Busy message...

Whenever I call my contacts Skype to go number, the automated voice recording states that the contact is busy and to try again later. This happens every time. Especially when she is not busy. She has no problem calling my cell, I find it hard to understand why I can not call her cell from mine. Please help.

brown wrote:
Can anybody help??
Hello,
Please file here:
https://support.skype.com/en/faq/FA1170/How-can-I-contact-Skype-Customer-Service
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Similar Messages

HP ePrint Home&Biz app not working. Print job failure:busy message appears on tablet

I have an HP Laserjet P1102W and am trying to print from a Viewsonic tablet (android OS) using the HP ePrint Home&Biz app. I can send an email to the printer via the tablet and it prints the document with no problems.
I apologize in advance for the long message...
If I try and hit the PRINT key on the lower bar (which says 'HP Laserjet Professional P1102W (NPI7...host name), all that happens is blue & green LED's come on, green, blue flashes, green, blue flashes, green, blue flashes, then green and blue stay on steady. Just before the blue and green come on steady at the end, the "print job failure:busy" message flashes on my tablet.
I assume the sequence of LED flashes is the HP printer receiving a print command 3 times and can not perform the task because the printer thinks it is busy.
After searching for this problem on the net, it would appear I am not the only person with this issue. And yes, I have tried powering down my modem, printer, PC, and tablet and restarting all the above. Not that the PC has anything to do with it, but I am desperate.
Does anyone have a viable working solution to this problem???

Hello,
Thanks for the post. With this one, there is a firmware update available for the printer, and I've included a link below that with some excellent steps to check regarding this issue. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw_lang=&product=41103...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02933944&cc=us&dlc=en&lc=en&product=4110396&tmp...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

HT1526 I'm trying to delete files from the trash and an .InProgress file in Time Machine that cannot be moved to the trash. I cannot unmount the TM disk either. If I use the chflags -R nouchg command, I get a "Resource busy" message. Any suggestions?

I've got one or maybe two problems. Time Machine routinely crashes and there is a file in the TM folder that is an .InProgress file at the end of successful backups. Can't delete it, even using various sudo commands in Terminal. These come back with a "Resource busy" message.
Similarly, there is a Microsoft Office alias in my trash that will not delete, again including various delete or Terminal commands. Also "Resource busy"
I can't reformat the TM volume since it cannot unmount and it also cannot unmount the whole disk, which contains some other backup files I'd rather keep.
Any suggestions?
Mike

I'm not sure I can be very helpful since I was doing a lot of things and ultimately the problems went away. But one thing that definitely seemed to help was to shut down, restart, do something, shut down again and repeat. So with a clean start, try to move the file to the trash. If that works, shut down restart and look to see if it is still in the trash. Empty the trash. Shut down if it appears to empty and then restart. It seemed sometimes that the computer was doing what I wanted then something was overriding this and restoring. The shutdowns immedately after I could do something but before it engaged an override operation seemed to keep this from happening.
Sorry to not have more to offer but...

HT204135 what can I do about the "the printer is busy" message?

Looks like is a problem to use some printers with 10.7.4.
"The printer is busy" message is show after I "re-dowload" the proper printer drive from Canon (I have a IR-ADV C7055 Canon printer).
Any help?
Salta 520

Try powering down the printer or doing a reset on the printer.

Difference between Business message and application message

Hi B2B Gurus,
Can you please explain the difference between Business message and application message?
Regards,
Praveen

Hi Praveen,
Business message status reports identify business message instance details for a document protocol. These details include the sending and receiving trading partners, the agreement name, the business action, the business message ID, the status, the exchange protocol and document protocol, and message details.
Application Message Reports provide information related to the SOA Composite—the name, version, and so on, if a back-end composite application sent or received the message.
Regards,
Anuj

Error Logging in B2B Business Message Status Reports and Error Reports.

Hi,
Could someone please let us know as to how the error messages are being shown up in the b2b frontend in the Business Message Details Report and Error Reports.
In some of the cases the error message logging is not happening properly and even against the valid transaction block the entire iAudit Report or the B2B Analyzer report is getting posted .
In some cases the error message is logged as AIP-51505: General Validation Error (for the transaction block which is valid and having no errors)
Is there any way from the b2b backend these error messages and business messages could be traced or is there any other way wherein the proper and relevant error messages could be tracked from B2B.
Thanks
Sachin.

