/12/reporting/reportingservices/Render.
at System.Web.Services.Protocols.Soap11ServerProtocolHelper.RouteRequest()
at System.Web.Services.Protocols.SoapServerProtocol.Initialize()
at System.Web.Services.Protocols.ServerProtocol.SetContext(Type type, HttpContext context, HttpRequest request, HttpResponse response)
at System.Web.Services.Protocols.ServerProtocolFactory.Create(Type type, HttpContext context, HttpRequest request, HttpResponse response, Boolean& abortProcessing)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: System.Web.Services.Protocols.SoapException: Server did not recognize the value of HTTP Header SOAPAction: http://schemas.microsoft.com/sqlserver/2003/12/reporting/reportingservices/Render.
at System.Web.Services.Protocols.Soap11ServerProtocolHelper.RouteRequest()
at System.Web.Services.Protocols.SoapServerProtocol.Initialize()
at System.Web.Services.Protocols.ServerProtocol.SetContext(Type type, HttpContext context, HttpRequest request, HttpResponse response)
at System.Web.Services.Protocols.ServerProtocolFactory.Create(Type type, HttpContext context, HttpRequest request, HttpResponse response, Boolean& abortProcessing)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: System.Web.Services.Protocols.SoapException: Server did not recognize the value of HTTP Header SOAPAction: http://schemas.microsoft.com/sqlserver/2003/12/reporting/reportingservices/Render.
at System.Web.Services.Protocols.Soap11ServerProtocolHelper.RouteRequest()
at System.Web.Services.Protocols.SoapServerProtocol.Initialize()
at System.Web.Services.Protocols.ServerProtocol.SetContext(Type type, HttpContext context, HttpRequest request, HttpResponse response)
at System.Web.Services.Protocols.ServerProtocolFactory.Create(Type type, HttpContext context, HttpRequest request, HttpResponse response, Boolean& abortProcessing)]
System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +413241
System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +300
AuditecSite.ReportService.ReportingService.Render(String Report, String Format, String HistoryID, String DeviceInfo, ParameterValue[] Parameters, DataSourceCredentials[] Credentials, String ShowHideToggle, String& Encoding, String& MimeType, ParameterValue[]& ParametersUsed, Warning[]& Warnings, String[]& StreamIds) +203
AuditecSite.RenderToPDF.RendertoPDF_PreRender(Object sender, EventArgs e) +1040
System.Web.UI.Control.OnPreRender(EventArgs e) +11143742
System.Web.UI.Control.PreRenderRecursiveInternal() +108
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3394
Version Information: Microsoft .NET Framework Version:2.0.50727.8009; ASP.NET Version:2.0.50727.8010
Steve.

Hi
Check SAP Note 701467 for error CX_INVALID_TRANSFORMATION
SAP Note 773330 Incorrect exception for CALL TRANSFORMATION
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_aba/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d373031343637%7d
Refer this link too
CALL TRANSFORMATION
may get some help
Regds
Nidhi

What is business systems and services?

Hi Experts,
What is business systems and services and where are they prefered? and tell me the diff between them...
Regards,
Mahakrishnan T.

Hi
Business System
1) Business system is a logical system, and there is an importance on physical existence of the system.
2) Also SLD entry is required.
3)It is generally used for SAP applications, this is just a general prinicple followed but not mandatory.
4)This is defined as part of the SLD and is a physical system whose parameters are well defined.
5(Business systems refers to the physical systems, for instance the R/3 system. You define the business systems in the SLD
Business Service
1) You use a Business Service, when you do not have the System details of the the partner system to which you want to communicate. i.e. you have not configured the partner system in SLD.
2) Business Service is an Absract Unit with Sender and Receiver Interfaces,In this case you need to explicitly add the message interfaces while doing configuration in ID.
3) It is generally used for NON-SAP applications, this is just a general prinicple followed but not mandatory.
4) This is not defined as part of SLD and whose technical parameters are not completely known.
5)Business service is used when the message is not addressed to a business system. It is used mostly in B2B scenarios.
Regard's
Chetan Ahuja

