Busy greeting does not play when I am on another call

My busy greeting does not play when I am on another call. My regular greeting plays. I called verizon and they gave me some **bleep** about how that feature doesn't work if you have call waiting. It USED to work for me and why do they promote it as a dfeature with their Freedom Essentials package that comes with call waiting? Does anyone know what is going on? I need this feature to work for me.

Also in the cases of incoming calls or if you place a call and forget to dial *70, in many states you can use 3 way calling to click over and dial *70 to activate Tone Block while on a call. You will hear 3 short confirmation tones and will then be returned to your other call. HOWEVER, do this with care because in some areas there will be a charge for using the 3 way calling if you do not have a monthly subscription to it. In other states Verizon will permit you to use 3 Way solely for the purpose of activating Tone Block without a charge. So check to see what the rules are where you are beforehand.

Similar Messages

I have created a PDF with mp3 audio clips, the file works on PC's with audio playback (WIndows 7, 8 ) however the audio does not play when hosted on a website or an ipad/tablet computer or smart phone when used with PDF reader

I have created a PDF with mp3 audio clips, the file works on PC's with audio playback (WIndows 7, 8 ) however the audio does not play when hosted on a website or an ipad/tablet computer or smart phone when used with PDF reader

adobe42135678 wrote:
the audio does not play when hosted on a website...
When viewing in what browser?

I am getting no sound on my macbook pro. The sound does not play when I plug in headphones either. I have tried making it louder quieter, restarting my computer, HELP!

I am getting no sound on my macbook pro. The sound does not play when I plug in headphones either. I have tried making it louder quieter, restarting my computer, HELP!

There are many possible causes for this issue. Take each of the following steps that you haven't already tried.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. If your model has an audio-out (headphone) port, and anything is plugged in, unplug it before putting the system to sleep.
3. If you've installed something called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and reboot. You should do that even if the software is not causing the problem, because it's useless.
4. If you've installed an equalizer called "Boom" or anything similar, update or delete it and reboot.
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select the Output tab. If the Mute boxes are checked, uncheck them. Move the Volume sliders all the way to the right.
7. If a red light is coming from the audio-out port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Reboot and test.
9. Boot in safe mode. Don't log in; just reboot as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
10. Reset the NVRAM.
11. Reset the SMC.
12. Reinstall OS X after backing up all data. For a possible shortcut, see this thread.
13. Make a "Genius" appointment at an Apple Store.

Why video does not play when embedded in a PDF when viewed in Windows 8?

I have a situation where video must be embedded within the PDF document and it was working for us using older versions of IE and on 32 bit machines and using acrobat X. When the same file was tested on Windows 8 it looks good and behaves well except the embedded video does not play. The same video (.mp4) will play on the new OS if it is not embedded in the PDF.
Is this because the PDF is looking for a 32 bit flash player? Am I doing something wrong and/or is there a fix for this situation?

Are you watching the pdf file from Adobe Reader?
Windows 8 by default has a diferent reader for pdf files that does not support rich media elements.

Mp4 file does not play when exported to swf?

I am putting together an interactive flash file that I have created in inDesign (CS4).
I have had no problems creating and exporting links, buttons etc, but when it comes to embedding video I am experiencing trouble..I have a video which I have converted to mp4 H.264 format, and there appears to be no problems when uploading but when I export, the video does not play, and there is just a black box in its place with no controls. I have tried converting the file into various other formats, all with no luck. I hope you can tell me where the problem lies!
Thank you

Support for placed videos in exported SWF was introduced in InDesign CS5 so it does not suppose to work with CS4...

FLV File does not play when published to my web server

Hi. I have created a short video in VC3 and selected the FLV option to create a web page. When I uploaded the entire file content to my web server (windows 2003 server hosted at Network Solutions) the FLV file will not play. Now... if I do the same with a WMV tile, the video plays.
You can view the file at
http://www.airforcehomeseller.com/videos/va_education/VATutorials/index.htm
We have another video published in WMV format, although the video vs audio sync is out of wack at the moment, at
http://www.airforcehomeseller.com/videos/Energy%20Pricing%20101/index.htm
What am I doing wrong?
Any help would be greatly appreciated.
G-II

Hi again
You should probably double-check to ensure the standard.js file was also copied in when the HTML page was imported. It should be there but it never hurts to double check.
You might also perform a double-check to ensure things ended up in the correct folder (if you are organizing your project into folders). It could be that you moved the HTML page into a different folder and orphaned the JavaScript file.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

HideEffect does not play when setting visible to false

HY,
If i set a fade effect on WindowedApplication on hideEffect when i put visible to false, the fade effect does not run anymore. I found this similar problem in the bug tracker: http://bugs.adobe.com/jira/browse/SDK-14615
I use Flex builder 3 with the sdk 3.2.0, i don't understand why this bug is not resolved at this time.
thanks for you help

Hi,
If you are in a country that permits redownloads, delete track and go to iTunes Store > purchased and redownload. http://support.apple.com/kb/HT2519
Jim

What Greeting does unity play when it encounters a Holiday

If we have a check mark in "Observe Holidays" what gretting will unity play when it encounters a Holiday?

