Bussiness rule for new or updated record

? Can I define bussiness rule:
send e-mail notification if record was added or record was updated successfully
from Moscow with money

Hi,
The ZEN Nano Plus is a plug & play device. Windows should automatically recognize the device the moment you plug it in.

Similar Messages

Add update rule for new key figure in one info struc

Hi, everyone
I would like to know how to add update rule for new key figure in one info struc.
Thanks ahead.
Eric

1)I have created the update rule for one info structure
2)add one key figure in the info structure due to business requirement
3)then I use MC25 to add update rule for the new key figure, but I find that there no relevant menu to do such operation.
Can anybody tell me how to do with it?
Any answer will be appriciated.

How can I activate the transfer rules for the ODS updating a data target.

We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to 'update the data target' I get a date & time stamp' error on the info-package transfer rules.
I then Replicate the datasource 80FIGL_O01.
I must then 'activate' the transfer rules.
However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
How can I activate the transfer rules for the ODS updating a data target.
The error text is as follows:
DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 02/15/2007 10:42:33.
The time stamp in the BW system is 11/07/2006 13:11:54.
System response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
Thanks for your assistance.
Denny

Hi Dennis,
Try, using Business Content to activate your data source
hope this will help you
How activate business content?
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm

How can I disable notification for new install update for adobe??

How can I disable notification for new install update for adobe (adobe reader, flash player, etc.)
Is there way from SCCM2012 or group policy or any easy way?????
Please help me

If you mean the built-in functionality of Adobe Reader and Adobe Flash, it's different mechanism for both.
For the reader, check this guide for example:
http://www.adminarsenal.com/admin-arsenal-blog/bid/84409/Adobe-Customization-Wizard-XI-Tutorial
For flash, check this guide for example:
http://jthys.wordpress.com/2012/07/07/disable-automatic-updates-for-adobe-flash-shockwave-player-reader/
After you've studied the above guides, you need to implement those to be used with ConfigMgr application deployment so that when you deploy Reader/Flash, you get the result you want = no automatic update functionality.

DBAdapter polling for new or changed records not issuing callback?

I have a process which includes a partner link with a database adapter.
The database adapter is to poll a table for new records using an external database server.
I have no relationships setup, it's a single-table query.
The adapter is configured to delete rows after they are read.
I have the receive process of that partner link tied to a receive activity and its own input variable assigned.
My process compiles and deploys successfully. When I initiate the process through the BPEL console, the instance of the process waits at the receive activity and nothing happens, even after I manually add records to the table being polled. (which do get deleted, apparently by the partner link.)
I have other dbadapter partner links in the same process using the same connection that work fine, specifically using procedure execution and custom sql queries.
I can't find any errors or warnings about this, and the interactions manager in the BPEL Console allows me to manually send a message to the instance, allowing it to continue.
The application server is 10.1.3.1.0 and I am using JDeveloper 10.1.3.2.0.4066
Message was edited by:
Paul.Dunbar
Follow-up:
When I set activation logging to debug, I get the following in domain.log
<2007-04-03 08:15:28,591> <DEBUG> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.TopLinkLogger log> client acquired
<2007-04-03 08:15:28,591> <DEBUG> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.TopLinkLogger log> SELECT SOME_ID, SOME_VALUE FROM PAULD.SOME_TABLE ORDER BY SOME_ID ASC
<2007-04-03 08:15:28,592> <DEBUG> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.TopLinkLogger log> client released
From looking at this it may be that the callback to the receive activity is not occurring?
Message was edited by:
Paul.Dunbar
Second follow-up:
I'm still having this issue but must give up on troubleshooting.
Documentation on polling adapter says nothing about handling callbacks, I've been trying to use correlations here with no luck. I'm also not seeing any documentation about setting up correlations for use with the database adapter.
now the issue I'm having is that the inbound database adapter is still polling my table and deleting records, even though I've undeployed my process.

