Bussiness System
Hi Experts,
1, In Integration Directory , When trying to Assign Business System to Scenario, it shows following details,
Communication Component: | Q01CLNT118 is already locked in change list Standard change list by user pisuper
i couldnt import the BS to Directory.
2, When i create Receiver Determination, while doing test configuration , it shows follwing errror
Receiver Determination
Internal Error
Server returned HTTP response code: 500 for URL: http://xidolphin:50000/sap/xi/simulation?sap-client=200
What will be the error?
Thank you
1, In Integration Directory , When trying to Assign Business System to Scenario, it shows following details,
Communication Component: | Q01CLNT118 is already locked in change list Standard change list by user pisuper
i couldnt import the BS to Directory.
Do as suggested in above replies to solve unlock it.
2, When i create Receiver Determination, while doing test configuration , it shows follwing errror
Receiver Determination <Not found>
Internal Error
Server returned HTTP response code: 500 for URL: http://xidolphin:50000/sap/xi/simulation?sap-client=200
What will be the error?
To slove this you have to activate the SIMULATION service in XI by using tcode SICF. Run the tocde and activate the simulation service in below path.
Path: default_host/sap/xi/ simulation (right click on simulation and activate it)
Now you can perform test configuration.
Regards,
Sarvesh
Similar Messages
-
Diff between bussiness service and bussiness system.
hi,
actually i want to know that what is the diff between bussiness service and bussiness system..
thanks in advance,
jpBoth the Business system and Business Service are same as per the functionality.
we choose Business system when we know the technical system(Business system) in our SLD.
if we doesnt any idea about the business system in SLD we go for Business service.
thanks & regards
harsha vardhan.P
*reward points if u satisfied with my answer*** -
How To Change Existing Bussiness System in SLD
hi experts,
how can a new SWC add to an existing business System. Plz tell me how to assign Message Interface to business Systems.
thanks in advance
nikhil bosto add the new SWCV to your BS, click on tot the BS in the SLD, then you will c the details like TS,Product and SWCV there you will have the option add SWCV, click that and select the SWCV which you wnat to add to the BS.....
Plz tell me how to assign Message Interface to business Systems
if your Message interface is in different SWCv than the BS which you want to assign, change the option to slect all BS.....not necessary to add the MI to the new BS. -
Hi Friends,
I am new to XI. I am practicing File to File scenario.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&
I struck, please guide me.
I am able to create Product, BS, SWCC, Data types, messages types, Mapping, Message interfaces. All tested my data (messages) showing correctly.
Now i am at Integration Directory here i am created configuration scenario and there i am going to assign business system. here i am not able to find my business system which i created previously.
I am able to find other business system which is not created by me.
Thanks,
Kumar.Hi,
This basically happens beacuse of two reasons:
1) SLD cache not updated.
2) The business system already imported to the Integration repository.
Resolution:
1) Update the SLD cache and try to import.
2) If you Still can't find the business system check the list of business system(you will find the business system ) and say add to your sceanrio
Still if you are facing the problem:
Goto Transation code:SXI_CACHE and update the cache maully
Rewards if helpful. -
Hi guys,
i implemented one scenario with one business system, and i am not able to reuse the same business system to implement another scenario.
but this is possible through wizard why?Dear Hari,
As Raj has mentioned you can't import the Business System from SLD once it's already done before.
Follow these steps:
1) Go to Integration Directory.
2) Click on Objects on the left hand side window.
3) Click on Business Systems there.
4) You will see the list of all the business systems which have already been imported into ID from SLD. your system will also be listed there.
5) Right click on it and choose 'Assign to Business Scenario'. Select your system there.
6) and you should see your business system now under your namespace....
Ashish -
Logical System Name Not appearing in the Business System
Hi,
Initially we had created a Technical system with Client 700 without a "Logical System Name" in SLD. hence the 'logical system name' in 'business system' was also Blank.
Now, since we are implementing the IDOC to file scenario; we need to maintain the "Logical System Name" in the client and which in turn should reflect in our Business System in SLD.
Though we maintained the Logical System Name in the Technical System --> Client --> Logical System Name; we are unable to see the same(Logical System Name) in Business System ('Integration' tab)
Please also note that Business System is of the ROLE: Integration server.