Hi Dustin,
Holiday Settings
When a Holiday setting is in effect, Cisco Unity plays closed greetings and observes closed transfer rules.
From this good doc;
http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_administration_guide_chapter09186a0080443b5e.html#wp1548625
Setting up a Holiday Greeting for Cisco Unity
http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_tech_note09186a008011aa09.shtml
Hope this helps!
Rob

My voicemail greeting does not play

The greeting that tells user they can leave a message does not play

This is a carrier issue, contact them.

Media does not play when selected!

My Problem:
Any song or video I select does not proceede past 0:00 on the counter, despite the "play triangle" being displayed. Everything displays correctly, and it even feels and sounds like it's booting up the song/video and loading it, but no audio comes out and the screen remains black on videos.
What I've done:
Reset it many, many times.
Drained the battery completely, pluged it in, and fully charged it.
The 5 "basics."
Nothing was purchased from the iTunes Store.
I would appreciate any help or thoughts on how to fix my $350 hunk of junk.

*Nothing was purchased from the iTunes Store.*
You need to determine if the music meets Apple's specifications. I would also suggest that you invest 99 cents and find out if music from the iTMS works properly. That will give you a reference regarding your non-iTMS music.
*I would appreciate any help or thoughts on how to fix my $350 hunk of junk.*
Sure. The iPod should function correctly regardless of whether or not the music complies with the specifications.

HT1848 when i purchase music on itunes and sync my iphone5 the new song appears twice -- one version that does not play when you click on it and another that plays. why is this happening? what can i do to remove the version that is 'fake'?

I bought music from itunes and synced my iphone5 to get the music on it. The problem i am having is that 2 versions of the song appear on my iphone -- one light gray 'fake' version which doesnt play when i click on it and another real version. can anyone help why this is happening? and how i can delete the 'fake' version from my iphone?

If that's the best you can do why don't you get on another forum?

Sometimes Sound does not play when playing multiple Sounds simultaneously

This is also a best practices question, too.
I built a game that uses a lot of different sounds (about 48 I think). Many are short, less than a second, and a few are longer, music cues, etc.
Example problem: Sometimes when there are a lot of sounds playing and a music cue is suppose to fire, the music sound doesn't play. I made a trace on the function that plays the music sound, and that function does execute. Are there limits on how many sounds can be playing simultaneously? (This doesn't only happen to a particular sound , could be any sound)
Also, as far as best practices, If there is a sound that could be played multiple times simultaneously, should a new instance of that sound be created each time its played? If there is only one instance of that sound, will the previous playing of that sound be cancelled when called to play again?
Thanks,
Adam

Thanks.
I guess I could add channels to an array as they start and remove them from the array when they are done playing to keep track. That way when an important sound, like a music cue, is suppossed to play I can check the array stop enough sounds to allow the music cue to play. Hopefully it wont be too much overhead with all those listeners.

Video does not play when imported from FCP

When I import a clip from FCP into motion the clip opens up however only one frame shows up in the motion viewer. When I press play, there is no video..only that particular frame that was showing.
The media tab shows the .mov file, and plays it in seperate window when i double click on it.
Thanks for helping me out.

How do you bring the file into Motion and what file are you actually opening in Motion?
Are you exporting your FCP project as QT? or
Are you sending your FCP project to Motion?
Regards,
Hisham

Ringtone successfully loaded onto phone but does not play when called

Hello forum!
I successfully purchased a ringtone, re-authorized my account, and loaded the tune onto my iPhone. Settings shows that I have selected this as my new ringtone, and the phone plays it back to me when I adjust the volume, &c, but whenever anyone calls me "Marimba" is played instead.
What's the deal here? Any suggestions?
Message was edited by: emichan032

For the heck of it which can cause no harm, try a Reset - press/hold the Home key and Sleep/Wake key simultaneously until you see the white Apple logo and then release.

First Second or Two Does Not Play When Switching Tracks

It seems that if you leave the AppleTV to play a playlist, it buffers the first second or so of the next track. However, if you manually skip a track or on starting a new playlist, the first second or so doesn't seem to play.
Is there a way to cure this irritation (other than not interfering with the plyalist!)

hi
same thing here, except that i do not have a quicktime movie on the first slide. my first slide contains images and text and should turn to slide 2 after 5 sec - but it won't - only during the first run.
it's probably the same issue.
looking forward to a fix.

Busy greeting does not play when I am on another call

Similar Messages

Maybe you are looking for