Hello,
Business message status reports identify business message instance details.These details include the sending and receiving trading partners, exchange protocol,document protocol, business action and its state, message date, and message details.
Error status reports identify error message details. These details include the error code, error text, business message identification, message date, and message details.
Please fix up a telecon to 918041086150 for further discussion on the same.
Rgds,Ramesh

I am trying to test an 810 an am getting an error in the business message

I am trying to test an 810 an am getting this error in the business message report.
Machine Info: ("Client host name")
Failed guideline.
Version: Oracle Application Server Integration B2B, Release 10.1.2, Build dev_B2B_10.1.2.3.0_SOLARIS_RELEASE.

Hi Anuj,
Thanks for responding.
Its an outbound 810. There are no internal properties in the payload. The error message report states the following
Machine Info: (oracle.lhdottie.com)
Failed guideline.
error code is AIP-51505.
There are no <Internal-Properties> in the xml payload.
Is there anything else I need to look at?
Vijay

I keep getting Server Busy Messages when opening CC programs

Ever since the latest iteration, I've been getting Server Busy messages when opening programs in the CC. They can be gotten around, but are annoying. Is this a new bug?

Please read, and reply back here with information https://forums.adobe.com/thread/1499014
-and try some of the steps such as changing browser and turning off your firewall for downloads

Business Messages In ODI operator

Guys,
Iwas trying to add some business messages in odi operator when an interface fails as part of ko step through odi procedure,
and iam using your link http://odiexperts.com/how-to-show-business-messages-on-operator-and-too-debug-variables/.
I have done exactly like what was mentioned in the link i.e creating option and a procedure and add a value to option to the procedure in package etc,but it is not firing when an interface fails.is there is anything extra we need to do? or is there is any otherway we can do this?
Thanks for your help.

Hi Jim,
Can you pest the code you have written ??
1st create a procedure. 1st setp:
Technology java beanshell:
throw new Exception("\n\n\n\n My error message \n\n\n\n");
just copy above code and pest in your step. Then execute that procedure.
See if you are getting the message in operator or not. This is for testing purposes. If this works then add the option in to the procedure as suggested by odiexperts.com
Thanks.

Scanner is Busy message

I have an HP Photosmart 5520 Print Scan Copy Web. It is connected wirelessly to an HP Pavilion running Windows 8.1 It was working fine but now when I try to scan something I get “Scanner is Busy” message, but it isn’t. I can still print and copy, but just not scan.
This question was solved.
View Solution.

Hi Kenneth3,
Welcome to the HP Forums.
I see that you are having some issues when attempting to scan to the computer.
I suggest that we start off by running the HP Print and Scan Doctor.
Let me know if you see any error codes or messages.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Enterprise business message

How to load a EBM(enterprise business message ) which is xml file into a table . EBM has data in the message i only want to load the data from message

Use the ODI XML Driver.
See http://download.oracle.com/docs/cd/E14571_01/integrate.1111/e12644/xml_file.htm#CACDHIBF

Opening PDF File in VB6. Application is Busy message: Switch To or Retry

Hi
A legacy VB6 app uses an OLE Container to open up a PDF file in Adobe Reader, with the below code:
[CODE]
        App.OleServerBusyRaiseError = True
        oleContainer.Class = olePDF
        oleContainer.AutoActivate = vbOLEActivateAuto
        oleContainer.SourceDoc = txtImageFile.Text
        oleContainer.CreateLink oleContainer.SourceDoc
        oleContainer.HostName = App.FileDescription
        oleContainer.DoVerb vbOLEPrimary
[/CODE]
The users have started reported instances of this leading to the following message:
"This action cannot be completed because the other application is busy. Choose Switch To to active the busy application and correct the problem"
With options to 'Switch To' and 'Retry'. Selecting these options do not do anything.
Any ideas how to resolve?
A few observations:
1. The are running on Server 2008 R2 64bit
2. The are running Adobe Reader v10.1.4
3. I have also noted Adobe reader 9 is also installed
4. I note that when this occurs there is more than one instance of AcroRd32.exe listed in processes. If I kill these processes the message disappears
5. The user have reported it does not occur all the time
6. When I have been able to recreate this in my own environment by reducing OLERequestPendingTimeout the problem is resolved by selecting 'Switch To'. Selecting 'Switch To' does not resolve this problem for my users.
7. When calling this code in my environment Adobe Reader opens in front of the VB6 app. In the user's environment it opens behind the VB6 app.
Thanks in advance