When we go to business system in SLD ---Integrtaion tab ---Logical System Name -- is still blank.
Can anyone please help us to update the 'Logical system name' in Business System in SLD?
Regards,
RehanHi Sunil,
I followed your link till
Bussiness System -> select your bussiness System -> in Below pane u will find Details of your bussiness system ->amongs the various tabs available select Integration Tab->U will See option for technical system beside that u will see option for change ->click this ->u will be taken to Logical system ->there u define u r logical syatem name and then save the entries.
When I clicked the option chnage ---> "Change Associated Technical System" appeared, It didn't take me to Logical system.
But in turn I clicked hyperlink corresponding to Technical systems, it took me to technical system --> clients tab --I have entered the Logical system name.
When I go back to Business system again its not showing the Logical system name in Integration tab.
regards,
rehan -
Hi All,
I was going through the guide
https://websmp105.sap-ag.de/~sapdownload/011000358700001410142005E/Configure.pdf
for the configuration of IDOCS. In this document, they have asked to verify the name of Logical System in SLD. In SLD I cant find an entry for the field Logical SYSTEM(for my client xxx in R/3). Now I do not want to delete the existing bussiness system but edit it to contain the Logical System Name in it.
Pls help me out.
Thanks & Regards,
Jai Shankar.Hi
- Go to Technical System in the SLD.
- Select the system you want to check
- Select the client number you want to check
Here you will find the Logical System Name -
No service for system X client Y in the integration directory
Hi guys and gurus,
I've struggling with the following case for a couple of months (!!) and still I can not make it. I have to say that I am coming from the MM modules but trying to set up a ICH demo by myself during my spare time.
I send an idoc from R/3 to XI using program RSMIPROACT and I get message <b>No service for system SAPR3I, client 800 in Integration directory</b>. Even though, idoc has status 03 (Outbox).
- I have created a technical and business system.
- Connections work properly in SM59
- Port XIDOCPORT with RFC XIDCLNT100 maintained txn WE21
- Partner XIDCLNT100 (LS) with Outbound parameter:
Idoc name - Port created. txn WE20.
- IDX1 maintained in XI system.
Is there something missing?
This is my first post but points rewarded if somebody takes me out of this hole.
Thanks,
Ivan.
key words: ICH, Note 940313 IDoc adapter: Error messages in SM58, <a href="https://service.sap.com/sap/support/notes/940313">Idoc Adapter : Error Messages in SM58</a>, No service for system SAPABC client 123 in the integration directory,Hi ,
Create a technical system and bussienss system of type WEB AS ABAP and use this bussiness system for source system in XI and try it.
Thanks & Regards,
Sekhar -
Hi everyone:
I am trying to do a connection from an ficticious R/3 system to XI but we have a problem with the idoc adapter, the error log is:
03/20/06 14:50:11 idoup Logon RfcOpen result=1
03/20/06 14:50:11 idoup Input datafile
(c:/sap45/sapdaten.d/0000XI01/TEVEN.000) opened
03/20/06 14:50:11 idoup dataH:(E1BPCC1UPTEVEN 100 )
03/20/06 14:50:11 idoup dataD:(T90CLNT090P10907220040811144028200408111)
03/20/06 14:50:11 idoup dataH:(E1BPCC1UPTEVEN 100 )
03/20/06 14:50:11 idoup dataD:(T90CLNT090P10907220040811144028200408111)
03/20/06 14:50:11 idoup Call to (IDOC_INBOUND_ASYNCHRONOUS) failed (3)
03/20/06 14:50:11 idoup Handle=1
03/20/06 14:50:11 idoup key............:
03/20/06 14:50:11 idoup status.........:
03/20/06 14:50:11 idoup message........:No service for system SAPGET,
client 100 in Integration Directory
03/20/06 14:50:11 idoup internal status:
03/20/06 14:50:11 idoup idoc_upload failed with rc=(3), try(2)
03/20/06 14:50:12 idoup key............:No service for system SAPGET, cl
03/20/06 14:50:12 idoup status.........:EXCEPTION SYSTEM_FAILURE RAISED
03/20/06 14:50:12 idoup message........:No service for system SAPGET,
client 100 in Integration Directory
03/20/06 14:50:12 idoup internal status:
03/20/06 14:50:12 idoup idoc_upload failed with rc=(18), try(1)
03/20/06 14:50:13 idoup retry counter expired requestfile
(c:/sap45/sapdaten.d/0000XI01/hrcc1requpteven01) removed
03/20/06 14:50:13 idoup Logoff...
