Busy signal when faxing with hp officejet 6600 all-in-one

I keep getting a busy signal when faxing with all numbers.

Hi @pbr69,
Welcome to the HP Forums!
I noticed that you are getting a busy signal when faxing with the HP Officejet 6600, and I am happy to help!
I would recommend to look through this faxing guide, to make sure it is properly configured. Cannot Send or Receive Faxes.
Also depending on the type of phone connection you are using you may require a different type of configuration. Please also see, How to connect your HP Fax Device to an ISDN, ADSL, PBX, or VoIP line, if you are using one of those types of lines.
Hope this information helps, and have a wonderful day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Similar Messages

Fax issue with HP OfficeJet 7210 All-in-one

Hi everyone,
I've got an issue with my HP OfficeJet 7210 All-in-one printer/fax (USB connection)
I'm under Mac OS X 10.5 (Leopard).
When I was under Tiger, my printer/fax worked properly.
After the upgrade to Leopard, the printer/fax was still installed (HP 7210 was displayed as installed in the printer list of the System Preferences).
The printer works fine but the fax doesn't ! An error consistenly occurs when I try to send a fax.
Thus, I decided to uninstall every HP components from my Mac. Then I proceeded a fresh install of the CD software/driver I received with my printer/fax.
During the installation, I get an error : "HP AIO TRAP has quit". I went further and continue the installation till the end by ignoring the problem.
The printer is still working fine but I'm unable to install my fax in the System Preferences because the fax simply doesn't appear either on the "Fax" tab or on the "More printer" tab.
Only an unuseful "Bluetooth" fax appear, I can install it but it's impossible to send a fax with it : http://users.cybernet.be/ptsalos/hp-leo1.png
In the "More printer" tab I got this : http://users.cybernet.be/ptsalos/hp-leo2.png ... It seems that no fax are detected (no fax are displayed in "HP AiO Télécopie" and the "Add" button is gray).
I hope you could help me !
PS: the fax works properly under Bootcamp with Windows XP PRO SP2
Thank you very much.
Message was edited by: phl00

OK, so enough software is available (or will so been available) for me to start posting these types of workarounds (and getting more of you up and running). And remember, what I am about to tell you is NOT supported by HP, so if you run into problems doing this do NOT call customer support. I am posting this stuff here to try to help out the community. I will stop posting if this gets abused (even once).
If you have an HP OfficeJet 7310 or 7210 printer, go to HP.com/support, tell it you have a 7410, and download the installer (follow my instructions on the [Beta Announcement|http://discussions.apple.com/thread.jspa?threadID=1252889&tstart=0 ] thread if you need more details.
Now follow these instructions:
Step 1: Run the installer, and follow the onscreen prompts.
Step 2: When the screen comes up to select your printer, check the box my printer isn't listed and continue.
Step 3: On the next screen select the OfficeJet 7400 Series and continue.
Step 4: Select the type of connectivity to your device.
Step 5: Install the software (this may take several minutes).
Step 6: When you get to the Setup Assistant, skip it. Make sure you de-select the two checkboxes before you continue otherwise it will remind you every time you log in.
Step 7: Go into the Print & Fax System Preference and manually add your print queue.
Step 8: Go into the Print & Fax System Preference and manually add your fax queue.
Step 9: Start using your device.
Congratulations, you now should have a fully functioning device under Leopard. So what won't work with this work around:
1) The documentation on your device will be wrong.
2) If you did not previously set up a station ID for the fax, one will not be set.
3) Device Manager will not know anything about your device so the functionality there will be pretty useless (most stuff can be done through other means though). However if you already have a Tiger install, even this should (theoretically work).
4) Good question, if you run into any other issues post them here, I may have forgotten something.
WARNING! WARNING! WARNING!
Please install the final drivers when they come out, and preferable the beta drivers too for your device too! Just because things are working for you does not mean that this configuration is supported (its not) or that there aren't any known problems (there may be, we certainly don't test it) so please take caution and update when possible.
Just trying to help.
Andrew

Communication Failure With HP Officejet J6480 All-In-One

I bought a new printer, an HP Officejet J6480 All-In-One, and set it up with my PC.
Then, I set it up with my mac. I get this error: "Communication Failure: The computer is no longer able to communicate with your printer. Turn the printer off, check your printer connections and check for printer errors, and turn the printer back on."
I recently bought an Epson printer but returned it cause it was too slow. That printer gave me a similar (maybe the same, I don't remember) error. I can scan and check ink levels but I can't print. I'm connected by USB by the way.
What's wrong? I downloaded the latest drivers and software yesterday. Why can't I print?