Unable to install Sun Java System MAPI Service Providers

I tried to install the outlook connector for Outlook 2003. I've got the following error message. It said that Unable to install Sun Java System MAPI Service Providers. I am using Windows 2000 SP3 platform
--- 2005/06/22 11:41 ---
11:41:26 [5365] Outlook version is 11.0.6359.0.
11:41:26 ERROR: [5501] Unable to find MAPI directory.
11:41:26 No directory "C:\Program Files\Common Files\System\MAPI\LANGID" with LANGIDs: 1033, 0, 1033, 1033, 1033, 1033.
11:41:26 [5475] TMP directory is 'C:\DOCUME~1\admin\LOCALS~1\Temp'.
11:41:28 [5362] Checking Windows version.
11:41:28 [5363] Windows version is 5.0.
11:41:28 [5364] Checking Outlook version.
11:41:28 [5509] Checking default mail client.
11:41:28 [5508] Default mail client is 'Microsoft Outlook'.
11:41:28 [5178] Verifying that Outlook is not running.
11:41:28 [5179] Trying to login to shared session.
11:41:29 ERROR: [5501] Unable to find MAPI directory.
11:41:29 No directory "C:\Program Files\Common Files\System\MAPI\LANGID" with LANGIDs: 1033, 0, 1033, 1033, 1033, 1033.
11:41:29 [5366] Checking whether Sun Java System MAPI Service Providers are installed.
11:41:29 ERROR: [5501] Unable to find MAPI directory.
11:41:29 No directory "C:\Program Files\Common Files\System\MAPI\LANGID" with LANGIDs: 1033, 0, 1033, 1033, 1033, 1033.
11:41:31 ERROR: [5351] Unable to install Sun Java System MAPI Service Providers.
11:41:31 ERROR: Unable to install Sun Java System MAPI Service Providers.
Anyone can help for this? Thanks

I have used this method, but the dog gone service does not return a started status. It just keeps saying starting even after the service starts.
Download sc.exe from ftp://ftp.microsoft.com/reskit/win2000/sc.zip and copy
it to system32
Open a command line, change to C:\Sun\AppServer\lib and run:
C:\winnt\system32\sc.exe create SJdomain1 binPath=
"C:\Sun\AppServer\lib\appservService.exe
\"C:\Sun\AppServer\bin\asadmin-pause.bat start-domain domain1\"
\"C:\Sun\AppServer\bin\asadmin-pause.bat stop-domain domain1\"" start= auto
DisplayName= "SunJava domain1"
1. I'm no fan of windows and I prefer Solaris or Linux
2. Windows should have this tool as a part of the OS so I don't have to go hunt for it
3. I guess this solution is better than no solution at all :)

System.Web.Services.protocol.SoapHeaderException

I created a web service using java, with NetBeans 5.0. I used sun application server. Then I create Microsoft C# web service client in order to connect to the java web service. When I connect it I got following Exception called , System.Web.Services.protocol.SoapHeaderException. JAXRPC Internal Server Header
Please give some idea to resolve this exception.
My Email is : [email protected]

Ok, from the looks of it you're calling the web service from within an SSIS package. Are you able to call the web service in a stand-alone C# console app and is the error just occurring in the SSIS package or not? If it occurs in both situations, continue
development in in the C# console app as this will make debugging easier. Also, in order to help you further, are you calling a web service under your control or not, and is the web service a WCF service or not?
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

System.Web.Services.Protocols.SoapHeaderException error in script task

HI,
My requirement is I have to create a XML of each row from a table and push one XML data of each row to a web services. This is a syncronous call to web services where it will send the response of each row XML.
The WSDL file is having a method called MATCHXML having 4 parameters namely ControlXML, BatchXML, Username, Password. I have created the ControlXML & BatchXML through code and storing into a string variable seperatly. The WSDL alos contains 4 input called
RequestUUID, ChannelID, ServiceRequestID & ServiceRequestVersion which has to be send to web services compulsory along with the method. In order to implement this, first I have added Web reference of the Web service URL into library, then invoked the method
to hit the web services. The code looks likes as below:
//Initiated an object of the class from the WSDL file
Matching match = new Matching
string result = match.MatchXML(controlXML,BatchXML,Username,Password)
Then, at the above line it display the below error:
SSIS package "HunterAutomation.dtsx" starting. Error: 0x1 at Generates XML file & Update variable: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Web.Services.Protocols.SoapHeaderException:
Mandatory field is not set in EAI_SOAPINPUT; Element -> Environment.eaiCommon.BTID, Environment.eaiCommon.Header.ChannelID, Environment.eaiCommon.Header.RequestUUID, Environment.eaiCommon.Header.ServiceRequestId, Environment.eaiCommon.Header.ServiceRequestVersion
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at ST_ae3b1e5eadb64fdba5040f4efa743458.csproj.Hunter.Matching.Match(String controlXml, String batchXml, String username, String password) in C:\Users\CPUTRACKINGAPP\AppData\Local\Temp\3\SSIS\377534961d7f4fdb91565f9366317fdc\Web References\Hunter\Reference.cs:line
93 at ST_ae3b1e5eadb64fdba5040f4efa743458.csproj.ScriptMain.Main() in C:\Users\CPUTRACKINGAPP\AppData\Local\Temp\3\SSIS\377534961d7f4fdb91565f9366317fdc\ScriptMain.cs:line 1307 --- End of inner exception stack trace --- at System.RuntimeMethodHandle._InvokeMethodFast(Object
target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle
typeOwner) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr,
Binder binder, Object[] parameters, CultureInfo culture) at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture) at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript() Task failed: Generates XML file & Update
variable Warning: 0x80019002 at For Loop Container: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of
errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. Warning: 0x80019002 at HunterAutomation: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised
(1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. SSIS package "HunterAutomation.dtsx" finished: Failure.
In order to solve the issue i have manual created the soap header code. Now Im not understanding how to send the soap header XML message along with the MATCHXML method. I am trying very hard to solve the issue from last 3 weeks but NO LUCK.
Could anyone please help me out on this and I'm already running out of my deadlines.