You need to switch from using VB6 at this point. As of the latest update, VB6 compiled applications will stop working with Adobe Reader. See the following KB:
PDF applications built with VB6 don't work with Acrobat 11.0.07

Business messages are not pushed back to the aq exception queue in case of errors

Hi,
I have the scenario, where I have configured the business events in ebs and implemented the soa interface which consumes the event message from wf_bpel_q.
SOA interface is able to pickup the messages succesfully and same message will be pushed back to the same queue with the status=READY in case of exceptions as well. Ideally as per default functionality of AQ, in case of errors, messages will be pushed to exception queue.
Please suggest why mesages are not pushed back to exception queue in case of errror scenarios with the status='Errored'. Please let me know what i have been missing here in the setup.
Regards,
Anjana

Hi Anjana,
I am not familiar with the SOA interface, so I can't help you in detail, but take a closer look to the following documents.
Doc ID 1374461.1 , Doc ID 1075611.1 , Doc ID 1356146.1
Maybe you hit a known bug ....
Hope that helps.

'server is busy' message blocks all use

In my Lightroom 2.7 suddenly I often get the following message (free translation from Dutch):
''Server is busy.
This action cannot be completed because the other program is occupied. Click on Activate to switch to this program and solve the problem.''
The options are Activate (opens Windows Vista startup menu), Try again (does nothing) and the option Cancel (greyed out). It is impossible to shut down this message and Lightroom cannot be reached as long as the message window is still open. The only way is to shut down the program the hard way.
I have no clue what 'the other program' can be. I have the feeling that maybe some other process is blocking access to disk (backup, desktop search, ...?)
how can I find out wich program is causing the problem?
How can I close thes message window?

I posted this in http://forums.adobe.com/message/3289580#3289580
I've found "the" solution.
Windows Vista Ultimate 32bit. (it should work for any version, Vista, and 7)
I tried turning off windows search and superfetch.
That didn't work for me,
I tried disabling the windows search, and superfetch
I tried deleting the catalog and creating a new one.
I tried uninstalling and reinstalling
Nothing.
Same thing, Server busy, and when you click on switch to it opens the start menu.
You have to disable the two. Windows Search, and Superfetch.
1st turn them off under Administrator, Services
Right click and click disable.
Then right click and click on properties.
In the drop down named Startup Type: move it to disabled.
Repeat for Superfetch.
Then reboot into safemode.
Open Lightroom there, either 3.2 or 3.3rc3
Create a new catalog, import a photo, try to print.
You won't be able to print but it will keep that action.
Reboot into windows normally.
Open the program, and there you go. It will be functioning normally.
The problem seems to be that the catalog gets corrupted and the program can't open, even if you delete the catalog there is a remnant that stays with the program.
You most likely do not have to try to print, but it worked for me.
Let me know if this solves it for you.
Thanks guys!

About custom Enterprise Business Service and Enterprise Business Message

Hi.
I need to implement an AIA integration that will use only a part of an EBO, in this case SalesOrderEBO\SalesOrderReceivedPayment, and and will call the ProcessSalesOrder operation in EBS.
In this case, the best practice is to use the default ProcessSalesOrderEBM and ProcessSalesOrderResponseEBM as well the Process operation of the SalesOrderEBS or to create a new EBM message (ProcessSalesOrderReceivedPaymentEBM) and EBS operation (ProcessSalesOrderReceivedPayment) in the custom files (CustomSalesOrderEBM and CustomSalesOrderEBS) ?
Thank you.

- In SLD while creating the BusinessSystem, the I_SWCV is assigned to it. That is the reason you can able to see the interface of I_SWCV. Assign the A_SWCV to the Business System in SLD, you can able to see interfaces of that too.
Assign the A_SWCV to the Business System .
i wanna find out the interface of "basis object" of A_SWCV. but i can not.
may be since it is not really within A_SWCV of the interface of "basis object" of A_SWCV.
actually. it is within I_SWCV.
you got me?
is that so?

Busy message...

Similar Messages

Maybe you are looking for