I did not. Currently the manual recovery area is empty. I've tried re-deploying my process and am now getting the following in my logs (all debugging on):
<2007-04-05 08:01:36,671> <DEBUG> <default.collaxa.cube.engine.deployment> <LockManager::acquire> Acquired read lock for SendEventNotice-1.0
<2007-04-05 08:01:36,671> <DEBUG> <default.collaxa.cube.engine.deployment> <LockManager::release> Released lock for SendEventNotice-1.0
<2007-04-05 08:01:36,672> <DEBUG> <default.collaxa.cube.engine.deployment> <LockManager::acquire> Acquired read lock for SendEventNotice-1.0
<2007-04-05 08:01:36,672> <DEBUG> <default.collaxa.cube.engine.deployment> <LockManager::release> Released lock for SendEventNotice-1.0
<2007-04-05 08:01:36,678> <DEBUG> <default.collaxa.cube.engine.data> <ConnectionFactory::getConnection> GOT CONNECTION 1 Autocommit = false
<2007-04-05 08:01:36,681> <DEBUG> <default.collaxa.cube.engine.data> <ConnectionFactory::closeConnection> CLOSE CONNECTION 0
<2007-04-05 08:01:36,681> <DEBUG> <default.collaxa.cube.engine.data> <ConnectionFactory::getConnection> GOT CONNECTION 1 Autocommit = false
<2007-04-05 08:01:36,682> <DEBUG> <default.collaxa.cube.engine.data> <ConnectionFactory::closeConnection> CLOSE CONNECTION 0
<2007-04-05 08:01:36,686> <DEBUG> <default.collaxa.cube.engine.deployment> <LockManager::acquire> Acquired read lock for SendEventNotice-1.0
<2007-04-05 08:01:36,687> <DEBUG> <default.collaxa.cube.engine.deployment> <LockManager::release> Released lock for SendEventNotice-1.0
<2007-04-05 08:01:36,688> <DEBUG> <default.collaxa.cube.engine.deployment> <LockManager::acquire> Acquired read lock for SendEventNotice-1.0
<2007-04-05 08:01:36,688> <DEBUG> <default.collaxa.cube.engine.deployment> <LockManager::release> Released lock for SendEventNotice-1.0
<2007-04-05 08:01:36,688> <DEBUG> <default.collaxa.cube.engine.deployment> <LockManager::acquire> Acquired write lock for SendEventNotice-1.0
<2007-04-05 08:01:36,688> <DEBUG> <default.collaxa.cube.engine.data> <BaseProcessPersistenceAdaptor::updateMetaData> Updating process metadata [ domain = default, process = SendEventNotice, revision = 1.0, state = 0, lifecycle = 0 ]
<2007-04-05 08:01:36,688> <DEBUG> <default.collaxa.cube.engine.data> <ConnectionFactory::getConnection> GOT TX CONNECTION 1 Autocommit = false
<2007-04-05 08:01:36,691> <DEBUG> <default.collaxa.cube.engine.dispatch> <BaseDispatchSet::receive> Receiving message log process event message 61b55bd8c71ae1e3:-3d66bcb1:111c1b2d4aa:-7f9c for set system
<2007-04-05 08:01:36,691> <DEBUG> <default.collaxa.cube.engine.dispatch> <Dispatcher::adjustThreadPool> Allocating 1 thread(s); pending threads: 1, active threads: 0, total: 84
<2007-04-05 08:01:36,693> <DEBUG> <default.collaxa.cube.engine.dispatch> <DispatcherBean::send> Sent message to queue
<2007-04-05 08:01:36,693> <DEBUG> <default.collaxa.cube.engine> <DomainObserverRegistry::notify> Notifying observer class oracle.bpel.services.rules.DeploymentListener with aspect class com.collaxa.cube.engine.observer.ProcessStateChangeAspect for domain default
<2007-04-05 08:01:36,693> <DEBUG> <default.collaxa.cube.engine> <DomainObserverRegistry::notify> Notifying observer class com.collaxa.cube.engine.test.driver.deployment.BPELTestDeployer with aspect class com.collaxa.cube.engine.observer.ProcessStateChangeAspect for domain default
<2007-04-05 08:01:36,693> <DEBUG> <default.collaxa.cube.engine> <DomainObserverRegistry::notify> Notifying observer class oracle.bpel.services.workflow.task.PurgeTask with aspect class com.collaxa.cube.engine.observer.ProcessStateChangeAspect for domain default
<2007-04-05 08:01:36,693> <DEBUG> <default.collaxa.cube.services> <oracle.bpel.services.workflow.task.PurgeTask::update(ICubeAspect> Called for aspect com.collaxa.cube.engine.observer.ProcessStateChangeAspect
<2007-04-05 08:01:36,693> <DEBUG> <default.collaxa.cube.engine> <DomainObserverRegistry::notify> Notifying observer class oracle.tip.esb.configuration.deployment.bpel.BPELSvcDeploymentManager with aspect class com.collaxa.cube.engine.observer.ProcessStateChangeAspect for domain default