In the SLD the system is created and we can see it also in the sxi_cache.
CAN SOMEBODY HELP ME PLEASE?? thanks a lotHi Michal:
In mi idx1, the port SAPGET is created. Its incredible but true. In the sld the bussiness system is created too.
I dont know if the problem relates on that the sender business system is a Ficticious R/3 system, therefore, it hasn't partner .
what will have to put in my SLD for XI notice this system????? -
Technical Systems and Business Systems
Hello Everybody!!!
I have some doubts, can you help me, please???
1) Technical Systems are application(software) systems, ok? They aren't hardware systems, ok?
2) In my SLD I should have a SAP ECC system as a technical system and each of their clients as a bussiness system, ok?
3) For third-party systems, where the client concept doesn't exist, I should have one technical system and only one business system for my third-party system, ok?
thanks a lot
Juliohi julio ,
ur view is correct except in the technical system .
1) technical systems are the physically located systems in which we can create only technical system for any physically located system .
2) bussiness systems are logical systems . according to the type of technical system we can create the no of bussiness systems .
technical system of type W AS ABAP we can create multiple business systems as there is the concept of clients .
technical system of third party we can not create more than one business system as there is no matter of client .
3) so for every third party systems only one business system will be there .
some important points :.
atleast one business system will be there on any system .
we can create more than one business system on third party systems . -
No service for system BC_TREMAx, client 100 in Integration Directory
Hi, I have had this problem and spent to many hours on this. I decided to post the config once I got it working.
I am NOT using the system landscape directory for the java connector -> XI communicaiton.
The SLD is used for XI -> SAP
Scenario: send idocs
SAP Java connector -> SAP XI -> SAP 4.6c
here is the relevant code (the rest of it is in the examples of the java connector):
System.out.println("setMessageType");
doc.setMessageType("ACC_DOCUMENT");
doc.setRecipientPort("SAPSE1"); // get stuck in XI mapping if not set, otherwise not needed to get file into XI
doc.setRecipientPartnerType("LS");
doc.setRecipientPartnerNumber("SE1CLNT500");
doc.setSenderPort("BC_TREMA");
doc.setSenderPartnerType("LS");
doc.setSenderPartnerNumber("BC_TREMA");
doc.setClient("100");
Inside XI configuration integration builder
Business Service: Service: BC_TREMA
Under the menu Service - Adapter specific identifiers
Idoc Adapter Logical system: BC_TREMA (This thing is important when sending idoc XI -> SAP and should match the logical sys in the receiving SAP system)
IDoc Adapter and RFC adapter R/3 Sysytem ID: BC_TREMA
Client: 100
On receiver tab:
Name NameSpace Software componenet
ACC_DOCUMENT.ACC_DOCUMENT01 urn:sap-com:document:sap:idoc:messages TREMA_GLM, 1.0...
On sender tab:
Name NameSpace Software componenet
ACC_DOCUMENT.ACC_DOCUMENT01 urn:sap-com:document:sap:idoc:messages TREMA_GLM, 1.0...
In IDX1 trans
Port: BC_TREMA
Client: 100
RFC Destination: SE1 (A SAP test system from where IDOC def can be imported, rfc dests are setup in SM59)
In IDX2 trans
Make sure to import the IDOC type beforehand. If IDOC is not imported you get system error 000 in java connector in SP14.
That was a hard one to track down.
This should be it.