And on HP Photosmart C7280 All-In-One.
I've got mine connected to the network on Ethernet - figured that would be less problematic than wifi - and my MacPro can see everything about the printer, just not print to it. This includes the C7280's built-in webserver which - like alot of SOHO routers - gives you a web-based interface to the printer's configuration and status. Everything on that page looks right-on, but no printing.
The printer's copy and fax functions work, and I can even scan images and save them across the network onto my machine, so the printer is already interoperating with the network to a high degree, just not printing.
Like alot of people, I bypassed the HP driver CD and downloaded a fresh software package yesterday from HP's site (200MB+, ***?), which is what I used to configure my system. As far as I could tell, there appear to be no firmware updates available for this printer. MacOS "Software Update" doesn't offer any printer driver updates - I'll try the posted link to Apple's site next.

Computer is unable to communicate with printer Officejet J4680c All in One using wireless setting.

I received a message while I reinstalling software and driver to change from usb conection to wireless conection: Your laptop is unable to communicate with your printer (Officejet J4680c All in One. This may be caused by firewall software. If you are using firewall software, verify that UDP port is unblocked for both inbound and outbound trafic. But I don't know how to verify that option in my computer. While I reinstalled software I turn off firewall software in my computer. Can some one help me to resolve this issue? Thanks.
Ref: My laptop is Toshiba Satellite P755 with Windows 7 (64bit)

Hi,
Download and run HP Printer Install Wizard from link below
www.hp.com/go/tools
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Officejet 6600 All In ONe

When I try to print an envelope with a picture int he left hand corner with our return address -- it deletes the picture and won't print it. How do I fix this problem?

Hello rfrantz,
Welcome to the HP Forums!
I see that your HP Officejet 6600 will not the picture on your envelopes. I am happy to help you with this printing issue!
For further assistance, I will need to the following information:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, or USB.
If the printer is able to make copies by itself.
If the power cable plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
The size of the envelope.
The program you are printing from.
Hope to hear from you, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Officejet 6600 All But One Laptop Can Connect To Wireless Network Printer

One windows and 2 macs can connect to the wireless printer over the newtwork just fine but one (Windows 7) will not. HP Print and Scan Doctor can discover the printer from that laptop as "visible" but repeatedly says " need to install full software" which I've done, and after, it runs install wizzard reports, the IP address I've entered is wrong, which it's not. Firewalls are off. I've un and re installed, tried windows add device which can't connect either. I've had this problem before with this laptop but just can't remember how I fixed it. I remember getting to a screen that offered the option of installing over a nework or wireless directly to the printer and over the network fixed it, but I can't remember how I got there. Any ideas as I'm at wits end. Thanks

Welcome to the forums @Davidchicago ,
I read through your post about the installation troubles you are having with one of your Windows 7 computers and your Officejet 6600. I am here to let you know what my suggestion is for you!
There could be a program blocking the installation and causing the problem. I'd recommend a Clean Boot, restarting your PC, disabling your firewall and running through the installation again.
Hopefully that will get you through the install. Let me know the results!
Have a great weekend
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Need cd for officejet 6600 all in one.

Need the cd to install my printer

Hi,
You won't need the CD. Please download software and drivers from the following link:
http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-6600-e-All-in-One-Printer-series---H7/4...
But if you wish, you can order a CD using the last item of the above link.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Issues with installing Officejet 2620 All-in-One

I'm having problems with installing my Officejet 2620. I've installed the correct driver for my OS, but every time I connect the printer to the laptop via USB I get an error message saying 'USB Device not recognized; the last USB device you connected to this computer malfunctioned, and Windows does not recognize it.' I've read where this could be because I no longer have Windows 8, but rather Windows 8.1, as opposed to an error with the actual printer, which seems to work fine aside from the lack of communication with the laptop. My OS Windows 8.1 64-bit. Please help!

Hello hackman19,
Welcome to the HP Support Forums! I understand when you plug in the USB connection to your HP Officejet 2620 you get an error message 'USB Device not recognized; the last USB device you connected to this computer malfunctioned, and Windows does not recognize it.'
After some research I was able to find this thread on www.wiknix.com:
Solved: USB Device Not Recognized In Windows
Please try the above recommendation and let me know the outcome, I will watch for your reply.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Printing Mirror Image on HP Officejet 6600 All In One

Trying to print an Avery (Microsoft) T-Shirt Template. I am running 64bit Windows 8.1. I have tried everything to access Mirror Image on my Printer but I cannot find Mirror Image anywhere. After I click on PROPERTIES I am only shown"Lay Out' & "Paper Quality". When I click on "ADVANCE SETTINGS" in "LAYOUT" there is "PRINTER FEATURES" This only shows "Print in Grayscale"; "Resolution"; Output Quality": HP Realife Technologies"; Borderless Printing" & " Print all Text as Black.. I have been trying for the last 7 hours to try and figure this out. Hopefully someone can come up with a solution. My warranty ran out 2 months ago so HP Support wasn't very supportive.