<2007-04-05 08:01:36,693> <DEBUG> <default.collaxa.cube.engine.dispatch> <SystemDispatchSet::fetchScheduled> Fetched message log process event message 61b55bd8c71ae1e3:-3d66bcb1:111c1b2d4aa:-7f9c from system queue for processing
<2007-04-05 08:01:36,693> <DEBUG> <default.collaxa.cube.engine.dispatch> <LogProcessEventMessageHandler::handle> Processing log process event message 61b55bd8c71ae1e3:-3d66bcb1:111c1b2d4aa:-7f9c
<2007-04-05 08:01:36,693> <DEBUG> <default.collaxa.cube.engine> <DomainObserverRegistry::notify> Notifying observer class com.collaxa.cube.engine.data.CubeInstanceCache with aspect class com.collaxa.cube.engine.observer.ProcessStateChangeAspect for domain default
<2007-04-05 08:01:36,693> <DEBUG> <default.collaxa.cube.engine> <DomainObserverRegistry::notify> Notifying observer class oracle.bpel.services.workflow.DeploymentListener with aspect class com.collaxa.cube.engine.observer.ProcessStateChangeAspect for domain default
<2007-04-05 08:01:36,693> <DEBUG> <default.collaxa.cube.services> <oracle.bpel.services.workflow.DeploymentListener::update(ICubeAspect> Called for aspect com.collaxa.cube.engine.observer.ProcessStateChangeAspect
<2007-04-05 08:01:36,693> <DEBUG> <default.collaxa.cube.engine> <DomainObserverRegistry::notify> Notifying observer class com.collaxa.cube.engine.core.BaseCubeProcess$ActivationObserver with aspect class com.collaxa.cube.engine.observer.ProcessStateChangeAspect for domain default
<2007-04-05 08:01:36,693> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> JCAActivationAgent::onStateChanged State is changed for process 'bpel://localhost/default/SendEventNotice~1.0/', state=ON
<2007-04-05 08:01:36,693> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Adapter Framework instance: OraBPEL - endpointActivation for portType=initialCoordination_ptt, operation=receive
<2007-04-05 08:01:36,693> <DEBUG> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Looking up jca:address...
<2007-04-05 08:01:36,693> <DEBUG> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Looking up WSDL Service jca:address for portType=initialCoordination_ptt and operation=receive
<2007-04-05 08:01:36,693> <DEBUG> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Locating Resource Adapter for jca:address.. {http://xmlns.oracle.com/pcbpel/wsdl/jca/}address: location='eis/DB/TST2' ManagedConnectionFactory='oracle.tip.adapter.db.DBManagedConnectionFactory' (properties: {Password=E466676A7A458FA6EBCFF72E13C04843, PlatformClassName=oracle.toplink.platform.database.oracle.Oracle10Platform, ConnectionString=jdbc:oracle:thin:@//lxdb2:1521/TST2, DriverClassName=oracle.jdbc.OracleDriver, UserName=SONRIS_DBA})
<2007-04-05 08:01:36,693> <DEBUG> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Setting up Input Header Message QName: null
<2007-04-05 08:01:36,693> <DEBUG> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Setting up Input Header Part Name: null
<2007-04-05 08:01:36,694> <DEBUG> <default.collaxa.cube.engine.data> <ConnectionFactory::getConnection> GOT TX CONNECTION 2 Autocommit = false
<2007-04-05 08:01:36,694> <DEBUG> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Setting Adapter Name: Database Adapter
<2007-04-05 08:01:36,694> <DEBUG> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Determining Input and Output WSDL Message elements
<2007-04-05 08:01:36,695> <DEBUG> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Creating ActivationSpec...
<2007-04-05 08:01:36,695> <DEBUG> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Instantiating ActivationSpec oracle.tip.adapter.db.DBActivationSpec
<2007-04-05 08:01:36,695> <DEBUG> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Populating ActivationSpec oracle.tip.adapter.db.DBActivationSpec with properties: {MaxRaiseSize=1, MarkReadFieldName=DONE_READING, UseBatchDestroy=false, MarkUnreadValue=UNREAD, ReturnSingleResultSet=false, QueryName=initialCoordination, MarkReadValue=READ, MarkReservedValue=RESERVED, DescriptorName=initialCoordination.AnotherTable, NumberOfThreads=1, MappingsMetaDataURL=initialCoordination_toplink_mappings.xml, PollingStrategyName=LogicalDeletePollingStrategy, PollingInterval=5, SequencingFieldName=AN_ID, MaxTransactionSize=unlimited}