Another example where the difference is the SAP prefix...
doc.setMessageType("ACC_DOCUMENT");
doc.setRecipientPort("SAPSE1"); // get stuck in XI mapping if not set
doc.setRecipientPartnerType("LS");
doc.setRecipientPartnerNumber("SE1CLNT500");
doc.setSenderPort("SAP3MA");
doc.setSenderPartnerType("LS");
doc.setSenderPartnerNumber("TREMACLNT");
doc.setClient("100");
Inside XI configuration integration builder
Business Service: Service: TREMACLNT
Under the menu Service - Adapter specific identifiers
Idoc Adapter Logical system: TAPPMAN (This thing is important when sending idoc XI -> SAP and should match the logical sys in the receiving SAP system)
IDoc Adapter and RFC adapter R/3 Sysytem ID: 3MA
Client: 100
On receiver tab:
Name NameSpace Software componenet
ACC_DOCUMENT.ACC_DOCUMENT01 urn:sap-com:document:sap:idoc:messages TREMA_GLM, 1.0...
On sender tab:
Name NameSpace Software componenet
ACC_DOCUMENT.ACC_DOCUMENT01 urn:sap-com:document:sap:idoc:messages TREMA_GLM, 1.0...
In IDX1 trans
Port: SAP3MA (Note that the 3MA here is matched against the IDoc Adapter and RFC adapter R/3 Sysytem ID: 3MA)
(a not so well documented feature)
Client: 100
RFC Destination: SE1 (A SAP test system from where IDOC def can be imported, rfc dests are setup in SM59)
In IDX2 trans
Make sure to import the IDOC type beforehand. If IDOC is not imported you get system error 000 in java connector in SP14.
SE1CLNT500 as a SAP business system setup in the system landscape directory SLD
Receiver determination:
Sender
Service: TREMACLNT
Interface: ACC_DOCUMENT.ACC_DOCUMENT01
Namespace: urn:sap-com:document:sap:idoc:messages
Receiver
Party: *
Service: *
Configured receivers:
Service: SE1CLNT500
After saving you may do the setup in the bottom frame:
Configuration Overview for Receiver Determination
|SE1CLNT500 ->
ACC_DOCUMENT.ACC_IM_ACC_DOCUMENT Receiver _IDoc to SE1CLNT500
Interface determination
Sender
Service: TREMACLNT
Interface: ACC_DOCUMENT.ACC_DOCUMENT01
Namespace: urn:sap-com:document:sap:idoc:messages
Receiver
Service: SE1CLNT500
Configured inbound interfaces
Name Namespace Interface mapping Namespace Software comp
ACC_DOCUMENT.ACC_DOCUMENT01 urn:sap-com:document:sap:idoc:messages IM_ACC_DOCUMENT urn:trema-com:trema:trema TREMA_GLM...
Sender agreement
Not needed for IDocs
Receiver agreement
Sender
Service: TREMACLNT
Receiver
Service: SE1CLNT500
Interface: ACC_DOCUMENT.ACC_DOCUMENT01
Namespace: urn:sap-com:document:sap:idoc:messages
Receiver communication channel: Receiver_Idoc_to_SE1CLNT500
Hope this helps someone
/Otto Frost /CapgeminiHi ,
Create a technical system and bussienss system of type WEB AS ABAP and use this bussiness system for source system in XI and try it.
Thanks & Regards,
Sekhar -
FILE TO IDOC SCENARIO-Receiver Business system ECC showing Red
HI
In File-idoc scenario Business system showing red status in RWB .And i have given the role for the business system as application server and configure related integrated server . But the error in a RWB for the ping and self-test is as follows
Unable to log on to system buss_ecc_200 in language en with user PIRWBUSER .
I thing from XI side every thing is ok. But for bussiness system side ECC might miss some configuration .
could any help in this issue:
regards..Hi
Please try one of the followings:
1) In Configuration --> Business service --> Service --> Adapter specific identifiers. Give logical system name for the sender system (e.g XI_00_800)
2) In Design --> mapping objects. Give all information of sender n receiver in EDIDC40 segment and
In configuration --> receiver communication channel in that enable the checkbox take sender from payload.
3) In configuration --> Receiver Agreement --> Header mapping --> Sender Service (Give XI1 i.e ur sender system).
Also check the RFC destination that is the major problem with idoc... -
Unable to create New Business System
Hi
I Installed XI 3.0 and configuring as per the configuration guide.