Ok, from the looks of it you're calling the web service from within an SSIS package. Are you able to call the web service in a stand-alone C# console app and is the error just occurring in the SSIS package or not? If it occurs in both situations, continue
development in in the C# console app as this will make debugging easier. Also, in order to help you further, are you calling a web service under your control or not, and is the web service a WCF service or not?
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Getting error System.Web.Services.Protocols.SoapException: Server did not r

I am trying to acces my web service using this code
Call call = new Call ();
SOAPMappingRegistry soap = new SOAPMappingRegistry();
call.setTargetObjectURI ("http://tempuri.org/");
call.setMethodName ("EarnNValue");
Vector params = new Vector ();
params.addElement (new Parameter("customer_id", String.class, "gauravbehl",Constants.NS_URI_SOAP_ENC));
params.addElement (new Parameter("channel_id", String.class, "C0002",Constants.NS_URI_SOAP_ENC));
call.setParams (params);
Response resp = call.invoke(new URL("http://203.199.76.2/api/earnnvalue.asmx"), "http://tempuri.org//EarnNValue") ;
if (resp.generatedFault ())
Fault fault = resp.getFault ();
System.out.println (" Fault Code = " + fault.getFaultCode ());
System.out.println (" Fault String = " + fault.getFaultString ());
else
Parameter result = resp.getReturnValue ();
System.out.println (result.getValue ());
out.println (result.getValue ());
and i am getting the the following error
Fault Code = soap:Client
Fault String = System.Web.Services.Protocols.SoapException: Server did not recognize the value of HTTP Header SOAPAction: http://tempuri.org//EarnNValue.
at System.Web.Services.Protocols.Soap11ServerProtocolHelper.RouteRequest()
at System.Web.Services.Protocols.SoapServerProtocol.Initialize()
at System.Web.Services.Protocols.ServerProtocolFactory.Create(Type type, HttpContext context, HttpRequest request, HttpResponse response, Boolean& abortProcessing)
Please help.
Thanx
GB

<%@ page language="java" import="java.util.*, java.io.*, javax.mail.*, java.net.*, org.apache.soap.util.xml.*, org.apache.soap.encoding.soapenc.BeanSerializer, org.apache.soap.encoding.*,org.apache.soap.*, org.apache.soap.rpc.*"%>
<%
try
out.println ("Starting");
System.out.println("heree");
Call call = new Call ();
System.out.println("here");
SOAPMappingRegistry soap = new SOAPMappingRegistry();
call.setTargetObjectURI ("http://tempuri.org/");
call.setMethodName ("EarnNValue");
call.setEncodingStyleURI("http://schemas.xmlsoap.org/soap/encoding/");
Vector params = new Vector ();
params.addElement (new Parameter("customer_id", String.class, "gauravbehl",Constants.NS_URI_SOAP_ENC));
params.addElement (new Parameter("channel_id", String.class, "C0002",Constants.NS_URI_SOAP_ENC));
params.addElement (new Parameter("category_id", String.class, "club",Constants.NS_URI_SOAP_ENC));
params.addElement (new Parameter("transaction_date", String.class, "16/07/04 14:41:20",Constants.NS_URI_SOAP_ENC));
params.addElement (new Parameter("parameter_id", String.class, "login",Constants.NS_URI_SOAP_ENC));
params.addElement (new Parameter("parameter_value", String.class, "1",Constants.NS_URI_SOAP_ENC));
call.setParams (params);
Response resp = call.invoke(new URL("http://203.199.76.2/api/earnnvalue.asmx"), "http://tempuri.org//EarnNValue") ;
if (resp.generatedFault ())
Fault fault = resp.getFault ();
System.out.println ("Something is wrong");
System.out.println (" Fault Code = " + fault.getFaultCode ());
System.out.println (" Fault String = " + fault.getFaultString ());
else
Parameter result = resp.getReturnValue ();
System.out.println (result.getValue ());
out.println (result.getValue ());
catch (Exception e)
System.out.println ("********Exception*******");
System.out.println (e);
out.println ("Ending");
%>