<2007-04-05 08:01:36,697> <DEBUG> <default.collaxa.cube.engine.data> <ConnectionFactory::closeConnection> CLOSE TX CONNECTION 1
<2007-04-05 08:01:36,700> <DEBUG> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Preparing ActivationSpec for Translation Service
<2007-04-05 08:01:36,701> <DEBUG> <default.collaxa.cube.engine.dispatch> <BaseDispatchSet::acknowledge> Acknowledged message log process event message 61b55bd8c71ae1e3:-3d66bcb1:111c1b2d4aa:-7f9c
<2007-04-05 08:01:36,705> <DEBUG> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Preparing ActivationSpec for Connection Factory and Properties
<2007-04-05 08:01:36,705> <DEBUG> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Invoking endpointActivation() on Resource Adapter
<2007-04-05 08:01:36,708> <INFO> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.DBResourceAdapter endpointActivation> Activating: oracle.tip.adapter.db.DBActivationSpec@4e7ed
<2007-04-05 08:01:36,710> <DEBUG> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.TopLinkLogger log> client acquired
<2007-04-05 08:01:36,713> <DEBUG> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.TopLinkLogger log> client released
<2007-04-05 08:01:36,715> <DEBUG> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.DBEndpoint start> About to schedule the inbound polling thread with the work manager. ActivationSpec: oracle.tip.adapter.db.DBActivationSpec@4e7ed
<2007-04-05 08:01:36,716> <INFO> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.DBEndpoint start> Kicked off 1 threads.
<2007-04-05 08:01:36,717> <DEBUG> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.TopLinkLogger log> client acquired
<2007-04-05 08:01:36,719> <DEBUG> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.TopLinkLogger log> begin transaction
<2007-04-05 08:01:36,721> <DEBUG> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.TopLinkLogger log> rollback transaction
<2007-04-05 08:01:36,722> <ERROR> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.InboundWork handleException> Non retriable exception during polling of the database ORABPEL-11624
DBActivationSpec Polling Exception.
Query name: [initialCoordination], Descriptor name: [initialCoordination.AnotherTable]. Polling the database for events failed on this iteration.
If the cause is something like a database being down successful polling will resume once conditions change. Caused by Exception [TOPLINK-6024] (Oracle TopLink - 10g Release 3 (10.1.3.1.0) (Build 061004)): oracle.toplink.exceptions.QueryException
Exception Description: Modify queries require an object to modify.
Query: UpdateObjectQuery(null).
<2007-04-05 08:01:36,722> <FATAL> <default.collaxa.cube.activation> <AdapterFramework::Inbound> [initialCoordination_ptt::receive(AnotherTableCollection)]Resource Adapter requested Process shutdown!
<2007-04-05 08:01:36,723> <FATAL> <default.collaxa.cube.activation> <AdapterFramework::Inbound>
ORABPEL-11624
DBActivationSpec Polling Exception.
Query name: [initialCoordination], Descriptor name: [initialCoordination.AnotherTable]. Polling the database for events failed on this iteration.
If the cause is something like a database being down successful polling will resume once conditions change. Caused by Exception [TOPLINK-6024] (Oracle TopLink - 10g Release 3 (10.1.3.1.0) (Build 061004)): oracle.toplink.exceptions.QueryException
Exception Description: Modify queries require an object to modify.
Query: UpdateObjectQuery(null).
As reflected in the log messages, the process is automatically turned off. Turning it back on is ineffective, the server turns it back off with the same exception.
This is a separate issue, but I'm not seeing much reason for this to be happening either. I've scrapped the process and started over, using my own BPEL process that simulates what I would expect that the dbadapter is supposed to do when it's configured to poll for records.