When I try to create Business System (SLD) I get the following error message.
"Integration Server already defined There is already an integration server defined for the selected technical system. Please select role Application System."
Steps:
Logon on to SLD
Click on New Business System
Name: XID and click on Next
Technical System Type: Web AS for ABAP
Select System: XID on Hostname and select Client
Installed products: Choose all and click Nextt
Integration Server:
Business System Role: Integration Server
Pipeline url: http://HOST:PORT/sap/xi/engine/entry?action=execute
Initially I created Business System with wrong Name (P01) . I deleted it and try to recreate with new name (XID) I get the above error.
How to create a Business system and assign the role of Integration Server?
Thanks for the Help
RaghuHi RG,
Once we had same error ,due to some reason business system with role integration server deleted.
It has been resolved by deleting XI technical system and recreating same after that it allows to define new bussiness system with role as integration server .
It might help you.
Regards
Santosh -
Not able to see the Business systems
Dear Experts,
Thanks for you support and help.
I have created as per the below sequence for both sender and receiver types wherever necessary
1. Software Product
2. Software Component -
3.Technical System - (Third party )
4. Business system (Sender and Receiver)
http://wiki.sdn.sap.com/wiki/display/XI/CopyofFLATFILETOFLATFILE
imported the software compnent in IR and created Data Types, Message types etc and tested, it is working good.
I have created a Configuration Scenario, and tried to assign the business system in "Service Without Party", i was not able to see both the sender and receiver Business Systems which were already created and getting an error : service :Business systems not found
Do i need to change anything while creating Product, SW Component, Third Party Technical System and Busniess System..etc
Regards
BlueHi,
I think u r bussiness system is alredy assign to other scenario.If u assigned once it will not show in the list.U have to import the bussiness system not assign.In ID select 'Objects' it will show all the Bussiness system details.Selet u r business system and add to u r scenario.
Also refesh cache objects using SXI_CACHE and refesh obeject in ID.
In ID Go to ENVIRONMENT->select Clear SLD Cache
Then refresh the all objects.
Thanks
Ravi -
ITSmobile service pass system/port/client dynamically in the URL
Hi all,
The ITSmobile service we have created redirects to another service in different server using ~redirectURL.
so the ~redirectURL = http://splhrd398.baplc.com:8005/sap/bc/gui/sap/its/zdemo_mobile?sap-client=150
is there anyway to pass
system : splhrd398.baplc.com ( This is the name of the different server)
port no: 8005
sap-client=150
dynamically in the URL.
because when we transport the same to Testing and production. i need to know whether we have to do manually .
If you have any option to do dynamically let me know.
please throw some light,
thanks in advance
DeepakHi ,
Create a technical system and bussienss system of type WEB AS ABAP and use this bussiness system for source system in XI and try it.
Thanks & Regards,
Sekhar
Maybe you are looking for
-
Dynamic [Runtime] type casting in Java
Hello, This is my requirement. I have a method that takes class name as a parameter. Ex: Object myMethod(String classname){ Object xyz = getObject(); //userdefine method which returns some object /*<b>I need to typecast above object with the class na
-
Inter company STO-how to reduce the stock where no physical stock is kept in receiving plant
Dear All, I am facing one issue. Suppose if there are two plants belongs to two company codes A & B.Plant A is in TN & Plant B is in AP (both belongs to two different states). Plant B is the place where no physical stock is kept, it is a place where
-
What is the use for CREATING VIEW WITH CHECK OPTION?
Dear Legends, I have a doubt What is the use for creating view? A: First Data Integrity, Selecting Particular Columns.. What is the use for creating a view with check option? A: As per oracle manual I read that its a referential integrity check throu
-
Hi , I am creating report in BI7, I am creating Jump Target on this Report to R/3 report. Here, The values which are in BI has to be populated in R/3 report depending upon one charcteristic field in BI. So, to populate the values, I have given Assi
-
Upgrade 4.2.1 to 4.3.5
How I culd upgrade my actual version (4.2.1) to the new one (4.3.5)? I have an iPhone 3G third generation and when a try to upgrade the version in iTunes I recived a message that said that I have the last version.