Hi,
Pleae try the following instructions:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=bpu02032
Other option using Word:
http://www.techrepublic.com/blog/windows-and-office/quick-tip-flip-text-for-a-mirror-image-in-word/#...
My suggestion: flip image before print. You can use a photo editor to flip images.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Massive problem with HP Officejet J4580 All-in-One

Recently I've reloaded the cartridges and when I want to print something, on the print's screen writes "Problem at printing cartridge: [Black]. Consult the documentation of the product, for troubleshooting". It's not the first time when appears this message, last time I had to buy a new cartridge.
What should I do?

First, ensure that it is the correct cartridge number. If it is, take it back to where you bought it and exchange it for a new one.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Uninstalling the drivers and programs for Windows 7 SP1 64 bit of the OfficeJet 7410 All-In-One

Hi
Which utility should be used to properly and completely uninstall the drivers and programs for Windows 7 SP1 64 bit installed with the OfficeJet 7410 All-In-One printer?
Thanks
Bye
balubeto

Hi @balubeto
I located a software removal utility for you but if you have other HP printers or scanners you may perform the more basica uninstall.
Software and Driver Removal Utility
Uninstalling the Printer Software (more basic uninstall)
I hope this resolves your inquiry.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Error message fax scan canceled on officejet 4500 all in one when faxing from the solution center.

I keep getting the error message fax scan canceled on my hp officejet 4500 all in one when I try to fax from the hp solution center,I have no proplem faxing from the officejet 4500 itself. I appreciate any light that you can shed on this matter.Thank you.

Hey @kburns7934 ,
I just sent you a private message. If you are not sure how to check your forum messages this post, has instructions.
Enjoy your Monday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Busy signal when trying to call out while vacationing in Puerto Rico. How can I fix this problem?

Busy signal when trying to call out while vacationing in Puerto Rico. How can I fix this problem?

Lmercer81,
Thanks for the update! Let's continue to take a closer look. What model phone do you have? Do you have any bars of signal on the device? Has this effected data or text? Are you able to receive incoming calls?
EfrainM_VZW
Follow us on Twitter @VZWSupport

Busy signal when is not

Hi
Need some help.
I got a Ipnone 5 Iso7 software, been working fine sence update.
But i got a wierd problem:
When i call my Mom & Dad i get a busy signal when there Iphone 4 Iso7, is Not busy.
i call everbody else i have in Contact, no problem
My mom & dad can call me and everboy else they have in there contact.
I have made a full factory restore, did no solve the problem.
Any seduction will be appreciated .
Robin

I read some where that if a contact is blocked, via the new ability in iOS7, that a busy signal is heard. However, I tested this and it didn't seem to be the case for me. I on my end, I heard about 1.5 rings then it went to VM.
So have your parents check to see if they have you blocked in their Contacts.
KOT

Cannot scan, fax, or copy from HP Officejet 6500 All-in-One E709a

I can print from my HP Officejet 6500 All-in-One E709a, but I cannot scan, copy, or fax. All drivers and updates are current; no recent updates were made prior to the problems occurring. I use Windows 7 64-bit. When the printer is turned on, it always shows Original Loaded, but no documents are in the feeder or on the glass (I have already cleaned the glass and have ensured that the cover sits tightly). I am having problems scanning, copying, and faxing. The automatic document feeder is functioning. I have tried to reset the printer several times.
When I try to Scan a document in the document feeder (it does feed through) or from the glass, I get variable responses – rarely, it appropriately asks how I want to save/handle the doc (e.g., save as pdf), but the document does not actually scan and I am directed to Reload the document OR it displays No Scan Options. The document does not show in My Scans.
When I try to Copy, it shows the document as copying, but there is a long delay before the progress bar occurs. When I copy using the document feeder, I actually get a copy (rarely and always faded-looking) or the copy prints out blank—both results are always followed by an error message to Reload the document. When copying from the glass, the copy prints out blank with an error message to Reload the document
The same problems occur when trying to Fax. Whether trying to scan, copy, or fax, the printer is making a lot of sounds of gears whirring.
Again, I can print a document from my PC without any problems – the problem is limited to scanning, faxing, and copying.
I have tried the HP Print & Scan Doctor. It always stops at the HP Twain Scan step, saying the Scan process was cancelled by the user (not true). When I click on Continue, it proceeds down to the Test Scan step, but nothing happens when I click on the Test Scan button. It will only allow me to Skip at that point. All of the other steps show green checks.
This question was solved.
View Solution.

My first question is really going to get to the core of the issue, I heard you say that the printer makes sounds, but if you lift the lid does the bar A) travel across the screen and B) light up?
Additionally, perform both of these resets and let me know how they go!
HP Multifunction Printer Resets - HP Officejet 6500 - YouTube'
Have a great day!

Busy signal when faxing with hp officejet 6600 all-in-one

Similar Messages

Maybe you are looking for