Start routine in Transfer Rules for Data Mart update

Hi,
Is it possible to create a start routine in a transfer rule of a Datamart update (from ODS to Cube)?
Thxs.
LauQ

Roberto,
If I read well the content of note 499404 - referred to in 630854 - I conclude that it is recommended to use update rules rather than transfer rules in the case of ODS objects when one wishes to modify data records up to the eventual data target.
Do you agree?
Thxs.
LauQ

Activating transfer rules for new source system

Hi
we are having 2 R/3 source system in BI. I had activated all the transfer rules with the first source system and now i have created a new source sytem connecting to a different R/3 client. I tried to change the transfer rules point to the new source system using the program RS_TRANSTRU_ACTIVATE_ALL giving the new source system and the infosource name. But i get the error "No Transfer Structure Selected" when i execute the prg.
how can i change the source system without creating the transfer rules for the new source but use the existing transfer rules and just change the source system assigned to it????
Regards
Sujai

Hi Sujai,
There are many cases when this program is used.
When the Trans rules get de-activated due to impact,we need to first replicate the data source and activate the TR using this program.This generally occurs during the data loads in prd.
It does not makes sense to transport it when there r no changes done to the TR.So simply,u can use this program to activate.
If the program does not work,then you are left with the transport option.
Thanks & Regards,
Suchitra.V

Droid DNA GPS stopped working, no satelites locking, and phone keeps searching for new software update.

Droid DNA running version 4.4.2
Google maps says GPS signal lost and GPS software shows that there are no active satellites located.
Thinking that it was a bug in the software I had the phone check for software updates and it is now stuck with the message "checking for new software for your HTC HTC6435LVW". Phone still works but the message keeps reappearing.
I have powered the phone off, removed the sim card, reinserted the sim card and powered the phone back up but that did not help. What next?

Never fear, help is here Citadel_1974! I would be delighted to help out today. Have you attempted to process a full restore/reset on the device? If not, please complete and reconnect with us on the outcome. We look forward to hearing from you soon, thanks!
MatthewS_VZW
Follow us on Twitter @VZWSUPPORT

Rules for Folder Metadata Update

How to create a rule which is executed when the folder metadata is updated?
I tried creating a global rule. Rule groupings are reflected on folder metadata information, but when I need to derive one value from another when the folder information page is update - it does not happen.