Azure System.Web.Services.Protocols.SoapException

I use a web service on a server and it works OK. Now I want to transfer my site to an Azure server. For now I created a free web site on azure to test it.
It is a Silverlight application that calls a service to create a report.
When I call this service I have the following error
error:
<?xml version="1.0" encoding="utf-8"?><soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><soap:Body><soap:Fault><faultcode>soap:Server</faultcode><faultstring>System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.ArgumentException: Parameter is not valid.
at System.Drawing.Graphics.GetHdc()
at C1.Util.FontSubSet.#e.#cA.#Kn(FontSubSet owner, String tableName)
at C1.Util.FontSubSet.GetFontTableStream(String name)
at C1.Util.FontSubSet.#TDd()
at C1.Util.FontSubSet.Init()
at C1.Util.FontSubSet.GetFontSubSet(FontKey fk)
at C1.C1Preview.C1PrintDocument.#ydd(String s, String fontName, Boolean fontBold, Boolean fontItalic, Boolean updateDocumentFonts)
at C1.C1Preview.C1PrintDocument.#zdd(String s, String fontName, Byte fontCharSet, FontStyle fontStyle)
at C1.C1Preview.RenderText.InternalResolvingFinished()
at C1.C1Preview.RenderObject.ResolvingFinished()
at C1.C1Report.Layout.RenderDirect(ILengthCacheProvider lcp, RenderObject ro, RenderFragment rf, Double x, Double y, Double width, Double height)
at C1.C1Report.Layout.RenderDirect(ILengthCacheProvider lcp, RenderObject ro, RenderFragment rf, RectangleD bounds)
at C1.C1Report.Field.#RLd(ExportFilter export, Layout layout, RectangleD bounds, String str, Boolean rtf, Double lineWidthTw, Int32 firstCharIndex, Int32 length)
at C1.C1Report.Field.Render(Layout layout, Double x, Double y, Boolean measure)
at C1.C1Report.Field.Render(Layout layout, Double x, Double y)
at C1.C1Report.Section.Render(Boolean keepPage, Group ownerGroup)
at C1.C1Report.Layout.#fMd(Section s)
at C1.C1Report.Layout.StartDoc()
at C1.C1Report.C1Report.RenderFirstPass(Boolean releaseDocument)
at C1.C1Report.C1Report.#fNd()
at C1.C1Report.C1Report.#dNd(ExportFilter filter, Boolean reuse)
at C1.C1Report.C1Report.RenderToStream(Stream stream, FileFormatEnum fmt, String idPrefix, String fileName)
at C1.C1Report.C1Report.RenderToStream(Stream stream, FileFormatEnum fmt)
at Gestion1.Web.RapportS.GetReportCommunique()
--- End of inner exception stack trace ---</faultstring><detail /></soap:Fault></soap:Body></soap:Envelope> `

Based on the provided stack trace it looks like you are attempting to run report tools from ComponentOne on the server.
The issue is caused by access to APIs that are restricted from use by Azure Web Site instances for security and performance reasons. The native GDI rendering methods are among these restricted APIs.
See the post from Jim Cheshire towards the end of this
post.
Until and unless these restrictions are relaxed (which they may not be) your options are to move the service to a Cloud Service instance, or move to another component that does not use native GDI methods to render.