No. But thank you for the imformation. I know how to create dependent choice lists.
The problem was in the following.
As I want some metadata fields be dependent on dsecuritygroup and ddoctype and they can not be chosen as dependent fields, i had to implement additional xdoctype and xsecuritygroup metadata fields. that means that for system ddoctype and dsecuritygroup fields the values shlould be derived from my custom fields.What was done with the use of rules. But the problem was, that the values were derived only for the content items, but not for folders. E.g. when I updated xSecurityGroup for the folder, corresponding value of dSecurityGroup for this folder was not updated.
Finally I wrote a trigger on Colmeta and Collections tables.
But I am very glad, you answered my post, may be you can also help me with the following:
1) Derived Value - Concatenated String Fields
2) When you define a view there is a nuber of parameters which are not defined in help:
- publish view data
- allow modification by contributors
- use standard doc. security
- use custom security implementor
3) Choice List Depending on Two Fields
Regards,
Gulnara
Edited by: guliflower on Jul 8, 2010 12:41 AM

DBAdapter polling for new or changed records not issuing callback within an asynchronous BPEL process?

Hi,
I have a requirement to poll a database table withing an asynchronous process. The reason I want to use a receive within an asynchronous BPEL is because the process needs to be notified many times thru polling. So might need many receive activities.
I have developed a process as described below :-
1. Created an asynchronous process.
2. Created a Database adapter for polling a table. Logical delete strategy is being used.
3. Have put a receive activity from the DB Adapter created.
4. Created a correlation set consisting of a single property(String)
5. Created a property alias to refer to
a. the input string of the asynchronous process. (unique for this process)
b. the input from the database adapter (unique for this process)
I initiate this process from the console. Then I inserted a record the table with proper inputs.
But the BPEL waits indefinitely at the receive activity.
When I try to poll the table from an empty BPEL process, it works perfectly fine.
Regards
Kabir

Hi Kabir,
Please refer the following sample for your usecase.
Though Please be aware that one instance of BPEL process will correlate with only one message if you have one receive activity. Not all the messages tht DBAdapter polls.
bpel-305-InboundCorrelationShows how to perform message correlation within BPEL
Also Refer the following in Developer guide.
http://docs.oracle.com/cd/E28280_01/dev.1111/e10224/bp_correlate.htm#CHDFHAAE
If you want to keep polling and receiving the messages in the same BPEL process you might have to put the receive activity in a while loop construct. But as a design this is not a good design.
Can you elaborate your requirement to understand better and suggest better solution.

HT4623 i have a ipad1 but when i look for new software updates it says it has the latest ( being 5.0) nothing higher?

hello, how do i go about updating my iOS on my ipad to higher or latest as it is only iOS5 and some apps/products will not work or run unless higher?

iOS 5.1.1 is the last update for that model.
See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
     Device                                       iOS Verson
iPhone 1                                      iOS 3.1.3
iPhone 3G                                   iOS 4.2.1
iPhone 3GS                                 iOS 6.1.x
iPhone 4                                      iOS 7.0.x
iPhone 4S                                    iOS 7.0.x
iPhone 5                                      iOS 7.0.x
iPhone 5c                                     iOS 7.0.x
iPhone 5s                                     iOS 7.0.x
iPod Touch 1                               iOS 3.1.3
iPod Touch 2                               iOS 4.2.1
iPod Touch 3                               iOS 5.1.1
iPod Touch 4                               iOS 6.1.x
iPod Touch 5                               iOS 7.0.x
iPad 1                                          iOS 5.1.1
iPad 2                                          iOS 7.0.x
iPad 3                                          iOS 7.0.x
iPad 4                                          iOS 7.0.x
iPad Mini                                      iOS 7.0.x
iPad Air                                        iOS 7.0.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