System.Web.Services.Protocols.SoapException: CX_INVALID_TRANSFORMATION

Hi all,
i have a problem with a service.
In the "old" systems WITHOUT Soamanager the service works fine.
Now the service throws the following exception:
System.Web.Services.Protocols.SoapException: CX_INVALID_TRANSFORMATION:An exception with the type CX_INVALID_TRANSFORMATION occurred, but was neither handled locally, nor declared in a RAISING clause.The transformation /1BCDWB/WSS0071002102836497005 could not be executed at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) at C9X.ZWS_PASSWORD.ZUResetSapPassword(ZUResetSapPassword ZUResetSapPassword1) in c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files\ajaxenabledwebsite1\155921d1\5360ddf9\App_WebReferences.mlueh3hc.4.cs:line 49 at _Default.ResetUserPasswd(String sapUserName, String eMail, String sapLanguage, String sapSystem) in c:\AJAXEnabledWebSite1\Default.aspx.cs:line 326
I have configured the logical port in soamanager and i can't find the error....
Any ideas?
regards

Hi
Check SAP Note 701467 for error CX_INVALID_TRANSFORMATION
SAP Note 773330 Incorrect exception for CALL TRANSFORMATION
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_aba/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d373031343637%7d
Refer this link too
CALL TRANSFORMATION
may get some help
Regds
Nidhi

System Center Service Manager 2012 SP1 upgrade install error

I am trying to upgrade my SCSM 2012 front end app server to SP1 and am getting these failures in the log when it fails with the error "Service Manager is not in a valid state"
09:07:58:Could not find WCS portal web site in IIS metabase!
09:08:02:***ERROR*** Microsoft System Center 2012 - Service Manager: Microsoft System Center 2012 - Service Manager is not in a valid state.
09:08:02:Application Ended
09:08:02:-222
Can someone tell me how to get this rectified? The WCS portal is installed and running and has been for months. The DW is upgraded but I cannot get the SharePoint self service portal or the App server to upgrade due to this error.

Hello
One question you have the website installed on the same
server on which you have the Server Management
Server, so if you can
not make your upgrade to
SP1, this changed because
a prerequisite of System Center Service
Manager 2012 SP1 in which you can not have
the server Mangement and
website on the same server they have to be
separate.

How to sequence Microsoft System Center Service Manager?

AppV Version: 5.0
OS: Windows 7 64-bit
Application Name: System Center Service Manager 7.5.2905.0
Issue: This applications has a shortcut named as "Service Manager Shell" which will launch as shown in screenshot below,
The same shortcut will launch as shown in screenshot below with Sequenced Application,
Please let me know how to make this shortcut launch same as source.
Regards,
Reddy

I would check the package for any reference of the specific path to the C:\Program Files\Microsoft System Center 2012 path. Also have you run a ProcMon trace to see where the app is looking for the files? The certificate may be pointing to the C:\Program
Files Directory rather than the App-V path..
PLEASE MARK ANY ANSWERS TO HELP OTHERS Blog:
rorymon.com Twitter: @Rorymon

Subkey HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\fdemd not exist

During installation of PI 7.0 gives message
The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\fdemd' does not exist on the 'localhost' host.

Hi Deepak,
I have never faced this error but i came across a description of it on the net. I guess there are some necessary drivers that are needed to be installed prior or should have been present are missing.
Also i check for "Services\fdemd" never found anything like it. Can you confirm the spelling.
"The Services subkeys under the following registry path contain parameters
for the device drivers, file system drivers, and Win32 service drivers:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services
The name of each Services subkey is the name of the service, which is also
the root of the name of the file from which the service is loaded. For
example, for the serial mouse, the service name and Services subkey name is
Sermouse. The file from which this is loaded is:
SystemRoot\SYSTEM32\DRIVERS\SERMOUSE.SYS."
For further reading refer:
http://support.microsoft.com/kb/103000

ITunes error: Could not write value ManageLLRouting to key \SYSTEM\CurrentControlSet\Services\Bonjour Service\Parameters. Itunes was not installed properly.

I received the following iTunes error after installing itunes as an adminstrater on my computer using a 64 bit and windows 8.1 operating system: If you wish to import or burn CDs, you need to reinstall iTunes.
I tried the installation trouble shooter and received the following error: Could not write Value ManageLLRouting key\system\currentcontrolset\services\BonjourService\Parameters.
How can I fix Could not write Value ManageLL Routing Key error and install iTunes correctly? Must I uninstall Norton 360 degrees Antivirus program before installing iTunes.
I look forward to your tecniical support .
Cheers,
clinton86

Hi clinton86,
Welcome to the Apple Support Communities! I understand that are receiving an alert when trying to import a CD to iTunes and are being asked to reinstall iTunes. iTunes and all of its components must be removed in a specific order when uninstalling from a Windows computer. Please use the following article as a reference.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
1. Remove iTunes and related components from the Control Panel
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
I hope this helps,
-Joe

Buss system, buss service

Similar Messages

Maybe you are looking for