How to Petition Apple for new iDVD update or release

First off, I was bothered that when I purchased my Mac that it didn't come with iDVD at all and that I had to purchase iLife11' from Amazon in order to have the program. Wasted $50 for 1 program when it should've been included with my buy. I've been told by customer care agents in the past multipul times that they would make a note and submit it and that it would be seen. I would like to take a more assertive stance on this now but I don't have any know how on how to present and persue something like this from Apple. I don't want to be nasty about this, I just want to be able to burn DVDs of my little girl so I can send them to her grandparents. I do this once or twice a month, it depends on how much footage I take, so I'm running out of different DVD menus very quickly. To be honest, I'd be willing to pay a little more for this release if needs be.
iMovie and iDVD are a companion set, they are for more than just home movies, they are also for school presentations or business situations potentially. Why bother to produce and market iMovie they way Apple does if the home user can't use it to the full extent for which it was created?
Any ideas? Anyone out there that has a simular position on this? Please let me know, thanks.

You can send product feedback to Apple using this link:
http://www.apple.com/feedback/
But you will not receive a reply from them.
Why is there no iDVD on my new Mac? How do I get it and how do I install it?
https://discussions.apple.com/docs/DOC-3673

HT4623 How to close apps at bottom of screen for new iphone update?

Updated my phone 7ios can't close open apps at bottom of screen its causing my phone to drain battery

Don't quite understand what you're asking but I think you mean the apps running in the background?. If thats the case do this:
- double tap the home button
- swipe the app up you wish to close
You could also read over the link below to see what steps you can take to get the most out of your battery:
http://www.apple.com/batteries/iphone.html
Also a new feature in iOS 7 called "Background App Refresh" can use a bit of battery life so it wouldn't hurt to also turn this off. You can do this by going to settings>general>background app refresh.

DB Adapter: Polling For New Records returns the First record multiple Times

I Polling for New or Chnaged Records against DB2 on iSeries. The DB Adapter returns the first record from the Table multiple Times. If the Table has 5 records it displays the first record 5 times. I am using BPEL 10.1.3.1 Can anyone help me with this.

Hi there,
please check out the DBAdapter trouble-shooting guide:
http://download-east.oracle.com/docs/cd/B31017_01/integrate.1013/b28994/app_trblshoot.htm#CIHFEHFA
I am copying an entry from there into here:
A.1.21 Some Queried Rows Appear Twice or Not at All in the Query Result
Problem
When you execute a query, you may get the correct number of rows, but some rows appear multiple times and others do not appear at all.
This behavior is typically because the primary key is configured incorrectly. If the database adapter reads two different rows that it thinks are the same (for example, the same primary key), then it writes both rows into the same instance and the first row's values are overwritten by the second row's values.
Solution
Open Application Sources > TopLink > TopLink Mappings. In the Structure window, double-click PHONES. On the first page, you should see Primary Keys. Make sure that the correct columns are selected to make a unique constraint.
Save and then edit the database partner link.
Click Next to the end, and then click Finish and Close.
Open your toplink_mappings.xml file. For the PHONES descriptor, you should see something like this:
<primary-key-fields>
<field>PHONES.ID1</field>
<field>PHONES.ID2</field>
</primary-key-fields>
Thanks
Steve

I need a iOS 5.1.1 new software update for as my iPhone ?

When give us for new software update iOS 5.1.1 my iPhone 4S , so that's new software is supporting iPhone 4S ? So I was have a earlier software iOS 6.0.1 is updates so I need to be updates soon iOS 5.1.1 new software update. (iOS 6.0.1 to iOS 5.1.1) So I thinks u r team is send me soon for software updates iOS 5.1.1

The newest software is 6.0.1, iOS 5 is the old software. The update numbers go up not backwards, you have the latest update if you are showing 6.0.1 Hope this helps!

Bussiness rule for new or updated record

Similar Messages

Maybe you are looking for